Public Function For Vbcrlf
Apr 5, 2008
I'm new to VB and am learing slowly with all your great help in this forum.
I'm wondering if its possible to write a Public Function for vbCRLF. I have a field in multiple forms that are all named 'Note'. If I have the following code:
Public Function PubNoteLF()
On Error GoTo PubNoteLF_Err
My!Note = My!Note & vbCrLf
PubNoteLF_Exit
Exit Function
PubNoteLF_Err
MsgBox Error$
Resume PubNoteLF_Exit
End Function
When I run the code I get Compile Error: 'Sub or function not defined.'
Can someone tell me what I'm doing wrong? Its problably something real basic, but I'm stumped. Thanks.
View Replies
ADVERTISEMENT
Oct 2, 2004
I haev a report with 15 sub reports. I have to use Visual Basic to format the sub reports. I know how to do the formatting (see below) but what I would like to do is have one function (Public) that I can pass the subReport name to and have the formatting happen. This would be mush easier to maintain than copying the code below into on_print events of all 15 sub reports.
Has anyone done this and have an example??
Thanks
--------------------------------------------------------------------------------------
Private Sub GroupHeader0_Print(Cancel As Integer, PrintCount As Integer)
Dim widthOfBox, startLeftSide
startLeftSide = 0.017
widthOfBox = 0.21
Me.ScaleMode = 1
Me.ForeColor = 0
'Repeat the following line of code for each vertical line
' 1*1440 represents 1 inch
' Me.Line (0 * 1440, 0)-(0 * 1440, 14400) 'Draws line at Left Margin
Me.Line ((startLeftSide * 1440) + widthOfBox * 0 * 1440, 0)-((startLeftSide * 1440) + widthOfBox * 0 * 1440, 14400) 'Draws line at Left Margin
Me.Line ((startLeftSide * 1440) + widthOfBox * 1 * 1440, 0)-((startLeftSide * 1440) + widthOfBox * 1 * 1440, 14400) ' Draws next line
Me.Line ((startLeftSide * 1440) + widthOfBox * 2 * 1440, 0)-((startLeftSide * 1440) + widthOfBox * 2 * 1440, 14400) ' Draws next line
Me.Line ((startLeftSide * 1440) + widthOfBox * 3 * 1440, 0)-((startLeftSide * 1440) + widthOfBox * 3 * 1440, 14400) ' Draws next line
Me.Line ((startLeftSide * 1440) + widthOfBox * 4 * 1440, 0)-((startLeftSide * 1440) + widthOfBox * 4 * 1440, 14400) ' Draws next line
'the 14400 is an arbitrary number to increase the line to the max of a
'section.
End Sub
View 1 Replies
View Related
Feb 13, 2015
I have a query that I'm working on through Access 2010's design view. I'd like to add a criteria to the query where it only shows results with the employee name column matching a global variable I created that stores the name of the currently logged in employee.
Here's my vba code that declares the global variable and the public function i'm trying to pass as criteria in the query:
Global gbl_loginName As String
Public Function returnName() As String
If IsNull(gbl_loginName) Then
returnName = "test" ' dummy account created for development only
Else
returnName = gbl_loginName
End If
End Function
and here's the SQL code from Access's design view:
SELECT [Entry of Hours].WC, [Entry of Hours].[Employee Name],
[Entry of Hours].[Set Up Time], [Entry of Hours].[Run time],
[Entry of Hours].[Traveler Number], [Entry of Hours].[Entry Date],
[Entry of Hours].[Quantity Finished], [Entry of Hours].Notes, [Entry of Hours].WPS,
[Code] ....
when I try running the query, however, I get this error:
'returnName' is not a recognized built-in function name
Is there a problem with using public functions in Access' design view?
View 10 Replies
View Related
Jan 14, 2008
Hi all,
I'm trying to get a public function to work within the design view of a query. The function is defined as:
Public Function Percentile_(fldName As String, _
tblName As String, p As Double, _
Optional strWHERE As String = "") _
As Double... ( I can put the whole code if u need it)
Any thoughts about how I can make the Percentile function calculate values according to a GroupBy statement and not for whole data set?
View 14 Replies
View Related
Oct 4, 2013
I am trying to read the value of a control on an open form from a Public Function in a Module with no luck. I suspect the issue is syntax.
Code:
Public Function MyFunction(varFormName As String, varControlName As String)
If Forms(varFormName).Controls(varControlName) = True Then ' = 0 even when control is -1
Else
End If
End Function
The variables pass through fine but the If statement equals zero regardless of the state of the form's control. I tried several variations to no avail.
