Queries :: Access Database - Query Based On Multiple Day / Date Criteria

Jul 26, 2015

I am currently working on a project to develop an access database to manage a roster of calls to clients on a daily basis based on two general criteria:

1. Pre-determined days selected by the client. (e.g. Call Mon, Wed, Fri only. This can change as client requirements change.)

2. Ad-hoc changes based on the client’s circumstances. (e.g. No call from 27/7/2015 to 29/7/ 2015)

I have managed to successfully deal with the second of these with the following expression in a query:

CallToday?: IIf((Date()>=[NoCallFrom] And Date()<=[NoCallTo]),"No","Yes")

However dealing with the first is a little more difficult to work out. I have tried a multivalue lookup field with multiple days selectable, but constructing an IIF query to deal with these multiple values is proving quite a challenge.

I am thinking of using a table with days of the week and a junction table to allow the multi-selection, but I may need constructing the relationships and the query here.

View Replies


ADVERTISEMENT

Queries :: Drawing Register Database - Lookup Specific Criteria Based On Date

Aug 11, 2014

I have a drawing register database which notes the revisions for all drawings issued. One drawing can be revised several times so I have a details table which notes the revision letter, date issued and the notes for each revision. Using this table I created a max date query to show the latest issue date and revision for each drawing. This query is used for a transmittal form for issuing drawings. Both the form and report is working perfectly.

The TBLTransmittal consists of the following fields
ContractName
IssueDate
SubSup
DwgNo (multi-value checkbox)

Using the TBLDwgRegisterDtls or the query QRYDtldDwgReg (which includes the drawing titles) I would like to create a query that would look up the latest revision at the date of issue and show the revision letter.

I started a query combining TBLTransmittal and TBLDwgRegisterDtls and in the criteria for DateIssued of the TBLSDwgRegisterDtls (which is when the drawing was issued by the architect to the contractor) I put "Not > [IssueDate]". This is filtering the information to show revisions issued up to the date we (the contractor) issued the drawing to our sub-contractor but I need now to pull the max revision only from this information.

Before I go I will give you an example of what I want from the end result

Drawing BK2-02 rev. D was issued by the architect to the contractor on July 17th. This drawing was in-turn issued to our sub-contractor (Sub "A") this Saturday, August 9th. The same drawing was revised this morning and rev. E was issued to Sub "A" today, August 11th.

I want the end report to show that Sub A received Rev. D on 09-08-14 and Rev. E on 11-08-14.

I'm wondering if another max date query on this new query would work? I'll try and see what happens.

View 2 Replies View Related

Queries :: Filter Query Based On Some Criteria In Multiple Columns

Jul 25, 2013

I am working in MS access 2007.

What I am trying to do is fairly simple i just dont have the ability to correctly code what i want to do.

I want to filter my query based on some criteria in multiple columns. But i only want the query to filter based on the specific criteria if a checkbox has been selected.

Basically i want the criteria for one of the columns criteria to read

IF a check box "Check0" is selected THEN filter the column to only records that = 1 and if "Check2" then filter all records that = 2

View 5 Replies View Related

Access Query To Filter Out List Based On Multiple Row Criteria From Another Table

May 10, 2014

I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.

I want to create a query to filter websites list which does not have values or characters from table b.

I have these values in table B that I want to be filtered out or not shown in my URL Select Query

.org
.gov
.du
.pk
.dk

I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.

Below is what I have tried but in vain and it says atmost you can atmost one criteria row in sub query

SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));

View 9 Replies View Related

General :: Access Query To Filter Out List Based On Multiple Row Criteria From Another Table

May 10, 2014

I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.

I want to create a query to filter websites list which does not have values or characters from table b.

I have these values in table B that I want to be filtered out or not shown in my URL Select Query

.org
.gov
.du
.pk
.dk

I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.

SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));

View 3 Replies View Related

Queries :: How To Count Records Based On Multiple Criteria From Multiple Tables

Jan 4, 2014

I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".

View 4 Replies View Related

Queries :: Sum Values Based On Multiple Criteria

Aug 12, 2013

If I want to sum the percentages from April, May and June only if a column is Not Null, how would I do that?

example

Tbl 1
PK, Month
Percent

Tbl 2
FK, Month Enrolled
Qty of Rx in the 1st month enrolled
Qty of Rx in 2nd qtr
Base (if Qty of Rx in 2nd Qtr is null then Qty of Rx in 1st month enrolled)

If Qty of Rx in 2nd QTR is NOT NULL then QTY of Rx in 2nd Qtr * Sum of April Percent+May Percent+June Percent, otherwise Qty of Rx in 1st month enrolled * Month Percent

Im getting stuck on how to sum the percents of April, May and June and then multiplying the result times the Qty ONLY IF the field is not null.

I only know how to create Query's using the design mode. I dont know how to write SQL statements.

View 1 Replies View Related

Queries :: Query To Run Before Report Based On Criteria Based From Two Combo Boxes On Form

Mar 20, 2013

I have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.

View 3 Replies View Related

Query Based On Multiple Criteria With Check Box's

Nov 18, 2004

I have a table(Product Change) with these fields:
Tracking Number
Approved (a check box)
Engineering (text box that represents department)
Purchasing (text box that represents department)
Quality (text box that represents department)
Production (text box that represents department)
Customer Service (text box that represents department)

I want my query results to show all records that have the "Approved" check box...checked, and then only the records that have one of the Department fields with a null value.
So I'm looking to see only records that are "Approved" and out of those....only the records with at least one department field empty(Null).

Any help doing this is SQL view would be great...or even design view.

View 2 Replies View Related

Queries :: Reports Database By Date And Criteria?

Jun 24, 2014

I have a report database that provides my company with clients that took our training modules and notify us of which clients completed our trainings.The clients can complete training in 3 States and "Passed" means they are good to go.

I download an excel report daily and import it to Access on a daily basis. Problem is the Report is over 8,000 rows long and basically I just need the clients that completed training within past 48 hours. The excel report provides a date of completion.

code that only pulls those clients that "Passed" within the last 48 Hours. Here is my SQL Statement I use on the RecordSource.

SELECT report.SPS, report.FirstName, report.region, report.id, report.AZ_Cert, report.AZStatus, report.CA_CERT, report.CAStatus, report.OR_CERT, report.ORStatus, report.Completed FROM report WHERE (((report.Completed)=False));

The completed checkbox removes the record from the cert queue. How can I do this more efficiently? I think I have it right.

Private Sub Completed_Click()
Const cstrPrompt As String = _
"Are you sure you want to complete this record? Yes/No"
If MsgBox(cstrPrompt, vbQuestion + vbYesNo) = vbYes Then
If Me.Dirty Then
Me.Dirty = False ' save the record
Forms!frmRecertView.subfrmRecert.Requery
End If
End If
End Sub

View 6 Replies View Related

Query Criteria Based On An Input Date

Oct 2, 2006

I have a database with the following information:

FTA # Date Attended Last name First name assigned person......

Each week I need to generate a report that shows the people that attended for that week, grouped by the assigned person. I only want to show the data for a specific "date attended" (i.e. that days date). I figured I first need to generate a query that only returns the data for that specific date in the "date attended" column. I did that but it is manuel by using the criteria field.

Is there an easy way to type in the date that I want the query to use as the criteria?

Thanks
:o

View 14 Replies View Related

Query Based On Date Criteria Filter

Apr 21, 2008

Below is the SQL I have on a Union Query. Each Query is
based on a date range. The first Query date is Planned
Immplementation Date. The second Query date is Revised
Planned Implementation Date. If the Date in the Revised
Planned Implementation Date is higher than the EndDateTxt
Date Range I do not want the results to appear for that
ECN. Any suggestions on how to accomplish this?

SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process]
FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID]
WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes"))
ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number]
UNION SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process]
FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID]
WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Revised Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes"))
ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number];

View 5 Replies View Related

Form Based Parameter Query With Multiple Controls Used For One Criteria

Nov 14, 2012

My form-based search mechanism uses controls to set the parameters for the query data source.

I have one field call quantity in stock. I could you a Between and And method to allow the end user to input the stock quantity they want.

HOWEVER, i would love it for the user to first select the Comparison Operator (e.g. > , <, >=, <=) from a combo box and then in an adjacent text box, enter the quantity.

The expression i entered in the query goes something like this.... Forms![frmSearch]![cboRange] & [Forms]![frmSearch]![txtQuantity]

When i try and run this, i get the message "THe expression is too complex to be evaluated".

View 5 Replies View Related

Modules & VBA :: Exporting Multiple Queries Based On Date Range

Aug 29, 2013

I have recently set up a button that exports multiple queries to one Excel file, using TransferSpreadsheet code. This works great and saves a lot of time, the only thing is on many of the queries I have a date range set, so you have to enter a date range to get the results.

Is there away that once I press the button I enter the date range once and than it exports the rest of the data based on this range, rather than entering the same dates multiple times.

View 1 Replies View Related

Problem Running A Query Based On Date Criteria Over Previous 7 Day

Mar 19, 2008

Hello All,

I do hope somebody can help this newbie :)

Please except apologies if I sound a bit ignorant with this but I'm complete novice with Access...

Basically I have a table with the fields Name - Date - Location I need to extract info from the table based on the location field.

i.e. return Name if a specified location exists and another specified location does not. This was real pain in itself and in the end I had to run two seperate queries which returned NAmes where each of the chosen locations exist. I've then created an additional query which compares the two sub-queries and iliminates Names that appear in sub query 2.

I do hope this make's sense I'm starting to confuse myself.....

Anyway, my problem is with the date field... I have to specify a date in order to get the correct info as the results may change on a daily basis... i.e. somebody may use both locations one day, but just the one location the next. However the eventual report which I need to generate is based on criteria over the previous 7 days, although if I use this criteria in my query in completely messes up the results.

So, what I was hoping that I could do is somehow automate my query to run 7 times (once for each of the previous 7 days) and then to combine the results of the 7 queries into a single query or report...

Failing that, could anybody think of any simple way of achieving this... or will be a case of having settle for a seperate report for each day?

Any help would be hugely appreciated... once again apologies for the explaination... It porobably makes no sense at all.

Regards,

Andrew

View 2 Replies View Related

Queries :: Set Criteria On A Query Based On If A Form Is Open Or Not?

Jun 18, 2015

What I want to do is set the criteria of a query to the value on a form if the form is open, and set it to a different value if the form is closed. I tried using a function on the OnLoad event of the form to set a variable called IsOpen to 1 if the form is open, and reset that variable to 0 when the form closes, but when I tried using the variable in an IIF statement in the query criteria, I got a "Its too complex" error.

Here's what I really want to do. I have a very complex form with multiple tabs and subforms. The subforms populate based on a query of what is selected and loaded into a textbox control on the first tab of the form. The first tab has a subform that is based on the main table. Rather than recreate that form, I want to copy it and change the rowsource on the first tab to a subset of the main table, and tell the query to use the textbox on the new form so I don't have to go and replicate all the other subforms. Is there a way to do that or am I just screwed?

View 3 Replies View Related

Queries :: Use Switch In Query Criteria Based On Combo Box

May 15, 2013

On I form I have a combo box called cboMobileStatus.Its row source type is "Value List".The row source is: 1;" All";2;"Has";3;"None".I have a query based on table "tblCustomerContacts" and I want to limit the records returned based on the value of the combo box.So if the user selects:

* All (1) I want all records returned.
* Has (2) I only want records that have a mobile number returned
* None (3) I only want records that do not have a mobile number returned

The field mobile is text (to keep the leading 0)I thought of using the Switch function in the criteria of the query for field Mobile like this:

Code:
Switch([Forms]![frmPrintCustomer]![cboMobileStatus]=1,([tblCustomerContacts].[Mobile]) Like "*",[Forms]![frmPrintCustomer]![cboMobileStatus]=2,([tblCustomerContacts].[Mobile]) Is Not Null,[Forms]![frmPrintCustomer]![cboMobileStatus]=3,([tblCustomerContacts].[Mobile]) Is Null)

but the query does not like it!Am I on the right track, and if so, how should I modify the code?

View 2 Replies View Related

Queries :: IIF Statement In Query Criteria Based On Check Box

Jun 19, 2014

I have a form with a check box. A query is run that looks at that check box and decides what the criteria are based on that. So, if the check box is checked, it should pull in all data in the field that is a Y. If it is not checked, i want it to pull all data (Y's and N's and blanks).

here is my criteria:

IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","*")

This does not seem to work. I have also tried:

IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y",Like "*")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","like "*"")

View 14 Replies View Related

Queries :: Multiple Criteria In A Query

Sep 16, 2013

I want to create a query with multiple conditions. Basically if the person Passes any of this trainings they need to show up in my query..how do you do it?

SELECT tblMasterUsers.userid, tblMasterUsers.Licenses, tblMasterUsers.firstname, tblMasterUsers.lastname, tblMasterUsers.email, tblMasterUsers.npn, tblMasterUsers.Region, tblMasterUsers.ABSID, CMPreport2014.[Ahip status], CMPreport2014.[LP Status] AS [AZ Product Training], CMPreport2014.[LP Status1] AS [CA Product Training], CMPreport2014.[LP Status2] AS [OR WA Product Training], CMPreport2014.[LP Status3] AS [Fraud Waster Abuse],

[code]....

View 1 Replies View Related

Queries :: CheckBox On SubForm Based On Query To Toggle Criteria

Aug 16, 2013

I have a SubForm "assignments" based on a Query, which has criteria to filter dates and also to filter 0 and 1 of the checkbox ...

The question is:

How do I put in that SubForm one or more Checkbox to "enable" and "disable", only the criteria of such query? So, toggle, for example, those jobs that are not completed (Checkbox of the query=0) and those that do ...

View 1 Replies View Related

Queries :: Enable Or Disable Criteria In A Query Based On Value Of Textbox?

Apr 20, 2015

Is there a way in access, through vba or any other means, which would allow me to either enable or disable criteria in a query based on the value of textbox??

Like i have a query that displays bookings customer has made between two dates, so i made a query and in the starting and ending date fields i get the value from form. In case if the use does not enter ending date, i would like to run the query with starting date only that displays booking made after the starting date.

Currently the starting date criteria is set to a textbox of form, and so is ending date. So if customer selects 1st April 2015 as starting date and 30th April 2015 as ending date the query should display the bookings between 1st and 30th of April. And if the user enters only 1st April in starting date it should display bookings starting from 1st April onward.

View 3 Replies View Related

Queries :: Setting Criteria For Query Based On 3 Combo Boxes

Jul 10, 2013

Ok so im working in MS Access 2007.

I want to create a query based on 3 combo boxes but have it so that if the field in the second or third combo box is not populated the query still runs.

Right now i have the Criteria set for the three columns that i wish to sort by as seen below.

Column 1
Criteria: [Forms]![Entity Selection Form]![areabox2]

Column 2
Criteria: [Forms]![Entity Selection Form]![devbox2]

Column 3
Criteria: [Forms]![Entity Selection Form]![entitybox2]

This gives me the correct query result but im forced to make a selection from each combo box. Is there a way to progamme it so that if I only make a selection from the first combobox and leave the others blank i can still get results in a query?

View 2 Replies View Related

Queries :: Multiple Criteria In DLookup Query

Apr 23, 2013

I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:

Employee Table) has the fields: Name, Type, Salary

Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:

Code:

Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")

I can get the first criteria to work but can't get the second part to work - currently it produces an error.

View 1 Replies View Related

Queries :: Using Multiple Criteria DLookups For A Query

Mar 29, 2014

I am working with a database which contains dates and a measurement value with data within the following fields:-

Record
SurveyID
DateTimez
mX
mY
mZ

Here is an snapshot of my main table "SurveyData"

Record|SurveyID|DateTimez|mX|mY|mZ
7194|A2|16-Mar-14|12797.4815|25781.8672|81.1848
7195|A2|17-Mar-14|12797.4863|25781.8672|81.1867
7196|A2|18-Mar-14|12797.4907|25781.8698|81.1875
7197|A2|19-Mar-14|12797.4844|25781.8642|81.1846
7198|A2|18-Mar-14|12797.4883|25781.8646|81.186
7199|G23|21-Mar-14|12419.8779|24822.6836|132.6177
7200|G23|12-Mar-14|12419.8928|24822.6812|132.6075
7201|G23|13-Mar-14|12419.9211|24822.6829|132.5915
7202|G23|14-Mar-14|12419.9392|24822.6837|132.5795
7203|G23|15-Mar-14|12419.9581|24822.684|132.5662

Record is the primary key which is a auto increment integer. The Survey ID is a text field that contains the name of the survey sensor, DateTimez is, we the Date and the time of survey and mX is the X coordinate. There is also mY and mZ, but once I can do the mE then its just a matter of duplication.

Now, I am trying to develop a query that will add some additional calculated fields to calculate the difference between the mX coordinates from the previous pickup, which is called 'dX'. The code will be duplicated to calculate the dY and dZ. I have managed to solve this using a Dlookup statement as follows:-

Code:
dX: [mX]-(DLookUp("[mX]","SurveyData","[Record]=" & [Record]-1))

This works fine, however I am struggling to make it work so it will only take the difference for each SurveyID. For example, the calculation does not calculate the difference between the X-coordinates between the Sensors A2 and G23,as they are not spatialy related. The code I am trying to use is shown below:-

Code:
dX: [mX]-(DLookUp("[mX]","SurveyData","[Record]=" & [Record]-1 & "AND [SurveyID]=" & (DLookUp("[SurveyID]","SurveyData","[Record]=" & [Record]-1))"))

I think I have got myself totally confused, but what I am trying to achieve is calculating the difference between the x coordinates from a previous record but only if the SurveyID matches on the previous record. I am using the record field to find the previous record.

View 5 Replies View Related

Queries :: Set Up A Query By Form With Multiple Criteria

Jul 29, 2015

I am trying to set up a query by form with multiple criteria.For the majority of the criteria I'm using the format: Like [Form]![formName].[txtInputboxName] &"*" .

I copied the Like (...) &"*" from someone else in order to allow for multiple, optional criteria, which does do the trick, however I don't understand why.

I now want to set up a criteria on my query to search for values between two input values to gives the records in the range e.g between 50 and 100 Following the above format, I want to put something that achieves this:

Between Like [Form]![formName].[txtInputboxName1] &"*" AND Like [Form]![formName].[txtInputboxName2] &"*"

with Inputbox1 being 50 and Inputbox2 being 100, however that code doesn't work and I don't know how to get around it as it keeps giving the 'incorrect syntax' error.

View 5 Replies View Related

Queries :: Using Query To Place Single Grand Total On Row Based On Particular Criteria?

Dec 7, 2014

I have a very simple query on an accounts form to show a running transaction history.

Identifying from the TransactionID (shown for display purposes only - normally hidden) three or four postings make up one transaction.

Using TransactionID 10 as an example, I'd like to have a sum of total [Credit]-[Debit] and have the query display on one line (either at the top of £1,429, or at the bottom of £16,995) to identify this is in fact one transaction, having three posts.

Transaction 9 will have obviously have one total, as this is a single post.

11 the same as 10, by having one total Transaction Value either at the top of the row or bottom.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved