Pulling Last Record
Aug 2, 2007
I'm trying to figure out how I can pull the most recent entry in a table for each of the properties in our database. Let me give you some background. This access database is used to format reports from an SQL database - all of the tables are linked and all of my other reports work great except for the one I'm trying to create from a table that gets updated every day by way of a stored procedure that runs every night on the SQL server. In my mind this shouldn't make a difference and I should be able to select whatever data I want from this table/query based upon whatevery criteria I want. The field in the table I'm trying to use is a "date stamp" of when it was updated via the stored procedure. I want the last entry made for each property so I selected "last" as the criteria which should get me approx. 20 lines - one for each property. But when I use this I still get back multiple entries for each property. This seems like it would be easy to do but everything I try doesn't seem to work.
That's why I've turned to the experts here for help.
Thanks
View Replies
ADVERTISEMENT
Apr 13, 2007
Hello Everyone,
I've been trying to figure out why my query only pulls record Object ID 10011399 and not the other one, but I can't figure it out. Can anyone please help me see what's wrong?
Thanks,
Pablo
View 13 Replies
View Related
Jul 7, 2006
I've made the form below, with a sub form in it to show the table below the text boxes. What I'd like, is for the user to be able to select a record on the table (preferably just by clicking on it) and the text boxes to automatically populate with the relevent data. Is there a way to do this?
http://i73.photobucket.com/albums/i204/tomjamieson/frm.jpg
View 4 Replies
View Related
May 17, 2005
I am having problems with my database pulling the wrong record. It is supposed to pull the last record entered and e-mail it to selected people. Sometimes it does this correctly and sometimes it does not. The "powers that be" (my boss) is complaining about the DB not pulling the right record. It seems to be doing it more often than not now. I have tried a repair and compact, but that doesn't do anything. I am not sure why it is doing this. Here is the code that I have in my record source of my report.
SELECT TOP 1 Booking.* FROM Booking ORDER BY [Booking].[BookingID] DESC;
Can anyone help me?????
learnasugo
View 14 Replies
View Related
Jul 17, 2014
I have a form and a subform created. From these two, I have created a report that populates with the information. However, I cannot remember the code, nor where to put it in order for the report to only pull whatever record is current in the form. Currently, the report will create a page for each record stored in the table.
(Access 2007)
View 9 Replies
View Related
Jan 19, 2015
I have a dlookup which gets the empid on login - i know this works as i fire a msgbox with this, this is stored in a global variable.
i have the following code running on 'form_load' to set securities however its just using the first records and not the ones linked to the specified accont - i have a second messagebox fire just before these dlookups just so i know the global is correct
Code:
Private Sub form_load()
DontKick = 0
DoCmd.SetWarnings False
[Code].....
The EmpIDLogin is 1786 (my own) and i have pasted a copy of the table in question (well a portion)
its only using the first row of checks to provide permissions.
View 14 Replies
View Related
Aug 22, 2006
I have a large problem that i need to get figured out ASAP! I have a form text box (named actual cost) that needs to pull a specific record from a table
Now in this table it has multiple rows according to each job. There is a text box (Project number) that has the project that this (actual cost) box should pull from the specific row in the table.
if anyone can help me it would be the biggest help.
-Thanks
Jon
View 3 Replies
View Related
Sep 21, 2007
Hello All...
I'm very new to Access.. so please forgive my ignorance..
Here is the scenario..
I have a table with two fields named "item" & "description" that contains 10 records total.
I have another table with 100 records with the fields "invoice #","item", "price paid","date paid","time paid".
The item fields are linked between the two, and the 100 records contain different invoices for these ten items.
I want to pull the price paid off of the latest invoice, based on the time and date... What is the easiest way to do this?
Thanks!
View 1 Replies
View Related
Sep 29, 2014
I have a file of transaction history from the accounting system. All of the payroll cash payments are coded as ZG. Payroll accruals are coded as ZC. I need a sum of payroll accruals by department that have the same date or later than the last payroll cash payment. How do I write that query?
