Queries :: Append Query With User Entered Parameter Values

Sep 17, 2013

I have an append query that currently looks like this URL...This query automatically adds the machine parameters for a product code and lot number into the running condition log. This is so the user does not have to manually go in and tediously select each machine parameter.

The running condition log also has a date field to specify what day and record number the machine parameter's value was recorded on. When I run the query the appended rows look like this. The product and lot are defined by user parameter and there are actually about 36 machine parameters

Code:
Productstockcode LotNo Day Record Parameter ActualCond
PE-500 130816m71 StockTemp
PE-500 130816m71 Zone 1
PE-500 130816m71 Zone 2

My question is: how do I modify the query to automatically add the date and record number in one shot? It needs to be user defined at the time of the query because this data is not stored anywhere else in the database. For each 36 machine parameters the day and record would be the same.

View Replies


ADVERTISEMENT

Modules & VBA :: Parameter Query - Detect If User Has Not Entered A Criteria

Dec 12, 2014

I have a report that is fed by a parameter query. When a command button (Command23) is clicked a parameter box opens and the user enters a subsystem number. A report for that subsystem then opens.

I want to open the report with VBA and show a message if the user has failed to enter a subsystem number in the parameter box and just clicked OK.

The problem is I don't know how to refer to the parameter box and detect if it has been left empty before clicking OK. I first tried to use IsNull in an If statement with Command23.Value, but now realize it is the value in the parameter box I am after, not the "value" of Command23.

How can I change my code to detect if the parameter box has not been filled out?

Private Sub Command23_Click()
If IsNull(Command23.Value) Then
MsgBox "You did not enter a Subsystem", vbOKOnly, "No Criteria Entered"
Else
DoCmd.OpenReport "rptTESTInfoBySubsystem", acViewReport
End If
End Sub

View 1 Replies View Related

Queries :: Copy Query Parameter That Is Entered To A Variable

Feb 12, 2014

I am trying to copy the parameter value that is entered to a variable so that it can be used to run other queries without typing it in over and over. Once my form is finished it will run 4 queries, and the current setup is that I would have to retype the parameter each time.

View 9 Replies View Related

Forms :: Append Data To A Table Entered By User

May 20, 2013

How I would go about appending data to a table that has been entered by a user on a form.

My initial idea to tackle this was to create a number of text boxes as a method of user input which would all then transfer to a table but this doesn't have much longevity to it(if the database requires additional columns to be added, etc.)

The setup at the moment is two tables, a main table, and a temporary table(which is where I intend to first store the user input, this is so that the user can view what they have entered and make any necessary changes(undo))

I'm wondering if there are any easier ways to go about this such as, a msgbox appears and asks the user to enter each individual column data for a row. This doesn't sound like the most efficient way but efficiency isn't a priority right now and is something I'll look at later.

I'd like it so that a user can input data into a number of text boxes, a button has an onclick event that will append all entered values to the temporary table, this is then relayed(I'm assuming through requery?) back to the user as a way of checking before really adding it to the main database, and then if they're happy there is another button which is then enabled so they can add it to the main database.

View 9 Replies View Related

Queries :: Select Query To Pull Records Based On Multiple Strings Entered By A User?

May 1, 2013

Is it possible to run a basic select query to pull records based on multiple strings entered by a user?

I have a query with field criteria - Like '*' & [Type In MMDBID:-] & '*'

This allows the user to input one MMDBID and the records are retrieved from the db.

I can also use the OR statement in the same field criteria "AB123" OR "BC123", and all records based on those values are pulled back.

But I cannot get the user to input multiple values and I tried amending the SQL string based on the OR criteria above

SQL statement (Like) is below :

SELECT tblFund.MMDBID, tblFund.[Investment Name], tblCodesLive.[IOE Code], tblCodesLive.[Uptix Code], tblFund.[Red Payment Deadline]
FROM (tblFund INNER JOIN tblCodesLive ON tblFund.MMDBID = tblCodesLive.MMDBID) INNER JOIN tblContact ON (tblFund.MMDBID = tblContact.MMDBID) AND (tblCodesLive.MMDBID = tblContact.MMDBID)
WHERE (((tblFund.MMDBID) Like '*' & [Type In MMDBID:-] & '*') AND ((tblFund.Editing)=False) AND ((tblFund.Closed_Fund)=False));

View 10 Replies View Related

Queries :: Subtract 1 From Entered Parameter

Jul 23, 2014

ACCESS 2007

I've got a table in which some records are associated with a number (numeric field): 691, 692, 693 etc. My parameter query asks for the number I'm looking for (parameter) and should return all records associated with that number or with that number minus one.

Something like this:
enter parameter
find records

in which number = parameter
OR
in which number = (parameter - 1)

How can I do that?

View 4 Replies View Related

Queries :: How To Create A Query To Append Values

Nov 6, 2014

I am trying to create a query to append new records from my NEW database into my old excel database.....

The old DB has 4-5 extra tabs that the NEW database does not have so when I append, in those extra columns the new database will just have blank records since the column doesn't exist.

Usually I do a append query in design view. but sometimes it gets funny because it creates duplicates...

How would I go about it, so its quicker and persistent like creating a macro excel.

View 1 Replies View Related

Queries :: User Selected Fields Added To Query Through Parameter

Oct 8, 2014

Is it possible to have the user select which field is added to the query through a parameter? In my query I have a table where each record has a part number and has sales number for each month. When the user runs the query I want them to be able to select which month is returned.

My table basically looks like this:

PartNumber,Jan,Feb,Mar,Apr,May etc.
01PartNumber,15,20,30,25,28 etc.
02PartNumber,12,14,12,16,20 etc

I want the user to enter "Mar" when prompted and return the parts numbers with values from "Mar".

Access 2007

View 10 Replies View Related

Queries :: Append Query To Check For Existing Values And Add Only Those Not Present

Oct 23, 2013

I have a database used to manage teaching assignments (which kid is assigned to which teacher so to speak). I have this relationship defined through three tables, a teacher table, a student table, both with unique ID's. The third table is used to define the assignment. Also, the kid table has an extra GroupID. The group ID is what is used to define. So in the definition table, Teacher 1 is assigned to Group 1, and so on (though their may be 20 kids in group 1). When a new teacher is added to the teacher table, I need it to add it to the corresponding field in the definition table. The groupID is in the table as an Autonumber so that will populate automatically.

I need to appendTeacherID to tblassignment (TeacherassignmentID) and have only one occurrence of the TeacherID. So, if I have teachers 1-8 listed, each assigned to a group# in the tblassignment, and I add Teacher 9, I need it to add Teacher 9's unique ID to the TeacherassignmentID field without adding 1-8 again. I can't figure out how to "check" for ID's 1-9 and add only those I've added to the teacher list that aren't already assigned to a group.

I've tried a few different SQL queries append/select queries but nothing seems to do what I need it to do....

View 1 Replies View Related

Queries :: Dynamic Top Value According To Number Entered By User?

Dec 17, 2013

Is it possible to have the user enter the number of top records to choose in a query?

I know that you can enter a number or percentage in the Top Values property of the query but I would like the user to be able to enter this number each time they run the query since it may be different each time and not always, say, the top 10 records.

View 12 Replies View Related

Union Query Prompts For Parameters - Returns All Records With Parameter Entered!

May 17, 2006

Hello all,

I realise this issue is a common one and it is usually down to simple typos (I've looked at several similar posts) but none of the advice I've seen has solved my problem. I've designed the following Union Query:

SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 1]

UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 2]

UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 3];


It should be very simple and I've checked it over and over, but when I run the query an Enter Parameter dialog appears prompting me to enter Email.

If I just click OK I get all the records but with the email field blank.

Similarly if I type x@y.com it returns all records but with the email fields all containing x@y.com

Advice would be very much appreciated!! Thank you in advance.

Abi

View 2 Replies View Related

Using Form Data In User-Entered Query Search Criteria

Dec 20, 2006

I am attempting my first access database which tracks blood components in our medical facility. When a component is issued to a patient there is a button to push which links to a report that runs a query. The user must enter the unique key for the component at a promt, which ensures the report generated will be for that component only. My question is if there is a way to cpture and use that key automatically when pressing the button. If I need to clarify something, please let me know--I may not have the Access developer lingo down yet...

