I have a report that I want to pint the beginning date and ending date range that the report was based off of.
I have a query that prompts for begining date and ending date
I want the print to look like this.
Current Report Date : 01/01/06 to 01/30/06
Any Ideas
Thanks
Dean C
Giles Chemical
Is there a way to show the earliest and latest dates of a report generated by a non-date field?
E.g. I generate a report based on Food, and it'll list the days that this food is associated with. Is there a way to show the first and last day that appears in this report (i.e. the range of dates that the report shows based on the food selected)
I have created my report for a table and how I want it to look. The problem is when I enter my dates the report pulls however at the top of the page the range of dates just says #name rather than the dates I entered. I used sample information from a database access creates to make my report and the dates not showing up are the only issue so far. I entered sample orders into my table. The dates to enter into the date range would be 11/01/01 through 11/30/01. I have attached this sample, can someone help me with what i am doing wrong please. I'm just not sure, I have been having a lot of problems creating this database.
Thanks
I'm having issues with reports. What I want to do is only print specific dates in a report. I have read and tried everything to accomplish this but it just isn't working. Any suggestions????????????
View 2 Replies View RelatedI created a query with: Between [Forms]![Dummy]![StartDate:] And [Forms]![Dummy]![EndDate:] in it.
I created a Form with two text boxes named StartDate and EndDate and appropriate labels and buttons.
I then Created a Report, which prompts for dates and finds the data between the given Dates correctly.
Now the problem: When I create a text box in the report of the following form, I get ?Name? error on the Report: =[Forms]![Form Name]![StartDate] This should work?
Can you help me solve this last problem and acheive a good working program?
I am using a simple " >= [BeginDate:] and <= [EndDate:]" in the criterion section of a query to allow a date range to be selected in the query which is used in a report. How can i get that [BeginDate:] and [EndDate:] info available to print on the report so it shows the actual date range being displayed in the report ? thanks.
View 2 Replies View RelatedHi all,
Can anyone tell me if it is possible to input just one date range into a report that is accessing data from multiple table and multiple queries. I can create the report which gives me the info needed but I have to put the same date range in 3 or 4 time before the report is generated.
Thanks
I'm trying to make a form where the final user can type in two dates (date range) and the result will generate a report on all activity between those two dates, any ideas ?
Culedude
I have a database with several clients who have a series of appointments. I want to be able to create a report of all the clients to be seen during a range of dates to be inputted by the user. All help would be greatly appreciated.
Andrew
I have operators that enter equipment downtime information into the database. I need to create a report that pulls all records that have a start date and time based on a start date (field name FromDate on form) at 7:00 AM to an end date (field name ToDate on form) at 6:59 AM and shows the total duration in hours for each record.I'm having difficulty getting my query to display the correct results for the date and time range. Duration calculations work perfectly.Here is my main table only using fields pertinent to this post:
Field Name Data Type Description
Exception_Number AutoNumber Primary Key
ExceptStartDate Date/Time Start Date formatted as Short Date
ExceptStartTime Date/Time Start Time formatted as Medium Time
ExceptEndDate Date/Time End Date formatted as Short Date
ExceptEndTime Date/Time End Time formatted as Medium Time
[code]....
The data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.
The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.
I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.
View 1 Replies View RelatedWhat I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.
View 1 Replies View RelatedI have the following project that works as a timesheet manager:
Users enter in a form the employee name/date/hours worked/role/overtime (yes or no)/rate... on a daily basis. At the end of every week, they must create a report depending on the dates given in a query.
I have only one table (tbl_EmployeeHours) and a query to calculate the number of hours between two dates.
At the moment a report gives me all the information above (employee name/date hours worked etc..) but what I am trying to is a bit different.
I need Access to create a report (based on a date range given by the user) that would give me: per unique name, the number of normal hours worked in total, next column, the number of hours worked as overtime (rate 1.5), then, the number of hours worked as overtime (rate 2).
This means there are 3 different totals. For example, in the date range given, someone might appear twice but in the report he will appear only once with 3 different totals...
My guess:
I would say I need to create a different query for the 3 different totals (normal hours, overtime 1.5 and overtime 2). For each query you would need to ask the user to input the date range (which would not be so user-friendly I agree...). Then, I am not sure how access would create that list of names and combine the 3 different results from the queries...?
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
I have some code that filters job raised I have 2 text box's txtdatestart and txtenddate after entering. date range between the too text boxs it shows me all job raised with in the period.i have entered what I would like is filter it again by client field using combo box cboclient so if the user enter's client name in cboclient combo box and date range in txtdatestart and txtenddate it will only show jobs raised with in the date range of the client enter in the combo box but if the combo box is empty show.
Code:
Private Sub cmdPreview_Click()
'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it working.
Dim strReport As String
Dim strDateField As String
Dim strWhere As String
Dim lngView As Long
Const strcJetDate = "#mm/dd/yyyy#" 'Do NOT change it to match your local settings.
[code]....
I am trying to filter out information for an ODBC query I have written, to obviously make it more concise. Because our data is not set up very logically, a lot of my queries are based on text...but that is another story. My current situation starts with a simple make-table query finding certain data within a date range. This is followed up by another simple make-table query to find other specific data within another specified date range. Then I have a cross-tab query between the two tables to locate all the data that shares the same unique identifiers. My problem lies with trying to only pull information from a certain date range. For example, I want information to be included if the data has the same unique identifier as well as falls within +/- 7 days of the received date (dd/mm/yyyy) also listed in one of the tables. Each record will likely have different received dates so I cannot set it as a constant.
Make sense to anyone? I am not confident enough to play around with some expressions...well it is more I haven't been successful at using them correctly.
