I found instructions that said in order to prefix an autonumber i.e. AAA000 you would have to write "AAA"000 in the format section under the general tab in the table design view of the field you are interested in.
I did this however even though the number now appears as AAA000, AAA001 etc in the table it does appear this way in the form - it just appears as 0,1 etc....
My actual prefix is 2006/1010/ i.e. 2006/1010/001, 2006/1010/002 and so forth.
I searched the forum before posting and couldn't find my problem, or how to adapt similar problems.
I have created a Database for call logging.
I have 2 types of call Change and Problem. I have 2 seperate tables for these. Each have an Auto Number as a primary key. One Prefixed with a 'C' and one with a 'P'. This was all fine, problem now being i have created a new table for Time Management.
I am trying to link the the time to a call, i can link the 2 primary keys to the 'reference' field in the time management, the problem being there are now 2, 000001, i can manually re-attach the P or C, but i want to write a report to see who's logging the most calls, to do this i wanted to use the time to look accross to Problem or Change and show the User ID, but when i query C000001, it show's no matchs as all thats stored in the table is 000001.
So I have a table with a bunch of data, InventoryID is the autonumber field which just increments normally, what I want to do is stick 'S000' in front of the autonumber, and for this to be the default prefix for any new items in my database - how would I go about this? I'm guessing some kind of append or update query would do it, but I'm no access whiz, help appreciated folks.........
Ok...I've looked at old threads and now I'm more confused than before. I'm trying to find a way to make my field "PCRTrackingNumber", work like this: 05-0001...05-0002...05-0003...and so on. The 05 represents the year. I currently have the field setup as autonumber, set to Long Integer and increment. Even if it looked like 05-1...05-2...05-3...etc. that would be fine. Basically just looking for a way to add "05-" to the prefix. I was trying to think of a way to combine a field to the autonumber field and use that instead...but need some help. Thanks, Jeff
I have a module which generates an autonumber based on a table content (Tbl:Numbervalues) and a prefix (prefix held in Tbl: TextValues)
the module itself works fine and after every getprefix & getnextnumber it updates the number within numbervalues table to the next unique figure.
However what i want it to do is within my database i want to loop through all the records and update a column based on the getprefix() & getnextnumber()
so at the moment lets say column A has values of SHA000001 (in all 100 records) i want it to loop through those 100 records and update to be SHA(from the prefix table) and 000001 all the way to 000100.
Code: Public Function GetPrefix() As String On Error GoTo GetPrefix_ErrorHandler GetPrefix = DLookup("Value", "TextValues", "Description = ""InvoicePrefix""") If Len(GetPrefix) <> 2 Then msgbox "The Invoice Prefix Value in the Text Values Table is not 2 characters long!", vbCritical, "Critical Warning" End If
i have a table of listed documents that when a user enters the data i want the location field to have a prefix before they enter the data so that the tabel field will show the prefix + the data entered
I have been looking at the way I name fields and thought I'd Google the topic. Seems to be a split as to prefix names or not. Looks like the SQL Sever and Oracle groups say not to while Access users are kind of directed to use them...
While I have not prefixed names in the past, I was going to do my next db with the things like:
intMyFldName strMyFldName etc...
Where as in the past I would do something like:
my_fld_name_one my_fld_name_two etc...
What do you all see as some of the pro's and con's?
I have a database with a field called "Drawing Number". I can set it up so that the prefix "STD." always appears and then I type in the relevant number. BUT I cannot figure out how to set up autonumber so that the "STD." appears and then the auto number is added????
Can anyone tell me what the 'ac' part of a method, such as 'acReport', actually means. I am guseeing it may be something like Active Command or similar.
There is no other reason that curiosity for me wanting to know this...or is there??
I have two tables linked to each other in one to many relationship. Instead of auto number, the date and shift (Text) is being used as the primary keys (Composite Primary Key). Here is the tables structures,
The tables Payouts and Bills has one to many relationship. One payout row can have many bills. The problem is that I want to start the Autonumber in bills table everyday from 1. As date and shift are different for every day so even if i start bills from 1 everyday, it wont make same primary key. I can do it manually but I want to make it automatically.
Getting better - but still far from being competent with VB can someone please help me with the following code.
On the On Click event of a command button I want to call up a field (from another table/form) and add A to it so it lands in a text box. So using the following example -
The table/form is called Patient and the field in question is URNumber. The form I want to put the command button is called RelatedDetails, and in a text box (IDNo) I want to put code that creatsed URNumber with an A on the end (or the beginning) Any ideas?
I could not use 'Auto Numbering' for each line, as I need out some lines accumulated for one invoice number 'ICP001'.
My questions:
1. What can I do to let me Automatic generate invoice number which increment from last number? 2. What can I do to let me easy to put those 'invoice number' into my Data Entry table's invoice number field? (p/s: Append Query? Update Query?) 3. What if I need sorting (example to group ONE customer and ONE Particular) for my invoicing number? What I meant is ... let say there is 30 lines customer CUC with particular Part B in a same month, and I wanna get them into same invoice number.
My database has three tables with many columns. The three tables are identical in the names of their columns.
I want to copy all columns from all three tables together into one single table, giving the respective columns prefix table1-, table2-, table3- since the columns would otherwise be indistinguishable.
I already tried to search the board for "table columns add prefix".
I use Access 2010
I managed to copy all columns together into one table through design-view, but cannot figure out the "add prefix" step.
How to add a prefix to an existing description in a project table, generated from the project number. Here's a sample of my data:
PROJECT NUMBER DESCRIPTION 01200000 Completed Projects 01601530 Steele Sub
I would like the Descriptions to read: 01200000 MO-20 Completed Projects 01601530 MO-60 Steele Sub
The state, "MO," comes from the first two digits "01" and the coop, "60," comes from the second two digits. I have a table of a thousand or so projects in an Access database that I need to amend the descriptions of to include these prefixes. Is there a simple way to do this in Access or in Excel without writing code?
I have a table which will contain project information, and want the ID field, which auto assigns a unique number to each record, to be formatted like this P12-001, where 12 = the last two digits of the year the record was created. I know that if I type into the format field "P"00"-"000 i get the ID number in the format I want, but cannot figure how to get the first two zeros, to be the date format.
Further, I would like the ID numbers to restart from 1 each year, so this year this first project, P12-001 and may run through to P12-063, then the first project I enter next year to start P13-001.
I have a question. I would like to be able to have an autonumber in the main form be applied to text boxes on the subform. So If I enter a name in the main form, an autonumber is generated, then that number is automatically entered into the boxes in my subform. My subform is a datasheet view with many records. I want all the records to have the autonumber generated in the main form. Is there a way to do this. Currently I have the boxes in the subform retrieve the autonumber by setting it equal to the autonumber text box on the main form. I would think that there would be an easier way to accomplish this seemingly simple task.
hello, I am using SQL INSERT INTO where I insert values from my form Me!value1 etc I have an autonumber in the table where I am using INSERT INTO, and when I exclude the autonumber it says that the number of columns does not match. I tried assigning a number manually in SQL and it works fine, but I can't use autonumber anymore. Is there a way to use autonumber and still do INSERT INTO or is there a way I can find the highest number and put the next highest in there through VBA?
How do I assign an autonumber to a table after the table is created. I know it ask after you create a table, but I answered no. Now I want it to assign each record an autonumber?
Is there any way you could renumber the autonumber, I have deleted some records in my table and the numbering orders have a gap and I would like the numbers to rearange automatically as the record or records are deleted.
I have a problem which I couldn't solve. I have two tables. There're relationships is one to many (1:N). The first one is Order and the other one is OrderItems. Order(order_ID,...) and OrderItems(order_ID, lineitem,...). The compound key of the relation OrderItems is order_ID and lineitem). What I exactly want? I want for every new Order_ID to have restarting count of lineitem.
