Problem With Totals In Report
Jun 24, 2005
Dear All:
Code:
=DCount("[Transcript type]","[TRANSCRIPTS]","[Transcript type]='Official Copy'")
The "Transcript type" is from a combo box where the choices are "Official Copy" and "Student copy".
The above is what I am using in a textbox in a report to return the total of "Official Copies" and Student copies" requested.
This report is based on a query where I have "Between [Start Date] And [End Date]". I can select the dates to give a total for a specified month.
Unfortunately, the report returns ALL totals of the "Official Copies" and ALL totals of the "Student copies" for records in the database and NOT the total for the requested dates.
Does anyone know how to fix this?
Any help is most grateful.
Regards,
Dion
View Replies
ADVERTISEMENT
Apr 10, 2014
I've done this once entirely by accident and can't seem to duplicate it...
I have a report. It has the following:
Report Header: Logo and title
Department Header
Supervisor Header
Group Header
Detail
Department Footer: Totals
Report Footer: Overall Totals for all departments
Here's my question.
I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?
View 4 Replies
View Related
Jul 12, 2005
this is going to be kind of hard to explain...but here goes:
i have some values grouped in a header on a report. I need to be able to get totals for these values within the group... here is what i tried:
i created a new textbox, set the control source to equal the textbox i want to total up, and then set the running sum of the new textbox to "over group". this gives me the right result, however I only want the new textbox to be visible at the end of the group. so now what i essentially have is a textbox that keeps a running sum of another textbox...
how can i make the textbox only visible at the end of the group? i tried the "on retreat" event for the group so that it will make the textbox visible at the end of the group, but it didn't do anything. i'm not sure what "on retreat" does, but i guess it's not for that.
anyone have any clue as to how this can be done??
just to clarify, this is pretty much how i want it to be set up
0 <---repeating textboxes
1 <---
5 <---
8 <---
6 <---
1 <---
3 <---
-
24 <---new textbox for total
thanks in advance for your help
*j
View 3 Replies
View Related
Mar 16, 2008
I have a report that sum's up three colums:
=Sum[Totalhours] (text60)
=Sum[HolidayHours] (text61)
=Sum[SickHours] (text62)
the text60 etc are the name of the field with the sum function in.
I have these placed in the work date footer and they total up the colums ok.
What I need to do it add the Total Hours + Holiday hours + Sick Hours in the report footer to give me a total hours to pay then I will need to multiply this value by a Pay Rate.
I have tried:
=[text60]+[text61]+[text62]
=Sum[text60]+[text61]+[text62]
=Sum([text60]+[text61]+[text62])
=Sum[TotalHours]+[HolidayHours]+[SickHours]
=Sum([TotalHours]+[HolidayHours]+[SickHours])
Any help would be great as I am stuck on this one.
View 12 Replies
View Related
Apr 1, 2008
I am trying to add hours entered in a short time format. For example 08:15 or 02:55. I also would like it to give a total number of hours beyond 23:00. Here is a table with a Name Column and Hours Column
NameHours
BETTER,HEATHER8:00
BETTER,HEATHER8:00
BETTER,HEATHER5:41
BETTER,HEATHER2:35
BETTER,HEATHER1:15
WILLIAMS,R2:30
WILLIAMS,R0:45
WILLIAMS,R11:20
WILLIAMS,R8:25
WILLIAMS,R8:15
WILLIAMS,R10:20
How do I
A) write a query to add up the hours. I believe Heather would total 25:31 Hours.
B) Show this same total in a report?
View 2 Replies
View Related
Dec 17, 2006
I have a field which is a tickbox - yes, no response.
In a report i want a total of the fields that are yes.
How do i do this?
I have tried things like = Count([Matrix is true]) but this just gives me an error.
Also is there a way (once again in a report) to find the total of all the fields that have the first three letters being MAT...?
View 2 Replies
View Related
Jun 21, 2007
I have a report that shows property address in the address header. Then lists in the details all work done at that property.
I need to total the number of properties we have worked on. The problem I am getting is if we do two jobs at one property then the total property worked on number is increased by the extra job done at that property.
I am using the following in a text box on the report footer: =Count([houseno] & " " & [streetname])
Hope someone can give me a clue where I am going wrong.
Thanks,
View 2 Replies
View Related
Jun 7, 2005
I have a form with 2 buttons on it, I'll call them button 1 and button 2. When I click on button 1 it calls a class that will go through and calculate some totals and then write them back to a table, all access to the table is managed through ADO. Then I can go over to button 2 and pull up a report displaying the totals. Although when I click on button 2 the report will be about half empty, only displaying 0's in most cases. If I close the report and open it again using button 2 all the data will be populated. What is going on here???
Thank you for any help
View 9 Replies
View Related
Sep 13, 2006
Hi there.
I have a report which has multiple pages with multiple running totals. It is an invoice style report producing an invoice run for all customers at once. The invoice detail lines are a subreport for each customer. Every time a customer changes a new invoice page is produced (grouped by customer). If there are no invoice detail lines for any one customer a total is still displayed using the IIF command to avoid #Error totals. A running GRAND total of ALL the invoice totals is displayed as a report footer. The problem I have is when I generate the preview report and flick to the last page to see the grand total it is there no problems. However, when I print it I get a different amount!!! If I then start leafing back through the invoices on-screen - say 20 - 30 customers - then go to the end again the grand total changes again! I know the grand total shown initially, when going straight to the end is correct as I have checked it with queries. The report is 630 pages long. Any ideas as this is driving me nuts! (I assume it has something to do with using the IIF statement or perhaps the subreports?)
View 1 Replies
View Related
Jun 24, 2005
Dear All:
I am totally clueless on this one. Here is the statement I am using in a textbox in a report:
=DCount("[Transcript_type]","[Diplomas_requested_per_month]","[Transcript_type]='Official copy'")
This report is based on a query. The query is called "Diplomas_requested_per_month". The fields in the query are: "Transcript_type" and "Request_date". In this query there is Between [Start Date] And [End Date].
I am attempted to count the number of "Official Copy" for a specified month.
I am propted to input the start date and ending date, it works great when I run the query. But in the report, I get a "#error".
I am thankful for who have responded to the previous posting of this issue, but I am completely lost.
Any help is greatly appreciated.
Regards,
Dion
View 3 Replies
View Related
May 8, 2013
I have a table with:
Invoice Number | Customer Name | Item | Item Cost | Invoice Date | Paid | Date Paid
Example of data:
AK001 | A Brown | Blue Car |1000 | 1/4/2013 | Yes | 20/4/2013
AK001 | A Brown | Red Car |2000 | 1/4/2013 | Yes | 20/4/2013
AK001 | A Brown | Yellow Car |500 | 1/4/2013 | Yes | 20/4/2013
AK002 | A Brown | Black Car |1000 | 7/4/2013 | Yes | 20/4/2013
AK003 | B Smith | Blue Car |1000 | 12/4/2013 | Yes | 25/4/2013
I want to create a report from this table that outputs as:
Invoice Number | Customer Name | Total Price | Invoice Date | Paid | Date Paid
Example of report from Example Data:
AK001 | A Brown |3500 | 1/4/2013 | Yes | 20/4/2013
AK002 | A Brown |1000 | 7/4/2013 | Yes | 20/4/2013
AK003 | B Smith |1000 | 12/4/2013 | Yes | 25/4/2013
Is there an easy way to do this.. or will I need to make a new linked table with the invoice number as a lookup?
View 2 Replies
View Related
Aug 29, 2005
I have monthly reports developed from various query's and what I want to do is have a single report that I can display my monthly totals from each monthly report without developing a whole new report. I want to use the existing totals from the monthlies and have them all on one report. Can anyone help me?
Jaxfire
View 8 Replies
View Related
Jul 30, 2015
I am trying to get my totals from my subreports, and dividing the number by 2 or 4, and put the new number on the main report.
for Operator/Trainer Productivity, I used:
=([rptEmployEvaluationOperator subreport].[Report]![OPTotal]+[rptEmployEvaluationOperatorTrainer subreport].[Report]![OPTotal])/2
for Auditor/Trainer Productivity, I used:
=([rptEmployEvaluationAuditor1 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor2 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor3 subreport].[Report]![OPTotal]+[EmployEvaluationAuditorTrainer subreport].[Report]![OPTotal])/4
These both work if there are values in all totals subreports. When one of them might not have a total, I get an error message.
I tried to use :
=IIf([Orders].[Report].[HasData], [Orders].[Report].[txtOrderValue], 0)
=IIf([Orders].[Report].[HasData], Nz([Orders].[Report].[txtOrderValue], 0), 0)
=iif([rptEmployEvaluationOperator subreport].[Report].[HasData],([rptEmployEvaluationOperator subreport].[Report].[OPTotal]+=iif([rptEmployEvaluationOperatorTrainer subreport].[Report].[HasData],[rptEmployEvaluationOperatorTrainer subreport].[Report].[OPTotal])/2
and the same idea for the second one. I tried both methods and did not work. I am not sure what I am missing.
View 10 Replies
View Related
Jun 1, 2013
I've got a simple invoice database with 10 amount fields, that needs to be summed up intoa Total including Gst box on a monthly report.
Report only has Date, Invoice Number And Total Amount fields on it, so I need to pull the information from table and sum it into Total Amount.
ie. = sum ( t1 +t2 + t3 + t4 + t5 + t6 + t7 + t8 + t9 + t10)
and sum above divided by 10% then added together to form total.
I'm just not sure how to do it, everything I've tried so far ain't worked.
Every example I've looked at is only doing maths with 1 field.
View 4 Replies
View Related
Sep 11, 2014
I have some columns with hours. I want to simply display the total below each column. I would like to do this in the query results and in the reports that I create.
View 1 Replies
View Related
Mar 13, 2013
I have an excel report which I would like to run through Access to drive trend analysis and compare with other similar reports. The excel report has a cumulative spend figure each week and not the actual weekly spend numbers, the budget figure also can change depending on the actuals.
Excel report:
Week 1
Product ID
Customer
Yearly Budget
Spend
1122
Sam
100
3
1123
John
200
4
[code]...
Will I need to create a new table each week or can I link the file and it updates automatically?Can Access store the weekly data and just update it one week at a time?
View 3 Replies
View Related
Dec 10, 2014
I have a Report that has calculated fields in the details section. I want to total those fields in the Report Footer. When I run the report I am prompted to enter the value for the calculated fields and the Totals do not appear. Access must be inspecting the report before it actually runs. And so, since the calculated fields do not exist until the report is run then Access doesnt find them during the inspection and hence prompts for input.
View 2 Replies
View Related
May 28, 2015
I have a main report with 5 sub reports. There is a detail page for each company and a totals page at the end. The record source for each sub report is a Union query (combines the detailed information with the total information.
One of the sub reports displays currency amounts. The detailed reports display the currency correctly: $26,001 (no cents). The totals sub report does not display the currency formatting: 468934
When I run just the totals query the amounts display correctly ($468,934) by using the CCUR(TotalAmount) variable type conversion. The VarType for the amount field in the totals query is 5 (double precision).
When I combine the detail query and totals query into a Union query the detail amounts display correctly but the total amount is missing the formatting.
Here is the union query.
SELECT TblCompany.TblCompanykey, FormatCurrency(ProviderCostsRetrieval([TblCompanykey],1),0) AS TotalCost
FROM TblCompany
ORDER BY TblCompany.TblCompanykey
UNION ALL SELECT 9999 AS TblCompanykey, CCur(Sum(([QryRptProviderCostsDuringPeriod.TotalCost]))) AS TotalCost
FROM QryRptProviderCostsDuringPeriod
GROUP BY 9999;
View 2 Replies
View Related
Sep 4, 2007
Hey all! This is my first post. Been searching through the net all day trying to find a solution to this problem. Basically i have a table that looks like this (regular text is what i have and bolded text is what I need:Name Date Qty MOBrad 12/12/2007 23323 4423John 12/11/2007 3445 4432 John 12/11/2007 344 4432 John 12/11/2007 45 4432 John 12/11/2007 44 4432 John 12/11/2007 3445 4432 Grand Total: (Qty)And then I'd like to be able to carry this over and display a grand total at the bottom of every page of a report that I would need to generate. Our company produces forms and we sometimes have 60 - 70 people working on a single job. We want to see their hours individually but we would also like to see a grand sum of all their hours. If someone could help with this or needs more info let me know. Thanks for all your help!
View 14 Replies
View Related
Dec 28, 2014
I am trying to create a P&L statement in access. I know what I want to come out at the end. I am just starting to play with access and having trouble getting what I want to come out of it.
On the sales side I have a query that gathers all the revenue sources and calculates a total for each date. I then use a second query to just take out the data I want for the P&L report. I created a sub-report that displays the data I want. I use the grouping and grand total features to get the total into the report footer. So far so good.
On the expense side I created a form of a query to manage the one to many relationship to capture the data for expenses (one purchase with many line items). I created a query based of this query to get the relevant data for my expense sub-report. I created the sub-report and got everything looking and calculating the way I want it to. I use the same grouping and grand total features to display the data in the report footer. Still good.
I created a new main parent report with the two sub-reports (sales & expenses) on it and even was able to pull the totals from the sub-reports into the main (so currently the subtotals of the two sub-reports are displayed twice). Now when I try to use the textboxes I used to pull the sub-report totals into the main report to perform additional calculations (sales - expenses) I get #error. I have tried different things and gotten ?name.
Control source for the two textbox controls on the main that display correctly, but don't let me do any further calculations.
=[rptP&LExpensesOverview]![AccessTotalsAmount]
=[rptP&LSalesOverview]![AccessTotalsTotal Sales]
To do the subtraction I have tried using the references above, as well as just using the names of the unbound text boxes in the report that bring the totals into the main report.
As a work around, I tried to build one query with all the data from sales and expenses, but can't "filter" based on date and get the data I want in the query results because the two sets of data are not necessarily related. I either get a long list of records, or no records (I am currently only playing with about 5 days of data).
View 2 Replies
View Related
Feb 18, 2015
Is there a way to have say five different reports that give out information and at the bottom the totals. I would like to take each of those separate reports to create one report with just the totals.
View 3 Replies
View Related
Jul 27, 2007
Hi there, I am fairly new to access and am having trouble doing what I need to do. I have a table that contains 2 number fields, 14 yes/no fields, and one text field. I want to be able to display the total number of yes's per field, and the total count of each individual value for the number and text fields.
I was able to make individual queries that count all of these, however I'm unsure how I can make a query that will do it all together, or how to put them all together.
I may be doing this wrong, or there may be a better way of doing this.
Any help would be greatly appreciated!
Thanks very much!
View 10 Replies
View Related
Nov 10, 2006
is there a way that i can get a total from a number on a form and a number on a sub-form (I want to add the numbers from the form and sub-form and have the total appear in a text box on the form)
View 3 Replies
View Related
Mar 7, 2007
i want a field to total up the amount of times a person apears in another table. does it involve using the greek version of E?
View 2 Replies
View Related
Jun 28, 2005
I am designing a new database for our life and disability department and they have several different policies where the base life insurance reduces at certain ages.
Please take a look at the scenarios listed below and give me any suggestions and tips on the best way to get this done. If you have any.
Below are the 12 scenarios:
1.) Reduces 75% at Age 70
2.) Age 65 to 70 the life amount is $9,000 and Age 70 and over the life amount is $6,000
3.) Reduces at age 65 by 92%, age 66 by 84.64%, age 67 by 77.869%, age 68 by 71.639%, age 69 by 65.908% and age 70 and over by 40%.
4.) On the day following the 70th birthday, the life amount will reduce to 70%. On the day following the 75th birthday the life amount will reduce to 40% of the 70th birthday reduced amount.
5.) On the Policy Anniversary Date following the 70th birthday - reduces 50%
6.) On the Premium Due Date following the 70th birthday, the life amount will reduce to 70%. On the Premium Due Date following the 75th birthday, life amount will reduce to 40% of the amount of the 70th birthday reduced amt.
7.) Age 65 life amount reduces to 65%. Age 70 life amount reduces to 35%. Age 75 life amount reduces to 25%.
8.) Terminates on the first of the month following the 65th birthday.
9.) Terminates Age 70
10.) Terminates on date of retirement or 1st or month following 70th birthday
11.) Terminates Age 65
12.) Never Reduces
Thanks for your time, Brian
View 2 Replies
View Related
Aug 8, 2005
Hi,
I'm trying to get a total which runs off of a query in a listbox (disguised as a textbox) to always show 1 decimal place. Right now, it'll show one decimal place only if the number is rational. If the number is whole, it doesn't show any.
E.g. For 8.5, it'll show 8.5
For 8, it'll show 8, not 8.0
I want it to show 8.0
Any help would be much appreciated.
View 5 Replies
View Related
