I am trying to develop a service dispatch DB and would like to have a print workorder control button. I have it working OK until I enter subsequent records into the subform. OR..am I better off creating a report for the specified workorder? IF so, how? Any direction would be appreciated.
View RepliesHello everyone! I'm trying to print a single label to a Zebra printer, but I have ran into a small problem. I'm using a checkbox to select the records and a query to catch the record I want printed as a label. I print the label and deselect the record I printed and all works fine. I print the next record and the previous record prints on top the current record. If I turn off the printer in between printing labels all works fine. Any help would be a great because I going to wear out the on/off button on my printer
View 3 Replies View RelatedHow to do this? trick is that these reports are all the same report being fed different data, opened and closed using VBA. In between the closing and opening the data gets changed. Best approach is?
CutePDF is installed
I've been trying to get my head round this one , but i'm just to thick to get it.
I have a continuous form that lists all items at a certain location.
The user selects a record by clicking on the record selector and then clicks on a command button with this code:
stDocName = "DivingInspectionCert"
stLinkCriteria = ("EquipmentID = " & Me!EquipmentID)
DoCmd.OpenForm stDocName, , , stLinkCriteria
The user then enters inspection details in to the "DivingInspectionCert" form which i want to store in a table (DivingCert) which will relate to the item. On completion of this form the user then clicks on a command button with this code:
DoCmd.RunCommand acCmdSaveRecord
If Me.RecordsetClone.RecordCount = 0 Then
MsgBox "There are no items to Print", vbInformation, "EquiTrac"
End
Else
DoCmd.OpenReport "DivingInspectionRpt", , , ("EquipmentID = " & Me!EquipmentID)
DoCmd.Close
When i click on this button, the report doesn't print and i get a message "No current record".
The inspection details are not stored in the table.
I did have the forms RecordSource based on the table "DivingCert" but that didn't work and i have just tried a query but it is still not working.
Would be much appreciated if you can help me.
Thank you
All i want to do is to print my report (with the records ideally!) which has a subreport header at the top but all i am getting is a single blank record?!
Surely this is not too much to ask but it is holding up the whole project!!!
What is the best way to impliment a query in a form so that the user can view the query records, and have the option to print or save the selected record using command buttons?
I tried subforms but I could not get the command buttons to work in the subform after it went into the form, it wanted to print the entire form instead of the selected record from the subform.
So in a nutshell I have 3-4 queries that are built, and I want to have them show up on my form in a format that the user can scroll through the results and select a single record of the results and then print or save that individual record from the form, if such a thing is possible.
Thanks in advance
Todd
Could anyone give some assist on how to print only the subform in a form. I'm looking to create a print preview command button that will allow only the sub form to be printed... Thanks for the assist.....
View 6 Replies View RelatedI have my subform on my main form and when I press the print button that I created it prints the main form 200 times due to the amout of records in the table.
When I open the subform by its self then press the print button that I created it will print what I want, the subform only.
Please help!! I want to print this subform from the main form.
Thanks,
Need to know if there is a way to exclude a subform from printing when I print forms?
Here's what I'm trying to do - Have a form that contains multiple subforms that are linked back to the master form. One of these subforms is a memo which they would like to see on the "preliminary or draft" copy of this form but would like to exclude it from the "final" copy.
I would think there is some why to do it but I'm stumped at the moment.
Any ideas would be greatly appreciated.
Thanks,
I have a database that has a form with 3 subforms. Once a user has entered date, there is a command button to print the current record. The problem is, the 3 subforms have a very thick black boarder around them. Is there anyway to remove the thick boarder? Any help would be appreciated.
View 1 Replies View RelatedWhile using a relational database in Access 2003, I am writing a letter to people, reminding them what resources they have been allocated. The short letter is in a form and a subform has been used to list the resources - between 1 and 5 lines.
If I isolate one person by filtering, I get x identical pages, where x = the number of resources that have been allocated to them. Therefore, some people get one page, others could get 5 identical pages.