View 1 Replies
View Related
Dec 4, 2012
I have a subform that is embedded in a main form. The database itself is a few years old and so I think redesigning is out of the question. What I am wondering is if there is any specific code that can go into the tables themselves and populate the form based on the previous record. I would like for the Transfer to Rehabber fields (To and Permittee) to be duplicated on the Transfer From Rehabber fields (From and Permittee) on the next record. Do you think that there is code that will be able to achieve such a thing?
View 12 Replies
View Related
Nov 7, 2005
I have a member roster. I have members who have attended. How do I subtracta list of those who have attended from the roster to find those who havent attended. The only way I know those who have attended is by their sign in date.
View 1 Replies
View Related
Dec 28, 2006
I have created several Queries and I would like to have a column that numbered the results. I have looked all over saw a couple of samples but havent had any luck. Anyone have any suggestions. Thanks for your help and have a good New Year.
Just to clarify basically this is what I need. Loan Number is the Primary key.
# Column Borrower Loan Number
1 smith 123456
2 jones 023567
3 jang 102569
JW
View 2 Replies
View Related
Dec 28, 2006
How could I pull in someone when they do not have data?
There is a name table and data table. My goal is that when I run a parameter query if someone does not have data for that time period to have that name pulled in so that eventually a report could be generated stating there is no data for this person for the time period.
View 1 Replies
View Related
Feb 6, 2008
I'm certainly not new to Access, but this is the first time encountering a problem like this. I have a table with 3 Field Names, [Return], [Header] and [Date]. An example table looks like so..
Return Header Date
1 | 10 | 1/1/2007
2 | 10 | 3/1/2007
3 | 10 | 5/1/2007
13 | 20 | 6/1/2007
14 | 20 | 7/1/2007
I need to take to have group the Header's together, for instance 10, and have it return the [Date] for whichever line has the lowest [Return] value. I just can't figure out how to do it. Any help or insight would be GREATLY appreciated. I'm 90% done with the project, and this last part will seal the deal.
View 3 Replies
View Related
Oct 31, 2006
I have a field that is updated with =Now()
now when I try to run a regular query with the criteria being
=Date()
I get nothing
And the "=" is always disapearing out of the query.
I dont know what is going on. I got the field set up in the table section as a date field with short format.
Can somone please tell me what I am doin wrong when I have followed instructions up to this point....
View 6 Replies
View Related
Mar 11, 2007
Hi, I was wondering if someone could check this code over. I am trying to pull a query (titled: Codes_+_Conduct:_General)which was already created in Access. Here's the code: (the red is where the error message I get is)
-----------------------
<%
Set objCon = Server.CreateObject("ADODB.Connection")
objCon.Open connectionstring
Set objRS = Server.CreateObject("ADODB.Recordset")
strQuery = "SELECT * from Codes_+_Conduct:_General order by subject asc"
objRS.Open strQuery, objCon
IF rs.EOF Then
Response.Write("<tr><td colspan = 3>No Tips</td></tr>")
Else
Do While not rs.EOF
x = x + 1
%>
<strong><%=rs("subject")%></strong><br>
<strong>Q</strong> <%=replace(rs("question"),vbcrlf,"<BR>")%>
<br><br>
<strong>A</strong> <%=replace(rs("answer"),vbcrlf,"<BR>")%>
<br><br>
<%
rs.MoveNext
Loop
End If
rs.Close
Set rs = Nothing
Set objCon = Nothing
%>
------------------
The error message I receive is:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
/faqs2.asp, line 13
If anyone could offer me any help, I would greatly appreciate it. Thank you.
View 4 Replies
View Related
Dec 11, 2005
I trying to build a usage tracker. Users will take a reading once a week and enter data. I want to open the form and have 2 fields filled in based off the last reading entered into the table. I have an ID field (autonumber) and I tried using that field -1 to populate my other fields but it does not work. any suggestions
jon
View 1 Replies
View Related
Jan 23, 2006
Ok, so I am creating an Access Database to track the progress of our collections staff. I need to pull data from a remote SQL database and filter it so that the appropriate records are appended to the appropriate tables in teh Access DB. Any ideas?
