Queries :: Add Previous Record Data To Next Record
Apr 11, 2013
I need to add two previous record fields together in a query. I have attached a picture to illustrate.
The "StudyYears" filed is the primary key of the table the data is being pulled from. The zero's are placeholders for the sum of the previous record's data.
RunningBalance is calculated as follows:
Code:
RunningBalance: IIf([a].[StudyYears]=[ReserveParameters]![StartingBalanceYear],CCur([ReserveParameters]![StartingBalance]),0)
Bal is calculated as follows:
Code:
Bal: [AnnualContribution]+[InterestIncome]+[Inflation_Adjusted_Expenditures]
How to go about adding the two together as in the picture?
Is there a way to do this relatively fast, as well as keeping the query updateable?
View Replies
ADVERTISEMENT
Apr 29, 2015
How to fill values in a new record with data from previous record?
I've total 11 columns in a table and values in 3 4 columns are repeating for few rows before it needs to be changed eventually. I want to fill these rows with values from previous record.
View 10 Replies
View Related
Aug 8, 2014
I'm struggling with a query to evaluate current and prior record data. I have a query producing 5000 records. I need to group records by Case ID and compare current date record to previous date record to determine if a team and worker name has changed during the year. I need to count how many times a cases is transferred to and out of a particular team from the beggining of the year. i.e., On 1/1/2014-Team1 has an inventory of 500 cases.
During the month 25 cases are transferred into Team1 and 15 cases are transferred out of Team1. So on 2/1/2014 Team1 begins with an inventory of 510 cases. Throughout the year cases come and go from and to Team1 each month so need to figure out how to create a query to count each change. See attachment displaying how the data is listed and how I invision it to work with the In/out column counts.
Specifically, at the begginig of the year (1/1/14) for case ID 1003 you can see it belongs to Mary in Team1 for January and February. Then in March the case is transferred out and went to Joe in Team 3. So for Mary a "-1" is recorded as a negative count for that Case ID. If later in the year the case is transferred back to Mary a "+1" would be recorded. Respectively evaluated for each of the 5000 records to get a total count for each of the teams by Case ID throughout the year.
I've started with DLookup, tried comparing current month to previous month using DMax. It works as long as I only select one case ID used in a separate query but if I use the whole subset (5000 records) it fails. I can't figure out how to group each set of case IDs and then apply the query.
My attempted query: DLookUp("[Team]","[Team_qry]","[Team_qry]![Date]=#" & CStr(DMax("[Date]","[Team_qry]","[Team_qry]![Date] <#" & CStr([Date]) & "#")) & "#")
View 3 Replies
View Related
Feb 20, 2014
How do you compare one record to the previous record? I have a query that shows items sold. It is sorted by day with today on top. I would like to create a column that has a 'thumb up' or 'thumb down" if todays was a better day than yesterday.
View 1 Replies
View Related
Apr 2, 2005
I'm a novice with Access but I thought I would use Access rather than Excel to record fuel use for our vehicles because the reporting functions should be more powerful.
I have set up a table where I input date, vehicle, member of staff, mileage of the vehicle and the cumulative reading from the fuel tank meter. I thought it should be simple enough to calculate the fuel used each fill by taking the meter reading away from the reading on the previous record, but I cannot find a way of getting Access to do this.
I am missing something obvious or not?
Thanks,
Henry
View 1 Replies
View Related
Dec 17, 2006
I have still not solved the problem wich is doing my head in!!!
In the following DB I have the "frm1" wich the value of the first record for "Value1" is 10 when I pass to the second record Iwould like to show automatically the value 10 in the field "Value1" this for all the records untill I change toa new value so from then on it will show the new value.
I believe is the Dlookup function, but I have not find the way to make it work.
I must be thick but I need your help!!!!!
Thanks
View 14 Replies
View Related
Apr 12, 2006
Hi
I need to copy some data from last record to next(New record), when a user clicks a button on a form. I don't want to copy all the data.
An example would be booking in items from an invoice:
Company would be the same
Invoice number would be the same
Product code would be different
quantity would be different
Hope this makes some sence, and i'm not being stupid:rolleyes:
Andy
View 1 Replies
View Related
Sep 23, 2013
I have a table that will have ITEMID as unique field but location could have save values. I tried using DLOOKUP to look at the value for the previous record to see if I need that value is same as current, however, since my data query are text formats, I am unable to. I get a message of mismatch data type. apply my query to look at sorted table by Location and ITEMID and if previous location = location, then my area=0?
View 6 Replies
View Related
Aug 21, 2006
Hi there! New to Access and this forum.
I am creating a form to update a table of records. The table represents purchase order assignments and I need the next sequential purchase order number (as per the order number from the previous record) to be displayed in the new record (order field) on the form.
Table: Orders
Field: OrderNumber
Form: Manual Orders
Data Entry Field: OrderNumber
Form was created using wizard.
Anyone able to help?
View 1 Replies
View Related
Aug 21, 2006
Hi there! New to Access and this forum.
I am creating a form to update a table of records. The table represents purchase order assignments and I need the next sequential purchase order number (as per the order number from the previous record) to be displayed in the new record (order field) on the form.
Table: Orders
Field: OrderNumber
Form: Manual Orders
Data Entry Field: OrderNumber
Form was created using wizard.
Information I would like to display is the content of OrderNumber Field +1.
Anyone able to help?
View 2 Replies
View Related
Jan 25, 2014
I've got stuck in preparation of this sales query. The primary sales table contains a mix of Canadian and the US detail invoice sales records. All sales records are in their native currencies The secondary lookup table contains daily US/CAN foreign exchange rates (FX).
I need to multiply every $US sales record (marked with U) with the FX rate in order to convert it to the Canadian currency. Unfortunately, this FX lookup table is missing over 50 daily rates in the last two years and as a result I cannot match them date-by-date with the sales table.
As a workaround, it is acceptable to use the previous FX rate in the table. The previous rate can be one or more days before the transaction occurred.
Attached is a sample database with the query that I've already built. The query contains two sample US records that are missing the FX rate on Jan 6. The FX rate of $1.0639 that needs to be applied to it should come from Jan 3rd entry.
New Datesales matcode curtype trans newrate
1/3/20141225.61281173224U R187611.0639
1/3/2014344.70361173260U R181731.0639
1/6/20142520 0022691U R19841
1/6/20145400 0022692U R19841
View 14 Replies
View Related
Jan 12, 2015
I have a database where I need to record student data, specifically marks and absenteeism. The marks are recorded each term as a running total. I have a final mark which needs to be equal to the 4th term mark.
I also need to record the number of days absent each term with a total at the end of the year.
My problem is that the term 4 mark is a in the previous record and the total days absent needs to be the total of the previous 4 records (term 1 - 4).
I using a create table query and an update query but that was a no go.
View 7 Replies
View Related
Jun 13, 2015
How do I find the previous record in a query using the autonumber field?
View 10 Replies
View Related
Oct 10, 2013
I want to get the datediff of the last returned date from vacation and the current vacation start date. But how to get difference from the previous record's date to this current record's date. I want to show date difference in an unbound textbox. I have a contiuous form which shows all vacation list of employees. It shows how many times he went vacations and when he went and when he returned.
View 14 Replies
View Related
Jan 20, 2014
I have a form that is used to book a new event for a client who is already in the database.Within that form I have a subform that is based on a query which displays information from that client's previous event. I did this using a solution found in the following thread: URL...It is based on pulling the second to last record that is related to the current client. It works perfectly when booking a new event that has taken place on a previous date. However, if the previous event occured on that same date (but at a previous time), it doesn't register.
I would prefer a query that would pull the record previous to the current one, instead of pulling the second to last record out of all that client's events.it would also mean that if more events are booked, then a past event is opened in a form, the sub forms in that form will display the event just prior to the current record.
View 14 Replies
View Related
Mar 29, 2015
I'm trying to refer to previous record in a query and i'm stuck as i do not know how to do it.
Here is my query:
Code:
SELECT
[Prod2Buy].[Product Code],
IIF([Missing] IS NULL,0,[Prod2Buy].[Quantity To Order]-[To Order]) AS [Rest To Order],
s.s_manu_code AS [Manufacturer Code],
s.prod_cost AS [Price Code],
[Code] ....
In fact the line: IIF([Missing] IS NULL,0,[Prod2Buy].[Quantity To Order]-[To Order]) AS [Rest To Order] should refer to previous record.
View 9 Replies
View Related
Sep 14, 2004
Somebody please help me!!!
I am creating a database that will record the details of approx 30 shops and will store information on Annual Turnover, Profit, Return, etc.
I need to create a field that will calculate the increase/decrease in annual turnover between the current year and the previous year.
So far I have created a subform that will show the last 12 years of data for the particular shop, but now I need to add a calculated field that will get the current years turnover and also reference the turnover for the previous year, i.e. the previous record., and display the result. The other thing that I will need to do, is to have this field not calculated for the initial years trading, so this field will need to be hidden in the first record.
Can someone please offer some advice on how to go about achieving this???
View 1 Replies
View Related
Dec 4, 2012
I have a subform that is embedded in a main form. The database itself is a few years old and so I think redesigning is out of the question. What I am wondering is if there is any specific code that can go into the tables themselves and populate the form based on the previous record. I would like for the Transfer to Rehabber fields (To and Permittee) to be duplicated on the Transfer From Rehabber fields (From and Permittee) on the next record. Do you think that there is code that will be able to achieve such a thing?
View 12 Replies
View Related
Oct 5, 2014
I want substract from 9/20/2014 totreg40 - reg = ovt but when reg=0 the remainder subtract from 9/19/2014 (previous record) totreg40 - reg = ovt, etc. The sum of reg = 40.
IDFECHA REGOVTTOTREG40
2309/15/2014 5.5 0 46.75
2319/16/2014 8 0 46.75
2329/17/2014 8 0 46.75
2349/18/2014 7.75 0 46.75
2979/19/2014 8 0 46.75
2359/19/2014 8 0 46.75
2339/20/2014 1.5 0 46.75
I want the result like this:
IDFECHA REG OVT TOTREG40
2309/15/2014 5.5 0 46.75
2319/16/2014 8 0 46.75
2329/17/2014 8 0 46.75
2349/18/2014 7.75 0 46.75
2979/19/2014 8 0 46.75
2359/19/2014 2.75 5.25 46.75
2339/20/2014 0 1.5 46.75
View 1 Replies
View Related
Dec 17, 2013
I am trying to use a query to find the previous record of a transaction and provide an additional field that computes the difference in the dates in days. (The days from TransferID 23 to TransferID 24)
TransferID Job Number Tool Number TranferDate DaysOnRent
22 1 10 9/1/13
22 1 12 9/1/13
23 2 10 10/18/13
23 2 12 10/18/13
24 3 10 12/15/13
24 3 12 12/15/13
I have seen other posts that reference the following link.
[URL]
View 8 Replies
View Related
Apr 30, 2007
I need a way to dynamically store a particular value in "field_2" of the CURRENT record depending on whether or not the value of "field_1" of the CURRENT record is identical to the value of "field_1" of the PREVIOUS record within the same table. The table is sorted on "field_1".
So, if the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is also "ABC", then store a value of "PPP" in "field_2" of the current record. IF on the other hand, the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is "XYZ", then store a value of "WWW" in "field_2" of the current record.
I have a report that will use these results to count only the number of records that have a "WWW" in "field_2".
Is this doable, maybe in a query somehow?
I should add that whatever the solution, it needs to be compatible with Access 2000.
View 1 Replies
View Related
Jan 22, 2015
There is a form which the user fills in 8 fields and saves it. Once saved, a new record opens.
However, I want to modify the save button to save the previous record and display a new record with only a limited no of fields to display from previous record, say 4 fields display from previous record, and the user fills the remaining 4 and saves it. Thus, the save cmd should continue to display 4 fields from the previous record.Already tried below code for save button but it displays all data of previous record as it is, doesn't display blank space for combo.118 and text2
DoCmd.GoToRecord , , acNewRec
DoCmd.GoToRecord , , acPrevious
Combo118.Text = ""
text2.Text=""
View 1 Replies
View Related
Aug 26, 2013
I need to know how to auto enter the date of the previous record into a new record. I have this db for my vehicle log sheets and I submit monthly a claim for the business km from my company. I usually cant remember the date of the previous claim and have to scroll back until I find the field with a date. It will be useful if the date was copied into every new record until I edit the date when I submit the claim. What I ask is during the new month all the dates will be the same until I submit the claim. I do not know how to do this, and yes I have done a search.
View 3 Replies
View Related
Nov 17, 2010
create a macro that automatically fills in the next invoice number in sequence",,I'm assuming this macro would look at the value of the previous record and add a one to itI don't want to use a AutoNumber field as I might need
(a) to modify value or
(b) need to skip numbers.
View 8 Replies
View Related
Sep 15, 2005
In my query, i want to automatically display the value of another field from the previous record in a field in my current record. i.e.
Name Value Previous
Record 1 1
Record 2 2 1
Record 3 7 2
Record 4 1 7
Is it possible to create some kind of simple expression to refer to data in another record?
Cheers,
Ben
View 6 Replies
View Related
Jun 29, 2015
I have a column "CAT" each time that CAT switches between 0 and 1, I would like my query to auto-create a "grouping" and increment the group by 1. What I am looking for is the output as shown below.
ID CAT GROUP
67 0 1
68 0 1
69 0 1
70 1 2
71 1 2
72 0 3
73 0 3
74 0 3
75 0 3
76 1 4
77 1 4
View 6 Replies
View Related
