Problems After Access 2007 Install

Sep 21, 2007

In have a db that was created with Access 2003. I recently installed Access 2007 and kept the old version as well. However, when I try to work with the db in Access 2003, I am getting all kinds of errors. When I run the same db in a machine installed only with Access 2003, it runs fine. I am thinking that it might be the reference library. Can anyone help. If it is the reference library, how can I revert back to the old reference library.

View Replies


ADVERTISEMENT

Can't Install Or Run Access 97 On Win XP SP2

May 18, 2007

I have a genuine Microsoft CDs and keys, one with Office 97 Small Business Edition, and the other with Access 97 (these are both the full version, NOT upgrades). As I got new machines over the years (both Windows 98 and Windows XP SP 2), I installed the software from both CDs without incident a number of times on on each of those machines. I now have a new Lenovo T60 laptop (again with Win XP SP 2, 1 GB of RAM, and over 100 GB of free disk space).

Word, Excel and Outlook from the Office 97 SBE CD installed normally and run normally, except that I had to rename two Registry keys to get past an error message during installation saying that htmlmarq.ocx could not register itself (see http://forum.theispguide.com/isp-ftopic2753.html). When I went to install Access on the new machine, it kept prompting me to either point it to the folder where the "qualifiying product" was installed, or to insert that product's CD, before it would let me proceed with the "upgrade" - all this despite the fact that this is definitely a full product CD, and NOT an upgrade version. I went round and round with this a number of times, and eventually got past this series of screens (I don't remember how I did it, I was just so relieved to have circumvented the problem).

The balance of the installation appeared to complete normally. However, when I try to launch Access, I get an out of memory error, even immediately after a re-boot and with no other applications running. Does anyone have any ideas about how to resolve this?

View 2 Replies View Related

Unstable Access Install

Oct 23, 2006

Recently I copied a database to another machine at a client. First problem, the open report command canceled, then thining I had a code problem I tried to open the report from the menu. It will not open or allow me to go into design mode, althouh forms and queries will NO reports will allow this. The when I try to open the forms in design mode they crap out with a msacces.exe aborted mesage.

This database works on 53 other macines so it has to be something paculiar to this particular machine. I have tried a complete unisnstall and install twice to no avail.

Version: Access 2003 sp1

View 2 Replies View Related

Help! Can't Install Access On Multiple PCs

Aug 2, 2007

I'm setting up a DB for my wife's machine shop. She has Windows 2000 (for accounting purposes) and her assistant has XP. I have 2000 at home so I installed Access 2003 on my computer, created the database, table, query, macro, and switchboard, and it works great.
Problem? Apparently, I cannot use the same product key more than twice.
I installed it on my wife's machine, but couldn't activate it on her assistant's machine.Microsoft says this is in the end user license agreement, and I'll have to take their word for it cuz I didn't read it.

My question: Is there some sort of workaround for this? If I deactivate it/uninstall it on my machine will that help? I don't need it now that the db is set up anyway.
I just need to get it activated on the 3rd (assistant's) machine ASAP.

View 9 Replies View Related

Access 2K Runtime Install Problem!

Sep 11, 2005

Hello to everyone.

I am reading this forum for a while now and I learned here almost everything I know. But, now i am having problem and I really don't know how to solve it. I am trying to test some little program which I made fo my company. It is Access 2000 database and I made it with Access 2003. Everything is working 100% in Access 2003. BUT, problem is that this database will be run on several mashines in two of our companies and in that other company they have a lot of computers with Win98 installed. I have Access 2003 Developer and I managed to make deployment for computers in my resident company, but, as you probably know, Access 2003 is not working on Win98 computers.

So, I tried to install Access 2000 Runtime on those computers and I am still trying because stupid installation won't finish! It just stops when it comes almost to the end of instalation and nothing happens. I tried to wait for some time but instalation is dead. I also tried to make clean instalation of Win98, but nothing changed. There is no Access on those computers of any kind.


I tried to search forum for solution, but I didn't find it.

Please, help me!

Gile2004
Access 2003

View 2 Replies View Related

Can You Install To Versions Of Access: 97 And 2003

Sep 18, 2005

Hello,
Is it possible to install two versions of MS Access on the same O.S. I already have Access97 installed. Now I want to install access 2003 without it up removing my previous access 97. If it removes/upgardes access 97 to access 2003 I will not be able to open my access 97 database.
Is this possible? and if so how?

Thanks--any help will be much appreciated.

View 6 Replies View Related

Install Uninstall Access Application..

Mar 31, 2006

Hi all..

I am not even sure if it will be possible.