If Forms(varFormName).Form.Controls(varContactControl ) = True Then
If Forms(varFormName)!Form.Controls(varContactControl ) = True Then
Etc.
View 4 Replies
View Related
Jun 4, 2014
I have an issue with this case select below. The DelayStart is time so lets say I put in the debug window
?DatePart("h", #04:00pm#)
The result would be 16 which is correct BUT the issue is my second shift starts at 04:01pm and the result is still 16 untill 5pm. How do I fix this so I get the correct shifts? Im guesing use something other than DatePart but what?
'Daylight 6:00am - 4:00pm
'Afternoon 4:00pm - 2:00am
'Midnight 2:00am - 6:00am
Code:
Public Function getShiftForRecord(DelayStart As Variant)
On Error Resume Next
Select Case DatePart("h", DelayStart)
Case 6 To 16 'Daylight 6:00am - 4:00pm
[Code] ....
View 11 Replies
View Related
Oct 29, 2007
Hi All
I have used Allen Browne's code (see http://allenbrowne.com/ser-16.html, bottom of page) as a model for my user-defined type and public function in an events management database.
Using the function in forms/VBA works fine.
But my DB crashes whenever I try to use it in a query.
My modules code:
= = =
Option Compare Database
Public Type EvCheks
EvType As String
EvAttCat As String
EvUnitAss As String
EvCheksAll As String
End Type
= =
Public Function getEvCheks(EV, EvUnit) as EvCheks
'Event Type: Event or DL
If (DLookup("evtype", "tblevents", "[evid] = " & EV)) = "Event" Then
getEvCheks.EvType = "Y"
Else: getEvCheks.EvType = "N"
End If
'Event Attendance Category: INDB= in database or LIST
If (DLookup("evattcat", "tblevents", "[evid] = " & EV)) = "INDB" Then
getEvCheks.EvAttCat = "Y"
Else: getEvCheks.EvAttCat = "N"
End If
'Event Assessing Organisation
Dim AOROName As String
Dim AOName As String
AOROName = DLookup("evunitassessable", "tblevunits", "[evunitid] = " & EvUnit)
AOName = Mid([AOROName], 1, InStr([AOROName], "/") - 1)
Select Case AOName
Case "NA"
getEvCheks.EvUnitAss = "N"
Case "ABCD"
getEvCheks.EvUnitAss = "Y"
Case Else
getEvCheks.EvUnitAss = "X"
End Select
getEvCheks.EvCheksAll = getEvCheks.EvType & getEvCheks.EvAttCat & getEvCheks.EvUnitAss
End Function
====
On a form, I have a button with on-click event code that defines the EV and EVU variables and displays a message box
MsgBox getEvCheks(EV, EVU).EvCheksAll
This works fine.
=====
In a query I have this SQL code:
SELECT tblEvUnits.EvId, tblEvUnits.EvUnitID, getevcheks([evid],[evunitid]) AS EventDetails
FROM tblEvUnits;
This causes the db to crash.
I cannot get the "back-end" definition of the function into the query, as Access rejects it because of the dot, i.e. ".EvCheksAll".
I suspect there is some formatting quirk for using a public function that includes a user-defined type, in a query.
Any/all assistance much appreciated.
Regards
AlanM
View 3 Replies
View Related
Jan 23, 2014
I have built an access application that contains a set of buttons along the top of every form that serve as navigation.* These buttons each perform the same function on every form they are on. (menu opens the main menu, etc) I have database macros to assign each button the same function but I still have to go through each form and manually assign them. I was wondering if it was possible to define a public function that on db open will look for all buttons with a certain name and assign them the macro. (so all buttons called cmdmainmenu will have the OpenMainMenu macro assigned and so on).Before you go there, I have already tried the navigation form and set all forms as subforms.
View 5 Replies
View Related
Sep 23, 2014
Question for Documentation purpose: Should the Public Type be declared in its own module?
Or should it be declared in a standard module where non-public functions use it? It is not for a Form module use.
For a Rule Engine, a function is calling one record on 4 different SQL Views (as linked tables) that have the same field format.
For speed, the recordset should only be opened once. However, there are multiple values that must be returned to the result table multiple fields.
One way to return multiple values is an Array. That has over head too.
Another way is to create multiple public variables. Not my choice for documentation. Another is to create a string.
This is a pure code module with several non public functions / subs. What is the documentation preference? List a Public Type close to the function, or place it in the Global module?
Background: A function can only have one return value.
By creating a public Type, multiple values can be returned.
Code:
Public Type Income
Wages As Currency
Dividends As Currency
Other As Currency
Total As Currency
End Type
Use this structure as the return type for a function. In a real situation, the function would look up your database tables to get the values, but the return values would be assigned like this:
Code:
Function GetIncome() As Income
GetIncome.Wages = 950
GetIncome.Dividends = 570
GetIncome.Other = 52
GetIncome.Total = GetIncome.Wages + GetIncome.Dividends + GetIncome.Other
End Function
To use the function, you could type into the Immediate Window:
GetIncome().Wages
(Note: the use of "Public" in the Type declaration gives it sufficient scope.)
Important Notice The way this function is called will work, but is wrong from the aspect it re-calls the recordset over and over.
See the proper way to use it submitted below.
View 5 Replies
View Related
Oct 22, 2013
I am designing a Public Function F()
I want this function to populate value from a any field selected from any table to any text box in any form ...... Lets say in a Database named TestDB we have a Table named tblTest , a Form named frmTest and in this form( frmTest ) we have one Bound Combo Box named cmbTest and one unbound TextBox named txtTest
We assume that the table tblTest has three fields : TestID , FName and LName .
We also assume that there are already some records in the Table tblTest .
If the function F() is already programmed it should take as arguments as it follows :
F(FormName as??? ,ControlName as ???, TableName as ???, FieldName as ???, ID_Field_Name_of_the_Table as ???, Combo_box_selected_ID as ???)
In result the function should (probably) DLookup (FieldName , TableName , ID_Field_Name_of_the_Table = Combo_box_selected_ID ) and then store the value in a variable ( probably Variant ???) , lets say called varSetValue.
The problem is IF this is the correct way to handle that issue , than what should i do next.... I really don't know how to pass a Control's name to a function from the Event module of the ComboBox -
I mean - how can I obtain the value so it is usable for the function .... What data type should be the function arguments so I can use them to set a value for a control in any form .
In example : If the Dlookup() is somehow successfull then I want to assign the varSetValue to the txtTest what should I do : FormName.ControlName.Value = varSetValue >??????
I have read a lot materials but couldn't find a good answer for that , and aswell what data type should be the arguments that the function accepts and how do I obtain Controls and Forms names so I could use them in the function as described above .
View 4 Replies
View Related
Sep 17, 2013
I created a Public Function called fNetWorkDays in my access database, however, when I try to use it in an expression I get "Undefined function 'fNetWorkDays' in expression". The Public Function is in a standard Module in my vba project. Why I cannot call it in my queries?
View 3 Replies
View Related
Nov 13, 2014
I have created a Public Function that would get a new Production Instructions number based off the [PI Number] of Tbl_Production_Instruction table.
I have a form that people will put in all information but the PI Number, then when ready they will click a button to update the PI Number. I place an unbound txtbox that will be hidden, with the control source to =NewPINum(), but when I tested the see if the unbound txtbox was populated with the new PI Number it was blank.can't figure out what I am doing wrong.
Code:
Public Function NewPINum() As String
Dim vNum As String
Dim strYYMM As String
Dim getnextPI As String
strYYMM = Format(Date, "yy") & "-" & Format(Date, "mm") & "-"
If strYYMM = Left(DMax("[PI Number]", "Tbl_Production_Instruction"), 6) Then
vNum = Right(DMax("[PI Number]", "Tbl_Production_Instruction"), 3) vNum = vNum + 1 getnextPI = Format(Date, "yy") & "-" & Format(Date, "mm") & "-" & Format(vNum, "000")Else
vNum = "001" getnextPI = Format(Date, "yy") & "-" & Format(Date, "mm") & "-" & Format(vNum, "000")
End If
End Function
View 4 Replies
View Related
Dec 23, 2013
I have the following function that I found online. Unfortunately I can't remember where I got it since I've had it for a little while. Today, when I tried to actually put it to use it didn't work.
I'm calling it from a form as follows: CompactDB (tblHotword)
tblHotword is just a random table from the back end. My understanding of the function was that it would use that table to connect and get the file name of the back end.
Whenever I run it, Access pops up a window that says "Object required" and nothing else. It doesn't look like a standard error message popup. When I click 'OK', Access continues with the rest of the code as if nothing went wrong. The function doesn't run though.
Code:
Public Function CompactDB(TableName As String) As Boolean
On Error GoTo Err_CompactDB
Dim stFileName
DoCmd.Hourglass True
stFileName = db.TableDefs(TableName).Connect
[code]....
View 8 Replies
View Related
Jun 11, 2013
I have multiple reports that use similar IIF statements as the controlsource for four textboxes. Naturally, I don't want to have to update twelve controlsources if any of the calculations change, so I thought I'd make this a public function. However, I don't know how to pass along multiple textboxes as variables. Here's what I have so far:
Code:
Option Compare Database
Public Function txtColor(ByRef textbox As Control)
Dim str1, str2, str3, str4 As String
'The IIf statement is simplified for this example. It's not important.
str1 = "=IIf(IsNull([Inquiry start date]),'W',IIf([txtInquiry]<1 And IsNull([Inquiry end date]),'R'))"
[Code] ....
And this is in the report (where ??? is what I'm asking about)
Code:
Private Sub Report_Load()
Call txtColor(???)
End Sub
The error I get is "Runtime 424 Object Required"
View 7 Replies
View Related
Feb 26, 2014
I am using a public function to feed a variable string to a query. So far I have got:
Code:
Public Function ClientStreetModule(firstLVar As Variant, streetVar As Variant, newFL As Variant) As String
Dim cslStr1 As String, newStreet As String
newStreet = Right(streetVar, Len(streetVar) - Len(newFL))
[code]....
However, I only need to use newStreet as the true part of iif, in which instance all are longer. At least I think this is the problem. I realise I might need to use NZ but am not sure how. Why it is evaluating and giving errors for all records and not just when the iif criteria is true as I want it to?
View 7 Replies
View Related
May 31, 2014
I have a table with only two fields and one record: BegDate and EndDate (beginning and end date of the reporting period respectively). I also made a function with variables that look up those values for use as a date parameter in a query.
Here is the code:
Option Compare Database
Option Explicit
Public Function getCurrentRepDates() As Date
Dim dtBegDate As Date
dtBegDate = DLookup("BegDate", "tblCurrentRepDates")
[Code] ....
I am getting a syntax error for the line marked red. How can I use "Between" function in VBA code? Access 2010
View 5 Replies
View Related
Jun 14, 2005
I have a Send button on my Access form, and in its Event Procedure i have the following:
stText = "You have a new Task" & Chr$(13) & Chr$(13) & _
"Number: " & stCOFNumber & Chr$(13) & _
"ID: " & stCompanyID & Chr$(13) & _
"Name: " & stCompanyName & Chr$(13) & _
"Name: " & stContactName & Chr$(13) & _
"Address: " & stAddress & Chr$(13) & _
"Terms: " & stTRDW & Chr$(13) & _
"Pre-Requisites: " & stPreReq & Chr$(13) & _
"Location of Work: " & stWorkLoc & Chr$(13) & _
"Activities: " & stDelivActiv & Chr$(13) & _
"Start Date: " & stStartDate & Chr$(13) & _
"End Date: " & stEndDate & Chr$(13) & _
"Please reply to confirm Task"
This is supposed to be the text part of the SendObject command.
Now in my outlook textbox, im getting:
You have a new taskNumber: 123456ID:Name: Commercial Bank Name: john johnAddress: Damascudffdfd
Yousef El Azmi
Commercial Bannk Terms: iiiiiiiiiiiiiPre-Requisites: iiiiiiiiiiiiiiLocation: iiiiiiiiiiiActivities: iiiiiiiiiiiiiiStart Date: 12/12/2004End Date: 14/12/2004Please reply to confirm Task.
Buttom line is, im not getting them on a new line like im supposed to. VBCrLf is giving me errors whenever i use it instead of chr$(13).
What do you think?
How can i have a text formatted, with each info on a line?
Thank you for your help.
View 1 Replies
View Related
Dec 5, 2005
How do I replace vbcrlf in a string with "NN"
I have tried putting vbcrlf and "NN" as parameters into this but it doesn't work (maybe it can't see vbcrlf as a separate word!)
Function ReplaceWord(strText As String, _
strFind As String, _
strReplace As String) As String
' This function searches a string for a word and replaces it.
' You can use a wildcard mask to specify the search string.
Dim astrText() As String
Dim lngCount As Long
' Split the string at specified delimiter.
astrText = Split(strText)
' Loop through array, performing comparison
' against wildcard mask.
For lngCount = LBound(astrText) To UBound(astrText)
If astrText(lngCount) Like strFind Then
' If array element satisfies wildcard search,
' replace it.
astrText(lngCount) = strReplace
End If
Next
' Join string, using same delimiter.
ReplaceWord = Join(astrText)
End Function
View 1 Replies
View Related
Sep 16, 2005
Why can't I set a controls default value to a public variable?
