Problems Getting The Currency Sign To Display Using The Nz
Nov 15, 2006
Hi,
I have a problem displaying the £ sign in my query. Instead of the query displaying £448.87 it displays 448.87.
You can see from the below image that the value of AllCost is £448.87 and I don't understand why its displaying 448.87 when I run the other query called All Cost 2. The Nz function is used to display £0.00 if the AllCost field is null.
http://img01.picoodle.com/img/img01/6/11/15/f_82932abff5f8.jpg
The below image is when I run the "All Cost 2" query
http://img01.picoodle.com/img/img01/6/11/15/f_489aad3dce48.jpg
Thanks!
Chris
View Replies
ADVERTISEMENT
Jan 16, 2014
I have several reports where the currency was always reported in dollars so for the fields in question I had a format of $#,###.00 which printed the dollar sign in front of the amount.
As the system has now become more sophisticated I need to print out a currency symbol depending upon the client. I have a currency table that links into the client so my query 'behind' the report holds the right symbol but how do I get it ito the report. I Know I can define a second field that will hold the symbol but to me this is a clumsy way of doing it. Is there anyway I can put the symbol in the control source for the data or into the format of the field or some other way?
View 10 Replies
View Related
Jan 27, 2015
I have created a button to display the current time ( sign in and out).
It works fine with this code Me.field = time$
However i need a code beneath it to run the actual query that will display this time onto the table...
I have attached an image of one of the query, I need it to run.
View 5 Replies
View Related
Jan 8, 2015
My teacher instructs me to make a 'multiple item form' in regards to signing in and signing out of a dentist ( my scenario)...The fields i have are : Appointment ID, dentistID, Appointment time, Appointment Date and customerID..i have created have the multiple item form and i am now displayed with the fields.
View 6 Replies
View Related
Apr 1, 2008
I have a field that adds up hours and minutes from a number of fields control source set to:
=HoursAndMinutes(([PaidHours]+[HolidayHours]+[OverTime])*[Pay]/100)
Where the Pay field contains the rate of pay in pence.
This then displays the value in the following format 15:00 what I would like to do is have this value displayed as Currency it makes no difference if I set the format to Currency is there a was to have it displayed as currency ie,
£15.00 any help would be appreciated.
View 3 Replies
View Related
May 22, 2006
Hi,
I have a query with 3 fields - PaymentAmount and PaymentTotal. The third field is a percentage of the two e.g:
PaymentAmount = 10000
PaymentTotal = 12000
PaymentPercentage = 83.333333333333
In my form I would like a text box to display the two combined i.e. £10.000.00 (83.33%).
At the moment it displays 10000 83.3333333333333. I can use £#,##0.00 to format the current half, but how can I then format the percentage to display 83.33%?
Thanks
View 1 Replies
View Related
May 28, 2015
I have a main report with 5 sub reports. There is a detail page for each company and a totals page at the end. The record source for each sub report is a Union query (combines the detailed information with the total information.
One of the sub reports displays currency amounts. The detailed reports display the currency correctly: $26,001 (no cents). The totals sub report does not display the currency formatting: 468934
When I run just the totals query the amounts display correctly ($468,934) by using the CCUR(TotalAmount) variable type conversion. The VarType for the amount field in the totals query is 5 (double precision).
When I combine the detail query and totals query into a Union query the detail amounts display correctly but the total amount is missing the formatting.
Here is the union query.
SELECT TblCompany.TblCompanykey, FormatCurrency(ProviderCostsRetrieval([TblCompanykey],1),0) AS TotalCost
FROM TblCompany
ORDER BY TblCompany.TblCompanykey
UNION ALL SELECT 9999 AS TblCompanykey, CCur(Sum(([QryRptProviderCostsDuringPeriod.TotalCost]))) AS TotalCost
FROM QryRptProviderCostsDuringPeriod
GROUP BY 9999;
View 2 Replies
View Related
Dec 20, 2012
how to change default currency in Access 2013 to a "foreign currency" (i.e. to Indonesia Rupiahs) without changing control panel (Region/Language>currency) - now setup as USA ($US)?
View 3 Replies
View Related
Oct 6, 2005
Can anyone tell me if the % sign can be used, and if it cant is there any other way around this?
View 6 Replies
View Related
Aug 23, 2006
Hi I would like to know if it is possible to display the & sign. I need to beable to use this both in form titles and on command buttons. When ik type it in as a caption it is displayed but as soon as I come out of edit mode I am left with a _ in place of the &
any help would be great. Thanks Paul Evans
View 2 Replies
View Related
Jan 8, 2007
I have the following in a select query
TimeLeft: CDate([FinishingTime]-Time())
If FinishingTime is LESS than Time() I want it to show a negative sign to show that the time has past. How do I do this?
View 3 Replies
View Related
Jan 10, 2005
Hey all,
just have a small question...
Normally in a form if you use the '&' in front of a objectname or something like that it will underline the first following letter meaning you can use the 'ALT + letter' combination to use it.
Now I want to use the '&' sign in a label, without having it do anything like that. I just want it to display the sign, anyone have any ideas on how to do this?
Cheers,
Thomas
View 3 Replies
View Related
Oct 14, 2013
I have table with one of the columns with number (amount) that can be positive or negative.
I want to add new column of sign - 'H' for positive or 'S' for negative.
View 1 Replies
View Related
Sep 11, 2012
I have a table that is joined to two tables. When I view it in Access 2010 the plus sign is set to one table. How can I make it view the other relationship?
View 1 Replies
View Related
Oct 19, 2014
I want to create a user name and password in to access my data base
View 3 Replies
View Related
Mar 23, 2005
Is there a way to reverse the sign of a numerical field at data entry time and store the negative results...i.e. a quantity field (shipments) keyed as +100 to be stored as -100? I have tried several input mask solutions but none worked.
Thanks for any help or suggestions from an Access novice.
View 7 Replies
View Related
Jan 29, 2014
I have an accdb built using Access 2013 that will run with in 2010 Runtime. I am about ready to distribute the application, and am starting to do some research.
When I attempt to package and sign the db using the feature in Access 2013 it asks for me to "Confirm Certificate".
Before I go buy one I want to 1) try to create on myself and 2) learn about some good places to buy them.
1) I created a "Self-Signed" certificate using IIS, but the certificate doesn't show up on the list of certs when I attempt to package and sign the accdb. Is there a way to use a "Self-Signed" certificate to package my accdb?
2) If purchasing a SSL is the only option. Where is the best place to buy a SSL that I can use to package and sign accdbs from Access 2013?
View 3 Replies
View Related
Apr 7, 2014
I am trying to add a percentage sign (%) after a number I get from a table, thus the number 1,5 should display 1,5% and NOT 150%.
I am using the Format Property of the text field.
I tried #,##% which converted the value to a percentage (1,5 became 150%) Then I tried #,##"%" and #,##\% Access ignored both and changed the value in the property field to #,##% Using the Format function is not an option because it is a bound field which should be editable.
View 3 Replies
View Related
Nov 23, 2006
hi.. i have one table with fields 1-8
2 forms are used to fill in the details for each record using the primary key on each form.
eg
FORM1
jobid
date
day
time
price
FORM2
jobid
pickup
dropoff
vehicle
is there a way that on FORM1, i can indicate to my user whether or not any details have been entered into FORM2
maybe a colour system.. eg
if table.pickup and table.dropoff and table.vehicle are empty
form indicator on FORM1 is red (to show that none of the details on FORM2 have been entered)
else if table.pickup or table.dropoff or table.vehicle are not empty
form indicator on FORM1 is green (to show that atleast one of the fields on FORM2 has been entered)
it doesnt have to be a colour scheme, it can be wording.. eg
Form2 Empty, or Form2 Completed...
just some kind of sign to my user..
anyone ever tried or used something like this before?
View 3 Replies
View Related
Jul 11, 2013
I'm having an issue with pound signs in my table for specific items. I've create a DB that when you click a command button it opens a form and in the form it has a notes field. In the notes field once where i had data is now pound signs.
The DB is setup so when you click another command button to close out, it saves the record. It works 98% of the time but the i'm concern about the other 2% of the time.
View 6 Replies
View Related
Mar 13, 2014
I get a negative value when i run the below expression.
The expression picks the month from the field txtmonth in form "frmYearToMonth" and search's the crosstab query "ctbYearToMonth" for the corresponding value in txtMonth.
=DLookUp([Forms]![frmYearToMonth]![txtMonth].[Value],"ctbYearToMonth","")
The value is correct but there is a negative sign before the value how do i eliminate the negative sign.
View 5 Replies
View Related
Jun 24, 2013
As I am having difficulty keeping my database at work digitally signed due to other users using the database; I was curious if I could create a batch file to automatically run at night to sign the database, so that it can automatically update in the AM, without being prompted questions. Or something of this sort?
View 12 Replies
View Related
Apr 14, 2012
I have a command button on a Web Mutli-Record form that is using a "= [Report_URL]" value within the Hyperlink Address property. This all seems to work other than the fact that when the link popups up it has a "#" on either side that basically makes it an invalid address. How do I get rid of the # signs to get the web address popup in the URL when a user clicks on the Command Button that is associated to the row the record is on.
View 4 Replies
View Related
Jun 13, 2006
I have set up a number field to enter in the amount of money we have spent on a particular project, and when I enter, say £645.18, once I press TAB to move to the next field, it reverts to £645....
I have the decimal places thing set at 2, and the format on currency......
View 3 Replies
View Related
Aug 21, 2006
Hi ,dear friend, which games have you ever played? Here are some good news about games for you, You can focus on this website. and this website can give you a hand in time, when you are in trouble. I think if you want to play the game well, you must have good weapons, right ? so if you want to buy the gold, it is one way you can buy the gold to buy the weapons. we deliever gold vvvvvery fast and provide excellent service
the website is [url=http://www.gneedg.com]
you can come to have a try!!!!!!
and wish can make friends with you in games or out of games.
network games：
US WOW , Maple Story
EURO WOW, Matrix Online
FFXI , EVE Online
DAoC ; Rose online
Guild Wars ; Rune scape 2
EQ2 Ragnarok Online
Dungeons and Dragons Silk Road online
and so on or Power Leveling.
you also can contact them via:
AIM：gilssales
ICQ：108239029
Yahoo: sellgilstoyou 5051360 8379263 13107942609
Msn:gils_sales@hotmail.com
http://www.gneedg.com
View 1 Replies
View Related
Jan 19, 2005
Hoping someone can help. I have looked for an answer and can't quite grasp what I need to do. I am using Access 2000.
Basically, I have a quote form that adds together all job related services and totals them using a currency field. Sales would like to have the option of quoting the job two decimal places or going out to three. So, I need to round to the two different cost options. I can't figure out how to do this. So, my question is:
1) Am I using the correct data type?
2) If currency is most appropriate, how do I show results such as:
$12.327 and $12.33.
If I only change decimal property (therefore, the display) for the fields, the form shows: 12.33 and 12.330. Have tried using the Round function different data types and not having any luck.
Hope this makes some sense. Thanks!
View 1 Replies
View Related