All help is greatly appreciated.
Thanks,
Jay
I Have a table that I collect data for numerous ID's. One ID may have 5 dates that is was serviced. It is due to be serviced at set intervals which is calculated from the most recent service date. I'm calculating the next service date in a text box with the DateAdd func. =(DateAdd('m',[Cal Freq],[MaxCalDate])) with the MaxCalDate being a Max func in a different text box for selecting the most recent sevice date. I'm trying to update the [Next Due] field in the [Master Asset] table with the calculated next service date so I can do queries on items that are due service within a date range. If I do an Nex Due Expr1: in the queries to calc the next due service date then do a criteria on that Expr1: such as >=[Start Date] And <=[End Date] it states datatype mismatch? Is there a way to select a requested data range on a calculated type date/time? Or How can I update the [Next Due] filed in a different table?
View 8 Replies View RelatedHi I am new to the forum. :)
I am creating an access database that holds customer information for a friend of mine. I am struggleing to think of ways to make Access do several tasks.
I have created several forms that display when reletive buttons are clicked and some run automatically using queries, one of which runs a query that displays any upcoming service inervals that are within thirty days of the current date, and allows the user to print a report that is designed to be a service notice for the relevant Customer/s which contains the customers address, phone numbers and service due date with a small pre-made text insert that advises the Customer about the upcoming service recommedation. The Form also provides the ability to print address labels for the same customers, making it quick and easy to send them out by post. The problem that I am having is that I would like the customers information that has already been printed to be removed or greyed out in someway so that the query does'nt print out duplicates but also have the ability to allow user control to reprint any result that may for any reason need reprinting.
Thanks for any help
Christopher
Hi
I'm pretty new to all of this. I've set up a simple database. I have a form in it for inputting information and then there is a command button on the bottom which prints out a report I've created with the information on it. This is all working great except it prints evey record and I only want the current record printed out.
I've tried the help and it goes into detail about OpenReport and PrintOut in macros. I have no idea what a macro is or what to do with it.
Can anybody please help me and give me step by step instructions as to how to print out only the current record in the report from the command button.
Your help is greatly appreciated:)
I have a form (entry screen to enter data) I then created a report in the layout I need for my order form. I want to creat a button that a user can press and it will print the current record to the report (order form layout)
Here is my current code for the print button on the form page:
Private Sub btnPrtOrderFrm_Click()
On Error GoTo Err_btnPrtOrderFrm_Click
Dim stDocName As String
stDocName = "rptOrders2"
DoCmd.OpenReport stDocName, acNormal
Exit_btnPrtOrderFrm_Click:
Exit Sub
Err_btnPrtOrderFrm_Click:
MsgBox Err.Description
Resume Exit_btnPrtOrderFrm_Click
End Sub
The only problem is when I tell it to print if I am on record number 2 on the form, it prints both record 1 and record 2. I only want the current record i am in to print. Any ideas much appreciated
Dean
Hi all, i'm having a rather annoying problem. When I view my report I have 2 sets of conditional formatting that run, one that changes the back colours of certain fileds when the criteria is meet, and the second, the text colour of certain fields, both of which work fine when previewing the report. However, when I print the report, any of the back colour in the preview does not print out but text colour does. If I print from another office programme i.e. Word, block colour is printed fine its just seems to not work in my access.
Please note that if the same report is printed from another computer, it prints fine.
Please does anyone have any idea on why this is happening and how to sort it. Thanks in advance for any ideas and help.
I had made my own database for my own business.
I am trying to print a report from a form. Once i enter an order detail i finish off by printing a letter. At the moment we are doing this via a query by entering the order id.
I want to automate this so for the form record i am in i want a button to print a report for that record only.
I know this can be done as i rember doing this in college but i cant get my head round it at the moment.
Please help
Hi, Ive read all I can on forums and web and am still unable to print the current forms report using a command buttons on click. This is the code i have been playing with:
Dim strDocName As String
Dim strWhere As String
strDocName = "Home_Oxygen_Report"
1. 'strWhere = "[general_info.HospitalNumber]= Me!Home_Oxygen_Form!general_info.HospitalNumber"
2. strWhere = "[general_info.HospitalNumber]= "" & Me![general_info.HospitalNumber] & """
3. 'strWhere "[general_info.HospitalNumber]='" & Me![general_info.HospitalNumber] & "'"
DoCmd.OpenReport strDocName, acViewPreview, , strWhere
Number 3 gives the closest result but it prompts me to enter the primary key when i hit the command button but i need it to do this automatically. The primary key is a text box not number. Note that the primary key is HospitalNumeber of Table general_info (form and reports record source is query of many tables).
any help would be muchly appreciated!!
Tania
MS Access 2003
I inserted an image (jpg) in a report, it appears in PrintPreview, but not when I print it on my printer.
Please help me. I do not if the problem is with my printer or I'm doing something wrong when inserting the image.
update: It seems to work when printing from Print icon, but does not work when printing from File/Print menu. Is this a known bug?
Need how to help on printing reports in Access
Problem: I have a databse that is on a network at the office. My users are out in the field using mobile data computers linked to the network using verizon air cards (56.6 kbps modem). Whenever they want to print a report, since the front ends of the DB are on their computers and the back end is on the server, the mobile computer has to send the actual report from the computer over the air card to the server for printing. Each page takes 5-7 minutes before it prints at the office.
Question: Since the data resides in a table on the back end on the server, Is there a way to have the reports reside on the server as well and have the Mobile computers simply send a command to print the report from there so it's not having to send all that information over the incredbly slow air card? Or am I just going about this the wrong way altogether?
I'm not totally up to speed yet on all this computer lingo so please use little words (LOL).