View 2 Replies
View Related
Nov 20, 2007
I'm into one of the subforms that will be using the public variable from the main form and am not having success passing the data from the main form over. on the subform, i created a textbox (txt_currentyear) w/ this in the control source field: =[WrkYear] & " Golf Outing"
WrkYear was the defined in a module as:
**********
Option Compare Database
Option Explicit
Public WrkYear As String
**********
I have created a listbox w/ a few years in it (current_year_listbox). this has =[WrkYear]=Me.Current_Year_listbox.Value in the after update field. i loaded the main form, selected the year, went into the subform to see if it passed the data along w/ no luck.
do i need to call or reference that module in every form or report before i can use the data from it? right now, i just get an empty field on the subform.
View 5 Replies
View Related
May 1, 2005
Hi all,
I have done a multi user database for a private company (and thanks to all those that helped me out) but now I need to do another database to put onto the Internet so the general public can view it and order the products. Obviously some of the database needs to be private (so I can update records) but some needs to be viewed over the Internet. I would like the general public to be able to view the products over a web page, not download a program to view the database.
I have made the database already so I can pull up a web page (from within access) and order the products - all I need to know is how to do this over the Internet?
I don't expect anyone to hold my hand through this, I just ask if anyone has a link to a walkthrough so I can do this?
Regards, James
PS Have another question -
I have 17, 500 records and I wish to add a new Field, how can I change the values of the Field without going thorugh them one by one? e.g If the Record has 'Rarity = U' then I want the 'price' (which is the new field) to equal 1.
View 8 Replies
View Related
Oct 9, 2007
It just occurred to me that I use certain variables in several of my routines. Maybe you've done the same... something like:
Dim db as DAO.Database
Dim rst as DAO.recordset
Dim qdf as DAO.QueryDef
Now, if it's re-used in many routines, wouldn't it make more sense to make it a public variable, and set them to whatever you need it for a certain routine? Would it be more efficient than having to re-initializing and discarding it for every routine that used it? What problem would one expect from making them public?
Also, since it's very common to set db = CurrentDb, would it also make sense to set it publicly, and for cases where you aren't using CurrentDb, use a private variable just for that one?
View 7 Replies
View Related
Oct 10, 2013
I have a query
Code:
Select distinct [tbl_DTP/CTP].id_zlecenia, [tbl_DTP/CTP].Folia_na_lakier_UV, [tbl_DTP/CTP].Wykrojnik, [tbl_DTP/CTP].Makieta, [tbl_DTP/CTP].Matryca_do_tloczenia, [tbl_DTP/CTP].Matryca_do_zlocenia, [tbl_DTP/CTP].kalka, tblGoraZleceniaRoboczeLaczenie.NumerZlecenia from [tbl_DTP/CTP] inner join tblGoraZleceniaRoboczeLaczenie on [tbl_DTP/CTP].id_zlecenia = tblGoraZleceniaRoboczeLaczenie.NumerZlecenia where tblGoraZleceniaRoboczeLaczenie.NumerZlecenia = r1;
Where "r1" is a public variable as string.The variable has value e.g. "10/145" But query can't get this value and all the time ask about value from "r1" :/
View 3 Replies
View Related
Aug 10, 2005
Hi all,
I seem to have encountered a strange problem at work.
I declared a public variable for user department. The user selects his department from a Log On form and if the password is correct, he opens another form with the department variable passed on in openargs.
All of this works fine in access2k but upon testing with 2003, the openargs somehow do not seem to be being passed on. Maybe I am being dense somewhere but it is kinda puzzling for me.
I am not using access's security for users and groups because I am trying to reduce the complexity of the whole project (I wont be around to maintain it next time).
Any help rendered is greatly appreciated!
View 2 Replies
View Related
Apr 14, 2015
Is it possible to open another database, set a Public boolean variable in a module?
in db1: Open database by Access.Application, OpenCurrentDatabase, setting obj to db2.CurrentProject, loop through main objects
in db2: Public ByPassCloseVar As Boolean is in a module ModLinkTblReview
I have a process that opens up a database runs through all of its objects to get their properties and values. There is a form that is set up on Unload to close the tool if the variable is set to False. When I open the form to get the properties and their values, then close the form, it closes the database. I would like to set the variable to true in order for the database to stay open.
Thought something like this would work: db2.Modules!ModLinkTblReview.ByPassCloseVar = True
Indicates that method or data member does not exist.
View 5 Replies
View Related
Apr 3, 2013
I am working on a database where I want some specific information displayed on a form, preferably on the form header. I want to display this on all of my forms. In a standard module, I have a code segment that runs a query returning values, and I assign those values to my public variables. I run this code segment triggered by "on activate" of each form.
The variables contain an Event Date, and an Event Name. I want this information to appear on each form. How do I get this data onto my form as part of the form header, or if cannot put on header section, then in the detail section?
View 2 Replies
View Related
