I have just upgraded from Access 2003 to 2010. Now I'm trying to relearn some of the small things I used to be able to. In 2003, I could just have a table highlighted and select "Insert, Query". It would then open a query design with that table. Is this possible to do this in 2010? Or do you have to open query design then add the table manually?
View RepliesI have played with this problem for 3 days and have come close but not quite solved it. My problem, I have several drivers delivering several orders, the orders are named 101, 102 and so on lets say to 150. Due to locations of the drivers, some deliver more orders then others. I want to be able to create a report that looks like
"Driver #1 101 - 106"
"Driver #2 107 - 110"
Driver 1 delivered 6 orders. Driver #2 delivered 4 orders and so on.
I have tried the 'count" which gives me the number of orders per driver but having trouble figure out the design of the calculation in the query.
I have a table that has one field and I want to use this field as a query criteria . when i click on CRITERIA & BUILD, Access lets me select the table field and shows [tblBillRun]![Bill_Run] for the criteria but when I click RUN, it prompts me to ENTER PARAMETER VALUE. What am i doing wrong?
View 3 Replies View RelatedFor some reason our database keeps "not responding" ...
The application stops responding when:A field is selected that has a input mask
A combo box is highlighted (forcing the drop-down menu to open)
Certain buttons are pressed (in fact all but two trigger not responding, why the two buttons are immune)
if I put a break point on a section of code that runs when I press a button (any button, it doesnt matter) and I then press the button which takes me to VBA, to the break point. Then I press F5 to continue to run the code until the function ends (essentially doing nothing, just running the code to the soonest break point I can in the function and then running the rest of the code as normal...) it all works fine again!!!!
I fixed the issue by creating the function:
Code:
Sub aiuewjgaop()
End Sub
saved the database, deleted the function and then saved the database again.
I am using Access 2010. How do I prevent the object typed into the textbox on a queryform being written to the table. The result from the name typed into the textbox on my query form correctly produces the result from the query, and my macros then produce the correct report, which I can either print or close due to the controls in the heading of the report. However, when I view the table, the name typed (only) has been inserted into the correct field as a new record in the table. Is there a macro I can add (I assume to an event in the query form) to prevent this happening?
View 8 Replies View RelatedI have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.
Tab1, listbox1:Field1, Field2, Field3, Field4
Tab2, listbox2, Field1,Field2, Field5, Field6
Tab3, listbox3:Field1, Field2, Field7, Field8,Field9
I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.
I hid a query and now need to modify the fields, how can I unhide the Query in 2010?
View 1 Replies View Relatedand I have several queres using the same table. I was trying to add 2 columns and fields to my 1 querie. I do not use program much but I have it for my cattle. SO I was clicking around. Went to Table and went to add the field.I changed my Primary Key field then realized I should not have done that.I changed it back to "ID" and "Number" and added my fields. THEN I went to the one querie and added my columns and fields.However NOW the one querie I messed with has 30,888 rows as it just repeats the 20 or so rows over and over .The other queries do not and they use some of the same data "ROWS" from the table
View 1 Replies View RelatedHere is my project: For a duty plan the employees are assigned to positions in a certain area.
For example:
Name. Position. Description. Map
Brown. 1. backdoor. 1
Miller. 3. frontdoor. 1
Norman. 4. left wing. 2
Hoover. 6. right door. 2
....
Now I want to show the positions within circles on the maps, with the names within dynamically, as the employees change every week.
The coordinates of the positions do not change, but not every position is needed in every duty plan.
So, my idea is to draw all possible shapes on all possible maps and make them visible or not depending on the assignement.
The duty plan is my table in access and looping through all records I would like to fill the needed shapes.
All maps are on slides (40 slides and about 400 positions) and should be filled accordingly.
I can open my presentation, although I only could do it by late binding ( a reference to ppt 14 obj. Lib fails with an error!! - why??) but I cannot any solution how to loop through the records and do the job.
I am working in Access 2010, trying to create a report with a pie chart. The pie chart is based on a query (called Count Pie) that calculates three values:
% IS
% NetInf
% IS + NetInf
I go into Create, Report Design and get a blank report in Design View. I select Chart from the Controls tab and follow the Wizard to specify the data source.
I get a pie chart with the right title (Count Pie). I double-click on the chart to open the report Datasheet and insert the correct value names. My pie chart in Design View looks correct. It has the right title and legend, and shows three slices of the pie corresponding to the three values.
I save the report, and go to Print Preview, where I get a pie chart that looks like a single circle; it has no legend, and doesn't show the three values.
Do I need to have the Access 2010 application re-installed?
I am using access 2010 and am trying to create a dynamic search like the one google uses, it will feature a drop down that will populate with results but when its not in use the drop down is not shown.
I'm looking to add a menu system to the form its self so that the users will be able to do certain functions. third image is what I'm looking to create with the menu bar at the top of the screen.
[URL]
I am currently using INNER JOIN and GROUP BY to narrow down the RowSource of a combo box based on the value selected in the active combo box where the code is located "onClick".
The value being selected is a StoreID, This ID is matched against the AssetRegister to find all group names, The GroupID and GroupName are then retrieved from the AssetGroup table, then finally the list is grouped on the Group ID and Group Name.
I have tested this query in SQL Server Management Studio and it works without any issues, however when I use it as an inline query to adjust the row source of the combo box it returns no values.
Here is the SQL query:
Code:
SELECT AssetGroup.ID, AssetGroup.GroupName
FROM AssetGroup
INNER JOIN
(SELECT AssetRegister.AssetGroup, AssetRegister.Store
FROM AssetRegister
WHERE AssetRegister.Store=7) AS ar ON (ar.AssetGroup = AssetGroup.ID)
INNER JOIN Store ON Store.ID = ar.Store
GROUP BY AssetGroup.ID, AssetGroup.GroupName ORDER BY AssetGroup.GroupName
And here is the inline query applied to the RowSource:
Code:
AssetGroup.RowSource = "SELECT AssetGroup.ID, AssetGroup.GroupName FROM AssetGroup INNER JOIN " _
& "(SELECT AssetRegister.AssetGroup, AssetRegister.Store FROM AssetRegister WHERE AssetRegister.Store=" & StoreID & ") AS ar ON (ar.AssetGroup = AssetGroup.ID) " _
& "INNER JOIN Store ON Store.ID = ar.Store GROUP BY AssetGroup.ID, AssetGroup.GroupName ORDER BY AssetGroup.GroupName"
AssetGroup.Requery
Access 2010. This has worked before but I don't understand why this is not working for me now. When i select an item in a combo box in a form and click on a button to run a query with the results, the query is blank. If I run the query alone, it prompts for an item, I can type it in and it works. I have even tried the DoCmd on the combo box but still same results. Attached is a dummy down DB. If you run the query, it will prompt, select Paper or Rock, see results. But run the form, the drop down will not show the results. What am I missing?
View 3 Replies View RelatedI have this Access file with Tables & Queries.
I want selected queries to appear in RED colour and if possible BOLD too.
Possible ?
Why Access (2010) database is creating backup copy by itself?
View 2 Replies View RelatedI am trying to create a database to manage IT assets, most of the structure is done, I'm now trying to get the details done.
The issue I am currently trying to tackle is to get a control button on one form to create a new record in the sub form that sits in the main form via another pop-up form.
So I have :
>PeripheralsViewForm - that has 4 control buttons (Edit Quantity, Edit Description,Add an Item and Exit)
>> PeripheralsSubForm - (Datasheet) which is referenced to PeripheralsQuery
The Edit Quantity and Edit Description open a separate form which allows the user to update only the quantity or description respectively (I have done it this way rather than allowing edits in the data sheet as I feel that it is too easy to hit a key incorrectly and overwrite data in the datasheet view) Both of these functions work perfectly (to my amazement) - I am using the id field in the subform to link to the pop-up form which then has unbound text input boxes, which I then write back to the subform.
e.g from edit button on click event: DoCmd.OpenForm "perquantform", , , " ID=" & Form.PeripheralsSubForm!ID and then from the pop-up form "perquantform" on the "Exit & Save" button I have :
Forms!peripheralsViewForm.PeripheralsSubForm.Form! Quantity = Me.newquant DoCmd.Close acForm, "perquantform", acSaveYes
This allows the user to select the record in the datasheet form and then click either the change quantity or description button.Also also the other reason I did it this way was because I just couldn't get the subform to requery when I had the two edit popups linked to the table or query.
The problem now is that when I click on the "Add an Item" button, it overwrites whatever record is currently selected !
The code I have is this:
From the "Add an Item" button on click action:
DoCmd.GoToRecord , Forms!peripheralsViewForm!PeripheralsSubForm.Form! , acNewRec
DoCmd.OpenForm "addperform"
And from the form "addperform" - "Save & Exit" button on click action:
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerType = Me.pertypedrop
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerMake = Me.permakedrop
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerModel = Me.newmodel
Forms!peripheralsViewForm.PeripheralsSubForm.Form! PerDescription = Me.newdescription
Forms!peripheralsViewForm.PeripheralsSubForm.Form! Quantity = Me.newquantity
DoCmd.OpenForm "PeripheralsViewForm"
DoCmd.Close acForm, "addperform"
--------------------------------------
the line "DoCmd.GoToRecord , Forms!peripheralsViewForm!PeripheralsSubForm.Form! , acNewRec" is what I have added to try to solve the overwrite issue, but when I run this it comes up with the error :
"runtime error 2498 - An expression you entered is the wrong data type for one of the arguments"
I have put this line in the "addperform" exit action and it comes up with the same sort of error.
Using Access 2010.
I am trying to create a columnar report that relies on information that are expressions in various queries. Unfortunately, I can't seem to create them in one query because the criteria is mutually exclusive. I used the report wizard to start the report based on the single expression in the first query. Now I want to start adding the other data but I can't seem to get it to work. All I really want to do is include fields that have the have the value, which is already summed, from the other query. When I try that I get error messages like "you tried to execute a query that does not include the specified expression 'expressionName' as part of an aggregate function' and it just goes further downhill from there. What is the easiest way to get this simple values into the report? Is there a way I can create a field in the report that uses a SQL statement for just that field so I don't have to have the report linking to 50 different queries?
View 14 Replies View RelatedI am using an Access 2003 database to create a Word report that contains Graphs. We have since moved to Office 2010, and now the vba code will not select the graph and populate the data, i presume this is because the data is no longer in a datasheet but Excel itself.
View 2 Replies View RelatedI've been writing queries in the following format for years in Access 2003, but having recently transistioned to Access 2010, I've found the following sql doesn't work.transform
sum(s.value)
SELECT
s.sn, s.ln, s.pn, s.id, s.lat, s.point, s.supply_type, s.used, s.real, s.code, c.name
FROM
supply_points s
, codes c
WHERE
s.code = c.code
and s.id is not null
and s.code = 1075
and s.month >=[forms]![main]![gppstart ]
group by
s.sn, s.ln, s.pn, s.id, s.lat, s.point, s.supply_type, s.used, s.real, s.code, c.name
pivot
s.month
In Access 2010, this query returns the following error message:the Microsoft Access database does not recognize '[forms]![main]![gppstart]' as a valid field name or expression
Is this a common phenomena in Access 2010?
How do you put the Month on a form based on the data in a query?
View 1 Replies View RelatedI am trying to create a Cascading Combo Box for my Form in Access 2010. I ahve written the code:
Private Sub Combo11_AfterUpdate()
cboCombo13.RowSource = "Select TblAcc.SubFamily " & _
"FROM me.TblAcc " & _
"WHERE me.TblAcc.Family = '" & cboCombo13.Value & "' " & _
"ORDER BY me.TblAcc.SubFamily;"
End Sub
But keep getting the same "Run time error message 424: Object required"
And when I define the error it says "Identifier under cursor is not recognized" (the yellow arrow comes up and is pointing at the "ORDER BY" line.
I would like Combo Box 13 to give me the SubFamilies of the certain Families choosen from Combo Box 11. (Each Family has different SubFamilies). But if I ignore the error, Combo Box 11 lets me choose a Family and Combo Box 13 gives me options to choose any SubFamily in my DB.
is their a way to have a query to only show data on every monday in current month.
Month([datefield])=Month(Now()) And DateAdd("d",7,[datefield])
I am trying to work with Access 2010 to do some pretty simple stuff. I have two tables, one with around 500k rows, the other with around 150k rows. There aren't too many columns, less or around 20 for each table.
I am just trying to do a simple inner join and then create a table but every single time I do it gets about 20% done on the status bar in the bottom right and just hangs. The query itself takes no time to run but it can't create it as a table. Same thing happens if I try to export the query.
Tried to find things but being a mix of a couple of different actions havn't been able to actually find it
So basically I found a awesome form somewhere that builds the SQL query based on all the users selections.
When you hit the create button it will save the query and update the sub data sheet below with your query results.
From here the part I'm lost on is getting the TOP x number of records and moving them to a new table, I wanted it to work on the 2 drop down boxes that are on the form. select your values and hit the button.
I'd imagine it would be a sub query that I'd use for the top x like I have in the past but I just can't seem to get it to work
Quick steps
1. create your query
2. check your data in the sub datasheet
3. decide the number of records to move to the new table
4. select the name
5. hit the button
This would copy the ban, xcv & dfs fields from the importeddata table to the moverecordshere table & also update persname in the moverecordshere table with the name selected in the form.
Sample db attached ....
I have three Queries and I need to export three queries into one workbook but different worksheet,
Currently I am using ExportWithFormatting , but the result came out is three different workbook .
Is there any way I can export to one workbook ?
I have two queries, one base upon the other. I would like to combine them (If Possible) into one query so I can embed them into a form or report. I have tried without success at finding the answer on the forum as well as searching the web.
The table lists employee numbers and dates they worked. I need a count of how many employees worked each year, based upon the paycheck date, not the actual date worked. Pay check dates are two weeks apart. An extreme example, is the first pay check date of 2010 was on 1/1/2010, but all the days worked were in 2009, this would have to be included in 2010 not 2009(See the query for further date calculation understanding). Anyway, the date calculations are not the issue here.
I only have one table, so if I am not mistaken, I can't use the WHERE (SELECT... JOIN) feature. I also was unsuccessful at using SQL DISTINCT.
I am running ACCESS 2010 Tables are ACCESS 2007.
OS is Windows 7 Ultimate.
I have included a same database with the queries. qryEmployeesAnually2 is the results I am trying to achieve.