View 2 Replies View Related

Passing Criteria To Append Parameter Query Through VBA

Dec 6, 2007

Hello Everybody,

I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID

I use the following code as normal
Private Sub Command19_Click()
On Error GoTo Err_Command19_Click

Dim stDocName As String

stDocName = "apNewPres"
DoCmd.OpenQuery stDocName, acNormal, acEdit

Exit_Command19_Click:
Exit Sub

Err_Command19_Click:
MsgBox Err.Description
Resume Exit_Command19_Click

End Sub

Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.

Thanks for any help

View 2 Replies View Related

Multiple Table Parameter Append Query

Oct 6, 2005

With referential integrity enforced, is it possible to use append query to append to multiple tables based on only one parameter that applies to only one table. If so, please enlighten me with a detailed explanation.

Thank you

View 1 Replies View Related

User Defined Parameter Queries / Forms Major Problems !!

Oct 25, 2006

Good Morning

Looking for the user to select a product name from a drop down box (not type in) when running query / report which will return details on only that product rather than all others in the query.

I have got major problems with the custom dialog boxes -- have got a table of product names, a query called current stock ( active products) . I can easily get a standard dialog box by putting [product code] in brackets in the query and this is not a problem. However in getting a custom dialog box I have had lots of problems.

Created a form called form999 which has product name field as a combo box and this has been named master1 . Clicking the form on it's own brings up the dialog box correctly and the drop down box selects the current products which is should do.
However linking it to the query I have put [Forms]![form999]![master1] in the query and it will not link unfortunately and is driving me mad.
Upon running the query it simply brings up the standard dialog box with [Forms]![form999]![master1] as the "enter parameter value. Understand code is required to get the OK and cancel macros working etc but when I click the query it should bring up the custom box which is the first stage and it is not ?? Any assistance would be greatly received.

Are there any sample DBs which have a field or related parameter as a customer dialog box -- have looked for examples without success.

many thanks and regards
Ian Watson Yarm UK

View 2 Replies View Related

Queries :: Between Parameter With Null Values?

Jan 17, 2014

I am trying to alter this parameter to bring back all records if either beginningsalesrange or ending salesrange is left blank. I can't quite get it right.

Between [forms]![frmState]![BeginningSalesRange] And [Forms]![frmState]![EndingSalesRange]

View 13 Replies View Related

Queries :: Parameter Drop Down To Save User Input In Full Domain Field Name?

Oct 14, 2013

I have created a query with the parameter for the Domain field. however on the form the user enters this information via a drop down menu. i was just wondering could the parameter box be set to a drop down box as well to save the user entering in the full Domain field name?

View 6 Replies View Related

Parameter Query - Allow User To Select All

Oct 10, 2006

I want to be able to have multiple parameter queries, but the user needs to have the option of entering a parameter or not limiting the output at all. How do I let the user choose "all", or what do they type in so that nothing is excluded?

View 14 Replies View Related

How To Handle Multiple Null Values Using Form-based Parameter Queries

Nov 19, 2012

i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.

My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)

View 2 Replies View Related

Wildcard Query With User Input Parameter Not Working

Jul 12, 2007

I'm using an Excel spreadsheet that is importing external data from an access database in which I've got a field where the name of a person checking materials out is entered. it is currently set up, and I cannot change it, as a free form field. So folks enter information in a variety of ways.

For example, Larry Martin might be entered as "Larry Martin" or "Martin, Larry" or "larry.martin@somewhere.com". I'm trying to run a query that would look in that field for any entry with the string I enter, such as "Martin."

I've tried setting the criteria like this:

Like "*" & [Which Last Name] & "*"

However, when I try and run the query I get a message telling me the system is expecting two parameters.

Does anyone have any idea what I'm doing wrong? I've been banging my head against this for awhile now and am thoroughly stumped! All assistance, as usual, is greatly appreciated!

View 1 Replies View Related

Append Query & Null Values

Sep 7, 2007

Have the following scenario with perhaps inbuilt fatal flaw

Building an Inventory Management db and in the process of constructing the tools to move some inventory from 1 location in the warehouse to another (purely an internal transfer)

Part of my table design includes an allocated quantity field to record any outstanding orders for this inventory unit (I am planning on a built in LIFO system, which I haven't got around to contemplating yet)

All went well, the stock was decreased from the existing location using an update query. but failed to materialise in the new location using an append query

After much yelling and cursing at the offending query, finally did a search and found the following:

Update queries will not work if you trying to append a primary key value (knew that one) OR you are trying to append a null value into a field

In the real world, it may well be possible that I will have 0 allocations for a given inventory unit

Does anybody know a way around this seeming impass, or am I faited to rebuild my tables again?

Thanks in advance for any enlightenment

View 14 Replies View Related

Append Query Cannot Find Values In Form

May 15, 2005

i am trying to create an append query that gets 2 values from one table and a 3rd value from a form.

It gets the values from the table fine but always gives me a popup asking for the value from the form.

I have used the criteria build... and selected the loaded form and the field value that I am looking for. I have also made sure that there is a value in the field on the form.

is there a reason why the query will not grab the number in the forms field? or am I jsut not doing this right.

I have done this many times on a combo box and it works fine. It is jsut not working for a field that is typed in
Can anyone help me?

View 5 Replies View Related

Tables :: Append Query Not Working / Null Values?

Sep 24, 2014

I have an append query created to add files to a table from an imported excel file. The table to which I am appending (SubTBL) has a field names Observation. This field is not required. There is a relationship to another table (ObservationTBL) which has 3 records. The information I am trying to append includes 7000 records, about 4000 have observations assigned and they match the information in the ObservationTBL. The remaining 3000 have blank records for observation. When I run the append query, only those with observations are appended. The rest are not added because of "key violations". I removed the relationship between the ObservationTBL and the SubTBL and the append query runs. Then when I try to re-do the relationship it fails "Violates referential integrity rules".To be clear:

1. The records without an observation are blank. (There are other fields in this append that have blank fields also and they are not causing any problems)
2. The field observation is NOT set to required.

Is it not allowing Null records?

View 12 Replies View Related

Passing Multi Parameter Values To A Query

Aug 14, 2005

I have a query set up which needs to have different criteria at run time depending on values selected by the user. If no option is specified, I need to pick up all records with 'Nulls' in them else, if date is specified by user, I need to pick up all records with date > than specified date. The query is able to pick up the date value from an unbound text box in the form. I used the same field in the form and populated "Is Null" in the field and it does not work. How do I pass this as a paramater to the query from the form?
Is there a way around without setting up 2 sets of queries and reports?

Thanks,Priya :mad: :confused:

View 5 Replies View Related

Modules & VBA :: How To Set Parameter Values For Saved Query

Jun 26, 2013

I am using MS Access 2010 to export data into MS Excel 2010 spreadsheets.

I am just wondering: Is there a way to set the Parameter value for the query via VBA?

For example: There are 10 regional managers. When I click a button on a form, 10 sets of data per manager are going to be exported into Excel spreadsheets.

I have created a saved query named [For exporting] with a parameter [Manager Name] for the field [Master Table].[Manager].

The VBA for the button has 2 subs:
1) Sub 1 for the loop for 10 managers

Code:
...
strQuery = "SELECT DISTINCT [Master Table].[Manager] FROM [Master Table] WHERE ((([Master Table].[Manager]) Is Not Null));"
Set rstStores = CurrentDb.OpenRecordset(strQuery)

[Code].....

View 10 Replies View Related

Queries :: How To Update Combo Box Values Based On User Selection

Sep 25, 2014

I have a combo box which gets its values from sql server using a query which is called "get_query_reason", which works fine. Now I want to update combo box values based on a user selection, st string. Have written the code, but does not work:

Dim qDef As QueryDef
Dim Query As String
Dim st As String
Dim rs As Recordset
st = "SOV"
Set qDef = CurrentDb.QueryDefs("get_query_reason")

[Code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved