Problem With Bound Field Refresh On A Form
Jun 12, 2006
Hello All,
I am new to Access and VB and have gained some very very useful tips from this site whilst compiling my new project.
I have a question which I have been unable to find anywhere here.
I have two tables at the moment. One is the main table from which my form is created. My second table is a list of registrations and the corresponding number of current hours accrued by the registration (eg ABC has 512 hours used)
I query the rego table on my main form to give me a listbox so that for each new record, the user can select the rego, and the starting hours are automatically filled in the 'Start hours' field on the form (using an after update event to set the hours after the rego is selected), which is bound to the 'Start Hours' Field on the main table, so that when it is saved, the info saves to my main table.
When the user returns, they then enter their Finish hours, and this finish hours is then written to the rego table, so that next time the rego is selected the start hours is the same number as the finish hours from the last time the item was used.
Now for the problem. Users can fill out some parts of the form, and take it before the finishing hours are entered for the previous record. Therefore, when they return to enter their finishing hours, the starting hours hasn't updated on the form, and it doesn't change unless they reselect the rego from the list box to trigger the after update event.
Is there any way, (I have tried, Me.Refresh, Requery etc) I can get the after update event to fire in the current form automatically, ie without having to reselect the same rego again? Is there a way to just refresh the rego field so that it thinks that it has updated and triggers the after update?
I may have now made it clear as mud, but this is my first post so any help would be very much appreciated. I can elaborate on any problems if needs be.
Thanks in advance for your help!
View Replies
ADVERTISEMENT
Nov 5, 2012
I've created a data entry form w/ 7 fields.... [f1], [f2], [f3], [f4], [f5], [f6] are bound to a table. While [f7] is unbound and has Nz function.
Now, the value of [f7] is the summation of [f1] to [f5], i want that what ever value is generated by [f7] will be stored on [f6] in both forms and table...
View 1 Replies
View Related
Sep 2, 2013
I'm using Access 2007. I've created a table with two fields. "Novice and Recertification" as in combo box.
I put it on the form. Now the idea is when a user clicks Recertification, it shows up on the report. When the user clicks on Novice, it should be empty on report (Reason why I want to keep novice is so that we have a record of it.)
Now the challenge is I added another column, empty field for Novice and Recertification for Recertification. Thing is if I set the bound column, I select on an empty field on form and it will be empty on report. But I want the user to see Novice on the form and it must not show on the report.
View 3 Replies
View Related
Mar 20, 2013
So I'm not new to Access but I am to 2010. It has been a bit "challenging". Here's my first question:
1.) I'm trying to search on a field by using a command button. I basically want to click the button and the following message pops up: Enter MRN.
2.) When the MRN is entered, I would like the form to filter on all records that have this MRN.
3.) In old versions of Access, I would create a Macro for this and then call the Macro in the form.
4.) I've tried the FindRecord action in the Macro but it does not work. I actually came across several actions that don't seem to be working properly (getting error messages).
5.) In my head, this should be one of the EASIEST things to do. I've done this before in several different databases. I will admit it has been a few years since I have used Access for this (ie. building forms, macros etc.). I've primarly used it to pull in a data set and then run some queries to get the data I need quickly versus using Excel.
View 5 Replies
View Related
Sep 4, 2013
I need to refresh listbox field (Total_price) situated on parent form. My sub form is called "Lines_form". I want to sum values of all lines for column "price". Result of calculation I want see in parent form in field "Total_price". My parent form is called "Main_form".
On "price" field settings I used AfterUpdate event : Me.Parent!Total_price.Requery
I see result in parent form, but value isn't saved to table and I can't use it in next calculations.
I need refresh/requery/save patern form. I try this code:
Me.Parent.Form.SetFocus
Me!Parent.Form!Total_price.SetFocus
DoCmd.RunCommand acCmdSaveRecord
but it doesn't work.
View 3 Replies
View Related
Aug 10, 2014
I have a field on a form that is the results of a dlookup to a table.field. I want the value to be updated when I execute a button that is running a macro. How do I do this automatically, and not have to hit the refresh button?
View 5 Replies
View Related
Oct 17, 2005
Hi,
Have two controls GroupID and Shift which are linked with Criteria:
SELECT tblShifts.Shift, tblShifts.GroupID
FROM tblShifts
WHERE (((tblShifts.GroupID)=[Forms]![fmPersonalDetails]![GroupID]));
Have two other controls which are Position and Grade with same type of link.
Problem is When I try to edit the Shift control an error message comes up saying 'cannot edit bound to unknown field 'Shift'.
Have checked each of the property fields with the Position and Grade controls and are the same. Spelling is the same in the table. Are there any other obvious things I should be looking at because I'm pretty new to this and cannot find the solution.
Would be grateful for some input/suggestions.
View 8 Replies
View Related
Nov 25, 2005
In my Textbox Control source I have given a formula =[Product Price]+[Delivery Costs].
I would like to provide an option to ther user to overwrite this Textbox (Should able to input a value).
When I try to edit the calculated value on the form, I get a message "Control cannot be edited, bound to expression". What can I do?
View 6 Replies
View Related
Jul 14, 2005
is there any problem with fields in differnent tables that have a field name that's the same? My concern is the control source for a bound control. Access can keep track of this if a few of these similar field names are on the same form and bound?
scratch
View 3 Replies
View Related
Aug 16, 2006
I have a form with several fields bound to a table, and also a listbox of records that are not bound to any table. What I want to do is to be able to double-click a record in my listbox and have the record show up on my form in a particular bound field, and also become a part of the underlying table's record.
Is it possible to do this? If it is, how would I do it?
Thanks in advance to all who are willing to help!
View 4 Replies
View Related
Aug 10, 2005
Hi
I've created a listbox and am using the following code
stWhat1 = "": stCriteria1 = ","
For Each vItm1 In Me!LstArchive.ItemsSelected
stWhat1 = stWhat1 & Me![LstArchive].Column(0, vItm1)
stWhat1 = stWhat1 & stCriteria1
Next vItm1
Me!txtCriteria1 = CStr(Left$(stWhat1, Len(stWhat1) - Len(stCriteria1)))
The problem is that my bound column is a text field. I'm really struggling on where to put my quotations so that I get the following with the In function
In('00638','00639').
Any help or pointing in right direction would be very much appreciated
Carrie
View 3 Replies
View Related
Nov 25, 2006
Hi,
When i try to select a record from a combo box this message appears in the bottom of the screen :
Control Can't Be Edit; it's bound to AutoNumber field 'EventID'
It will not let me choose a PK/ID. what am i doing wrong or what setting needs to be changed?
thanks
View 3 Replies
View Related
Apr 10, 2007
Hey guys, I am trying to input data into a form, the form consist of mulitiple tables. Once I set it up I get a "#Name?" error in the text box, and when I try to input data into the text box, at the bottom of the form it keeps saying "control can't be edited; it's bound to unknown field 'FieldName'."
Can anybody help me with this problem?
Thanks
View 8 Replies
View Related
May 17, 2013
I have written a code to look up by the unique reference number rather than use the wizard to avoid this error happening... The field is restricted to list only so you can't actually edit the number.For ease of use you cannot scroll by record and I need to filter by the ID. Is there an easy fix to this combobox?
Would creating a seperate query work? Is there another lookup code I could use where I don't need to have the combo box bound to the ID field since it's not being edited anyway? I had a go at one and although it would now let me select it wasn't updating the record, tried a few ways but it seems that it needs to be bound to the field.
View 5 Replies
View Related
Feb 9, 2015
Access 2010. The first table is called Clients.The Primary Key field for the Clients table is an AutoNumber field called ClientID.The other two relevant fields in this table are ClientFirstName and ClientLastName. The second table is called Contacts.In the Contacts table is a foreign key field, bound to the ClientID field from the Clients table, and also named ClientID.
On the Contacts table, the ClientID field properties are set on the Lookup tab as follows:
Display Control: Combo Box
Row Source Type: Table/Query
Row Source: SELECT clients.ClientID, clients.ClientFirstName, clients.ClientLastName
Bound Column: 1
Further, in the Row Source's Query Builder, ClientFirstName and Client LastName both have Ascending selected as Sort criteria.
Everything works as intended: When entering data into the the Contacts table (actually, the data is entered via a form built from the Contacts table) the data entry person can click the drop-down on the combo box for the ClientID field, scroll through ClientID records, and see unique ID numbers sorted by first and last names. And the actual data for the field is stored properly as the unique ClientID number.
When entering ClientID data into the Contacts table (or form), is it possible to enable autofill based on ClientFirstName and ClientLastName, rather than ClientID? For instance, let's say we have a few clients named Joe Smith. It would be great to just start typing "Joe Smith," and have the field autofill the ClientID number for the first client named Joe Smith. The intention is to make data entry a bit quicker.
View 3 Replies
View Related
Jan 22, 2015
I have only one bound text field in my report. By default, it shows the results (150 records ) vertically. I wish to show them horizontally, 5 in a row. How to do this.
View 11 Replies
View Related
Jul 31, 2013
One of my forms has a text box which is bound to a field called teenumber. This form is set up that "on current" has code
If Me.teenumber = 0 Or IsNull(Me.teenumber) Then
Me.teenumber = Nz(DMax("teenumber", "tblteeofftimesshotgun"), 0) + 1
This enables the text box teenumber to be auto filled with sequential numbers growing by 1 for each record. This database is for a golf tournament and this form enables user to set up tee times for shotgun start for the players.
When the user gets to tee number 18 or whatever the last hole on the course is the teenumber field needs to be reset to 1. With the above code I a unable to do this.
View 11 Replies
View Related
Jul 14, 2014
Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
View 14 Replies
View Related
Sep 12, 2014
I have several combo box fields in a bound form where they are selecting values from a list (values stored in a separate table) and then loading a number into the bound table field when selected.
How can I put a text prompt in these fields when loading the form which gets removed when focused and of course is not permitted to attempt a save into the bound numeric fields? I've done quite a bit of searching but can only find materials about doing this on bound text fields. I've also seen solutions using Nz which don't seem to work.
View 4 Replies
View Related
Oct 22, 2014
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
View 1 Replies
View Related
Aug 19, 2014
I have a bound form which is from tblEmployee, I'd like to have a dataset below (like a splitform but not a split as they have limits) so when i search in the box it gives me say all the smiths - i select for example david smith and it displays his information in the form objects above so they can be edited?
View 1 Replies
View Related
Feb 25, 2015
I have a form which has a field named VendorID it gets data from the following query
SELECT TOP 2 V.VendorID, V.VendorName, COUNT(A.ClaimNumber) AS Total_assignment, V.VendorStatus
FROM dbo.VendorMaster V LEFT OUTER JOIN
dbo.VendorAssignment A ON V.VendorID = A.VendorID
GROUP BY V.VendorID, V.VendorName, V.VendorStatus
HAVING (V.VendorStatus = N'Active')
ORDER BY COUNT(A.ClaimNumber)
So, if we look at the code it should give me top 2 by ascending , but whats happening here is once i refresh it gives me top 2 and it stays the same until and unless i go to view mode and come back to the form mode( refresh) again. automatic code or something which can make this one update automatically?
View 4 Replies
View Related
Oct 13, 2006
I have a unbound form in my data base now i want to bound it to a table in the database .
how to do it
View 2 Replies
View Related
Aug 8, 2013
I have two fields on the main form and I need a total count of records between the value of the two and then enter the total in a bound field on the main form
View 1 Replies
View Related
Feb 6, 2005
I have a database that has student table (I am not a student doing an assessment!) with a one to many relationship to coursebooking and then a course table that has a one to many relationship with the coursebooking table so coursebooking seems to be acting as the link table between the many to many relationship. (I didnt design it).
I am creating forms to make the booking process faster and to perform the correct sums to produce an invoice and update a financial transactions table along the line.
I have an entry form that creates the student, and then other forms synchronise to the master form and gather the data. I am now at the point of wanting to get product details so ex course A, taxi to school and enrolment fee and add these to the booking table.
Historically the process was messy and couldnt calculate course A cost (per week) times by number of weeks.
I want to be able to select the products from a combo to build up an invoice and then once acknowledged as details correct commit to the tables coursebooking and transaction table.
I am not sure how best to achieve this ie is it best to have a bound form to the booking table and add new records to it line by line or to use an unbound form and some kind of product picker and to see the products built up perhaps using vba and storing products in an array until ready to post.
Some advice would be most welcome.
regards
Peter
:eek:
View 1 Replies
View Related
Feb 14, 2006
I have a form that has a subform in it. I want the key field in the form to dictate what fields show up on the subform. When I try to set the Link child and master fields, I get a 'can't build a link between unbound forms'. How do I make this subform bound to the form????
Thanks, JOe
View 3 Replies
View Related
