I have structured a subform as a datasheet to allow users to copy and paste from Excel into the database. Datasheet has numerous fields and 18 rows. I have set up recalculations of other data in the AfterUpdate event of the fields in the datasheet. This works perfectly until the user copies multiple rows from Excel and pastes them (one column at a time) into the datasheet.
Is there an event I can capture when the user copies and pastes a column?
Muchas-Grasias for any assistance.
I have an "After Update" event procedure for a field on a form that calls a VBA sub. When I use a different VBA sub to input a value in the above mentioned field, the "After Update" event does not occur, even thought the data in the field has been changed. (Of course if I manually enter the data, the field "After Update" event works.)
Is there a flag or condition that needs to be set in my VBA sub to let the field realize that it has been changed? Or possible a way to call the fields AfterUpdate Sub?
I tried having a my sub call the AfterUpdate sub to see what would happen, but didn't get it to work. I got a bunch of error and didn't feel like this was really the way to go.
I also could just duplicate all the code in the AfterUpdate sub for the field, but we all know that that is not a good idea.
I have a split, shared database in which the Before and AfterUpdate events on my forms are not working at all. I tried setting a breakpoint to verify this and, sure enough, they are not firing.
Does anyone have any clue as to why this may be occurring?
Thanks so much for the help. I have tried searching the forum with no luck.
On a form I have a pair of controls, Price and PriceInUSD. If the user enters a new value into the Price field, then its AfterUpdate event fires, which looks up the relevant exchange rate and updates the PriceInUSD control accordingly. That all works fine.
Now in some circumstances (if a checkbox elsewhere on the form is checked), I generate a modal dialog box asking the user to confirm that the Price value is correct, or enter a new value.
That modal dialogue box's Enter button's On Click event then updates the Price control before closing the dialog. That bit works fine, too - but I had thought that this update of the Price control would fire its AfterUpdate event - but it doesn't.
So, my basic question is : do Control events only fire in response to user input, and not to programmed changes ?
I have an issue with the dblclick event not firing immediately from my listbox. It does eventually fire if i mash the mouse button for long enough but obviously that is not an acceptable solution.The listbox also has an afterupdate event which is what fires when i double click.
I have also tried calling the code from an onclick command button which works fine but if i try and call that from the dblclick event it does not.
I have used the dblclick event in other projects with afterupdate and it has worked without problem.
Code: Private Sub lstFileList_AfterUpdate() strPDF = Me.lstFileList.Column(0) Me.PDFViewer.LoadFile (strPDF) Dim fso As New FileSystemObject strFileName = fso.GetFileName(strPDF)
We use our CRM for entering client orders, which is done through our 'OrderEntry' form. On that form we have a subform that we use to enter order lines - as we have a range of products on offer, an order can be made up of one product or anything up to 100.We have an 'amount' textbox on the subform, that the users enter the cost of each line, and as they add more lines the total cost of the order is calculated using a textbox in the subform Footer, with the ControlSource set to =Sum([amount]).
On the main form, we have a Net textbox, that the user will add in the total cost of the order once they've added all the order lines, and providing the =Sum([amount]) textbox on the subform matches the figure in the Net textbox, a button to Proceed the order and go on to the next step appears.
The intermittent problem I have, is that the OnCurrent event I use to show the Proceed button does not seem to fire on its own - but when I stop the code and step through it, it will show the Proceed button without any problems.Here's the code:
(the Proceed button is referred to a 'Command80')
Code: Dim OS As String Dim UT As String OS = OrderStatus UT = fGetUserType
[code]....
I've made the part that refers to the Proceed button bold, but thought I'd add in the whole OnCurrent event in case there was anything in there that was blocking it.
I added in the MsgBox code at the bottom to make sure the OnCurrent was firing, and that works fine.I've searched through the rest of the code, and there's nothing else in there that references the Visible property of the button.I've been through the decompile process detailed here, and also been through this similar thread with a fine toothcomb and this still won't work.
I've saved the form out as a textfile and then imported it back in, both through the immediate window, and short of importing everything in to a new DB and starting again
I have to maintain an Access form which contain a linked subform (using Master and Child fields).
Basically, in the main form (Form1), the user choose a value in a combobox and the subform (Form2) is automatically updated.
My issue is that I have a BeforeUpdate event on one field of my subform which is preventing to update the field (Cancel=true) when it does not meet the criteria. The alert msgbox should appear once if there is any error in the field but the BeforeUpdate event is always fired 3 times for unknown reason.
What I don't understand is that if I open the subform (Form2) as a main form or if i remove the child/master link fields in the subform property sheet, it is working as expected with the BeforeUpdate event being fired only once.
I'm developing in Access 2007 and created a runtime version.
When the user clicks the X to close the runtime application, the main form's Load event fires. Any clues as to why this might be? Some of the code is based on other forms that do close, so of course errors start flying. Note, this is only in the runtime version; the accdb file works just fine.
My current workaround is to put the offending code into the forms On Current event, which I'm able to do in this context.
Is it wrong to think that a forms On_Load event shouldn't be firing when the application is closing?
Hi. i am very thankful for all your help in my other queries for my database. i have one last question and i guess i will be done after that. i have a form which have 3 fields one is Number and the other is group and the next one is Account. all of them are combo boxes. I am trying to add this function in the Number field text box properties in afterupdate event which is as follow
Sub Number_Afterupdate() If not isnull(Number) Then Number=Format(Number, "000000") Endif End sub
The code is working fine. i debug it and run it no errors. i want to put this function in afterupdate. i copied this whole thing in the afterupdate box and when i go back to my control form try to enter numbers in the Number field it gives me this
Msaccess can't find the macro "private sub Mynumber" the macro or its macrogroup does not exist or the macro is new but has'nt been saved.
Can anyone help me out what i am doing wrong ? or can tell me steps what to do i really appreciate that and thanks alot FONZ :)
I have a form with (among others) a Y/N field and a multivalued field. The Y/N field indicates whether or not the resident is year-round or not (seasonal/snowbird). The multivalued field contains the months the resident it here. The user wants me to auto-select all months in the multivalued vield when the year-round field is set to yes in order to minimize data entry.
I have been trying to use an AfterUpdate Event using the following syntaxes as a test but Access doesn't like the format at all:
[Master Table].[Months Available].[Value] = "June" (this gives 2465 error) Me ! [Months Available].[Value] = "June" (this gives a 424 error)
I'm not at all fluent with VBA but have been successful in populating form fields using data fields in another table so thought this would be similar.
Any way other than not to use multivalued fields? Because that isn't an option.
So I have a bound form with the following onload code:
Code: 'Add the percent completed to lblPercentCompleted by calling the function Dim Completed As Double
[code]...
This works fine and set the caption and color of a label on this form.On this form I have several (now only a few, but in the end probably 40 controls or so) which will get updated by the user. When any of these controls are updated, I want the label lblpercentCompleted to get updated with the propper caption and color, however I am having trouble doing this.
I have an afterupdate event on each control with the same code as the onload code, however the message box below appears but the label does not update.
Code: Private Sub TransferDieCutsOn_AfterUpdate() MsgBox "Updating Label" 'Add the percent completed to lblPercentCompleted by calling the function Dim Completed As Double
Hi, I'm new here and I thought I had already posted this but i couldn't find it so I am posting again... sorry if I've posted twice
When I pass a value from MyTextBox to MyComboBox using:
Me.MyTextBox = Me.MyComboBox
It does Not trigger the AfterUpdate Event of the ComboBox
I need it to! Any Suggestions??
I have tried: copy and pasting by but that creates a problem
Me.MyTextBox = BarCodeData$ 'passes the variable value to MyTextBox Me.MyTextBox .SetFocus Me.MyTextBox .SelStart = 0 Me.MyTextBox .SelLength = Len(Me.MyTextBox ) + 1 SendKeys "^c" 'copies the value of of MyTextBox
as soon as I add the below line, it no longer copies the value in MyTextBox Me.MyComboBox.SetFocus
The onEnter Event of MyComboBox has the following code that works fine.
If I ran all the code above, all works but the "Copy" and thus anything that may be in the clipboard is pasted into MyComboBox, and the AfterUpDate of MyComboBox triggers.
I know that there are compelling reason NOT to use the SendKeys but I was just trying something
What I'd really like to do is eliminate MyTextBox and pass the Variable directly to MyComboBox:
Me.MyComboBox= BarCodeData$
And have it force the AfterUpdate Event of MyComboBox
I have a form with 7 types of weights (7 textbox rows) showing 7 weights in kgs and the others in lbs.When the user update any weight-kgs textbox, the opposite weight-lbs textbox will be updated automatically, and viceversa.Now, I'd like a fast way to code this action without writing the After Update_event for every textbox (they're 14).I have already setup textbox tags differently with "WeightKGS" and "WeightLBS", thinking about using "for each ... next" statement, but I have some problems to resolve what I want.
I have encountered several times, and now, that after using any "cut and paste" or "copy and paste" on VBA code in the event sub, even for a few words, Access does not allow me to exit when I answer 'Yes' to save the changes. It forces me to respond "No" to exit and re-enter any changes again without using copy or cut and paste.
This is very troublesome and error-prone in program development that the program statements cannot be moved or copies to another location of the program module.
I have over 30 TextBoxes and ComboBoxes on the form and about 20 pages of program code, using Access 2010 (same situation for Access 2013) on Windows7 PC with 4GB of RAM.
I created a form with lots of conditional formatting that did pretty much everything I wanted it to do. The only problem is that it takes about 4 full minutes for the form to open.
As an experiment I am reluctantly now trying to display the results in Excel. I have created a template xls sheet and all I want to do is, on the press of a button, copy the results from my query and paste them in to cell a1 of my spreadsheet.
I found the following code online which I am trying to adapt.
Code: Private Sub update_tracker_Click() Dim XL As Excel.Application Dim wbTarget As Workbook Dim qdfResults As QueryDef Dim rsResults As Recordset 'Set up refernce to the query to export
[Code] ....
My limited knowledge however results in a couple of errors.
The first error User defined type not defined error appears at the very first line of my code
Code: Dim XL As Excel.Application
The next error occurs as I am not sure how to reference the query to export. The query is called 2014 Resources and outputs also to a form called 2014 Resources.
I have a form with a field called "CCN" and what I need to do is have some sort of code that will look at the table "Application Data - NE" and check to see if there are any duplicate records for that CCN on the "AfterUpdate" function and if so; spit out an error message saying "CCN already exist; please try another".
Does anyone have any ideas on how to code this?
I know how to do the custom error message; I am just not sure how to have it check for duplicates before the rest of the form can be updated/before the record is saved.
Its been a few years since I used Access, and despite searches I cant find what I'm looking for. I have a VERY simple form, with only one record on it - "address". I have some print buttons which will print that address to different size labels, and some navigation items, but only one actual record - which is "address" (in the table, this address is a MEMO)
I would like to have a command button that when clicked copies the current record, and opens an existing Excel Spreadsheet and pastes that address into (for example) cell C8
Can it be done easily? Is there a DoCmd.TransferSpreadsheet kind of secnario that works with current record only?
All I need to do is copy an excel file from a location (while coping the file, the location of the source file remains same all the time)and paste that excel file where ever I want (Browser Option) from an Access VBA.
Does anyone know how to exclude the header information when copying a record from an Access table and pasting it into Excel. When I paste into Excel, it is also pasting the header information from Access which I do not want. I only want the data to be pasted.
Hello I have a three field table viz ItemName, ItemCode, ItemRate wherein ItemCode is Autonumber. What I needed was if I select 3 from dropdown of ItemCode, both ItemName & ItemRate be displayed on the form. A combo box can use to show one value and put other, but for twin values someone sugggested to use the AfterUpdate event. Is there no other way? I don't know how to code in Access. Can you please guide? Thanks
