Printer Object Error Need Some Help.thx
Sep 9, 2006
Hello, i develope with ACCESS2003, i used the printer object : dim xxxx as printer, it works fine but when i install my program on my client PC which doesn't have ACCESS2003 but only ACCESS RUNTIME2003 i have an error (error c++ ... run-time terminates abnormaly), this PC have ACCESS2000 and when i run my base through ACCESS2000 to debug it i have an error (undefined object) on the dim instruction. I was thinking all aplication developed with A2003 was running with run-time2003, apparently no, is something missing ?
Thanks in advance for any help.
VINCENT
View Replies
ADVERTISEMENT
Jun 14, 2005
I have recently changed computers from a WindowsNT to and XP. When using the NT machine, I am able to print my Access report. However, when I hook up the XP machine and request a report from one specific database, I get the following message....this message also comes up if I try to open print preview or page setup.
"There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable."
I don't think it is a printer error as the error is occurring in this one database. I have successfully printed a test page and can open up other Access databases and print. I also tried converting the database to the 2002 format....but that did not make a difference either. There must be a setting in the database that is causing the error.....
Does anyone have any suggestions???
View 5 Replies
View Related
Oct 1, 2004
I am creating an form in a database and whenever one of my procedure's run it creates this error message:
The expression ON Load you entered as the event property setting produced the following error:
Member already exists in an object module from which this object module derives.
*The expression may not result in the name of a macro, the name of a user-defined function, or [event Procedure].
*There may have been an error evaluating the function, event, or macro.
An ideas?
View 7 Replies
View Related
Nov 8, 2005
I was wondering if anyone can help with this code. I am sure it is something simple. It works fine until the last line the (x1down) line. I am not sure what I am missing there. I got that code by recording a macro in excel. It simulates the shift/end/down keystroke which will select all fields that are in the same condition (blank or containing data) as the cell you start at.
The error I get is runtime error '424' - object required
Anyway...hope you can help. Thanks.
Dim opensheet As Object
Set opensheet = GetObject("\Netstore rainingdocsRobDataopen.xls")
With opensheet
.Application.Visible = True
.Parent.Windows(1).Visible = True
.Application.sheets("sheet1").Select
.Application.range("g2").Select
.Application.activecell.NumberFormat = "0"
.Application.activecell = 1
.Application.activecell.Copy
.Application.range("A2").Select
.Application.range(Selection, Selection.End(xlDown)).Select
View 2 Replies
View Related
Mar 7, 2006
I am Embedding OLE objects (PDF files) into a table and am having errors that state
"A problem occoured while Microsoft Office Access was communicating with the OLE server or ActiveX Control."
From what I can see there is not a problem with The OLE server, so the only thing I can think of is that I have hit my limit of OLE objects. I have only got 81 records but will need more like 400 - 1000.
can anyone help?
View 1 Replies
View Related
Jan 16, 2006
Need a second opinion on this one, if someone has the time.
The boss is asking me about this:
Small db to track keys issued to individuals.
2 tables:
#1. ID, (with auto numbering for ID,) and basic name, SS #, etc.
#2. ID and Key number, Date Issued, etc, without auto numbering.
1 to many relationship (#1 to #2).
Cascadeing Update and Delete, and referencial integrity.
He has a form and subform based on a query, wants to do basic info entry on main form (for table #1), then tab to subform to enter specific info for (for table #2).
Problem is, when he tabs to the subform, he gets "Automation Object "Keys Issued" Not Available" error message.
I've found that in his querry, he is pulling the ID from both tables.
I can stop the error by eliminating the the ID from Table #1, using only the one from Table #2.
Is this just a fluke, or do you think I may have hit on the root cause? Any suggestions for problems to watch out for?
Thanks in advance,
BeckieO
View 3 Replies
View Related
Jul 7, 2006
I have searched the forums and I don't see this problem. I have a split database. When I test it it works fine. It resides on a network drives and permissions have been checked. When users try it they get an error message that says "you can't assign a value to this object". This occurs after they have selected a project and the user form opens. The user form appears blank.
I have gone to other offices and if I am signed on to their machines it works but if they are the message comes up. I'm at a complete loss and need some advice. It's probably as plain as the nose on my face but I've been struggling for days.
By the way - I used to be Mrs.Meeker...I haven't been around for a long time.
View 1 Replies
View Related
Mar 15, 2005
I have a db that is in a multi-user environment. I have a problem that keeps occurring. The problem is that I designed a report that is programatically sent via an email from a button on a form. The problem is a copy object error (run-time error 2501)that is occurring. The object wasn't canceled, ie the email wasn't cancel (which produces the same run-time error). This error just occurs. Doesn't occur all the time. The same report will be able to be sent (emailed) by the inspector either by the end of the day or by the next morning. So the problem doesn't appear to with the code (even though it still may turn out to be), since it works. The report has a unique name which is done by the coping the object and then deleting the object.
This problem is completly frustrating me and my users as it appears that it just "hangs up" when it so desires.
Any help would be greatly appreciated.
Thanks.T
View 8 Replies
View Related
Apr 29, 2005
Hello,
I am relatively new to Access and I am trying to update someone else's work so here goes. I have to revise a form to incorporate the new fiscal year. I have gotten variables named and feel comfortable that is correct. However, when I click on the "Run Query" button, I am getting the error "Object Required". I know this probably an easy fix but I can't seem to find it. I have attached the code for the form in a Word document. If anyone else needs additional information, please let me know.
Thanks
View 7 Replies
View Related
Sep 7, 2006
I had this error occasionally popup whilst testing my code.
I thought it was strange, because it was in a Microsoft message box, with a Microsoft message, not one of my own messages from my own error routines. This made it very difficult to isolate, I didn't have a clue what was causing it.
However I decided to track it down and to cut a long story short this is what I found:
Err_EditDetail_Click:
MsgBox "Error!"
MsgBox " Error From >>> EditDetail_Click() Error Number: " & Error.Number & " Error Description: " & Err.Description
Resume Exit_EditDetail_Click
End Sub ' EditDetail_Click()
Notice "& Error.Number" I don't know how this got changed from "& Err.Number" to "& Error.Number" but that was what was causing the Run-time error '424': Object required.
View 1 Replies
View Related
Aug 25, 2005
I created an application in access 97 under win2000 Pro. Some of the forms use a calendar button. The problem is that one of the users can not use the button, when trys to open it, the calendar is blank and the following msg appears:
ERROR 2863
THERE IS NO OBJECT IN THE CONTROL
thx for your hlp.
View 3 Replies
View Related
Dec 22, 2004
i am trying to call another form's object event.. and i am receiving error mesage "object required". Any ideas anyone? here is my statement:Call frmMain.cmdOK_ClickI do have both subs, the one being called and the one that this statement is in, both as public.thanks in advance!
View 1 Replies
View Related
Dec 1, 2005
Using Access 2k and Word 2k on a WinXp Workstation.
The code that I'm using is MS standard and has never previously given me any problems (see below). I've searched the MS knowledge base and Googled the error but nothing I find seems to relevant to this situation.
Can someone help?
TIA,
Mo
-----code----
DoCmd.Hourglass True
If CreateWordObj() Then
With gobjWord
.Visible = True
.Documents.Open "c:hp_lettersdrugsranout.doc"
DoEvents
With gobjWord.ActiveDocument.MailMerge
.Destination = wdSendToNewDocument
.SuppressBlankLines = True
.Execute
End With
'.ActiveDocument.PrintPreview
.Visible = True
End With
End If
End If
View 1 Replies
View Related
Apr 11, 2006
Code:
DoCmd.TransferSpreadsheet acExport, 8, "GENMAT", "c:downloadgenmat.csv", True, ""
Error:
Run error: 3027
Cannot update. Database or object read-only.
This database is running on a local drive and I am the administer. Any one run into this problem before? Any fixes or ideas?
View 2 Replies
View Related
Dec 2, 2014
I'm building a simple database for storing records about books.
I'm currently working on one of the data entry forms. Part of this form is supposed to enable the user to add details about the book and the series that it belongs to (if it does belong to one).
The relationship is One-to-Many: One series can have many books. I've made the series part a sub form.
When I enter some data to test that it works, I get an error message when I try to add a new series using the sub form. It says:
"You can't assign a value to this object.
*The object may be a control on a read-only form.
*The object may be on a form that is open in Design view.
*The value may be too large for this field."
As far as I know there isn't anything wrong, so I'm not certain why this error message comes up. I think it may have something to do with the primary key being the AutoNumber data type, but I just click 'OK' and ignore it, and it works fine.
The database works as far as I can see, I just want the error message to stop appearing.
View 6 Replies
View Related
Feb 24, 2015
I have been using this export function for the longest time and today it is giving me an error:
Object invalid or no longer set.