View 3 Replies
View Related
Feb 12, 2006
I have a column of data set up as follows:
Review July 2003
Review October 2003
Review July 2004
Review October 2004
Review July 2005
Review October 2005...and so on.
I know the data is not normalized, but if I want to use the Year part of the string in a WHERE clause, how would I do that? or in other words how do I extract the Year from the string.
Thanks
View 5 Replies
View Related
Dec 10, 2007
Hello all,
I would consider myself a novice to almost intermediate with access.
Anyways what I need to do seems pretty simple. I just need to make a web page that pulls values from a table we have stored on our server. The users WILL NOT need to modify the info, they simple need to view it.
I want it set up so that when users modify the table locally here at our company, people from another site can view the changes on the internet...
Thanks for your time!
View 1 Replies
View Related
Jun 20, 2007
I'm querying off of a teradata table in Access. I have the teradata table linked to a table I made in Access which will only pull specific cars(example). How can I make the query pull.. like car* for every record I have in the table?For example..My made table has20120220321Q24Retc...the teradata table shows this201G101201G102201P202203A12021QP131the record means ...the first 3 characters is the car name, the middle two char is the location, and the last 2 is the day of the week.Btw in the query I use in my other querying system it has an option "Begins With" which works, I don't know if acces has this? Can anyone assist me on this? If I am unclear let me know!!
View 14 Replies
View Related
Aug 10, 2007
I am having an issue pulling information from a form into a query. In my criteria column in the query i have:
[Forms]![frm_createcsv]![txtCriteria]
it pulls from a valid string from a textbox txtCriteria.
My vba code is:
Dim query as string
query = "pkg_not_registered_email"
filename = "C:querytester" & Format(Date, "YYYY_MMDD") & "_" & cboCountry.Value & "_" & ".csv"
DoCmd.TransferText acExportDelim, "", query, filename
DoCmd.Open query
____________________
This exact code worked previously with another function and a different query so I do not understand why it is not working now! Help! :(
View 7 Replies
View Related
Dec 17, 2007
I've linked access to an external database and created a query to pull results from the linked access table that was between certain times on certain dates (i.e. between 11/12/2007 11:01 AM to 12/13/2007 12:01 PM). The query I have thus far is "SELECT * FROM TABLE1 WHERE DATETIME >= #11/12/2007 11:01 AM# AND DATETIME <=#12/13/2007 12:01 PM#". That works, but I want the date and time to be changeable through text fields on a form. Something like "SELECT * FROM TABLE1 WHERE DATETIME >= #forms.form1.startdate forms.form1.starttime# AND DATETIME <= #forms.form1.stopdate forms.form1.stoptime#". The dates are going to be automatically generated according to other parameters but the times are going to be entered manually. How can I accomplish this?
View 1 Replies
View Related
Jan 25, 2008
Here is my issue I am having, With the records we are pulling it is not pulling everything from the previous 24 hours. It is using the "D" to pull the information, however it is also using the default system time, so if i have a record that occured last night at 8:30 pm it is not showing up.
How do i get all of the records from the last 24 hours regardless of system time?
View 14 Replies
View Related
Nov 14, 2005
Hi,
Here is my problem. I am trying to use a form to enter data that is contained on one table, have it pull data from another table that is related to the original data, then add data and dump the whole thing off to another table. I would like to do this one item at a time. The only way I can get this to work is to pull all the data at once into the form. Is there any way I can pull just the related data I need by just entering the item number?
Thanks,
D
View 1 Replies
View Related
Jun 22, 2006
I've got a form for a volunteer tracking database I am trying to create that has all the voluneer's infomation and has a subform in it that shows the volunteer's activies and hours. I have a text box (txtHours) on the subform with the following Control Source "=Sum([hours])", with the visible property set to no. This sums the total hours volunteered by the individual.
On the main form I have another text box (txtTotal) with the following control source "=Hours.Form!txtHours" where:
Hours is the Name of the subform and the Form!txtHours references the control on the subform.
I am trying to create another textbox that will display the total hours for all records in the form, but not having any success.
Any suggestions?
View 4 Replies
View Related
