Using an example:I have three tables; tbl_weight , tbl_height , tbl_bmi...How do I make tbl_bmi automatically use the weight and height values (height/ weight) to determine the tbl_bmi values? Is there a way to store code behind the tables as if I was in MS excel?
View RepliesI am developing a simple database for students to register courses using Microsoft Access 2010. I have 4 tables: Student, Register, Course, and Section (1 Course can have many Sections).
Then, there is a criteria that a student can only take up to 6 courses. Hence, may I know that where and how can I include this constraint? I believe that it should be in the Macro (Before Change) of the table Register...
My relationship is: Student -> Register <- Section <- Course
Hello,
When I add a butten using the wizard Access 2007 adds a macro instead of vba code.
How can I get the good old VBA code???
Thanks for your help in advance
I have 12,000 cvs that i need to get into An access database so i can start to extract email info etc. They are stored in one folder All Cvs under each of their names edc.txt (i have converted them to .txt) i want to create one table with two fields name (taken from the cv filename and contents (taken fromthe contents of the .txt file). I am using Access 2007.
View 2 Replies View Relatedfinding some way to import my tables from excel into access 2007 with comments still inside their boxes.
one of the columns in my table is called "Order No" and each field contains a Comment as a note to go with the order.
Is there a way to keep this setting when importing the tables into access 2007?
Not being a code person. This code worked great for 2003, but we just installed 2007. I get an error message when the this code runs:
Its a complie error
User-defined type not found
Sub ShowUserRosterMultipleUsers()
Dim cn As New ADODB.Connection.....red shows where I get the error message
Dim rs As New ADODB.Recordset
Dim i, j As Long
Set cn = CurrentProject.Connection
' The user roster is exposed as a provider-specific schema rowset
' in the Jet 4.0 OLE DB provider. You have to use a GUID to
' reference the schema, as provider-specific schemas are not
' listed in ADO's type library for schema rowsets
Set rs = cn.OpenSchema(adSchemaProviderSpecific, _
, "{947bb102-5d43-11d1-bdbf-00c04fb92675}")
'Output the list of all users in the current database.
Debug.Print rs.Fields(0).Name, "", rs.Fields(1).Name, _
"", rs.Fields(2).Name, rs.Fields(3).Name
While Not rs.EOF
Debug.Print rs.Fields(0), rs.Fields(1), _
rs.Fields(2), rs.Fields(3)
rs.MoveNext
Wend
End Sub
I have recently been modifying an existing Access 2007 database, everything seems to be working correctly, except that the main table holding most of the data is acting strangely.
If opened in database view, it is completely blank - no column headers, no data. Record count is correct and I can step through/select records, but there's just nothing visible at all.
The data clearly still exists as it can still be viewed in forms / queries / reports.
Only thing I can think of is that I have deleted a bunch of outdated queries & reports and it's possible that one or more of them may be cross-referenced with the table in another query, but still can't see why that should be causing this problem.
I have multiple tables that are linked to excel. I am creating a product selection tool to make it easy to find the products contained all these linked tables. They are necessary as they contain pricing data and information necessary to be kept in excel which is regularly updated.
Is there a way to create one table containing data from all these linked tables? I tried using an append query but realise that when the linked tables are updated the table containing all the data wont be?
I understand right off the bat if you're reaction is "don't duplicate data!!" -- mine would be too (don't fret, I know my normalization).
I've linked a table in my db to my Global Address Book in Outlook 2007 and, upon entering an employee number as a new record, would like to verify that the number entered is listed in the GAL and then pull in the associated name and location info.
The key is that I don't want this info to rely on the GAL going forward. For example, if an employee leaves or is no longer listed in the GAL, I don't want to lose the employee info (past data is needed for audit purposes). Note: I will be creating a report later to show if there are discrepancies between the GAL and my table, but that's another story...
So, what would be the best auto-fill options in Access 2007?
Iam using the following code for inserting the values from access form in to the access database table ITEMS, but iam getting compile errors, may i know where iam going wrong in the code.
Also help me in updating, deleting and viewing of records from database table ITEMS to the form when i run the program.
Following is my code :
Private Sub ADD_Click()
On Error GoTo Err_ADD_Click
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Set cn = CurrentProject.AccessConnection
'Create an instance of the ADO Recordset class, and
'set its properties
Set rs = New ADODB.Recordset
With rs
Set .ActiveConnection = cn
.Source = "SELECT * FROM ITEMS"
.LockType = adLockOptimistic
.CursorType = adOpenKeyset
.CursorLocation = adUseServer
.Open
End With
'Set the form's Recordset property to the ADO recordset
DoCmd.RunSQL "INSERT INTO ITEMS(ITEM_CODE, ITEM_NAME, ITEM_CATEGORY) VALUES('" & ITEM_CODE.Text & "','" & ITEM_NAME.Text & "','" & CATEGORY.Text & "')"
Set Me.Recordset = rs
Set rs = Nothing
Set cn = Nothing
Exit_ADD_Click:
Exit Sub
Err_ADD_Click:
MsgBox Err.Description
Resume Exit_ADD_Click
End Sub
compile ERROR as follows:
you can't reference a property or method for a contro unless the control has the focus.
I am doing an assignment for uni and need to be able to autofill a textbox with the price of a service based on whether a checkbox, detailing whether the invoice has been paid, is ticked. I found the following formula which works: =IIf([Invoicepaid]=True,[ServPrice],0).