Export code:
Code:
On Error GoTo Err_cmdTest_Click
'Must 1st set a Reference to the Microsoft Office XX.X Object Library
Dim dlgOpen As FileDialog
Dim strExportPath As String
Const conOBJECT_TO_EXPORT As String = "EXPORT"
[code]....
View 10 Replies
View Related
Sep 27, 2005
I have an application that inserts records to a database, and it works perfectly on mysql
when i try to insert the records on access after inserting 340 records i get this error message that says
ERROR [HY000][Microsoft][ODBC Microsoft Access Driver] Object invalid or no longer set.
Is there any reason why i'm getting this message?
I'm connecting fine to the database because i'm inserting records, but it suddenly stops and i don't know why
View 3 Replies
View Related
Jul 13, 2006
I have the strangest error.
I have used a OLE Bound Object, so I could create a link to some .PDF files. Everything works great, and I was ready to roll it out to the users (boy will they be excited), when I noticed a silly error I could not get rid of.
After closing the .PDF file (which opened correctly) I get an error that reads:
---------------------------------------------
The operationon on the Acrobat Document object failed.
The OLE server may not be registered
To Register the OLE server, reinstall it.
---------------------------------------------
I have searched the internet, this message board and the Microsoft website, and have come up with little. I believe it might be a .dll error, but the only thing close I could find regarded MS Access 95/98. This is an MS Access 200 DB. I get the error on both a Microsoft 2000 machine AND a Microsoft XP machine.
I tried to use "On Error Resume Next" but to no luck.
If anyone has any ideas, I would appreciate the help/suggestions.
Thank you,
TJ Bernard
View 5 Replies
View Related
Sep 28, 2006
I'm not sure if this is a Query problem or a Report problem, so I'm putting it in the General catagory. If I need to post it in one of the others, please point me the right direction.
I have set up the following:
Query A - Combines data from several tables
Query B - Prompts for a text string and places it in a table
Query C - Uses the text entered in Query B to select records from Query A. The field that is searched is a text field.
Report A – Has an Open procedure that executes a macro that runs Query A. I also have a Close procedure that executes a macro that runs a second report based on Query A against a different table.
When I run the report on my desktop it works properly. I had a user try to run the report and she gets the following error immediately, prior to being prompted for the text.
Error:429;ActiveX component can't create object
I am running Office XP and she is running 2003 with SP2. She has not had problems with other Access reports in the same DB. Any ideas what is missing?
Thanks,
Christy
View 1 Replies
View Related
Oct 7, 2004
I am getting the following error when I run my report:
"The Object type argument for the action or method is blank or invalid"
I am running the following code from a report.
Thanks
Private Sub Report_Open(Cancel As Integer)
Dim intRetValue As Integer
intRetValue = MsgBox("CREATE EXCEL SPREADSHEET?", vbYesNo)
cswSetReportOptions
MsgBox "cswSetReportOptions complete"
'mac - new record source to filter blank company name
Me.RecordSource = "SELECT * FROM qry2 WHERE strCompanyName <> """" "
If intRetValue = vbYes Then
MsgBox "Creating excel spreadsheet"
DoCmd.OutputTo acOutputReport, , acFormatXLS, "Book1.xls", True
DoCmd.Close
End If
MsgBox "Creating Access Report"
End Sub
View 3 Replies
View Related
May 1, 2008
Hi all,
I have a form that runs from a query which combines data from 2 tables. I am trying to set up a filter on the form using a number of combo boxes and text boxes and a command button to fire it but I keep getting the above error (on the .Filter = strFilter line) and I can't see what the problem is with my code.
Private Sub cmdApplyFilter_Click()
Dim strSSType As String
Dim strArea As String
Dim strDepot As String
Dim strStatus As String
Dim strRisk As String
Dim strZone As String
Dim strContractor As String
Dim strFilter As String
If IsNull(Me.cboSSType.Value) Then
strSSType = "'Like '*'"
Else
strSSType = "='" & Me.cboSSType.Value & "'"
End If
If IsNull(Me.cboArea.Value) Then
strArea = "'Like '*'"
Else
strArea = "='" & Me.cboArea.Value & "'"
End If
If IsNull(Me.cboDepot.Value) Then
strDepot = "'Like '*'"
Else
strDepot = "='" & Me.cboDepot.Value & "'"
End If
If IsNull(Me.cboStatus.Value) Then
strStatus = "'Like '*'"
Else
strStatus = "='" & Me.cboStatus.Value & "'"
End If
If IsNull(Me.cboRisk.Value) Then
strRisk = "'Like '*'"
Else
strRisk = "='" & Me.cboRisk.Value & "'"
End If
If IsNull(Me.cboZone.Value) Then
strZone = "'Like '*'"
Else
strZone = "='" & Me.cboZone.Value & "'"
End If
If IsNull(Me.cboContractor.Value) Then
strContractor = "'Like '*'"
Else
strContractor = "='" & Me.cboContractor.Value & "'"
End If
strFilter = "[subSubstationType] " & strSSType & "AND [subArea] " & strArea & "AND [subDepot] " & strDepot & "AND [subStatus] " & strStatus & "AND [subRiskLevel] " & strRisk & "AND [subZone] " & strZone & "AND [subContractor] " & strContractor
With Forms![frmSubInfo]
.Filter = strFilter
.FilterOn = True
End With
End Sub
Any help on this would be greatly appreciated.
View 1 Replies
View Related
Apr 4, 2015
We have a ms graph object in the report. All the programming code relating to it is perfect and the graph displays correct too. But in some circumstances, the graph displays with different mold than it should be.
When we preview it in a single base, it works fine. Sometimes, in this way too the graph has a display error.
I have used the maximum potential solution to this, but all failed in vain.
1. Setting delays and refreshing the form and re-querying the graph data
2. Created a new database and imported all the objects and tried to run
3. Compact and repair database
4. Tried with re-creating the report from scratch.
why this type of error display is coming up with the ms graph object.
View 3 Replies
View Related
Aug 21, 2013
Basically I have a form where a user has selected a couple values from a dropdown element, and entered a few other text values into the form. I am then trying to grab the values and append them to a table.
Code:
Private Sub btnSubmitInputVendorPerformanceForm_Click() 'Button Is part of frmInputVendorPerformance
Dim ValueCheck As Integer 'Increments to make sure no errors in entry
Dim ErrorShow As String
Dim YesorNoAnswerToMessageBox As String
Dim QuestionToMessageBox As String
Dim DeliveryRate As String
[code]....
View 4 Replies
View Related
Nov 17, 2006
hi,
I am new to this forum and to MS Acess. i am not a software engineer or in the field of software. I had to learn as much as i could about MS Acess because of a project i worked on. I have a standalone MSacess database and one of the forms is giving me trouble when I try to enter a new record
The form is called frm_fragrances and has information about a fragrance.
the frm_fragrances has 4 fields in it and a sub form. the sub form has details about the fragrance
In a new record when I enter the 4 fields and attemt to go to the subform which has details about this fragrance I face this error.
an unexpected error haas occurred @2465: application defined or object defined error.
additional information
Active form:<frm_fragrances>
Active control:<txt_VendorName>
Previous control:<frm_fragrances>@Please call the developer for further instructions
I have looked in the FAQ and on this forum for help on error 2465 and cannot find anything to help me. I can work with forms to an extent but cannot write too much code.
I would really appreciate some help in this matter
Thank you
View 4 Replies
View Related
Jun 25, 2014
The following code is in the Form Current. As you can see if BranchCode = 2 I want to do a DLookup on the SystemPreferences table that holds a number Branch fields that hold document archive numbers for that branch. I want to move the number in the CroArchiveNo field into the field ArchiveNumber. I then run an Update Query on the system preferences table to add one to the relative branch archive number.
If Me.[BranchCode] = 2 Then
Me.[ArchiveNumber] = DLookup("[CroArchiveNo]", "SystemPreferences", "[SysPrefId] = 1")
DoCmd.SetWarnings False
DoCmd.OpenQuery "UpdateCroArchiveNo"
DoCmd.SetWarnings True
End If
My problem is that I get an error
Run Time error 2448
You can't assign a value to this object
View 1 Replies
View Related
Oct 10, 2012
I want to be able to click a field and it copies the field value. Just as if I were using Ctrl+C. THen I can go to excel or internet an paste it. i have the code:
Code:
ClipBoard.SetData = Me.GBL & vbCrLf
Me.GBL.SetFocus
Me.GBL.SelStart = 0
Me.GBL.SelLength = Len(Me.GBL)
I keep getting an error 424 Object required. How do I fix this or is this even on the right path?
View 2 Replies
View Related
