Pull Down Menu In Query

May 22, 2006

I would like to build a query and ask it to choose a boat name out of a list of pre set names. When the pop up box appears to type the name, i would like it to be a combo box where the name can be pulled from the list. can this be done? thanks in advance.

- Andre'

View Replies


ADVERTISEMENT

Query Updates Pull Down Menu

May 5, 2006

Greetings,
I have a table with the following 2 fields: Make and Model.
When I am in data sheet view I have Make set up as a pull down menu with the various distinct options (i.e. Ford, Chevy, Toyota, etc.). I would like to set up the table so that when I click on Ford, for instance, it will query a different table (carclass) and output only the Ford vehicles on a drop down menu for the Make field to choose from. (i.e. Mustang, Freestar, Focus, etc.)
For Model, I have the following code for the Row Source:

select model from carclass where make=make(from the user input of the make).

Any help or suggestions would be greatly appreciated.
Thank you in advance for your assistance.
Cheers.
John

View 2 Replies View Related

Queries :: Adding Pull Down Menu To Query

Jul 28, 2014

I have a query built that gives me info per employee. I built a question into the criteria that ask for the employees name. When a person types the name results are given. If the person mispells the name, results are not given.

I have everyones name on a seperate table. How do i create a pull down menu on the query to choose the names?

View 7 Replies View Related

Reports :: Column Heading On Report To Pull From Main Menu?

Nov 20, 2014

I have fields on the main menu where folks put in a start and end date prior to running a report. I'm doing a monthly report that pulls current month, and two prior months of data. For example, the user selects a date range of 10/1/14 to 10/31/14 the report will show August, September and October results.

I need the column headings to change each month depending on the date range they select to run the report so in November they will pull 11/1/14 to 11/30/14 and get September, October and November.

The headings for the columns would then adjust.

I put an unbound text box with the formula as follows in the control source of the report page header to pull the month that is equal to the current month minus two (I'm just showing one of the column headings formula):

=Format([Forms]![Main Menu]![EndDate]-2,"mmmm yyyy")

This is not working. It's pulling the current month which I have set to run for October so it should show August 2014.

View 3 Replies View Related

Pull Down Query List

Nov 1, 2006

I was wondering was it possible to have my queries in a pull down list and I hit a button and the query/report is ran? Or do I have to stay with about 6 or 7 buttons on a form?


I know it sounds crazy.....

View 2 Replies View Related

Query To Pull First & Last Record?

Jan 4, 2007

I am having trouble. I have a log table and I am trying to pull two records at once. The records im trying to pull is the most recent record update as well as the original record.

Example:

I want to pull for Toysrus the first log intry for this company when I first put the record in. And I want to pull the most recent update that I did for this company. Is there a way to pull both records at the same time? The first and the last?

Any help would be appreciated. THANK YOU SO MUCH!!!!!

View 2 Replies View Related

Query To Pull Past 3 Months

May 22, 2007

I have a query that I need to always pull data from the newest past 3 months, so if this query were ran today it would take from months 2,3,4 (Feb, Mar, Apr). Any clue on how to do this?

View 14 Replies View Related

Eliminating Duplicates From A Query Pull

Nov 3, 2004

Hello,

I am building a query that pulls from one databases but I am running into duplicates.



Here is the skinny:



From the [tbl_databases], I am setting criteria that restricts a column containing “Visio”, more specifically, “Not Like “*Visio*”. I am also setting criteria that restricts a column containing “OLD” (it is a Yes/No field).

.

The problem is that there are duplicate rows that contain both “Visio” and “Old. So, simply suing my criteria restriction are pulling out the Visio and Visio/Old orders as well as Old and Old/Visio order.



Can I create a subquery that contain the combination of “Visio” and “Old” to restrict the subset from being extracted twice?



I think I have the logic but not sure not to set it up.



Thanks

Tuktuk

View 1 Replies View Related

How Do I Pull Subform Data To A Query?

Sep 26, 2007

Hello,

I have a form with a subform. I have the subform running a update query on a command button in the subform. The subform has the textboxes and I cant seem to get the query to pull the data from those textboxes. I have used the normal [forms]![form_name]![textbox_name] in the past but everything I try to pull the subform textbox data is not working.

I have tried
[forms]![form_name]![subform_name]![textbox_name]
[forms]![form_name]![subform_name].[form]![textbox_name]
[forms]![form_name]![subform_name].[form].[textbox_name]

Nothing works. What is the correct syntax for this? Any help would be great !!! Thank you in advance.

Joe

View 2 Replies View Related

Possible To Pull A Query Into Form Design?

Jul 4, 2014

Is there a way to pull data into my form so that I can see current stats about my table in the same box as where I'm entering new data?

View 7 Replies View Related

Query To Pull Most Recent Account Balance

Nov 6, 2007

I am trying to run a query to select the most recent balance from a table that lists balance by date and account number. Basically I need to select the most recent balance for a given account number. Here are the details:

Table: CBALANCE
=========================
ACCOUNTNO
BDATE
AMOUNT

What works: This gives me the most recent account, but I cannot get the amount
=========================
SELECT Max(CBALANCEMIB.BDATE), CBALANCEMIB.ACCOUNTNO
FROM CBALANCEMIB
GROUP BY CBALANCEMIB.ACCOUNTNO;

What I want to work: This returns results which should not be in the result set (older balances)
==========================
SELECT Max(CBALANCEMIB.BDATE), CBALANCEMIB.ACCOUNTNO, CBALANCE.AMOUNT
FROM CBALANCEMIB
GROUP BY CBALANCEMIB.ACCOUNTNO, CBALANCE.AMOUNT;

Am I trying to do something too complicated for the query language?

View 5 Replies View Related

Query To Pull Most Recent Account Balance

Nov 6, 2007

I am trying to run a query to select the most recent balance from a table that lists balance by date and account number. Basically I need to select the most recent balance for a given account number. Here are the details:

Table: CBALANCE
=========================
ACCOUNTNO
BDATE
AMOUNT

What works: This gives me the most recent account, but I cannot get the amount
=========================
SELECT Max(CBALANCEMIB.BDATE), CBALANCEMIB.ACCOUNTNO
FROM CBALANCEMIB
GROUP BY CBALANCEMIB.ACCOUNTNO;

What I want to work: This returns results which should not be in the result set (older balances)
==========================
SELECT Max(CBALANCEMIB.BDATE), CBALANCEMIB.ACCOUNTNO, CBALANCE.AMOUNT
FROM CBALANCEMIB
GROUP BY CBALANCEMIB.ACCOUNTNO, CBALANCE.AMOUNT;

Am I trying to do something too complicated for the query language?

View 6 Replies View Related

Queries :: Query To Pull ALL Records Whether Blank / Zero Or Value

Jun 24, 2013

I have two tables: Table #1) [Request Table] Customers request our company to stock a certain Part Number with a minimum value. Ajax - P/N "NP4i" - Min "30".

Table #2) [Sales History] All sales purchased and the "Qty-Total" purchased. For simplicity Fields are limited.I created a CrossTab Query that displays from [Request Table] P/N's requested/ min values (Row Headings) then showing P/N's purchased [Sales History] Value="Qty-Total" Sum and

Column=Format([Invoice Date],"mmm/yyyy") group by, showing last twelve months.
Ex: Customer name, Part Number, Minimum, May/2013, Apr/2013, Mar/2013 and so on.
AJAX, NP4i, 30 4 21 5 and so on.

The Crosstab query list only requested Part Numbers that have at least One sale wihin the last twelve months.If there are NO sales, the crosstab query will NOT show this Part Number.My boss wants to see the requested Part Numbers that were never purchased along with the ones purchased.He wants to address the NO sales, yet they requested we stock that particular Part Number for them.

Is there any criteria I can use to force the Part Number field on the [Request Table] side to populate even though there were NO sales within the last twelve months?

View 1 Replies View Related

Modules & VBA :: Can't Pull Form Text Box Value Into Query

May 21, 2015

I have a perplexing problem. I'm creating a simple db to enter borrower audit checklist data with the following tables:

Questions -- A list of 17 pre-defined audit questions, with fields QNum and Question
Audits -- One record for each audit (pk AuditKey is an Autonumber), and some borrower fields
AuditQuestions -- Linked to Audits, with pk of AuditKey and Qnum, and a Question and Answer (yes/no) field

The Audits form has the Audits table as its datasource, and an AuditQuestions subform. When I go to a new Audits record, there are initially no subform records attached. When I enter a borrower name, the field AfterUpdate event runs the following code:

Code:
DoCmd.OpenQuery "LoadAuditQuestions"
Me.AuditQuestions.Requery

The SQL for LoadAuditQuestions is

Code:
INSERT INTO AuditQuestions ( AuditKey, QNum, Question )
SELECT [Forms]![Audits]![AuditKey] AS Keyval, Questions.QNum, Questions.Question
FROM Questions
ORDER BY Questions.QNum;

I start out with both Audits and AuditQuestions tables empty. When I run the code by entering a borrower name, I get, "... can't append all the records in the append query ... didn't add 17 records due to key violations". It acts like it's getting a null value from Forms!Audits!Auditkey, but if I select the Debug option and check the value from the Immediate pane, it shows a valid number. Also, if I run the query manually with the form open, it loads the questions correctly.

The first Audits record is loaded with questions in the subform so you can see the desired results. To see the problem, go to a new record, enter a name, and hit tab. Another piece to the puzzle is, if you do this on an existing record, it works fine: Click No in response to the error message that appears, then click End on the Debug message. Go to a different audit record, then come back to the one you just created. Change the name, and it works correctly. It's as if it doesn't know what the AuditKey is the 1st time, but if you check it in debugger, it is loaded. In fact, I put in code in the AfterUpdate event to plug the LoanNumber field with the Forms!Audits!Auditkey value, and it worked, but the subsequent query still failed.

View 3 Replies View Related

Queries :: Query To Pull Previous Record

Jan 20, 2014

I have a form that is used to book a new event for a client who is already in the database.Within that form I have a subform that is based on a query which displays information from that client's previous event. I did this using a solution found in the following thread: URL...It is based on pulling the second to last record that is related to the current client. It works perfectly when booking a new event that has taken place on a previous date. However, if the previous event occured on that same date (but at a previous time), it doesn't register.

I would prefer a query that would pull the record previous to the current one, instead of pulling the second to last record out of all that client's events.it would also mean that if more events are booked, then a past event is opened in a form, the sub forms in that form will display the event just prior to the current record.

View 14 Replies View Related

Queries :: How To Pull All Records In One Query If A Value Exists

Mar 18, 2014

I have one table let's call is table1. It contains about 5 columns with standard employee data with about 10,000 rows of data containing about 1,150 employees. All employees have multiple rows of data. There is one column titled JOB. I need to pull all rows of data for each employee ONLY if there is at the minimum one value for the employee in the JOB column. I do not want to pull employees that have no values in the JOB column. They can be excluded from the query.

Example of all record for one employee. I need to pull all rows of data ONLY if the employee has a value in the JOB column.

Name EE_ID JOB CAT EFF_DATE

John Doe 1006 CLERK F 01-JAN-2010
John Doe 1006 P 21-JAN-2010
John Doe 1006 CLERK P 01-FEB-2011
John Doe 1006 F 01-MAR-2011
John Doe 1006 P 01-APR-2011
John Doe 1006 CLERK F 01-JUL-2012

View 3 Replies View Related

General :: Pull All Records In One Query If A Value Exists?

Mar 18, 2014

I have one table let's call is table1. It contains about 5 columns with standard employee data with about 10,000 rows of data containing about 1,150 employees. All employees have multiple rows of data. There is one column titled JOB. I need to pull all rows of data for each employee ONLY if there is at the minimum one value for the employee in the JOB column. I do not want to pull employees that have no values in the JOB column. They can be excluded from the query.

Example of all record for one employee. I need to pull all rows of data ONLY if the employee has a value in the JOB column.

Name EE_ID JOB CAT EFF_DATE

John Doe 1006 CLERK F 01-JAN-2010
John Doe 1006 P 21-JAN-2010
John Doe 1006 CLERK P 01-FEB-2011
John Doe 1006 F 01-MAR-2011
John Doe 1006 P 01-APR-2011
John Doe 1006 CLERK F 01-JUL-2012

View 3 Replies View Related

Modules & VBA :: Pull Data From Query (or Table)

May 4, 2015

I have a table that has four columns. Column 1 had people's names, column 2 has their email, 3 has a category, and 4 has their office.

I have a form with radio buttons, When you check a radio button and press OK it will display the e-mails for the people selected. Problem comes when it's by category, since categories are not unique to one person. I want to click the category radio button and have it display every person under that category, concatenated with a comma.

Problem is I can't make a listbox because it will show the same categories several times instead of just once, so I want the radio button with the category name on its label, and then in the code I need to tell Access to go to the table and search for the e-mails from a specified criteria, the category.

How do I do this?

View 1 Replies View Related

Queries :: How To Get Query To Pull Data From All 9 Tables

Mar 13, 2014

I have 9 seperate tables - each of the tables has similar headers

Claim #
Agent
Pass/Fail
Request type
Record Date

I have built relationships between all the tables. I am attempting have a singular query be run based on start and end dates under "record date" . I have the criteria already set. But when I run the Query no information is pulled. How do I get the query to pull this data from all 9 tables?

View 2 Replies View Related

Queries :: Query To Pull Information From Two Date Fields Into One

Jan 21, 2014

I need to know a query to pull information from two date fields into one. I have a BuriedStartDate field and an AerialStartDate field. In a third field I have PlacementStart. I would like to put the date into the PlacementStart field which ever is the oldest date bewtween the BuriedStartDate and AerialStartDate. It has been awhile since I have done any queries on Access 2007. I am completely self taught in Access.

View 2 Replies View Related

How To Show A Full Menu On The Menu Bar

Feb 19, 2007

Hi everyone,
I was trying out the options on the startup item of the tools item on the menu bar and my access window has gone except the following menu items: File,Window and Help.
Can someone kindly show me how to bring back these seemingly lost items?
Thank you for your willingness to help me out!

View 2 Replies View Related

Queries :: Query Criteria To Pull Its Value From Control On A Form - IIF Function

Aug 16, 2014

I want the Query Criteria to pull its value from a control on a form.The form control either has data or is null. (My problems occur when the form control is Null). The field in the table either has data, is null or is blank.

Code:
=IIf(IsNull([Forms]![FormName]![FormControl]),"" Or Is Null,[Forms]![FormName]![FormControl])

This works for the records with fields that are blank.

Code:
=IIf(IsNull([Forms]![FormName]![FormControl]),"",[Forms]![FormName]![FormControl])

This works for the records with fields that have data.

Code:
Like IIf(IsNull([Forms]![FormName]![FormControl]),"*",[Forms]![FormName]![FormControl])

This works for the records with fields that are Null or Blank if i drop the iif function but then i lose the ability to pull criteria data from the form control.

Code:
"" Or Is Null

View 3 Replies View Related

Queries :: Write A Query To Pull Out Dates With Current Year Only?

Jul 18, 2013

all using access 2010. I have a date field. I need to write a query to pull out dates with current year only. ex data: 1/1/10, 1/1/11, 2/1/12, 2/1/13. Need to pull all dates with current year which would be 2/1/13. Tried in query criteria of the date field: =Format(Now(),"yyyy") I received data mismatch. this is a date/time field.

View 4 Replies View Related

Queries :: Query Or Any Code That Can Pull Back End Table Stats?

Dec 27, 2013

I am trying to run some diagnostics on my database. I thought a good place to start would be to look at all of the tables, the number of records each table holds, and each table's size. I have been able to find plenty of code on the web that loops through each table and provides the aforementioned data points, but the code only looks at local tables. SInce the database is split, I have a ton of tables linked to the back end that I am unable to get stats on. Any query or any code that can pull back end table stats?

View 5 Replies View Related

Queries :: Creating Query To Pull Info From Multiple Tables

May 7, 2013

I have DB used for inventory for many different categories. I have a table and form for the following: Location, Printers, Pc's and many more.

What i am trying to accomplish is to have a advanced search form that will display how many pc's and there makes and model from selecting the location name or Cost center from a combo box.

So an example would be I want to select MPP-WDF from the combo box click a button and it will return the number of PC and there makes of model's and some other information in a list of records.

View 9 Replies View Related

Queries :: Create A Query That Will Pull All Of Data Out Of Text File

Nov 13, 2013

I have a text file linked to this database, and I'm trying to create a Query that will pull all of the data out of this text file, and add a rank if two of the values match in multipe records.So in other words, when multiple records have the same [JOBNBR] , I want to evaluate the [TIMESTAMP] value to see if it is the smallest one, and so on.I don't want to create multiple queries to do this, is there any way to do this? Here's what I have:

Code:
DDR: (Select count(*) from tblMyDataImport Where [tblMyDataImport].[TIMESTAMP] < [TIMESTAMP] AND [tblMyDataImport].[JOBNBR]=[JOBNBR] )

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved