I am trying to learn to use MS access 2007 and have a query about copying and pasting.
Is it possible to paste the same line of text into multiple lines or do I have to arrow down and paste into each individual box?? I can highlight any number of boxes in the same column but when I click paste it only pastes into the first highlighted box.
Any help would be really appreciated.
Thanks
I have a list with 50 items in it, I would like to select some of these items by pasting in a coma separated list, is this possible?
View 12 Replies View RelatedHow do I paste to multiple cells in access 2007? Basically I want to copy one
cell in the dataview and then highlight maybe 10 cells and copy the info from the one cell into the highlighted 10 cells at one time. I had no problem doing this with 2003 but in 2007 this seems to be an issue. Any help is appreciated!
I have to redo the company I work for’s insurance program and they want it done in access. I’ve hit a big snag though. Not only are my Access skills very rusty. But also I have a very complicated task here! :)
I would need a customer table an insurer table and an adjuster table. These tables would link to a Claim table. In the claim table I need to make it show the items that the person is going to get with there insurance money by getting details from a table with all of the information for the items.
But how do I make it so you can add more then one item to the claim?
Some people may have 1 item to replace some people may have 20 items.
Hopefully someone understands what I mean here
Thanks Heaps
Ashley Colman
I am trying to enter multiple parts into the same field and using commas to separate them. Is there a way to create multiple records with the same information, but change the part numbers in them according to comma's?
Would look like this.
Primary Key Location Part number
789 bin89756 89756,87564,78965,12565,45896
I want it to do this in the end.
Primary
Key Location Part number
789 bin89756 89756
790 bin89756 87564
791 bin89756 78965
792 bin89756 12565
793 bin89756 45896
Hello to all .
Have you got any idea ?
I have a List Box in a table and it is set to permit multiple items selection
from it .
The fact is I can select, as I wanted, multiple items from it through
the Form but when I go to the correspondent table to see the results
the selected data from the List Box isn't there .
Note all data selected from the List Box is visible trough the Form but
not the table .
Has this problem anything to do with mismatch in data type configuration on the table ?
Lots of thanks in advance
Miguel
Is it possible to select more than one item in a combo box? I have attached a sample of a database I am working on. I have a table called Interests and on the Bookings form, I would like to be able to select more than one interest in the Interests combo box, but I can't figure out how to do it. In databases I have seen, you simply have to hold down ctrl or shift to make multiple selections - that's what I want to do.
Can anyone help, please?
Thank you!!
hello once again
Scenario:
I currently have a form that the users can browse through listings of items for sale. While going through the records, they can mark with a checkbox of which items to include in a report to send in an email. The check box is currently part of the listings table, and i then run a query to pull items with the box checked, then put those in to a report, then they can email.
Problem:
about 5 users use this database, so if one user is selecting items that they want it's going to cause a problem for another user to select only the items he wants since it is all updating to the same table. Ex, if I select items 2 and 3 and another person selects items 4 and 5, when I click to show the report, its going to show items 2,3,4,5. Make sense?
Solution:
Since there are only 5 users, I made them all aware of this, and also created a reset selected email checkbox button, that sets the checkbox back to unchecked so the next person can select their own items and email. There has to be a better way to fault proof this, I just can't think of one. Any ideas would be greatly appreciated!
I have made a database to show me dates that I need to check various documentation from my contractors.
Once a month I want to print out a query/report to tell me what checks need to be made in the following month.
The dates are
Licence Check
Licence Expiry
Van Ins Exp
GIT Expiry
MOT Expiry
Passport Check
Vis Expiry
I need a query table that shows a list of names that have anything to be checked in the month.
So the Column headers would be Name, Surname, Licence Check, Licence Expiry, Van Ins Exp, GIT Expiry, MOT Expiry, Passport Check, Vis Expiry.
Its easy to do a list with one date but when I add multiple dates into the query it looks for names and surnames with the date within the next 30 days for every date and therefor brings back no records.
I have attached the picture. Obviously not all the records will show dates. Some will be blank.
I am importing data from a supplier. The table has many invoices included and varying items on each invoice. I need to find a way to separate each invoice with all the included items. For example:
inv# pieces linedesc amount
11 500 nuts $20
11 100 bolts $15
11 75 washers $10
12 150 cameras $75
13 10 desks $150
13 10 lamps $50
I have an Access database that links one form to one table, so a fairly simple database. The database will average 250k records. How do I query to pull up many (ex. 100) distinct records.
Example - I want to search in a field called 'debtornumber' and want to pull up lots of various account numbers (ex - 0458714 and 0587428 and 0578925 and....). I have hundreds of the individual items to query daily (that I can paste from Notepad or word) and need to pull up all items in the query at one time.
Hi,
I would like to be able to select multiple items from a dropdown list like we often see on web forms. The kind where you hold down the control key to select up to 5 items. Is this possible on an access form? If so, how would do we implement, and how is such data be stored?
Thanks!
~Bruce
I'm trying to setup a listbox so that multiple items may be selected and removed at once. The Listbox Multi Select property is currently set to "Extended" and I have the following code on the onclick event of a command button:
Code:
Private Sub Command12_Click()
Dim i As Integer
For i = List10.ListCount - 1 To 0 Step -1
[Code]....
I have tested selecting 4 or so records on the list box and then pushing the remove button but it seems that the only record that is removed is the selected record that is furthest down on the listbox. The other selected records become unselected and must be reselected in order to continue removing records.
In my form I have the listFunctions list box set to Multi Select "Extended" in the following code contains a line to execute a query based on the selected items in a listbox. but for some reason instead of only changing the selected items it is changing all items in the listbox. I stepped through the code and it is looping the correct number of times based on the amount selected but is still changing all.
eg.if I select 3 items from the list, it loops through the execute 3 times.but the total 6 items will change.
Code:
Private Sub cmdEdit_Click()
Dim varItm As Variant
Dim sSQL As String
Dim ssSQL As String
[code]...
I have a form with a listbox in which users should be able to move the items up and down. The listbox has 4 columns and multiple selection is enabled.
For a NON multiselect box I have it working, and also for a multiple selection box but in that case it works only for one row at a time.
For a NON multiselect listbox:
Code:
cmdDown_Click()
Dim i As Integer
Dim t1 As String, t2 As String, t3 As String, t4 As String
i = selectie.ListIndex
t1 = Nz(selectie.Column(0, i))
t2 = Nz(selectie.Column(1, i))
[Code] ....
You can select an item and then press "Down" as many times as you want to put the items as "down" in the list as you want it to be.
Multiselect listbox
This code also works for a multipleselection listbox when one item is selected, however, after you press "down" the item is still selected (highlighted) as the code reselects is (last line) BUT the value of selectie.listindex apparently is set to "-1".
Pressing "Down" again generates an error (i = -1). I can evade the error by adding "if selectie.listindex <=0 then exit sub", but that doens't fix the problem that the only way I can manage to reset the listindex to the new "position" of the item is to click on it again and THEN press "Down".
To fix this and be able to press "down" multiple times listindex should be set to the new value.
Adding a "me.selectie.listindex = i -1" doens't work (error), it seems like this value is readonly.
I can't find a way to "simulate" a mousepressed selection and really set the listindex.
The other problem is of course that this code doens't support moving multiple items at once: listindex points to the last selected item, but only one.
So, I tried another piece of code to move multiple items, not using listindex (since that resets to -1), but I run into another problem
Code:
Private Sub cmdDown_Click()
Dim var As Variant
Dim i As Integer
Dim n As Integer
Dim t1 As String, t2 As String, t3 As String, t4 As String
n = Me.selectie.ItemsSelected.Count
[Code] ....
The problem with this is: I can select multiple items and press "Down", but the problem now is that the selection is lost as soon as the code removes the first item, and the 2nd loop skips the if selected(i) = true (nothing is selected anymore).
The me.selectie.selected(i+1) = true doens't work since that would only reselect the first item after moving it.
The code "forgets" which items were selected and moves only one item...So I guess I need to put the indexnumbers in memory while moving the items.
I have been searching a lot, but can only find VB-solutions. In VB it's a lot simpeler using f.e. the .list property of a listbox, which is not available in MSAccess
The solution I'm thinking about is:
- set an array with the numbers of selected items
- put indexnumbers of the selected items in the array (f.e. 3 and 4)
- move items based on the indexnumers in the array
- when moving an item update the indexnumber in the array (3>4, 4>5)
- after moving all items reset the selection based on the array
It occurred to me then if I'm going to use an array anyway, I might as well load all items in an array, do the "resorting" and the reload the items in the list from the array. Might be more straightforward?
Btw...It seems VB has a simple solution to moving items: listbox.list(i) = listbox.list(i+1) or something like that moves an item. Even Excel seems to have this property but not MS Access!
Can some one tell me why, on the attached database example, I can select multiple items from list boxes
"TipoCliente" and "FaixaEt" through "frmClientes" form but they are not passed forward to table "tblClientes" ?
Try to onpen attached database example and use form "fmrClientes" and select multiple items at
"TipoCliente" and "FaixaEt" list boxes by entering them with mouse click and Ctrl key pressed .
Select also single item from
"NivEns" Combobox and write anything on "Nome" and "Apelido" fields .
Go to the table "tblClientes" and you can see text fields "Nome" and "Apelido" and also the item "NivEns" from Combobox "NivEns" are all there but not the items you selected from "TipoCliente" and "FaixaEt" list boxes .
What is happenig ?
Lots of thanlks
Miguel
In appendix is .mdb file with this thema.
Inside you can find one form with listbox (with multi selecting ability).
I use this code :
Dim strSQL As String
Dim i As Variant
With Me.se1
For Each i In .ItemsSelected
SQL = "DELETE '*' FROM [t1] WHERE [id] = " & .ItemData(i) & " ;"
CurrentDb.Execute (SQL)
Next
End With
Me.se1.Requery
Result is this one :
1) If I delete only one item in list, it is ok. I can do it again and again and it is working fine.
BUT
2) If I delete more items in list at once, it is ok - but if I will try to do it again then there is an error because .ItemData(i) value is Null.
How do I remove multiple selected items from listbox.
Noticed it is a table/query listbox, not value list.
Remove selected.zip
I have a form with a combo box named 'Venue'. The combo box values comes from a Table with a list of about 200 countries. As of now a user is able to select only one country. However, I want users to be able to select more than one country.
View 1 Replies View RelatedI am currently in the process of creating a form that will allow you to enter details for an email sent, select a number of documents from a list box and then open the mail message pre-written with attachments. The attachments reside in a list box currently, and I am attempting to use a "For Each" with item selected.column(3) as the file path, as column(3) contains the filepath from the table.
Currently my code is:
Private Sub OutlookBut_Click()
Dim olApp As Object
Dim objMail As Object
Dim varItm As Variant
On Error Resume Next
Set olApp = GetObject(, "Outlook.Application")
[Code] ....
When this code runs, outlook will open as a process when it is closed, but then freeze and not allow me to see it or access it in anyway. If Outlook is opened Microsoft office usually gets angry at me and decides to throw error messages at me.
I am trying to use Microsoft's Desktop lending Library Template, I've altered it to suit me but there is one thing I can't seem to do.
On the (Asset List) their is a Action Column with Check Out in, when you click on it, it opens the Check out Form which is ok when you've only got one item to check out.
What I want to do is be able to Check out multiple items out to one contact in one foul swoop.
I have what should be a really simple database to build. In table tbl1PlanHdr is the header item. Many items in tbl2MaintItem will then be allocated to each header. MaintItems items will be allocated to more than one Header.
I want to set up a form that has the tbl1PlanHdr as the main part of the form and tbl2MaintItem as the subform. Possibly as a datasheet, or continuous form.
I need the ability to update items in the subform back to the orginal table.
I have a relationship of one to many from the tbl1PlanHdr to tbl2MaintItem using the primary key in tbl1PlanHdr.
But should this be a one to many from tbl2MaintItem to tbl1PlanHdr
The end result required is to be able to get a data dump of all the tbl1PlanHdr items with the corresponding tbl2MaintItems items.
I have a table like this below:
ProductID ProductName
1 AAA
2 BBB
3 CCC
I have a field in another table, like this:
RelatedProducts
AAA,CCC
AAA
AAA,BBB,CCC
I need a field in one of my queries that will return the related products field data like this:
RelatedProducts
1,3
1
1,2,3
Now I have a combo box "cbo_items" and a text box "txt_selectedItems", I want to populate text field with items selected from the combo box, every time i select an item it appears in text box and to be separated with comma, so text box appears like this ( item1, item2, item3), and after finishing the whole thing the result appears in lable "lbl_result" as "total items selected: 3 items".
View 1 Replies View Relatedtrying to enable database users to filter records based on column names which i have in a combobox. They enter the required value in a textbox and click the "Find" button.The code (linked to button click event) is not throwing any errors but the records are not being filtered.
View 4 Replies View RelatedI am trying to set up a listbox with an option to select multiple items (I have done this and tested it with debug.print and it seems to work). I am then building a filter statement with VBA. I want to then use a button to add this statement to the filter in a subform with (a datasheet design), and then requery it.
My code below seems to be working in part. But I am getting all the items at times. Seems to work consistenly when selecting one item only, but I can't see anything wrong with my 'OR' statements when I debug.print.
Private Sub Command176_Click()
Dim i As Integer
Dim strFilter As String
Dim blnFirst As Boolean
i = 0
If Me.List163.ItemsSelected.Count = 0 Then
[Code] .....