I use Access 2003 and Access developer extensions for packaging the software(operating system is Windows 2000)..everytime I upgrade my software, the users need to uninstall it from their computer and then install my new version..
Is it possible to automate this process so that users click a button on the application and uninstall and install is taken care?

I know I can run a batch file using shell command...but can I create a bat file to uninstall and install? Now, users goto add/remove programs and remove their current version before they install new version.

Thanks

View 6 Replies View Related

Can You Install To Versions Of Access: 97 And 2003

Sep 18, 2005

Hello,
Is it possible to install two versions of MS Access on the same O.S. I already have Access97 installed. Now I want to install access 2003 without it up removing my previous access 97. If it removes/upgardes access 97 to access 2003 I will not be able to open my access 97 database.
Is this possible? and if so how?

Thanks--any help will be much appreciated.

View 1 Replies View Related

Access 2003 Install Issue On WinXP Pro

Aug 14, 2007

Environment WInXP Pro SP1, MS Access 2003, existing access project that fires on another PC with similar setup.

Just installed MS Access 2003 to my own PC. When I try and open an existing project am being informed I need to upgrade jet 4.0 to service pack 8. When I try and install jet SP8 windows is telling me I already have a later version :confused:

And howdy everyone.

View 2 Replies View Related

WindowsNT 4.0 Service Pack 6 Error In Access Runtime Install

Aug 28, 2005

WindowsNT 4.0 Service Pack 6 error in access runtime install
I have an access runtime install package that has worked numerous times
installing on XP Home. It was built using Office XP developer's packaging
wizard.

I tried installing it on a brand new PC running XP Home but it generates the
error:
Visual Basic 6.0 Setup Toolkit
The office system pack cannot be installed on this system because it
requires Windows NT 4.0 Service Pack 6 or later.

I cannot find any info on this - any ideas?

View 2 Replies View Related

Access 2002 Runtime Install Asking For Windows NT SP6 Installing On Vista RC2 5840

Dec 28, 2006

Hi everyone.

Have been testing installation of Office XP Developer Access 2002 runtime package created using the package wizard on a WinXP Pro SP2 machine, for installation on a Vista RC2 5840 machine.

After installing the latest necessary updates such as Office XP Developer SP1 among others which were essential to remove the Path/File error I had, A new error displayed itself as soon as the runtime install package launched.

-------------------------------------------------------------------
Visual Basic 6.0 Setup Toolkit (Error Window Title Bar)

The Office System Pack cannot be installed on this system because it requires Windows NT Service Pack 6 or later.
-------------------------------------------------------------------

I assume Windows NT SP6 has no relevance to Vista ???

Maybe some other update will help here. I have googled for hours to no avail.

Any help greatly appreciated.

Thank you and best wishes for 2007.

Joe.

View 14 Replies View Related

Can Run Access Project Without Install Access

Dec 14, 2013

I create a project in access. and i want that everybody can use in my project.

how i can do that?

View 4 Replies View Related

Access 2007 Crashes On Excel 2007 Import

Mar 21, 2008

On trying to import an Excel 2007 file into Access 2007 I get the following:

1) Choose "External Data," Import, Exce
2) Select small file in MS Excel 2007 format.
3) Click on Import the source data into a new table ...
4) Choose OK

Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.

Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.

Event Viewer gives following message, which is of no help:
"ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."

Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.

I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.

I have turned off DEP.

How can I get MS Access 2007 to import Excel?

Thanks

Ken

View 6 Replies View Related

Access 2007 Runtime Not Visible In Access 2007

Nov 26, 2007

I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features.
Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing!
Help!
I do have Runtime 2002 (XP) on the same PC, is that relevant?

View 10 Replies View Related

Where Do I Install Msowcf.dll?

Feb 21, 2006

I have a text box on a form with the Control Source set to: =Pi() It's giving me a #Name? error, as is Control Source: =Radians(34) Seeing this note in the help file related to Pi() ...
Some functions display the error #NAME? instead of a value.
Some of the spreadsheet functions are provided through a separate dynamic link library file, Msowcf.dll. If this file is missing, the functions display the #NAME? error value when you open the spreadsheet in your browser. Search for Msowcf.dll on your computer, and if it's missing, either reinstall Microsoft Office 2000 or contact your system administrator.I searched my computer for Msowcf.dll and found it installed in:
C:Program FilesMicrosoft Access RuntimOffice10
C:Program FilesMicrosoft OfficeOffice
C:Program FilesMicrosoft OfficeOffice10

I'm using Office 2000 on this computer (Front Page 2002).

View 3 Replies View Related

Can Office Access 2003 Runtime-Based Solutions Applies To Access 2007?

Jan 29, 2007

Hello,

I have installed Microsoft Access 2003 and Microsoft Access 2003 Developer Extensions. I can create Access application by using the Package Wizard.
But after I upgrade from Microsoft Access 2003 to Microsoft Access 2007.
I can't use the Package Wizard.

How can I do to solve this?

Thanks.

View 1 Replies View Related

Multiple Version Install

Sep 27, 2005

I know its possible to have 2 different versions of Access installed, and that you have to uninstall then start in with the earliest version. BUT can I have 3 different versions? I think it should be no problem but thought I would ask first.
I am looking at 97, 2000, and 2003. Plan is to do just Access 97, 2000, and then the full office install of 2003.

View 7 Replies View Related

Auto Install Front End

Mar 28, 2007

Hi

I have created a split db for my father and his little business. Sometimes he asks me to make changes. I want to be able to email him the new front end, and when clicked, the file will install the new front end to the correct location along with any folders containing updated informatio (Images, Tables, etc)

how can i do this ?

regards

Mclaren

View 4 Replies View Related

Table Problems Moving From Access 2003 -> Access 2007

Jun 19, 2007

Attached is a screenshot of the relationships in a database I built a couple of years ago. It's worked absolutely fine in Access 2003 and currently has over 18,000 customers with associated information in it.

However, when I open the database in Access 2007 the performance is awful. All the forms are very slow to respond when tabbing between form elements. I've experimented by reducing the number of form elements calling on related data on a given page and whilst this improves performance it reduces usability - something I don't want to compromise on especially since Access 2007 should be able to cope with this.

My next question is therefore whether I've got the most efficient underlying table design and I can't see any other way of doing it than my current method so I'd be grateful for any feedback or advice anyone has.

View 2 Replies View Related

Can Programmer Install A Database Expiration

Nov 27, 2006

I had some work done on my Database a few weeks ago and it works great.

I just got an email from the guy who did the work and he wants me to pay him more money....he said he forgot to bill me for 6 hours.

I told him I didn't think that was fair and wasn't really willing to pay for more hours....he then said he never sent the "non-expiry" versions of the databases.....he also said I have 15 days left until they expire.

Considering I done additional work on them I was wondering if this is possible?

Bruce

P.S. I hate being taken advantage of.....he was really good to work with but now he's trying to rob me.

View 8 Replies View Related

Pie Charts - Keeps Asking To Install Microsoft Graph!

Mar 4, 2005

Hello,

I recently started using the Chart feature in access. Everytime the form with the graph loads up windows installer pops up and asks me to install. Since i let it install like 3 times, i click cancel and it still works fine. Anyone else have a problem like this? How can i prevent it from installing everything, since its already installed?


Matt

View 1 Replies View Related

Access 2003 To Access 2007 Split Database

Mar 8, 2007

Hi All,

Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).

Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.

I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.

View 4 Replies View Related

Problem Running Access 2007 And Access 2002

Mar 27, 2007

Having a problem here after installing 2007. All my previously created databases work fine in 2007 (after clicking the enable, which is a pain,but don't know any other way) When I return to 2002 and try to open the databases I get different errors all something like this on....... "The expression On Open you entered as the event property setting produced the following error: Object or class does not support the set of events. Whats up here?????I have found a site here...http://allenbrowne.com/bug-17.htmlMentions this problem,but refers to Vista..... Does the same apply to XP? And which is the best fix?

View 7 Replies View Related

Access 2003 Database Not Functioning In Access 2007

Mar 30, 2007

Hi

I have an Access 2000/2003 database which opens up and displays correctly in Access 2007, but when I go to use the File>Print command, or for that matter any of the other pull down menu's nothing happens?

Has anyone else experienced thisproblem, or does anyone know what I am doing wrong?

Any help greatly appreciated.

Thanks

Steve

View 1 Replies View Related

Access 2007 And Access Developer Extension

Nov 29, 2006

Hello friends.

Do you know anything about a new Developer Extension for Access 2007 ?

Thank :) :)

View 1 Replies View Related

Access 2007 To Access 2000 Problem

Dec 17, 2007

I have created a database in Access 2007 that now works well, and one that I'm quite proud off. However, I can easily convert it to an Access 2000 format as can anyone else here, but when I load it up there is a major problem.

I have used the tab control in my main form and that has three tabs on it. However, it's positioned correctly in Access 2007 it's not positioned correctly in Access 2000 as I have to move the tab control down a bit, but that would seem fine. So I lowered the tab control form and changed my form layout slightly, but even then the tab control over all over the Access 2000 form whenever I interact with the tabs - most bizzare.

Any help? Thanks.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved