I have two similar forms with similar controls. I copy 20 pieces of controls to another forms certain tab.
When I run code to update database table using the control box value, access can’t find the control box. I got this errors message.
Do you guys know why I got this error?
Thanks
I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:
Private Sub CBPrintReq_Click()
On Error GoTo SendPrintError
Dim NewID As String, Notice As String, Temp
Dim CRLF As String * 3
CRLF = Chr$(10) + Chr$(13)
Notice = ""
[Code] ....
Error: Compile error: Method or data member not found when create Update button
View 7 Replies View RelatedI have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery
Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName
FROM Applications
WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName]))
ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
Hi,
Trying to run a template on a new computer.. it works on other computers, but in this case it gives me this compile error.. kind of strange.
It comes up here-
End With
Selection.PasteAndFormat (wdPasteDefault)
Selection.MoveUp Unit:=wdParagraph, Count:=1, Extend:=wdExtend
(.PasteAndFormat) gets highlighted... I'm not that computer savvy... please help!!
Thanks heaps
Ross
i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:
.NamedParameters = True
the error message is this :
method or data member not found
my code is as following:
Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean
On Error GoTo Err
DoCmd.Hourglass True
Dim rst As ADODB.Recordset
[code].....
I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"
[Code].....
Compile error: Method or data member not found
Code:
Option Compare Database
Option Explicit
Dim intItems As Integer
Dim strName() As String, datBirthDate() As Date, intAge() As Integer
Private Sub Form_Load()
intItems = Val(InputBox("How many names do you have?", "Name List"))
[Code] .....
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
MsgBox "First Value, " & Me.txt_FSNo
CurrentDb.Execute "INSERT INTO BackchargeLog (BC_FSNo, BC_FContract, BC_FPurchaseOrder, BC_FProjectArea, " & _
" BC_FTitle, BC_FDetailDescription, BC_FSupplierToBeCharged, BC_FSupToBeChargedNumber, BC_FSTBCContactName, BC_FSTBCContactNumber, " & _
" BC_FSTBCContactEmail, BC_FIncidentReportedDate, BC_FInitiatedDate, BC_FEstimateAvailable,
[Code] .....
Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:
Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work
Below is the code I have on the combo box of the main form:
Private Sub Cbo_Emp_Filter_AfterUpdate()
Dim strSQl As String
strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]
Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl
Me.SUBFORM_ABSENCE_TRACKING.Requery
End Sub
Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97
Thanks
Jim
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application")
Set appOutlook = New Outlook.Application
Set namespaceOutlook = appOutlook.GetNamespace("MAPI")
Dim folderOutlook As Folder
Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox)
FolderOutlook.Display
Hello all,
I try to delete a record and i get this error message "The search key was not found in any record". The key of the table is an autonumber but for some reason in these two records i want to delete has value = 0 .
Any suggestion how to delete these two records?
Thank you in advance!
I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.
My question is:
Is it possible to have an error message box appear when i click submit and no data is returned by the search query?
I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"
Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).
I need to add a DLookup to my Subreport.
For my text box, Text255, on the Subreport I have tried:
Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
I am using a query to search for records and I'd like there to be a message box that pops up on the search page if there are no records found (so the query is empty).
I'm guessing there is a simple solution since I think I just need an "If" statement checking to see if a field in the query is null or not. However, I'm not familiar with Access code and what I've tried so far does not work. Any help is greatly appreciated!
p.s. I am using Microsoft Access 1997...old school...
I have a macro in the On No Data event of a report that displays a message when the item number a user requests does not exist in the table being queried.
Now I need to get the same functionality in a form. The form is based on a parameter query with only one criteria [Please enter item number]. The form opens in Edit mode when a valid item number is entered.
I see that there is no On No Data event for either forms or queries, so I'm stumped on how to proceed.
Any and all assistance is appreciated.
Dear All:
I am using a combobox to search for students by their STUDENT_ID.
I wish to display a message "STUDENT NOT IN DATABASE" if the ID number is not in the database when it is typed in.
Here is the code I am using:
Private Sub Combo801_AfterUpdate()
' Find the record that matches the control.
Dim rs as object
Set rs = Me.Recordset.Clone
rs.FindFirst "[STUDENT_ID] = & Str(Nz(Me![Combo801], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark
End Sub
Any ideas where to place this message?
