Queries :: Alternate Rounding On Dates In Query?

Aug 13, 2014

I have a query expression that calculates the number of years between 2 dates using DateDiff. Here is the equation as it is:

BudgetedHQPCalc: Round(DateDiff("yyyy",[DateHired],[DateTerminated]),1)

What I would like this to do, is if the difference is, for example, 1.4, I want the number rounded down, if its 1.6 I want it rounded up, and if its 1.5, i want to use alternate rounding (1.5 down 2, 2.5 up to 3).

Is there an easy way to do this?

View Replies


ADVERTISEMENT

Rounding Dates Up To Monday?

Jul 14, 2005

Hi all,

I have a 'StartDate' field which must always fall on a Monday and is based on a previous date + interval.

If this StartDate falls on a day of the week other than Monday, I need to add the appropriate number of days to bring it to the following Monday.

This can be done using 6 Update queries (one for each day) such as below but is there a neater way of doing all 6 in one go?

Thanks in advance.


UPDATE JobCards
SET JobCards.[StartDate] = [StartDate]+6
WHERE (((Weekday(Weekday([StartDate])))=3));

View 7 Replies View Related

Queries :: Rounding Value In Calculated Field In Crosstab Query

Aug 4, 2015

I have a very basic query with the following calculated field in it:

ProjRevNRC: IIf([ProjRevDate]>=DateSerial(Year(Date()),Month(Date()),1),[CurrentNRC]*[Rev Flow Through],0)

I went into the properties if that field inside the query design and changed it to Standard with 0 decimal places and it worked fine.

But when I based a crosstab query off the query that contained the above calculated field, I cannot seem to get the numbers to format correctly. 1231313.424 is shown instead 1,231,313 and I don't have a line in the Properties window to even change the decimal places. It doesn't recognize when I change the format to Standard. I have tried using Round([ProjRevNRC]) which gets rid of the decimal places as desired but does not show commas.

I'm sure it's a simple part of the Round expression that I am missing but nothing has worked.

View 4 Replies View Related

Display Alternate Column In A Query

Jul 1, 2015

I am using the Desktop Project Management template in Access and want to change a Open Project query from displaying the "id" which is a number, to the name column. In the projects table the field is set to number which is in a relationship with the employees table. Without changing any of that is there a way to run a query that will display the name instead of the number?

View 6 Replies View Related

Stopping Queries From Rounding Off

Dec 19, 2007

I have two tables. Table1 has two monetary value fields (both set with auto decimal places) and table2 has one monetary field. Then I have an append query which appends all data from table1 to table2, except for the monetary fields which are added up and then appended into table2's single monetary field (which also has decimal places set to auto). The formula I use for this is as follows:

Total Value: [Gross Value]+[Adj'mt Value]

Problem is, the total figure appended to table2 is rounded off to the nearest integer, whilst still displaying decimal places (45.00, 201.00 etc). Is there some sort of variable to set in the query to stop it from rounding off the result of this formula?

Any help would be appreciated.

Thanks.

View 1 Replies View Related

Queries :: Price Not Rounding Up Correctly?

Aug 22, 2013

I seem to be having some trouble with my unit price. Its not round up correctly.

I currently have this :

Extended Price: CCur(Nz([Quantity]+[QuantityToFollow],0)*[UnitPrice]*(1-[Discount]))

Which comes to £45.74, but the actually price should be £45.72. Its some how rounding up. I think. My current unit price is £7.62 however Access seems to think it is £7.6241.

View 1 Replies View Related

Queries :: Rounding Negative Numbers Up To 0

Mar 13, 2015

I can not have any negitive numbers show up in my field so I need to round up and negatives to "0" ...

View 10 Replies View Related

Queries :: Rounding To 2 Decimal Places

Aug 20, 2013

I have a database that has raw data input to 2 decimal places. There are multiple queries set up to sum the total cost by facility and box type. When the queries are run, the output is to 4 decimal places. I need to round the cost to 2 decimal places. (Right now, it is formatted to show 2 decimal places, but when you click on the number, there can be up to 4 numbers after the decimal.

I have tried to round the numbers within the queries and I get errors asking for parameters. I've also tried to round the numbers in the append queries where I move the final numbers to a summary table. When I do that, I get an error message that the database can't find the table I selected.

I'm not sure how or where it's best to add the rounding function so that my final output is in the format I need.

View 2 Replies View Related

Queries :: Rounding Function To Always Round UP In MS Access?

Oct 10, 2014

I know the Round function exists in MSAccess, but what I need is one that will always round up, and never round down!

Easy enough in Excel, but I can't find one in Access?

View 2 Replies View Related

Queries :: IIF Statements - Rounding Value In Calculated Field

Mar 24, 2014

I am using access 2010. I have a query with an iif statement on a calculated field im trying to round up. ex.

Code:
TotalDiscount: Round(iif([field1]="Piece",[int]-[decr],[field2]*[field3]/[field4],3))

I get an error something like "wrong number of arguments or expression on comma.

View 2 Replies View Related

Queries :: Field In A Table That Keeps Rounding Data Entry Off

Nov 11, 2013

I have a field in a table that keeps rounding the data entry off. It has identical properties to the field next to it but one rounds and the other does not. I tried deleting the field and creating a new one.

View 5 Replies View Related

Queries :: Automatic Dates In Query

Jun 12, 2015

I have a table with tasks in which are allocated to specific staff members. The start date of the task is currently inputted by the user and then an estimated time frame is inputted which automatically enters the planned end date.

When a task is complete a Yes/No box is ticked so that these tasks don't show up on the current list anymore.

I wondered if it is possible, for the second task allocated to a certain person to have the start date automatically inputted depending on the planned end date of the precious task.

So if the planned end date was 12/06/2015 then the start date of the next would be 12/06/2015 and so on.

View 2 Replies View Related

Queries :: Query For Records Between Two Dates

Jun 5, 2013

Only one table : Customer ID,Customer name , subscription period, subscription start date and subscription end date.

I need values where subscription start date is between date1 and date2 and subscription end date is between date 1 and date2.

Detail explanation:

customer1 subscribed from 2-feb 2012 to 2-feb 2013
customer2 subscribed from 5-aug-2012 to 5-aug-2013
customer3 subscribed from 1-Jan-2013 to 31-Dec-2013
when the user enters date 1 as 1-jan-2013 and date 2 as 30-Jun-2013

Even though the subscription start date is not within the range entered by the user.I need to get all three customers because the subscription enddate falls within the range.And customer 3 is also required as subscription start date is within the range.

View 2 Replies View Related

Queries :: Query For Same Fields / Different Dates

Jul 3, 2013

I have a query that is based on three queries. 2 of those queries have the same fields but return data for different dates. The 3rd query returns the dates needed. In other words, I am trying to return all results from both queries. these are the results I want:

Report_ID Report_Date Contents Approvers
Standard ops 5/1/13 daily operations rpt tom tomlin
royer manuf 7/1/13 syndication rpt rob davis

etc.

These are for year-t0-date. there is a YTD query that returns all dates needed. The other two queries return records on different dates, on is for dates <5/5/13 and the other is for dates >5/4/13. I have listed the SQL below. It returns the correct records, but for the Record_ID it returns -1 in each field instead of the report_ID text. So, I need to get the other fields to show up correctly.

Code:
SELECT [Daily_rpts_YTD_due_before_5_5_2013]![Report_ID] Or [Daily_rpts_YTD_due_after_5_4_2013]![Report_ID] AS [Report ID], due_dates_Daily_YTD.Due_dates
FROM (due_dates_Daily_YTD LEFT JOIN Daily_rpts_YTD_due_before_5_5_2013 ON due_dates_Daily_YTD.Due_dates = Daily_rpts_YTD_due_before_5_5_2013.Due_dates) LEFT JOIN Daily_rpts_YTD_due_after_5_4_2013 ON due_dates_Daily_YTD.Due_dates = Daily_rpts_YTD_due_after_5_4_2013.Due_dates
WHERE (((due_dates_Daily_YTD.Due_dates)=[Daily_rpts_YTD_due_after_5_4_2013]![Due_dates] Or (due_dates_Daily_YTD.Due_dates)=[Daily_rpts_YTD_due_before_5_5_2013]![Due_dates]));

View 2 Replies View Related

Queries :: Rounding Average Values - Result With Two Decimal Places?

Apr 23, 2013

I'm trying to get this query to work:

Code:
SELECT Avg(Round([Final 205].[LastOfSumOfRehLOS],2)) AS AvgInpLOS, Avg(Round([LastOfSumOfWaitLOS],1)) AS AvgWaitTime, Count([Final 205].PHN) AS Observations, [Final 205].LastOfIntensity AS Intensity_Level
FROM [Final 205]
GROUP BY [Final 205].LastOfIntensity;

It doesn't found the result to two decimal places.

View 1 Replies View Related

Queries :: Calculate Expiry Dates Of Training Courses - Due Dates Not Shown

Aug 28, 2013

I have built a query to calculate the expiry dates of training courses but I am trying to input a criteria so that only dates within 90 days of todays date show. I am using Date()<90 but it doesn't return the correct information. What the criteria should be for this?

View 1 Replies View Related

Queries :: Query To Filter Records Between Dates

Feb 19, 2015

I have a few queries which are used to create reminder email on training which is due for renewal.Some training required reminder 6 months before 2 year expiry. I use this in the criteria for the training date within query:

Between DateSerial(Year(Date()),Month(Date())-18,1) And DateSerial(Year(Date()),Month(Date())-17,0)

Some training required reminder 3 months before 1 year expiry. I use this in the criteria for the training date within query:

Between DateSerial(Year(Date()),Month(Date())-9,1) And DateSerial(Year(Date()),Month(Date())-8,0)

My problem is with training requiring reminder 6 months before 3 year expiry. Using this criteria:

Between DateSerial(Year(Date()),Month(Date())-30,1) And DateSerial(Year(Date()),Month(Date())-29,0)

Doesn't show any results (although there is training which was done 30months ago, expiring in 6 months time).

Changing the -30 (months) and -29 (months) in above down to -22 & -21 shows records as expected, but anything below -22/-21 doesn't show any records.

View 3 Replies View Related

Queries :: Filter Query By Year Of Dates?

Jan 23, 2014

I'm trying to filter an append query by a year selected in a combo box [cboYear] for a field [ProgramDate]. The AfterUpdate on the cbo filters the append query based off of the selection (or selections-I'm using multiple combo boxes on the form). I then run a report based off of the appended table for a report.

I set my criteria for [ProgramDate] the query to be:

Code:

Year([ProgramDate])=[Forms]![frm_rpt_Programs]![cboYear]

The above code isn't working, even when I just try to run the query while the form is open. It's still returning all records.

View 2 Replies View Related

Queries :: Crosstab Query Using Dates For Next 12 Months

Jun 23, 2014

I want to create a cosstab query with dates for the next 12 months accross the top as columns and employee names down the side as rows. I then want to populate with data showing what each person is programed to do under the dates. For instance trainer 1 is delivering training from the 23/06-30/06 then designing a course from 02/07-10/07. that type of thing.

I could represent an activity using a colour i.e. yellow for delivery, green for design etc.

Also do I need to create a table with all the dates? Is there a quick way of doing this?

View 7 Replies View Related

Queries :: Multiple Counts Between 2 Dates In 1 Query

Mar 4, 2015

I have a list of dates and I want 1 query which counts the dates between numerous criteria. for example, colum 1; dates between 1/1/14 and 16/02/2014. Colum2 between 17/02/2014 and 15/04/2014.

I have attached a screenshot.

View 4 Replies View Related

Queries :: CountIf Between Dates In Crosstab Query

Nov 4, 2013

I have generated a table using a crosstab query and it gives the information as below

12/10 12/11 12/12 13/01
Part 1 1 2
Part 2 4 4 4
Part 3 5

So basically part, qty used, year/month used - it works fine up to this point.

Now I want to either add more columns to the crosstab query to count number of times Part 1 was used in last 12 months & 24-13 months

Or

Create another query to do this.

But I want the count function to start counting from current month to last 12 months and from month 13 to month 24 (in another column).

The problem I am having is that this query will run every month and I don't want to update the column headers (in query property sheet) instead I want query to pick this up automatically.

I use the design view to generate queries.

View 1 Replies View Related

Queries :: Update Query To Change Dates

Apr 17, 2015

I'm working on a report that highlights employees when they are leaving on travel and returning on travel and my problem is that the report is only run on the weekdays. It highlights all employees that returned yesterday so for instance on Monday's report it only shows people that returned Sunday and not Friday and Saturday.

My first thought was to make an update query convert those days to Sunday in a new column on my table which would then still cause the employee to be highlighted on monday. I made a table with all Fridays and Saturday's in the year and then in the second column is the Sunday Date to update the new field.

I haven't been able to get the update query to work correctly and was wondering if there would be a much easier solution so a person wouldn't continually extend the weekend table manually.

View 3 Replies View Related

Queries :: Query Criteria Between Two Dates And Two Times

Sep 1, 2014

I have a table which list a load of items, one field is date and one field is time.I have a form with two date boxes and two time boxes, the idea is for the user to search between the two inputted dates and the two inputted times.This then runs a query for a report to be produced. The problem I having is getting the query to runs both criteria it returns nothing.here is the Where part of the current SQL.

WHERE (((tblIncident.IncDate) Between [Forms]![FRM_SearchMulti]![txtrepdate]
And [Forms]![FRM_SearchMulti]![TxtrepDateB]) AND ((tblIncident.IncTime) Between [Forms]![FRM_SearchMulti]![txtreptimea]
And [Forms]![FRM_SearchMulti]![txtreptimeb]))ORDER BY tblIncident.IncDate, tblIncident.IncTime;

View 7 Replies View Related

Queries :: How To Make Certain Range Of Dates For Query To Run

Oct 9, 2013

I have a query and I want to make a certain range of dates for the query to run. For example: from 10/6 to 10/7. What would be a parameter for this range of date? Should I put it on a query?

View 11 Replies View Related

Queries :: Dates Not Changing - Incomplete Query Clause

Jan 17, 2014

I have a date field NxtAPayDate that I need to update to the same day in the next calendar quarter. I have an update query set up using DATEADD but it does not change the dates. The table name is AutoPay

I am using the Query Design Grid. This is the SQL code behind the query:

UPDATE AutoPay SET AutoPay.NxtAPayDate = DateAdd("q",1,[AutoPay]![NxtAPayDate]);

When I view the results the dates are the same - original dates, when I try to sort the results, I get a message box with the following: syntax error, incomplete query clause?

I cannot get the dates to change by using a specific date either

UPDATE AutoPay SET AutoPay.NxtAPayDate = #1/2/2014#;

View 1 Replies View Related

Queries :: Changing Query In VBA Not Working With Calculated Dates?

Sep 9, 2013

I am trying to run a change an existing query in real time to allow date filtering for 4 different categories. I can get two of them to work. Calibration Date and Icepoint Date. But for The two calculated fields Calibration due date and Icepoint date I cannot get it to filter properly e.g. for 2013 dates it also includes 2014 dates and just does not work properly. I am thinking its due to it being a calculated field but don't have a clue how to fix it. see pasted code for calibration due date filter where Todate and Fromdate are the 2 dates used. I also have the on current code and the exit code to reset the query to its original status.

Public Sub SetDate1()
'Apply date filter and rebuild query in real time
On Error GoTo Err_SetDate1
If IsNull(Me!ToDate) And IsNull(Me!FromDate) Then
MsgBox ("Please Enter Date First"), vbExclamation
GoTo Exit_SetDate1

[code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved