Would like to create a sum of a field in a sub form. I am using =sum([name of field]) in the footer of the sub form but it only gives me the answer of the first entry in the form. I also created an unbound box in the detail portion =[table1 subform].[form]![name of field]. What am I doing wrong?
View RepliesHello, I am a newbie access user, so this might be a stupid question, but here it is:
I have a lot of yes/no fields labeled "10/1", "10/3", "10/5", ... (dates)
They are to record attendance on particular days.
I want to make a query that gives me the sum of a student's attendance and I have no idea to go about that. Any help is much appreciated.
Thanks!!
Hi,
Not sure if this is possible (sounds simple hopefully) but I was wondering if there was a way to sum certain fields in a record on a continuous form.
E.g. Field1 and Field2 in record 1.
Is it something simple like summing columns, i.e. Sum(Field1)?
Any help would be much appreciated.
Hi,
I am trying to figure out the best way to design a table. The table is going to contain data concerning checks that have been given to a church. Each check could be broken down into 3 different categories; Tithes, Offering, Other. In other words one check for $100 dollars might be Tithes $40.00, Offering $30.00, Other $30.00. I need to be able to enter these three amounts into the record and then have them totaled in another field.
Is it best to do this all in one record or should I have two tables? If I have two tables how do I get one form to enter the break down into one table and the total in another table. Fyi, if I do this in one record I don't want them to have to enter in the total. I want the total that is entered to be calculated by the three previous fields.
Thanks for any help you can be on this.
Is there a way to use a query to sum totals of several fields per record? In the db I have designed, I have 5 seperate fields for estimates from different departments. There is also a field for Total estimates. What I would like to do is have the Total Estimates field autocalculate the total sum of the other 5 estimate fields. Is this possible to do through a query? If so how? If not - is it possible at all?
Thanks!
I have 2 fields, Accounts, Accounts CMO. I need those two fields to show in the same table in a new field called Total Accounts. I am summing them, but getting irregular results, some are right, and some are 4 times more than they should be? How would you go about doing this, maybe I am missing something.
View 1 Replies View RelatedHi! I'm trying to create a query using option groups, i have two options the first one is STOCK and the other is PD.
If i select stock the the query i want to create to introduce it on a form is:
I have 5 fields
-denominación
-reserva
-almacen
-cantidad
-stmax
If i select stock
then the query is
If (reserva +almacen)<cantidad then on a sub form have to appear the table with all the rows where (reserva +almacen)<cantidad.
but if i select PD only have to select on stmax the rows where value=PD
PLEASE i need help with this....
I have run into this problem with several databases I have created. I have my tables all set to store my information. I create the form to enter the information. I try to create the field to calculate a total and every time I enter the amount in the form, I get '?name' or '#name'.
With this particular database, I am looking to track expenses. Expense categories on the left, dates across the top, amounts in the middle, totals across the bottom for dates and down the right for categories.
If there was a way to attach a document, I would send the expense report. If you want to look at it, let me know and I will send it. It's a small xls file.
Thanks.
DT
Hi all, sorry to bother you all, especially if this has already been answered, but I can't seem to find the solution to it. Assuming that what I've been doing has been correct that is.
I have three (3) tables with the following fields (where PK is primary key);
[tbl Ingred]: IngredID (PK), ProdID_fk, CompCode, IngredName, Weight, Symbol, RP01, RP02, RP03, RP04, RP05, RP06, RP07, RP08, RP09, RP10
[tbl Prod]: ProdID (PK), ProdName, FP, BP, SBU, ProdNotes
[tbl RPCalc]: RPs, RPs_long (PK), Sym, Limit, Sym_1, RP_1, Comp_1, Add, RP_01, RPNotes
[tbl Prod] has a one-to-many relationship with [tbl Ingred]; that is, for one ProdID, there can be many IngredIDs. The tables are designed so that the final user-displayed form is 'user-friendly'.
I've made a qry called [qry Qcalc] used to calculate the the Quotation (Q) of each of the 10 RPs (RP01 - RP10). Which simply for the first one is; QRP01: [Weight]/[tbl RPCalc_1].Limit, where the [tbl Ingred].[RP01] is linked to a corresponding [tbl RPCalc], by the [RPs] field. As for one [RPs] there may be multiple [RPs_long]. The way it is set up is so that the [RPs] and [RPs_long] are mapped correctly, to be used for calculations.
However, I am now stuck with a problem. I need to sum up these QRP values ([QRP01] - [QRP10]), based on (at least?) two conditions. The user can enter in their RPs; e.g. R10, R20, R21 in any of the [RP01] to [RP10]'s, and in any order.
What I need is to be able to obtain a sum of the Q values for each [RPs_long] (e.g. R10, R20, R21), rather than being the sum of the fields [RP01] to [RP10]. Also, each [RPs_long] may or may not be able to be summed up, depending on another field [Add] which has a "Yes" or "No". "Yes" is for it being able to be summed up, and "No" for it not being additive.
