Hi,
Is there anyway i can print the current record using a button or something ,which i am viewing using Data Access Pages , i have searched a lot of forums but have got nowhere , now i just wanna know how the hell can i use it to print a record or print any report for that matter using a DAP!!! can anyone give me a suggestion or just point me to some reference for using these DAP...
thankx,
solig
I have a report that is tied to a table. On my table form I have a button that prints the report. Is there a way to only print the report for the current record showing on my form?
View 1 Replies View RelatedI'm having hard trouble doing print preview current record from form with subform to a report.
When using the code below I'm getting an error for:
The specified field [PolicyNum] could refer to more than 1 table listed in the from clause of your sql statement.
Dim strDocName As String
Dim strLinkCriteria As String
strDocName = "rptCurrentInfo"
strLinkCriteria = "[PolicyNum] = Forms![frmAdjusterMod]![PolicyNum]"
DoCmd.OpenReport strDocName, acViewPreview, , strLinkCriteria
Command button is in the main form frmadjustermod - sbfm is sbfmMoreMod
foreign key is PolicyNum
Thanks,
Michael
Private Sub Command30_Click()
DoCmd.RunCommand acCmdSaveRecord
Dim strDocName As String
Dim strWhere As String
strDocName = "Civil Process"
strWhere = "[FormID]=" & Me!FormID
DoCmd.OpenReport strDocName, acPreview, , strWhere
DoCmd.RunCommand acCmdPrint
End Sub
I can get this code to print only one record but then the button will always print this record. It will not change and print the current record.
FormID is an autonumber to give each record it own id.
I put a button on a form for printing the object but it prints every record. How can I print the object with the current record?
View 3 Replies View RelatedIs there a way to print the current record from a dao.recordset?
This is an exercise to compare data content.
I have a table with 30 fields and thousands of rows (rs1).
I'm comparing it with a copy of the same table (rs2) that has the same number of fields and the same rows and almost the same content.
I can loop through the recordsets and get the cursor to stop on a field whose values don't match, lets say on row #x
and the programmed message will say something like:
"ROW: 699 Field: [RequestStatus] rs1.VALUE: Closed, DOES NOT MATCH rs2.Value: VOID, in the comparison recordset"Then I'd like to print the entire Row, Row #699.
I thought I could use rs1.getrows but I'm not sure how to make that work.
Report says 'No Current Record' when viewing with print preview, even though it works fine in report view?What did I do?
View 10 Replies View RelatedI need to Print a single record from a form but using a report layout.
I have created the form and created a report. A button on the Form kciks off the print but I get all records rather than just the one shown on the Form. Whats a really simple way of just selecting the Current record.
Where do I put an instruction saying print only this record:confused:
hi
i have 3 queries brought together in 1 form. i do not want a report to be printed out just the current record in form view. this is because i have a number of images per record.
if i print out the current record and it only has 1 photo in a sub-form attached to the main form record, then the main form will print on 1 page which is what i want [screenshot 1]. But if there are 2 or more photos attached to the main record then the print command button prints out 2 pages for 2 photos, 3 pages for 3 photos and so on [screenshot 2].
any ideas as to how to limit the print command button to print out only 1 page per record regardless of how many photos their are attached to each record??
thanks
I tried to follow the Allen Brown print the current record in the form and its not coming up. I can print all of the records but not the current.
View 3 Replies View RelatedI have a form that has 2 subforms. When I try to print the current file there are a few problems,
1) When you use the print option in File menu, and select "Selected Records" , it will always print the second record, no the one selected.
2) No matter how often I change the printer properties , it will not keep the paper size I request.
Is there a script I could use to set the size and print the current record ?
I have a DB in Access 2007 which I'm having trouble with. I have a form, "Sub_Det_Frm", on which I would like to place a button to print the current record, (Primary Key is an autonumber "Employee Number") to a report "Sub_DetForm_Rpt".
I've used the instructions from, oops I can't show you the link! It's h(double t)p(colon)//allenbrowne(dot)com/casu-15(dot)html but I'm getting this error:
The expression On Click you entered as the property setting produced the following error: A problem occurred while Employee Details was communicating with the OLE server or ActiveX Control.
This error occurs when an event has failed to run because Microsoft Office Access cannot evaluate the location of the logic for the event. For example, if the OnOpen property of a form is set to =[Field], this error occurs because Access expects a macro or event name to run when the event is fired.
I want to put a print button on my data entry form that prints the current record in a report that is laid out all nice and pretty. I found this code that works, but it goes straight to the printer - it does not bring up the printer dialog so you can select a printer.
Code:
Private Sub RecordPrint_Click()
Dim strWhere As String
If Me.Dirty Then
Me.Dirty = False
End If
[Code] ....
How do I get it to bring up the printer dialog?
I have a button on a FORM to print the current record with the following code:
DoCmd.RunCommand acCmdSelectRecord
DoCmd.PrintOut acSelection
But what I need is that before printing, open the preview to set the margins and page size ... or at least to pre-configure so that when you press the button, and comes preformatted.
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code:
Private Sub cmdPrintRecord_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
Code:
varAge = DateDiff("yyyy", varBirthDate, Now)
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I have a control on a form where a user inputs a number then presses enter. The AfterUpdate event prints a report. The problem is that it prints the previous record each time its updated. I want to print the current record. Maybe some type of requery before the event happens. Any ideas?
View 1 Replies View RelatedI have a form titled "Search by Contract # - Active". I tried adding a command button to print the current form. I created a report called "Active Contract" ro carry out this function. To open the form the user must enter a contract number to view the record. This is what I want the form to do. However, when I try to print the record from my command I'm getting an error. why it won't pull up the report?
View 1 Replies View RelatedI want to have Access run a query, open a report, and print the report based on the ID number of the form that I have open. Is this possible?
The situation would be, I have a form that uses the the primary key as a record number. After I enter the data into the form, with the form open I want to add a button to open and print a report of the current record number.
Hi All,
I am looking for some help with a project I am working on where I need to automatically print a report from my database every time a new record is added to the table. The table contains 13 fields and the report needs to display 12 of them, the other being the index which is set to Autonumber.
The table is being updated solely by ODBC, this is working OK.
There is the potential for records to be added to the table very quickly via the ODBC link, so I need to safeguard that the report is being populated with correct information from the record that triggered the print event. Also, should multiple records be added in close succession, a report needs to be correctly generated/printed for each of one. The DB is to have no user intervention, and will just run on the PC at startup with all access menus/controls locked out.
Any information on how you think I should structure this, or any examples of helpful code that you might have would be very much appreciated.
Thanks in advance, :)
Jon.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedI need a way to dynamically store a particular value in "field_2" of the CURRENT record depending on whether or not the value of "field_1" of the CURRENT record is identical to the value of "field_1" of the PREVIOUS record within the same table. The table is sorted on "field_1".
So, if the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is also "ABC", then store a value of "PPP" in "field_2" of the current record. IF on the other hand, the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is "XYZ", then store a value of "WWW" in "field_2" of the current record.
I have a report that will use these results to count only the number of records that have a "WWW" in "field_2".
Is this doable, maybe in a query somehow?
I should add that whatever the solution, it needs to be compatible with Access 2000.
I have two forms both with separate tables
(1) Register and
(2) Payments.
One of the common denominators between them is the URN which is auto-populated as it is an auto number field. My issue is that when I want to add a new record to the payments table using the forms (I can get to the payments form via the register form), I want to be able to identify the record that I am currently viewing within the register and auto populate the URN field with the same number. This is what I have done so far,
Option Compare Database
Option Explicit
Private Sub AttachPaymentDetails()
Call PerformInsert("tblFinancialBudget", "frmFinancialBudget")
End Sub
[code]....
I'm trying to make a form that shows what the last record was next to the empty space where you enter a new record.
This is so the user knows that what they are entering is roughly in line with what has come before.
So for example if I was recording temperature every May, I would like a form that has a field called temperature and next to that field I would like to see last year's temperature.
Records:
Date | Temp
2014 | 20.5
2013 | 18.5
2012 | 19.0
2011 | 22.7
2010 | 15.2
So when I enter the record for 2015 I have a box that says: Temp and next to that box is "Last year was 20.5" or something like that.
I'm struggling with a query to evaluate current and prior record data. I have a query producing 5000 records. I need to group records by Case ID and compare current date record to previous date record to determine if a team and worker name has changed during the year. I need to count how many times a cases is transferred to and out of a particular team from the beggining of the year. i.e., On 1/1/2014-Team1 has an inventory of 500 cases.
During the month 25 cases are transferred into Team1 and 15 cases are transferred out of Team1. So on 2/1/2014 Team1 begins with an inventory of 510 cases. Throughout the year cases come and go from and to Team1 each month so need to figure out how to create a query to count each change. See attachment displaying how the data is listed and how I invision it to work with the In/out column counts.
Specifically, at the begginig of the year (1/1/14) for case ID 1003 you can see it belongs to Mary in Team1 for January and February. Then in March the case is transferred out and went to Joe in Team 3. So for Mary a "-1" is recorded as a negative count for that Case ID. If later in the year the case is transferred back to Mary a "+1" would be recorded. Respectively evaluated for each of the 5000 records to get a total count for each of the teams by Case ID throughout the year.
I've started with DLookup, tried comparing current month to previous month using DMax. It works as long as I only select one case ID used in a separate query but if I use the whole subset (5000 records) it fails. I can't figure out how to group each set of case IDs and then apply the query.
My attempted query: DLookUp("[Team]","[Team_qry]","[Team_qry]![Date]=#" & CStr(DMax("[Date]","[Team_qry]","[Team_qry]![Date] <#" & CStr([Date]) & "#")) & "#")
In my query, i want to automatically display the value of another field from the previous record in a field in my current record. i.e.
Name Value Previous
Record 1 1
Record 2 2 1
Record 3 7 2
Record 4 1 7
Is it possible to create some kind of simple expression to refer to data in another record?
Cheers,
Ben