I am building a simplified re-order point system - if inventory position drops below a certain level (the yellow level is this case) one or more purchase order lines has to be created in another table.
I have one table with the following field and data:
ItemId Red Yellow Green Multiple Inventory position 0001 10 30 50 5 45 0002 5 40 47 5 23 0003 11 20 30 10 5
I would like to generate new records (in another table) based on the above fields and three records.Basically the end result should look as the following:
The logic is quite simple - if inventory position is less than the yellow value new order lines should be created in multiple qty (based on the multiple field) until the aggregated value (in table 2) is above the green value.The priotization value should be based on the start inv (in tbl 2) compared to the values in red, yellow and green in tbl 1.
I am having trouble creating a query where I am trying to count number of records for different fields for a particular criteria, and combine the results into a single table.
My table is in the form, TimeandDate,WS127m_Avg,WS82m_Avg....
I want to count those records where a 9999 is reported, and report by month. For a single field I can do this OK using,
SELECT DateSerial(Year([TimeandDate]),Month([TimeandDate]),1) AS [Month], Count(WS127m_Avg) AS 9999s FROM CL_AllData WHERE (((WS127m_Avg)=9999)) GROUP BY DateSerial(Year([TimeandDate]),Month([TimeandDate]),1);
I can't figure out how to report an additional field (WS82m_Avg) at the same time, checking for the same criteria in that field (i.e. WS82m_Avg = 9999).
I have a query run that gives me a list of records that I view on a continuos form. What I want is to press a button and run a macro/Append Query to add a Single Summary record to another table.
For example my query spits out this data
Part # Quantity Serial Number GO2 1 123 GO2 2 456 GO2 2 789
What I'm looking to get is
Part Number Total Quantity Serial Number 1 Serial Number 2 .. GO2 5 123 456
I'm stuck on a couple of things.
1. Getting a new single row to append. 2. Getting Serial Numbers from several records to save on to a single record.
I've got a table tblPatienten, a table tblRechnung and a form frmRechnung.
The primary key in tblPatienten is KundenNummer, the primary key in tblRechnung is RechnungsNummer. The relationship between tblPatienten and tblRechnung is one to many.
Now, every patient (stored in tblPatienten) is allowed to make multiple orders (stored in tblRechnung).
How can I assign each new order entry in frmRechnung to an existing patient in tblPatienten?
For each record in my database, there are observation periods which are recorded in the format dd/mm/yyyy hh:mm:ss, titles as follows
1st Obs Start 1st Obs End 2nd Obs Start 2nd Obs End 3rd Obs Start 3rd Obs End.
I have been asked to create a query that will quickly show how many obervation periods commenced in a particular month. What I am trying to do is create a column that will be named Obs Start, and another, Obs End. For each record ID, this would then show as follows:
Hello friends,I have a pretty noobish question. I was wondering if it was possible to have several (3 in my case) different forms that apply data to a single table? The main table has three different types of data: 1. Client info 2. Services A 3.Services B. Each type of data has about 7/50/12 different fields of data in each set so that trying to include all this data on a single form is not very user friendly due to clutter.I have three forms that input data into the table, however the record navigation command buttons that I have on the forms do not apply the data to the correct record. For instance, when I input the Client info for client #2, and click the "open services A form" command button, the form opens on client #1 Services A instead of to a new record. Is this something I have done wrong, or is it due more to MS Access limitations? Thanks
Hi guys. I'm a bit of a noob with Access. I have a table which is 15 rows by 250,000 columns. So there are about 3.75m records.
What I need to do is to get access to export a number of csv files automatically from this table.
I need each csv file to contain all the data in the table for a certain range of rows. This is determined by a value in a particular column. This is a sample of the table.
http://i30.tinypic.com/aljf5s.jpg
Basically Store_Nbr represents a UID for a particular store. All the data is currently in one big table, and I need a single csv file for each different store_nbr (so it contains all the data in the table for each unique store). Also, for each store_nbr, there are different Year Month of Surveys. For each store_nbr, I need a different csv file for each Year Month of Survey. This will probably divide up the 250,000 long table into about 200 csv files, as there are about 50 different Store_nbrs, and there are 4 surveys for each individual store.
Sorry if I've not made myself perfectly clear.
I'm sure there's a simple way of doing it, but I really do suck with access and was wondering if you guys had any idea.
On our main menu table, I only want to be able to add one record.
On the form that I have linked to this table, should you press the tab key to go through all the items / buttons, it opens a blank record screen. However, I do not want this. Any ideas?
I am trying to determine the best method for how to handle this query using Access 2013. I have a clients table that contains the following:
clientID fName lName admissionDate dischargeDate 1 John Doe 05/06/2014 06/27/2014 2 Jane Doe 04/24/2014 05/15/2014 3 Steven Smith 05/15/2014 NULL/Empty 4 Chris Davis 06/12/2014 NULL/Empty
Then there is a WeeklyProgressNotes table that is there for the person that is responsible for auditing the clients charts. It does not contain the actual weeklyprogressnotes, it only contains a Yes/No field and a date field for the date the weeklyprogressnote was completed. Like below:
I am creating a form that the auditor can open to determine what weeks she needs to check for each client to see if they have their weeklyprogressnotes completed that week. The weeks run Mon - Sun and there will be no record in the WeeklyProgressNotes table if she has not yet checked and confirmed for that week. So the form would basically look like this:
fName lName week completed date clientID(hidden) John Doe 5/19/14-5/25/14 Checkbox Null 1 John Doe 5/26/14-6/1/14 Checkbox Null 1 John Doe 6/2/14-6/8/14 Checkbox Null 1 John Doe 6/9/14-6/15/14 Checkbox Null 1 John Doe 6/16/14-6/22/14 Checkbox Null 1 John Doe 6/23/14-6/29/14 Checkbox Null 1 Jane Doe 4/28/14-5/4/14 Checkbox Null 2 and so on.......
I have thought about creating an SQL statement to select all of the clients and then creating a function that determines their admission date within the specific week and their discharge date withing the specific week and then create a loop with another SQL statement with a BETWEEN clause for all the weeks and determine if there is an entry in the WeeklyProgressNotes table or not. If not then I would display out the above info. I'm not sure if there is an easier, less search intensive way of doing it. Maybe an SQL query that can cut done on some of the looping.
Here is my problem: I have an Access database that contains a table with three columns (A & B & C). Field A is for code values and field B is for the value for that particular code. Field C holds the case number. I have a folder that contains the information for over 5000 case numbers. Each case number needs to be placed inside of the table. Considering there are 5000 case numbers, I dont want to use the import wizard 5000 times.
Furthermore, the text file only has two columns (for A and B).
I am trying to create a VBA that will append rows to the table by going into each file and placing the information into the table. The first row for each file contains the case number. So when the VBA runs, it should open the text file get the case number from the first row (field B on the text file) and place that in the case number field of the table for the entire file; and then repeat this action for all of the files in the entire folder.
Any help that can be provided will be greatly appreciated.
This works just fine in creating the desired result - EXCEPT I don't get all the records.
When I remove the 'cartesian table', and right join everything, then I get the correct results. If I keep everything as-is and reintroduce the cartesian table, then I get an error about there being an ambiguous outer join.
I have some data in excel which I am importing it into MS Access 2002. Each excel file (one worksheet per file) is imported into separate tables.
I want to combine all my imported tables into one table. Is that possible, if yes then how and if no then what can be done to get single table after impoting data from various excel files.
I'm developing a simple sporting records db. I have a 'Competitor' table listing competitors as follows: CompetitorPK, Name, Division, Club. I have a 'Contest' table listing contests as follows: ContestPK, Competitor1_FK, Competitor2_FK, Winner_FK, Score etc. My question is have I modelled tables correctly i.e. CompetitorPK will appear in three columns of Contest table. How do I define this relationship? What alternative is there to what I have done.I intend to use forms to populate both tables (independantly obviously).
i have 2 tables.. 1 with bookings and 1 with a BonusPeriod range.
in the Bookings table there is a field called [ServiceDate]
in the bonus table i have a field called [Period] which is text i also have 2 dates, [StartDate] And [EndDate] i need to Dlookup the Bonus table to return the value of the period table based on where the [ServiceDate] falls.
i dont want to use VBA (i really need it to work within a query that inserts it's data into another table)
i've tried everything but had no joy
Expr1: DLookUp("[Period]","BonusPeriods","[ServiceDate]" Between "#[StartDate]#" And "#[EndDate]#")
Expr1: DLookUp("[Period]","BonusPeriods","[Staff_BookingsAndQuotes_Master].[ServiceDate]" Between "#[StartDate]#" And "#[EndDate]#")
Expr1: DLookUp("[Period]","BonusPeriods","(FormatDateTime([ServiceDate]),"yyyy-mm-dd") Between (FormatDateTime([BonusPeriods]![StartDate]),"yyyy-mm-dd") and (FormatDateTime([BonusPeriods]![EndDate],"yyyy-mm-dd"))))
:eek: I have a large table with 1 damn corrupted record, the database can't be repaird, compact, I can't use the copy ,method since the table is over 9000 record sets.
I tried creating a new table and appending the non-corrupted record into it with no success, it is keep locking on me.
Have you guys tried anything else that works for this situation???
I have tables Account (PK acctnum) and Orders (linked via acctnum to Account). There are multiple orders per account that need to be billed individually. When creating an invoice I need to add the Account to the Invoice table and the Orders to the InvoiceDetail table. I use 2 queries to accomplish this. The first one though adds multiple records to the invoice table (because of the one to many relationship). I need to keep that so I don't bill anyone with no orders.
INSERT INTO Invoices ( InvoiceDate, AcctNum ) SELECT DISTINCT Date() AS InvoiceDate, Account.AcctNum FROM Account INNER JOIN [Order] ON Account.AcctNum = Order.AcctNum WHERE (((Order.OrderNum)=[Forms]![Account]![Order].[Form]![OrderNum]) AND ((Account.BillingCycle)="on discharge") AND ((Order.EndDate) Is Not Null) AND ((Order.Closed)=Yes) AND ((Order.PatientName)=[Forms]![Account]![Order].[Form]![PatientName]));
Is there any way to get it to only add one record? I've tried limiting it with several parameters to no avail.
In a situation where I imported an excel file with so many columns and split them into two temp tables and they are linked using a key.
the data has a fixed part lets say
Field1....Field2.....Filed3.....Field4...then Field5.....Field6.....Field7....Field8 is the same data range as Field9...Field10...Field11...Field12. I would want to split this data into multiple rows like this
Field 1 Field2 Field3 Field4 Field5 Field6 Field7 Field8 Field 1 Field2 Field3 Field4 Field9 field10 field11 field12 and so own...
I want to "lock" a record in a table so that it is read only and cannot be accessed/edited/deleted. Is it possible to lock a single record in this way on a permanent basis? It's actually the first record in the table.
I would like to be able to copy a single record in a table and then paste this record a pre-defined number of times 10,20,30 depending on requirements. The reason I need to do this is that I want to set up a number of identical records that can easily be amended into unique records. This will vastly reduce the amount of work and time spent entering records individually.
The only way that I have been able to achieve this is to copy and transfer the master record into Excel, and then copy the row and paste it into a range of cells. Copy the range of cells back from Excel and then paste this range back into the Access table.
This works but is long winded; what I would like to know is is there a simply way of achieving this.
SQL stored procedure which is simple INSERT statement on a single table 'tblSOF'
Code: -- ================================================ -- Template generated from Template Explorer using: -- Create Procedure (New Menu).SQL -- -- Use the Specify Values for Template Parameters -- command (Ctrl-Shift-M) to fill in the parameter values below.
[Code] ....
I am stumped with the following error.
Error: Msg 102, Level 15, State 1, Procedure InsertINTO_tblSOF_sp, Line 80 Incorrect syntax near ')'.
I have a table that is basically a survey form. The same series of options was available for 35 questions, and the table used to have a text string written for each answer. Because of all the repetitive data, I created a second table that assigned a number value to each of the nine possible options in these 35 separate fields. What happened is that, instead of the same text strings repeated over and over (and taking up real estate), now each of the 35 columns had a single number in them.
Now comes the day of reckoning and TPTB want a query with the raw data and the original text strings back in instead of the numbers. I was thinking doing something along the lines of a DLookup, but I can't seem to make that work in a query correctly. Apart from calling the same table and linking it over and over to the different fields in the original data table (see photo for how insane that is).
What I have is a database setup with multiple tables in which different areas of my DC can input information simultaneously into their respective tables. I then have another database linked to it for myself to have a live view of each updated record. I would like to see all the records of each table in 1 single table (possibly just sorted ascending by time). Each table has the same Field headings but may have different qtys of records. As I will then have it linked to an Excel table to VLOOKUP from it.
I have tried Union coding but always get Syntax Error etc.
