Pasting Data From Excel To Access
Mar 15, 2005
Hello,
I'd like an easy way for my users to be able to transfer data from Excel to Access. Basically, I'd like them to manually create a new parent record, and paste into an empty text box new child records. Then, when they clicked finish, I'd grab the info in the text box and put it in the appropriate tables. The trouble is - I have no clue how to do this. If someone could tell me how to get data pasted into a textbox into a table, I could figure the rest out. Any advice?
Thanks,
Eric
View Replies
ADVERTISEMENT
Sep 1, 2015
When I am working in the tutorial which is shown in the below link:
[URL]
when I copy from Clarksville.xlsx the employees names and try to paste into a new Access database*. It says:
Text is Too Long to be Edited
I am unsure what to do next to deal with this error. The internet says to increase the size of the cell where the text is being pasted. I am not sure how to do that.
View 3 Replies
View Related
Feb 14, 2006
Hello All,
I'm having trouble pasting a series of records of text from an excel sheet to a table in access.
The field (Instructions) in the main table gets its values from another table (Instructions) with Inst_ID(autonumber) + Text.
The (Instructions) table was constructed based on the unique values found in the pool of all records (611) in the excel sheet - 102 unique records.
The problem occurs when i paste the bulk of records (611) to the field in the main table - stating that #The text is too long to be edited"
- My Field Size for the respective field in the main table is set to "LongInteger"
- In the Instructions Table the text records are set as "Memo"
What happens is that only 529 of the 611 records are allowed to be pasted the remainder end up in the "Paste Errors" table, which i then confirm exist in the Instructions Table.
This also happens for other fields where i attempt the same approach (unique values from excel to table, then pasting of 611 records to respective field in the main table) but here i'm able to paste a mere 30, 52, ... records of the total of 611.
Reading through the forum for this subject i found that what could be done (Long Integer + Memo), I believe, has already been done.
So i was hoping someone could provide some help for this issue, or to figure out if what i'm trying to do is not possible.
It must be said that some of the Instruction's text really have a large character count but certainly less than 65,xxx (memo)
Thanks for any help provided. :)
Kind regards,
Ode.
View 1 Replies
View Related
Feb 14, 2006
Hello All,
I'm having trouble pasting a series of records of text from an excel sheet to a table in access.
The field (Instructions) in the main table gets its values from another table (Instructions) with Inst_ID(autonumber) + Text.
The (Instructions) table was constructed based on the unique values found in the pool of all records (611) in the excel sheet - 102 unique records.
The problem occurs when i paste the bulk of records (611) to the field in the main table - stating that #The text is too long to be edited"
- My Field Size for the respective field in the main table is set to "LongInteger"
- In the Instructions Table the text records are set as "Memo"
What happens is that only 529 of the 611 records are allowed to be pasted the remainder end up in the "Paste Errors" table, which i then confirm exist in the Instructions Table.
This also happens for other fields where i attempt the same approach (unique values from excel to table, then pasting of 611 records to respective field in the main table) but here i'm able to paste a mere 30, 52, ... records of the total of 611.
Reading through the forum for this subject i found that what could be done (Long Integer + Memo), I believe, has already been done.
So i was hoping someone could provide some help for this issue, or to figure out if what i'm trying to do is not possible.
It must be said that some of the Instruction's text really have a large character count but certainly less than 65,xxx (memo)
Thanks for any help provided.
Kind regards,
Ode.
View 1 Replies
View Related
Mar 27, 2014
I am copying and pasting the results of an Access query to Excel for the purposes of using that data as the source for a VLOOKUP. However, it seems that no matter what I do the cells that were pasted from Access do not correspond to the same values that are in the lookup table in Excel. For example, I want to find the value ABC from column A of the pasted Access data to find the corresponding ABC in the Excel array. It doesn't consider it a match even though both cells are formatted the same way. I've even gone so far to test it by putting a logical comparison of the specific cells in another cell and it claims they are not the same even though the values are exactly the same. The only thing that seems to work is if I manually type over the value pasted from Access with the same value that is already in the cell. Then the VLOOKUP works. However, I am not about to go typing all these values manually. That's why I used an Access query. How do I get Excel to recognize that these values indeed match?
View 2 Replies
View Related
Oct 21, 2012
how i can export the data from Access to excel using Access VBA for the specified sheet using data linkage with access database. Like we used to do it manually in excel as external data from access.Like we have some codes for linking excel file to database mentioned below;
DoCmd.TransferSpreadsheet acLink, , "region", "F:DB PracticeBook1.xlsx", False, "region"
Can we have something like this to link database table in excel file automatically.So that the excel size won't be that big and also it saves processing time.
View 5 Replies
View Related
Mar 13, 2013
I am new to access (2007), There is a datasheet in the form where we enter our time in/time out. We enter data using the form but that is one data at a time only. So I tried to paste multiple data (records) from excel into the access table. After pasting into the table, the data appears in the query, but not in the form.When I go to the form to check if the data I pasted into the table will appear in the form's datasheet...some data appears but some does not.
View 2 Replies
View Related
Feb 13, 2007
Hi, I have a table holding data with each record allocated an Autonumber data type. I accidentally deleted some of these records, although they are still present in another table. How do i paste them from this other table into my current table, allowing them to keep their original autonumbers instead of just adding them to the end?
(eg - I have records with Autonumbers 1,2,3,4,5 and after deleting 3 and 4 i have 1,2,5.
I need to paste records 3 and 4 (from other table) so as they again become 3 and 4 and not 6 and 7)
Thanks.
View 2 Replies
View Related
May 23, 2006
Hi there,
I have a spreadsheet which has a large amount of data. It is organised by database structure. I'm aware of primary keys etc but what I want to avoid is creating each field as new.
For example I would like to copy the fields from excel and paste them to create feilds in access. I'm aware that I would have to manually input any special parameters. This would save me a couple of hours.
Any help would be appreciated.
Thanks
View 3 Replies
View Related
Jul 23, 2007
Hi there, and sorry for such a stupid question..
I'm just making the change from excel to access for my business.
Most things seem straightforward but I can't seem to paste a single value into multiple records.
For instance, I have a couple of hundred records. I add a new field. The first 70 records all have the same value (5) for this field. In excel I would put 5 in the top cell, copy it, select all the other cells and hit paste. Doesn't seem to work in access, just paste a single one at a time.
Best I can come up with is to copy and paste 1. Then copy and paste those 2, then those 4 and so on. This does the job for 200 records but I' wouldn't facy it for 20,000....
Is there a simple answer or is it a VBA job?
Cheers,
Dave
View 10 Replies
View Related
Feb 20, 2005
hello all,
Is there any provision to copy and overwrite a particular portion of data from excel worksheets into Access table based on the primary key match.
I am using MS office 97.
View 1 Replies
View Related
Aug 20, 2013
Okay I have an Orders Form, which generates a SubTotal Price (ex VAT), VAT, Shipping & Freight Charge based on an IIF statment of being under a 50.00 order apply 20.00 charge. And finally a Order Total with it all added together. This works fine, however I cannot seem to find a way to post these prices in my Orders Table. When I click on Datasheet View for the form, all the details appear as they should.
View 3 Replies
View Related
Dec 21, 2004
Trying to paste hyperlinks in main table - Access allowed me to paste one - using the edit-paste hyperlink function- however now and forevermore that function is "grayed out" and I can no longer paste hyperlinks - I need to past approximately 1400 hyperlinks into a table so that the user can access secure intranet sites by clicking on the appropriate field in the form view -
If I can't get this to work...is it possible to run a macro from a command button on the form to open Internet explorer, paste stated text into the address bar (example www.) and then paste data from a field in the form into the string in the address bar, and then finally, follow up with stated text.
Example would be: Field=1234567
Macro opens explorer and pastes "www.testwebpage1234567toprovepoint.com into the address bar.
thanks...
View 4 Replies
View Related
May 13, 2014
I have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
View 2 Replies
View Related
Nov 16, 2005
I have a database that works as a sales system. From a table in the database I run a query that calculates the totals for that day.
i.e.
Date
.Dept 1
..Dep2
07/11/05
...£10
£10
What I need is:
1.You click a button
2.It copies the date and finds it in the excel spreadsheet as the sheet will already have a field called date.
3.It will then copy the Dept 1 figure and Dept 2 figure into the spreadsheet where the date matches (in a certain column)
Can this be done?
Kindest Regards
Danian
View 3 Replies
View Related
Jan 5, 2005
Hi I was wondering if there is a way to import the data stored as a excel file to ms access table. For ex:
I have a spreadsheet that has three columns:
Country city population
Each country would have multiple cities.
My Access table "cities: has a similar structure like this. Is there a procedure I can write to copy the data into the Access table from the spreadsheet without having to do it manually?
Please advise.
Thanks in advance
View 1 Replies
View Related
Jul 13, 2005
Hi all,
I am using Access 97 & Excel 97 for this problem. I have a Access query which takes the contents of three tables and exports them to Excel. However, the query has now reach 69000+ records and increases by about 1000+ records ever month. So what I need to do is create as many WORKSHEETS within a single Excel WORKBOOK as necessary to accomodate all of my Access data. I have written a piece of code which will create seperate WORKBOOKS for each 65000+ of records but then what I want to do is code the almagamation of these WORKBOOKS into 1.
In short, after the first WORKBOOK is created I use code to make that the active WORKBOOK and then I want to import into that the other WORKSHEETS in the other WORKBOOKS.
I am using the folowing DIM's:
Dim X As New Excel.Application
Dim WkBook As Excel.WorkBook
Dim WkSheet As Integer
Dim ExcelSheet As Excel.Worksheet
ExcelSheet therefore is the current WORKSHEET within the Excel spreadsheet I want to import into.
Any advice on the command to perform a transfer of WORKSHEET data between Excel WORKBOOKS?
Regards,
DALIEN51
View 1 Replies
View Related
Feb 23, 2006
Access2000 converts data to Excel2000 in the following way: I have specified a column data type as long integer with no "null" decimal place - whenever I analyse the table with Excel the mentioned column suddenly has 2 decimal places??????????
On the other hand when I convert data WITH 2 decimal places from Access to Excel those are displayed as "zero" (e.g. 9,15 --> 9,00) ?!?!
Thanks for any advise!
View 8 Replies
View Related
May 9, 2006
Hi all,
I have an access mdb file and just added a new field to one of the tables.
I also have several spreadsheets with bits of information that I would like to use to update the newly created field for each record.
Not sure what is the best way to approach this. Can I use a query that will look into the spreadsheet and copy the specified cell to the newly created field using an if statement? or
Do I need to get all data into a table and upload as a new table in Access then use query to update the records?
Please keep in mind that I do not wish to append new records, I need to update existing ones.
The above represents my thoughts on how to approach this task, I would appreciate any help.
I must also state that I am totally new to access and would appreciate as much detail as is possible in the response(s).
Thanks,
Wingale
View 1 Replies
View Related
Feb 21, 2007
I wanted to know if anyone else is having issues with getting external data into access from excell? For some reason this function is not working for me today.
Any help would be greatly appreciated.
Thanks
View 14 Replies
View Related
Nov 4, 2007
Hi,
I was wondering if i can get some help here. The aim here is moving data from excel to Access '03.
At the moment, i'm having troubled in finding out a way to open a database and execute SQL - insert the data into the table.
Set cn = New ADODB.Connection
With cn
.Provider = "Microsoft.Jet.OLEDB.4.0"
.ConnectionString = "Data Source= C:MydocumentsmyDB.mdb;Extended Properties=Excel 8.0;"
.Open
End With
then, i got stuck in here whereby i need to execute the SQL insert command to insert record to the table.
Appreciates your help greatly
Thank you in advance
View 4 Replies
View Related
Nov 27, 2007
Hi, this is proabbaly an age old problem but it still drives me mad. I have an excel spreadsheet in column format (52 columns of weekly data in 100 rows). I want to get this into a database to anaylse it. However the only way i know how is to manually convert it to a long list (this takes a long time). is there a way through access to convert column data to a list?
Thanks for helping me (if you can)
View 2 Replies
View Related
Feb 28, 2008
Hi
I've had a search through but to no avail.
I'm trying to import data from an Access query into a blank spreadsheet (Data-Import External Data etc), but it's only giving me a list of the tables in the database and not listing any of the queries. I've never had any problem with this before - I've been able to import queries fine - so I hope someone knows what's going on.
Access and Excel 2002 by the way.
View 1 Replies
View Related
Dec 22, 2005
Whats up everyone I am a fairly new user to access and I am trying to develop a database to hold quarterly data from multiple companies. What is the best approach getting the information off the companies data entry form into the database. The data entry form does change over time so I cannot reference specific cells. Can you use lookup tables in Access? Any help would be great.
Thank you all.
Mike
View 7 Replies
View Related
Aug 4, 2005
In Excel I have a sheet with about 3000 rows. Each row has an id. I need to retrieve a field from an Access database for each id in the Excel file.
I know how to query the Access database from Excel, but I don't know how to set the query to use the id's in the Excel sheet instead of an Access table.
Any help would be appreciated. Thanks.
View 1 Replies
View Related
Jan 8, 2006
Hello,
I am in the process of converting data from an excel sheet into Access 2000. I know the import procedure, however some of the fields in the Excel sheet have multiple data.
Is there a way to sort out this problem, short of cutting and pasting or re-entering the data? For example one field has the following: Mon, Jan 10,2006, 9AM to 11AM. I want to eliminate this field and create a field each for the day, date, start time and end time.
Thank you
View 4 Replies
View Related