Many thanks,
Dion
I have got a No record found for some forms as the code below,
Private Sub Form_Load()
If Me.Recordset.RecordCount = 0 Then
DoCmd.Close
MsgBox "* No Registration Found *"
End If
End Sub
When a paramter search is done and no results found it shows up a message saying "No Registration Found" is is possible to bring up the same type of message in a report format?
I'm currently creating a student database where the user where be prompted to enter a students name and then a report is generated with the information retrieved. Everything works as it should but i would like to add a message box that comes up if the data entered by the user is not found in the database. Something like 'No student found, please retry'
View 5 Replies View Relatedi have these code to auto generate member number but the highlighted line generate error 94 - invalid use of NULL:
Private Sub cmdGetNumb_Click()
'On click of button a new Member Number is generated and
'focus is moved to tFName field.
Me![nMembNum] = NewMembNum()
Me![tFName].SetFocus
'Prevent accidental click
Me![cmdGetNumb].Enabled = False
[Code] ....
I am not sure where to start or go about creating message box that would display "No results found" if my queries return no results. My search of the forums hasn't been fruitful.
I have created one form that has a text box and a button that works as a search function to run through the tables and displays the applicable queries. Currently, if no results are returned nothing happens. Preferably I would like a message box to display stating that there were "No results found". I would assume that the code would be associated with the "Find" button. Here is the VBA code as it stands, again, I haven't even attempted to add code for a message box.
Private Sub Find_Click()
On Error GoTo Find_Click_Err
If DCount("Heading", "Service Desk Manual Query") > 0 Then
DoCmd.OpenQuery "Service Desk Manual Query", acViewNormal, acReadOnly
End If
[Code] .....
Find_Click_Exit:
Exit Sub
Find_Click_Err:
MsgBox Error$
Resume Find_Click_Exit
How to create a message when no records are found from a form to a query in the report.
Example; Donations From Great Britain have no records
I ran into this error message with the SendObject method. I'm getting the email address from the "username" environment variable. Our company generally uses the logon ID as the first part of everyone's email address, but there are some users that get this error: "Unknown message recipient; the message was not sent" Not only that, if two sendobjects are used one after the other, sometimes it sends to the first person and then the second one is set up to send a copy back to the sending user, it doesn't recognize the recipient that's logged on and is actually trying to send the email. That's the one that comes from the environment variable. But I've tried hard-coding the recipient and bypassing the variable altogether and it still generates the same error.
View 4 Replies View RelatedHi!
I'm in the midst of a database where a subform 'producttotal' textbox 'txttotal' would be automatically filled with a value from the mainform combobox 'product'. my code is
Private Sub Level_AfterUpdate()
Forms!sbfproducttotal![txttotal] = Me![product].Column(1)
End Sub
However, on testing it, I get a runtime error 2450. MS Access can't find the 'sbfproducttotal' referred to.
Do you have any idea what the problem is? Any words of advice would be welcome. Thanks!
I was doing a compact and repair when I got this error message.
Now when I try to open my database all I get is this message:
"Module not found"
:eek:
Am I screwed or is there maybe possible silver bullet??
Thanks for any help
I have been using the below code for several months to export to excel. Lately I get a run-time error 53 - File not Found. I have not changed anything, so what could be causing this issue. The debugger stops on the line "FileCopy sTemplate, sOutput"
Public Function ExportRequest() As String
On Error GoTo err_Handler
Dim dbs As Database
Dim qdf As QueryDef
Dim frm As Form
' Set database variable to current database.
Set dbs = CurrentDb()
Set frm = Forms!AOSummaryReportForm
' Open QueryDef object.
Set qdf = dbs.QueryDefs("AOSummary")
' Set parameters for query based on values entered
' in AOSummaryReportForm.
qdf.Parameters(0) = Forms!AOSummaryReportForm!StartDate
qdf.Parameters(1) = Forms!AOSummaryReportForm!EndDate
' Excel object variables
Dim appExcel As Excel.Application
Dim wbk As Excel.Workbook
Dim wks As Excel.Worksheet
Dim sTemplate As String
Dim sTempFile As String
Dim sOutput As String
Dim rst As DAO.Recordset
Dim strSQL As String
Dim lRecords As Long
Dim iRow As Integer
Dim iCol As Integer
Dim iFld As Integer
Const cTabOne As Byte = 1
Const cStartRow As Byte = 2
Const cStartColumn As Byte = 1
DoCmd.Hourglass True
' set to break on all errors.....