Hi
I am using Microsoft Access 2003. I want to clear the contents of a combobox in vba code. I found that there used to be a method called cmbbox.clear() but cant find this method in Access2003. Can someone throw some light on this.
Thanks
I would like to be able to clear a combobox selection with code but nothing I have tried is working.
Most recently I have tried this:
Code:
Me.cboCompanies.ListIndex = -1
To no avail. The selection still remains highlighted in the control after the code is executed. I want the control to be blank. Also the control goes from being a combo box to a text box until escape is pressed and it is cleared
I have also tried using a simple Undo and that is not working either.
Hi All,
I am facing a critical issue with Access 2003 Forms. The project is successfully running on all PCs except 2-3 PCs. It throwing an error while performing a button click event. Below is the error message which I m receiving. The form works fine if I modify or update and than save, but when create new record it throws an error.
Error Message:
The expression On Click you entered as the event property setting produced the following error: Function is not available in expressions in query expression
*The expression may not result in the name of a macro, the name of a
user-defined function, or (Event Procedure).
*There may have been an error evaluating the function, event, or macro
Pls help.. its very urgent.
Thanks & Regards
Deependra...
Hi all,
I was thinking if some could suggest me how could I make DAP which will have only one text box and command button in which will the value written there be forwarded to some parameter SQL when that button is pressed...
Do you know what VB code should I implement in onClick action for that button so he could start some query who would use value placed in that text box and then generate results in DAP....
Any comment is appriciated!:rolleyes:
This may seem to be a couple of strange questions, but nevertheless, I have not been able to find anything that have answered my question, so, please help me:-).
I am currently working in Access 2003 (nop, an upgrade to 2007 is not an option:-/) and I am making a database containing my companys employe, their workplace, plans for the future etc etc.
I would really really really like to be able to attach a picture of the employes in in this database, but I really canīt find a simple way to do this, not even in MS help.
Furthermore, I would like to be able to attach files, such as documents, so that I cah doubleclich on them, whereafter they open in etc Word.
Is this possible, (in a simple way) or do I have to go deeper into Access.
Thanx from a desperat administrator:-)
Hi,
I am used to access 2000 but at the moment I am using access 2003. When I first started using it, I had the usual database window showing - by this I mean the one that has the table, forrms etc listed on the left and when clicking on one of them the created tables, forms etc are listed as will as the option to create.
Somehow, this has disappeared. I have made sure that in the startup "Show Database window" is ticked, but after searching the net, have not been able to find any other suggestions as to how to fix this.
Hope some kind person can point me in the right direction so I can see the tables, queries that I have created.
Thank you for your time
Hi All, I'm looking for a simple way to clear a all of a specific field in a table (check box). I've put a control on the form but I'm not sure what/how to make it work. Any ideas/suggestions welcome. Thanks, Tim
View 3 Replies View RelatedI'm developing a database with a field call tag. Users are tagging records by puting specific numbers into that field. It works well, but I need to clear them.
I need a button on a form that once I press it will automaticly clear tag field for all the records. Any ideas?
Hi all
Im not sure what is the best way to go about this.
I have a table with 8000 records and on one of the fields the department name is wrong. eg should be "Marketing", but some records have the name "Marke" or "Marketi"
Is there an easy way to update this field to add on the missing characters ?
Thanks in advance
On a form I have 2 search unbound fields called keysearchword and guestsearchword. Each has an On Exit event that performs their respective searches.
If IsNull([Keysearchword]) Then
strLinkCriteria = "[Keywords] Like '*'"
Else
strLinkCriteria = "[Keywords] Like '*" & Me!Keysearchword & "*'"
End If
DoCmd.OpenForm strDocName, , , strLinkCriteria
However, after the first find, I see a "(filtered)" next to the correctly displayed records. At this point however, I can't even get the cursor into the second guestsearchword field.
What am I doing wrong and how do I fix it?
I urgently need a way to clear a table in a different access database, this table is not and connot be a linked table. Please help.
Regards,
Richard
I have been tweaking my friend's database for him. I included some sample data in the main table (ficticious names and addresses etc.) and in a linked table.
I want to leave the sample data in so my friend understands how the database works. However, once he has tested it, he will want to blank those tables (not all tables, though), and reset the primary keys to start from 1 again.
Can I have a button on a form that will do this? Obviously with an OK/cancel message box. If so, how?
The tables are called Main and Workshops.
Thanks in advance for any help!
I have a query parameter that I'm running from a form and it works fine the first time. Pops up and asks me for the parameter with no problem and the query runs fine. However, if I run the same query again it doesn't ask me for the parameter - it just takes whatever I entered the first time. How do I clear this so it always asks me for the parameter?
View 5 Replies View RelatedHi
I have set up a simple password system to allow someone to have access to some forms within my database that I don't want others to see. I have created a pop up form for the password based on using the Input Mask Password. The password log in works fine but the password stays in the input box so if another user clicks on the button that brings up the password pop up form, all they have to do is press enter or click the command button and they are through.
How can I get the password input box to clear itself - probably on closing the password form?
I'm sure it's a simple piece of code but my knowledge of VB is limited and everything I have tried brings up an error of one sort or another.
Thanks for any help.
I have a one page form set up into 4 different sections. Each section has its own command. First section is Radio buttons with a drop down list. The next three are text boxes. I have a rather simple question, next to my OK command button I want a to create a button that will say "Clear" and I want it to clear the text inside the text field but if possible to clear the radio buttons and the drop down list too. Its not a main concern about radio buttons because you can just unclick it. But I was not sure what the VB is for clearing text inside a text box.
Thank you.
I have a command button on a form which i would like to click on to clear all the textbox on a form. Witihn the event procedure of the command button i have tried cylindernumber = "". This does clear the text box however it deletes the information from the table to, which i do not want to happen. I just wnat the text box to be clear once the button is clicked on without deleting the information from the table.
View 4 Replies View RelatedI'm looking for a way to clear the fields from a form after I finish entering data into all the fields (enter button or something). The form only displays one record at a time. My problem is that after a distraction (phone call, etc) I sometimes wind up coming back and entering data in the last displayed record which messes up that record. Or is there a way to automatically advance to a blank form when finished with a record?......
Thanks,
Dave
I have created an email message to be sent via a closing button on a form, using the DoCmd.SendObject command. It all works fine except that MS Outlook then puts a message box on the screen with a countdown bar saying that MS Access is trying to access Outlook and to press Yes if this is to be allowed.
Is there any way that I can disable this message box please. I appreciate that this is more an Outlook problem than an Access one, but some database programmer has probably come across the same problem before.
Many thanks
Roger,
Newcastle, UK
I have a one page form set up into 4 different sections. Each section has its own command. First section is Radio buttons with a drop down list. The next three are text boxes. I have a rather simple question, next to my OK command button I want a to create a button that will say "Clear" and I want it to clear the text inside the text field but if possible to clear the radio buttons and the drop down list too. Its not a main concern about radio buttons because you can just unclick it. But I was not sure what the VB is for clearing text inside a text box.
Thank you.
i have a form with cascading combo boxes, all of which are set to requery the combo boxes below, however i have one which is Service SubType, and it should requery Provider and Subjective, however it only clears the Provider and the previously selected subjective is still there, when you click on the downarrow it does give you the new list of subjectives.
my code looks like this:
Private Sub cmbServiceSubType_AfterUpdate()
Me.cmbProvider.Requery
Me.cmbSubjective.Requery
End Sub
how to get it to clear the boxes I have asked it to requery.
Is there a way to have a command button on a form, when pressed change all fields in a Table to show unchecked? I am using a Table that has nothing but Yes/No fields in it. If this is possible, what might the code look like? Table name is "InputH-1".
You guys/girls are awesome! Thanks in advance for all your help!
I finally finished the database.
So I decided to remove all the test data.
Now I get errors like
the linkmasterfields property has produced this error "the object doesnt contain the automation object
when I try to enter new, live data.
Also, I get
The microsoft jet database engine cannot find a record in the table ... with key matching fields ...
I know the fields are there. I know it works. What in heavens name is going on????
Hi all. I'm just getting into Access, so I am still learning pratically everything. Here is my issue-
To learn Access (2000), I have created a very simple database (from scratch) for creating a grocery shopping list.
The database works very nice and is useful to creating a shopping list. I created a table of grocery items with a YesNo field indicating that the item is to be put on the grocery list. I then created a form that shows the stores (that I shop at) with a subform that shows the grocery items on the list. The subform can be altered so I can check the box (for the YesNo field) for the items for the grocery list. Then I print a report that displays the grocery list based on the Yes in the checkbox.
What I would like to do is to be able to clear the check boxes all at once when I create a new gorcery list. This way I do not have to go through 50 items and manually unchecking the boxes before creating a new grocery list.
Is there a way to do this? I appreciate any responses- I am a hardware troubleshooting pro, but not fluent in programming- So please go slow !!!
I have a switchboard which gives two selections. Upon selecting a menu item, the new menu appears. If I select from this new menu, it runs as it should do. However, upon returning to this second menu, the button remembers where it was instead of being cleared to select the same item, if desired, again. How can the option box button be cleared as do the switchboard buttons?
View 1 Replies View RelatedI have a form register with student names and three columns with checkboxes showing whether they were present, absent or late. The form runs an append query that records the data into a historical table, however on submission the checkboxes remain ticked. way to clear the checkboxes once the data has been submitted?
View 13 Replies View RelatedI have two list box that control 5 subforms. i have a Run button that works in sorting the subforms according to the listbox. I have a rest button that i want to clear the selections of the listbox and then requery the subforms as if the criteria were null - or return all records. i have the selections clearing, it is just my forms are not "going back to all" on the requery.
Private Sub Command62_Click()
Dim varItm As Variant
With clinicLbx
For Each varItm In .ItemsSelected
.Selected(varItm) = False
Next varItm
End With
[code]....