Can anyone advise how I can just show and print one page per person, irrespective of the number of resources allocated to them? I can get the correct result in a report but need it in a form so that the users can edit and select the letters to be printed easily.
Many thanks.
Hello,
I have done a search on this forum and found all the postings relating to printing only the current record for a report. I have a command button and have followed what these posts say. The report prints the current record but leaves out the data from the subform.
The database is a recipe organizer. The main form is called Recipes and the subform contains the ingredients for each recipe. This subform is called Ingredients.
I set up a command button with the following code:
Private Sub Print_Recipe_Click()
On Error GoTo Err_Print_Recipe_Click
Dim stDocName As String
stDocName = "Family Recipes"
DoCmd.OpenReport stDocName, acNormal, , "[RecipeID] = " & Forms!RECIPES![RecipeID]
Exit_Print_Recipe_Click:
Exit Sub
Err_Print_Recipe_Click:
MsgBox Err.Description
Resume Exit_Print_Recipe_Click
End Sub
Since the RecipeID is used in both forms and the report, I thought it would be the best field to use since it linked all the information together.
So what do I need to do so that the subform data prints out on the report?
Thanks
GeekyGirl
I have a subform that displays results based on selections from cascading boxes on the form. I am trying to print them to a report. I think my procedure is correct for the print button and Im afraid my problem is that the form is not based on a seperate query. Is that they only way to be able to print? It is based on procedures defined in the cascading boxes. How can correct it so it will print the results to a report? Thanx.
View 2 Replies View RelatedHi there,
I am trying to save my form that i have created as a report by right clicking on the form and choosing save as report. However, my form includes a subform but the subform does not show up in the report. Any ideas as to why this and how it can be shown????
Thanks in advance
Lucy
I currently am trying to print the current record that I have selected on my form and the subform that I have on the same page. If I try to print selected record it will only print out the main form correctly and will print out the first record on the sub form. I have tried to make a reprot of the current form and it only will do the main form and nothing from the sub form. I am willing to try whatever method would work in getting this to work. Thanks
View 2 Replies View RelatedI have an Access 2000 form containing several subforms that needs printing on a regular basis, which works fine when the subform contains data, but sometimes the subforms contain null values. We want to print the subforms without the data to maintain consistency, but when printed they have disappeared and a blank space in the form is printed. The subforms view perfectly in print preview... any help would be appreciated, I have spent a good deal of time researching this issue without any leads
View 2 Replies View RelatedI'm using access 2003
I've successfully printed a report from a main form control and now I'm trying to do the same with a subform control.
I'm using a query to filter the report, with the criteria of:
Code: [forms]![MainForm]![Subform].[form]![textbox]
Is there something I'm missing?
I have a subform with two fields whose record source is a Query ("subquery")
Code in the query is as follows:
"SELECT Sum(capital) AS cq1
FROM capital_act WHERE (((capital_act.month)='jan' Or (capital_act.month)='feb' Or (capital_act.month)='mar') And ((capital_act.projectid)=forms!frmplan!projectid)) ;"
This query updates the field cq1 in my subform. I want to add 3 other fields for the 2nd, 3rd and 4th quarters. For instance the second quarter field cq2 field would have the capital_act.month as 'apr' or 'may' or 'jun' and so on...
cq1 value gets updated fine. I dont know how to add the fields cq2, cq3, and cq4 on the same subform whose record source would be the same query ("subquery").
I added a second SQL statement in the same query ("subquery") for cq2 but access does not let me add it.
Can somone point me in the right direction please?
Thanks.
I am facing some problem regarding sub form row.When i want to disable single filed then it disable all rows field. i will be able to disable single field in sub form.
View 3 Replies View RelatedIs it possable to create a sub form using a single table. I can create one using 2 tables but am not sure on how to or if it can be done using 1 table. All i can find in forum is about multiple tables.
View 2 Replies View RelatedSo I'm making a database for an office and I'm having a little trouble getting the information linked together. This is my first access project.