I put this into the control source box on my form but the only problem im having is that the price of the service is not being updated into the actual invoice table.
i have a database in access 2003 when i open it with access 2003 it shows data in table but when i open same table in access 2007 it shows only header rows , no data
how can i see this data into access 2007 or excel 2007.i want to link these table data with excel 2007 or access 2007 but with above problem i can't do it
Hi,
I need to know is there any specific code that would establish link for tables from Access BE?
I know it using Get External Data...Link Tables. Even though they are in other db but it leads to increase heavy size of main db. I want no table objects (except system tables) to be displayed in main db and only link tables once main db activates and should no table remain exists in FE after closing.
There should be some way to establish connectivity of tables from Access BE at the time of opening main db . This will help a ton to reduce the size of main db and its zip file can be copied even in a 1.44 mb floppy.
I heard something about shell but exactly I don't know how to do it.
Any idea....
With kind regards,
Ashfaque
On trying to import an Excel 2007 file into Access 2007 I get the following:
1) Choose "External Data," Import, Exce
2) Select small file in MS Excel 2007 format.
3) Click on Import the source data into a new table ...
4) Choose OK
Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.
Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.
Event Viewer gives following message, which is of no help:
"ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."
Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.
I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.
I have turned off DEP.
How can I get MS Access 2007 to import Excel?
Thanks
Ken
i have started to try putting the concrete records i keep on excel into microsoft acces. for each record, i need to make note of the vehicle registration numbers. what is the best way of doing this? if it is possible
Thanks
I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features.
Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing!
Help!
I do have Runtime 2002 (XP) on the same PC, is that relevant?
NOTE: Im working in MS Access 2003, only results in this SQL/database (not mysyl, MSSQL etc)
I want to be able to ORDER an SQL query and put the NULL values last.
I have a basic databse:
Table name: PeopleTable
Field names: TableID, PersonField, PersonID
The aim is to order by PersonID and put the NULL values last
See pic1.jpg;
The picture (pic1.jpg) shows the database as it is without a query.
See pic2.jpg;
Picture 2 (pic2.jpg) shows the query results when I use the orderby statement (SELECT * FROM PeopleTable ORDER BY PersonID As you can see it shows the results ordered by the PersonID however the NULL values are first.
See pic3.jpg
Desired results, it is ordered by the PeronID and the NULL values are last (NOTE this is an editied screenshot).How can i achieve this is MS Access 2003?
I have a database that had some code that enabled the user to click a button and it would take information from one Access query or table and paste it into specific locations in Excel. This is important because the last worksheet has specific formatting in place.
If it didn't, I'd just use the transfer spreadsheet option and not even bother opening Excel at all with code.
I've got it working well except for the last part. The last query being copied has eight records and only one is being sent to Excel. Same code as the other queries where all of their data is going to the right spot in Excel with the right number of records.
Private Sub AM_Top_25_Click()
DoCmd.SetWarnings False
DoCmd.OpenQuery "delete_ShortPartItems", acNormal, acEdit
DoCmd.OpenQuery "append_to_Short_Part_Items", acNormal, acEdit
[Code] .....
has anyone had a problem with copying tables from one database to another -- it used to be so easy by just dragging from one database to another but in 2007 this isnt possible -- it seems to want to delete records rather than copy over - am i missing a setting to allow this?
View 1 Replies View RelatedHello,
I have installed Microsoft Access 2003 and Microsoft Access 2003 Developer Extensions. I can create Access application by using the Package Wizard.
But after I upgrade from Microsoft Access 2003 to Microsoft Access 2007.
I can't use the Package Wizard.
How can I do to solve this?
Thanks.
Attached is a screenshot of the relationships in a database I built a couple of years ago. It's worked absolutely fine in Access 2003 and currently has over 18,000 customers with associated information in it.
However, when I open the database in Access 2007 the performance is awful. All the forms are very slow to respond when tabbing between form elements. I've experimented by reducing the number of form elements calling on related data on a given page and whilst this improves performance it reduces usability - something I don't want to compromise on especially since Access 2007 should be able to cope with this.
My next question is therefore whether I've got the most efficient underlying table design and I can't see any other way of doing it than my current method so I'd be grateful for any feedback or advice anyone has.
how to import data from excel 2007 like' suppose the field in DB table is A, B & C and the same is there in excel 2007, now i like to get B & C filed data from excel to DB table directly (import) which may be through button at form, because i have given my user the accdr file so they cann't go into the table and paste record.
View 1 Replies View RelatedHi All,
Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).
Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.
I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.
Having a problem here after installing 2007. All my previously created databases work fine in 2007 (after clicking the enable, which is a pain,but don't know any other way) When I return to 2002 and try to open the databases I get different errors all something like this on....... "The expression On Open you entered as the event property setting produced the following error: Object or class does not support the set of events. Whats up here?????I have found a site here...http://allenbrowne.com/bug-17.htmlMentions this problem,but refers to Vista..... Does the same apply to XP? And which is the best fix?
View 7 Replies View RelatedHi
I have an Access 2000/2003 database which opens up and displays correctly in Access 2007, but when I go to use the File>Print command, or for that matter any of the other pull down menu's nothing happens?
Has anyone else experienced thisproblem, or does anyone know what I am doing wrong?
Any help greatly appreciated.
Thanks
Steve
I recently upgraded from MS Access 2007 to 2010. I want to copy table preferences from the 2007 version into the 2010 version using the Import funtion. Will all of my queries, forms and reports remain compatible?
View 2 Replies View Related