So the end result would be; for each [ProdID], there will be multiple [IngredID] where each will have up to ten (10) "RPs" (that being the [RP01] to [RP10] fields). These inputted "RPs" are then related to [tbl RPCalc] to be able to obtain the Q-values. If the Q-Value is not greater or equal to 1 (>= 1), then the sum of the Q-values for each [RPs_long], provided that the [Add] field is "Yes", will then be able to determine what are the final output RPs to be used, i.e. for the sum of the Q-values are greater or equal to 1 (>= 1), that [RPs_long] will be used.
I've been stuck on this for quite some time, and I know that if I change the whole table structure (like having a field for each RPs in the [tbl Ingred]), I might be able to make it much easier for myself. However, by doing so, it will not be able to offer as much flexibility in the calculations, and also, may not make it as 'user-friendly'. Another thought was maybe to create another table with just the [CompCodeID] (based on [tbl Ingred].[CompCode]), [Weight], [RP], but I'm not too sure how this will work either, but I might give it a shot if this current method doesn't work.
I hope that this made sense, as it is all quite complex (and confusing) to me. Any help on this matter will be much appreciated. Thanks in advance.
I have a number of fields that hold values (scores - either 0,1 or 2) that need to be summed but in some cases the value is 99 (which is recognised by our stats program as a N/A type of anwer- This occurs when a question is optional and the user hasnt answered it. I did not want to value to be null (since its not like the user didnt answer it because they missed out on it by accident but rather they could not) and it couldnt be 0 either since 0 actually means something different in the context of the questionnaire.Lets say I have Q1 which has a value of 0, Q2 has a value of 1, Q3 has a value of 99 and Q4 has a value of 2I want to get the total of Q1+Q2+Q3+Q4 for a particular entry but if the value of any or all of the questions are 99 I want access to ignore it and just sum the rest of the values i.e. the sum should read 0+1+2+(99)=3 not 102I want to be able to include this sum function in the expression builder if possible since I am using it for a report. Can someone please help?
View 3 Replies View RelatedIn the footer of my report I have a field that sums the Transaction Amounts - =Sum([Transaction Amount])
I would also like to break the totals down further by Transaction Type Codes.
Something like =Sum([Transaction Amount]) where Transaction Type Code = AL-Exp-Paid
I am involved in centrally managing a project , a part of which involves employees of certain companies being given a weekly subsidy for study on academic courses. I have successfully set up a table for all the learners and a related table for companies.
Each learner will receive a fixed weekly rate subsidy in the first year, and a lower fixed weekly rate subsidy in the second year. Somebody (not me) will need to check their paychecks to ensure that employees have been paid and all is above board. The learners/employees can start on the programme at any time. I need a way to track this (total claimed amounts, where they're up to etc).
My theoretical solution, is to have a field for each week a learner is on the programme (52 first year, 52 second), and instead of entering a currency amount in the field, the check-person can enter the date they saw the evidence and are happy with it. I thought then if I create a query that searches any dates that fall within the current claim period (eg >01/01/2015, <=Date()), and multiplies field count that fall within those parameters by first/second year subsidy rate if they're in that table. I think my logic is sound, I am just not sure how to write the query/expression, or if it's possible, or if there is a much simpler way to do it.
[AR&R Hours]+[PTO # of Hours]+[Meeting/Calls # of Hours]+[System Issues # of Hours]+[BAU Training # of Hours]+[Exception Processing Hours]+[AIG Related Activities]+[Admin Work Hours]+[Migration Hours]+[Project Hours]
Need the fastest and easiest way to auto calculate the above in a field on a form. i can get it to calculate in a query but need it to do in the form as well.
I have a sales form. The sales form has many Call, Meetings and Emails linked to each sales record. I want to total all the number of calls, meeting and email records related to the sales record to give a total- Touches.I've created 3 queries;
1 - Counts Calls
2 - Counts Emails
3 - Counts Meetings
These all work fine however when I combine them to attempt to count the results it doesn't produce the correct results.I have a second query as well (no pun intended).
I am trying to sum together a column that has values in Time. The results displays as a decimal. How can I have the result display as a Time i.e. 1:20 (1 hour 20 minutes).
Hi,
I have a main form with one subform (Datasheet view). On the main form, I have an On-Click Event button (“Save and Close”) which sets required fields on both the main form and the subform before saving the record.
Here is the problem:
- I start by entering some data in the main form
- I then tab into the subform and enter data
- I then tab out of the subform back into the main form – this is where the problem begins: When I enter all available data in the subform, including satisfying the required fields, and tab out of the subform back into the main form, the subform seems to initiate an extra new record – so… upon clicking the “Save and Close” event button on the main form, the event looks for the required fields of the blank subform record to be populated (a record that I do not have any data for). I also noticed that this required field notification in the subform can be satisifed by simply populating more fields in a previous subform record???)
I have tried a few things to resolve this and have looked throughout this forum without any luck – hope I didn’t miss something.
Any help would be appreciated. I have attached a very simplified version of my database.
I have a form and subform.The form and subform both access tables that have "required" fields.If I try to tab to the sub form without filling in the required field then I get an error message generated by access (this is what I want). If I try and exit the form without the required field I get an error message as well.
Now it's a different story with the sub form. The sub form contains 1 to many rows. In each row there is a required field. I don't get any error message for not filling in that field. I Know I can 'capture' this in the code but I want access to do it.
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
View 2 Replies View RelatedI have a continuous subform recording the information of various wireless products for an employee embedded in an employee main form. Please see screen shot enclosed.
There is a check box "BYOD/Personal" on the subform. I want to hide a number fields when this check box on independent record is checked. However, if I use the following codes, the changes apply to all records under that employee.
Private Sub BYOD/Personal_AfterUpdate()
If BYOD/Personal.Value = True then
Me.Provider.Enabled = False
Me.XXX.Enabled = False....etc.
Else
Me.Provider.Enabled = True
Me.XXX.Enabled = True....etc.
End If
End Sub
How can I just disable those fields on the subform of a specific record when the BYOD/Personal field for that record is checked?
My subforms are randomly adding blank records and one subform I would like to stay blank repopulates with data, though not necessarily the most recently added record. Both of these seem to happen when I navigate to other main records in the database and then return to this page.Using Access 2013, I have a large form with 10 pages. On one of the pages, I have two subforms. This is set up to gather many-to-one data. The top subform is my data entry form with three fields (two combo and a text) and a command button. The bottom subform is a datasheet displaying the three fields.
The two combo boxes are cascading, and they work great. The text box is there to collect additional info for each selection.
The command button works to
1) save the record,
2) requery both subforms in order to display the new data on the datasheet,
3) clear the combo and text boxes, and 4) set focus back to the initial combo box. It all works!
But then when I leave that main record, the horror begins: blank records (from the "many" table) show up on the datasheet and the data entry fields do not stay blank. I suspect my problem is in the command button. I added this code to the OnClick for the command button:
Code:
Private Sub addMinistryItems_Click()
'save record
If Me.Dirty Then Me.Dirty = False
'requery both subforms
Forms![BCD MAIN 2013]!Child572.Form.Requery
Forms![BCD MAIN 2013]!Ministries1.Form.Requery
[code]....
I forum could someone tell me:
I have an unbound form on that form I want to put three sub forms one on a products table the other on a course start dates table and the link table that joins the other two together. all three are related to each other with Pk/FK links.
When I try to link them it says you cannot link items on an unbound form.
regards in advance
Peter:eek:
i'm going to start this by telling what i am working toward in the end as it is where the problem obviously stems from.
i am trying to create a report which will tell me how many times 'hcapp' is in a table. there are three different fields where 'hcapp' can be placed...i can easily create three different queries which return how many times 'hcapp' is mentioned in one field, but i have yet to figure out how to look through all three fields in one query...is it possible? if not, how can i have a report call all three of these queries and then sum the total?
i've a question that hopefully has a simple answer.
i have a query that returns three different numbers (each in its own column)...anyway, how can i make it sum the number of these three numbers...the best case scenario would be if i could have a fourth column appear in the results of the query with the sum...
it would look something like this
num1 num2 num3 sum
1 2 3 6
hello there...ive a question...i have a summing query which searches for the word "processed" in a specific column of a table...currently if "processed" is not found within the column the query will not return anything...is there a way to have the query return a zero instead?
View 3 Replies View RelatedWhen i'm summing up values in a column like "Hours:[production]+[nonproduction]" how can i have access treat blanks as zeros? I tried
"Hours: IIf([nonproduction]="",0,[nonproduction])+IIf([production]="",0,[production])" and it just gave me a #value error
Can't believe I'm posting this :o Have tried every permutation I can find, including the previous requestes from other members, but it still won't work.
I have a subform on whose footer I've placed a text box to sum a valu, [SubTotal]. On the main form I've set the control source of a text box to the text box on the subform, and it just won't work :mad: Can someone please have a look at this and put me out of my misery?
Thanks, Lol :D
Hello,
I'm trying to sum numbers in a query. The table that Im summing from is set up as follows. The 1st column is just an autonumber. The 2nd column is an individuals. The third column is a date. The fourth column is a transaction (Buy or Sell). The fifth column is an amount (in $). and the 6th column is an Account (RRSP or RESP).
I would like to sum all the buys for each individual for each account. However I'm finding this difficult to do. Here is what i have so far. It sums all the 'buys' for the entire table.
SELECT Transactions.[Customer ID], DSum("Amount","Transactions","Transactions.Transaction=1") AS Expr1, Accounts.[Account Type ID]
FROM Transactions INNER JOIN Accounts ON Transactions.[Account ID] = Accounts.[Account ID];
Thanks very much,
C