Here's the information:
Desktops_TBL
Desktop ID (PK)
Location (FK)
Serial Number
Product Number
Operating System
etc
[Code]....
How I want it to work:
-New users or equipment is entered via a new entry form and stored in the respective table with a dummy Location (i.e. "Backstock"). This part I understand how to do
-To assign a user and equipment to a location, I want there to be a master form for that location. In that master form, there are subforms displaying the current pieces of equipment attributed (if there are any) to that location. A combo box displays the possible choices, and choosing a choice attributes the equipment to that location.
I have the form with subforms set up. The number of records corresponds to the number of locations in the office. Going through the records displays the correct information of attributed equipment in the subforms.
Where I am stuck: What I want is for the user of the database to be able to click on the Desktop serial number combo box, choose a different record, and have it assign the Location from the main form to the Desktop Location FK so that they link. When I try to do this, it writes a new blank record in Desttop_TBL, assigning the Desktop ID to the PC Serial Number spot, but that's it.
I have a Project form, which holds StockArtProduction_Subform in datasheet view. I need for them to be able to click on the ID in the StockArtProduction_Subform datasheet and it open a single view form (StockArtProduction) with the correlating ID.
Ideally, it would also work for new entries in the StockArtProduction_Subform, but the StockArtProduction form would have to "auto populate" (did I use it right?) with the ID of the currently open Project form.
I was having trouble just setting each report with a particular print method - for some reason they just kept forgetting their individual settings and resorting to default on the machine.
This meant reports were printing on the wrong paper, or the wrong size paper, the wrong orientation and some times refusing to print if it couldn't find the paper (which is useful in runtime as it doesn't display error messages)
So I used Reports(rpt).printer properties (I forgot where I found this) to hard code the printer properties into each print command... this meant I had to use another function to insert the variables.
So all I had to do was say:
Code:
PrintMe("Invoice","InvoiceID",iID)
and a report would print to exactly how I wanted... but it's just too slow!
See attached for full code, I have a niggling feeling it may be the function: PrinterOK, to make sure the printer exists or not.
Code:
Function PrinterOK(sPrinterName As String) As Boolean
Dim MyPrinter As Printer
PrinterOK = False
For Each MyPrinter In Printers
If MyPrinter.DeviceName = sPrinterName Then
PrinterOK = True
Exit Function
End If
Next
End Function
I know it's the printing code, because if I stop the printing and just preview then it shows up almost instantly.
Any Single line of code available?
View 2 Replies View RelatedI am trying to create a form with a button attached to each record that would allow the user to click the button and it would automatically open outlook and fill in the TO:, SUBJECT: and BODY: fields. Here is the code that I currently have:
Code:
Private Sub Command33_Click()
Dim strEmail As String
Dim strMsg As String
Dim oLook As Object
Dim oMail As Object
Set oLook = CreateObject("Outlook.Application")
Set oMail = oLook.CreateItem(0)
[code]...
There are two issues I keep running into:
1. This code opens outlook and populates all of the fields but pastes the email incorrectly. Instead of pasting just the email (email@email.com) it pastes the html tags as well (email@email.com#mailto:email@email.com#) which means that the user would have to delete everything between the #'s in order to send the email every time.
2. I currently have the email BODY pulling from a table but this obviously limits what I can do. I would like to simply encode the BODY within the VBA code. The setup I am looking for is:
one paragraph
a blank line
a hyperlink to a website
a blank line
another paragraph
Hi, thanks in advance for any help you can offer. I've got a table that has
Date
Time
Tag ID
Power Level
throughout the day a computer listens to several tags (transmitters) and records the power level of the signal generated by the tag each 3 seconds. What I'd like to do is build a query that gives the Date, Time and Maximum Power level reading for each tag ID. I only want 1 record per tag per day
I've tried using "group by" and max in the query but this gives me all the times throughout the day.
anyway, thanks again for looking
cheers, Shaun