Queries :: Calculate Time Difference And Show Result Under Certain Criteria In Query
Jul 9, 2013
ID Up Time Down Time
John 18:00 15:00
Kelvin 08:00 08:05
Melisa 23:00 02:00
This is the Table , i need the Query result show IF [Up Time]-[Down Time] is >=3 hrs
Like Below :
ID Up Time Down Time
John 18:00 15:00
Melisa 23:00 02:00
IDUp TimeDown TimeJohn18:0015:00Melisa23:0002:00
I tried DateDiff("h",[Up Time],[Down Time]) in Field but POP out with error "Syntax error (comma) in query expression 'Table1.[DateDiff("h",[Up Time],[Down Time])]' " ...
View Replies
ADVERTISEMENT
Oct 26, 2014
I have to create a query in access that will calculate two Date and time fields [Date & Time Left]/ [Date Returned], need to figure out between the two fields. Trying to identify when the rep returned the call and the number of business hours (6:00am - 4:30pm) it takes to return a message in Ms Access 2010.
The only issue is the calculation has to be done by time and so I have to calculate what time they left the message(so the difference between [Date & Time Left] and [Date Returned) [Date & Time Left] and when the rep returned the message which is suppose to be [Date Returned] but the problem with this field is the data entry is in date format (10/9/2014, 00/00/0000) of Date and not Date and Time like the [Date & Time Left] field, so I don't know what to do now. Not sure what to do now not a database that create or have allot of control over.
View 4 Replies
View Related
Jan 22, 2012
DateDiff in a query
I am trying to calculate time difference between two time columns as follows in a query which has a few inner joins
Diff: DateDiff("h",[Table1.TimeStrat],[Table1.TimeStrat])
This gives problem, it is asking [Table1.TimeStrat] to be entered, where is the problem?
View 4 Replies
View Related
Sep 20, 2014
Trying to calculate the integer difference between Due_Date and Result_Date excluding weekends and holidays.
I have a table (Holidays) with the dates of the holidays in it. The table looks like:
ID Description Holiday
1 New Years 1/1/2014
2 New Years 1/1/2015
So, if Date_Due: 9/25/2014 and Result_Date: 9/29/2014, then TAT = 2
Since 9/27/2014 and 9/28/2014 are weekends they are excluded from the calculation and only that Thursday and Friday are used in the calculation.
Code:
Private Sub Result_Date_AfterUpdate()
[TAT] = NETWORKDAYS(Due_Date, Result_Date, tblHolidays)
End Sub
View 7 Replies
View Related
Jan 22, 2014
I set my query criteria to my [Forms]![Form1]![Combo4].
After I key a criteria into combo4 , then I open again the query table ,
It did not show up any result , why ?
No combo4 don't have any event.
View 1 Replies
View Related
Aug 3, 2005
Hello,
I,ve made the following date fields in a form: begintime, endtime. I've also made a field Diff that calculates the difference between the two by the code : Diff = Format([begintime] - 1 - ([endtime], "Short Time").
Bij this code you can calculate the difference even over night.
But now I've got to calculate the part of the time someone worked between midnight and 06:00AM if that person indeed worked in those hours.
e.g. someone started at 16:00 end ended at 03:30. The part of time I need = 3:30
e.g. someone started at 01:00 end ended at 11:00. The part of time I need = 5
How can I accomplish this? I hope someone can help me because I'm :confused:
Thnx Remco
View 4 Replies
View Related
Oct 25, 2014
I have to create a query in access that will calculate two Date and time fields [Date & Time Left]/ [Date Returned], need to figure out between the two fields. Trying to identify when the rep returned the call and the number of business hours (6:00am - 4:30pm) it takes to return a message in Ms Access 2010.
Code:
SELECT [Message Tracking_tbl].[Date & Time Left], [Message Tracking_tbl].[Date Returned], [Message Tracking_tbl].ID
FROM [Message Tracking_tbl];
View 14 Replies
View Related
Jun 2, 2015
I'm trying to calculate the difference between start and end time, which works fine with:
Total Time: DateDiff("n",[tblTaskTimes]![StartTime],[tblTaskTimes]![EndTime])
However, this is for a database that calculates billable time in 10th of an hour. So, for example, 1 hours would be 1, 30 minutes would be .5, less than 6 minutes would be .1.
The format for this expression is set up to a general number, if that matters.
It's gotta be something in the formula like multiplying this by 24 (for 24 hours) and then dividing by something. Nothing I'm trying is working.
View 7 Replies
View Related
Jan 30, 2014
I have a subform in which I want to calculate the difference between a start time and finish time, the problem I am having is when the start time is on a different date to the finish time
Start 23:15 on 14th Jan finish 00:015 on 15th Jan, also I want the answer to be the number of minutes. The fields I have are
BatchStartTime Short Time
BatchFinishTime Short Time
BoilTime ([BatchStartTime] - [BatchFinishTime]) General Number.
There are many batches to enter per job and the MainForm has the StartDate as I didn't want to enter the StartDate for each batch.
View 4 Replies
View Related
Mar 21, 2013
I am VERY, and I mean VERY new to Access. I've been racking my brain all afternoon and googling like crazy. I just completed two levels of training on Access 2010 and have never worked with the program before. I already set up my tables and now I am on to querying. I have a table with several columns, two of which are "Start Time" and "End Time". I already created a query using the DateDiff function to calculate the time difference for each record. It output a new field with the time difference in hours. Now, I want to sum the totals of the time differences by month and I cannot for the life of me figure it out. My new query has Date (m/dd/yyy) and Hours.
View 14 Replies
View Related
Jan 27, 2015
I am designing mileage database in access 2010.
table:
1- maintbl (date, truckNo fillinQty,rate,cost, odometer, mileage)
Query:
1- mainquery (based on maintbl)
Form:
1- mainfrm (Based on mainquery)
i want to calculate mileage :
example:new odometer reading - previous odometer reading / filled in qty
example: 2000 km - 1000 km / 200 liters = 5 liters /km
Objective: How query will automatically calculate the difference of new odometer reading and last odometer reading for a specific truck number and divide it with filled in qty of fuel?
View 2 Replies
View Related
Sep 14, 2014
I have the attached database which calculate the Difference between dates.I have also two problems like i shown in the image
Code:
Option Compare Database
Option Explicit
Sub Recalculate()
Dim rst As DAO.Recordset
Dim dff As Long
[code]...
View 4 Replies
View Related
Feb 8, 2014
I have a AS400 database table that stores time in the following manner 70535 (hour, minutes, seconds). Utilizing access 2010, I have used the left, mid, and right command to separate hour, minute, and second into their are separate table values 7 05 35. The AS400 database stores 3:15:30pm in the following manner 151530.
At this point, I used the string function and created the following table value 7:05:35.
Overall, I am needing to convert 70535 to time and then calculate lapse time where the employee name is the same. my database has about 2500 unique employee records per day. I am utilizing a query to perform the above.
date name tstime hour minutes second time
2/8/14 NJohn 151530 15 15 30 15:15:30
View 5 Replies
View Related
Apr 22, 2013
I am trying to calculate the difference in dates between two fields. How do I find the difference in days between field one which contains the date 04/12/2011 and field two which contains the date 04/12/2013? I have tried to use the datediff function, but it keeps telling me it doesn't recognize the field name, even though the spellings correct.
View 3 Replies
View Related
Nov 27, 2014
I am struggling with calculate difference between two query table values, I first created a make a table query(current meter reading) which contains one column called "meter read" , and I created a second make a table query(previous meter reading) which also contains "meter read" column, I linked those two make table queries to calculate the value difference between two date, how can I create a form to calculate diff between any two date?
View 3 Replies
View Related
Feb 21, 2015
I have never created a single query that is this complicated.
I have a time card database that I created back in 2003 and over the years more and more new task have been added to track volunteer hours has been incorporated into it.
The current task at hand is to determine if each member has achieved or meet certain requirements each year.
They are attend 8 or more meeting and check into 5 or more nets and be Net Control Operator for at least 1 radio net and be involved with 1 or more Public Service events. Sounds simple right?
I have a table that contains all the information that is need to get the result I want but am having a problem getting that result with a single SQL query. Everyone you talk to says use SQL query to obtain calculated vales and never store/save them.
So from the work table below meetings consist of 4,5,6,8,9 and nets consist of 10,11,14,15 and events consist of 2, 13 and the NCOflag is T/F.
So those are all the parts, count the number of meetings, nets, events and NCO and set the meets requirement flag T/F
I keep getting "You tried to execute a query that does not include the in specified expression <name> as part of an aggregate function. (Error 3122)"
In this case it keeps complaining Callsign.
You did not enter an aggregate function in the TRANSFORM statement.
Here's the statement I created:
SELECT [Work Hours].Callsign, [Work Hours].[Work Code], [Work Hours].NCOflag,[Work Hours].SubMtg, [Work Hours].SubNet, [Work Hours].SubNCO, [Work Hours].SubEvnt, [Work Hours].ReqSubTotal
FROM [Work Hours]
WHERE (((Year([Date Worked]))=(Year(Date()))))
[Code] .....
It is failing on the first HAVING (([Work Hours].SubMtg) =Sum(). I have tried many variations and changes but don't see what is wrong with it.
View 2 Replies
View Related
May 6, 2014
I am wanting to get an expression that will return the difference in years and months between 2 dates. Specifically, I want to know peoples ages in years and months based on a person's D.O.B and todays date. I have managed to do it in years:
Expr1: DateDiff("yyyy",[TBL_EmployeeDetails]![D_O_B],Date())
and in months but I would like to know how to return the difference in years and months.
View 1 Replies
View Related
Jul 20, 2015
I have a pop up reports tied to my form so the usere can press the see list report of all the equipment they just scanned in or out of the building. I am useing the Date/Time data type (General Date) What I would like to get out of the query is when the user clicks the button it will show all entries from the time right before the button is pressed AND through 5 minutes earlier. (That would be the time that the user would of started scanning the equipment.
This is my current criteria : Between Now() And Date()
This is returning all transactions for the day. I really only want all transactions for that session.
View 3 Replies
View Related
Mar 20, 2013
I have a simple query like below.
Code:
SELECT [score_admit] / SELECT [score_discharge] AS Ratio, facility_type
FROM tbl_test
group by facility_type;
It's really just based on one table, but what I'm trying to do is to calculate the ratio for the scores, then arrange the result based on facility types.
The error I get is a syntax error the SELECT statements.
View 3 Replies
View Related
Sep 28, 2005
Hi All
I try to create a query based on Table1 and fields Date and Result. Is it posible to get a query that calculate two amount of Result field when that field is null and not null?
That two values of Result field I will use to create monthly Pivot report in which each bar will display amonts Completed and NonCompleted result.
Thanks.
View 1 Replies
View Related
Dec 30, 2007
Hi all, bit stuck on a query I'm working on.
What I have is a table with three columns: Name, Start, End (the last two being a start time and end time column in 24 hour format). What I need to do is calculate the time interval in minutes between the start and ending times (this has been done already and quite easily). What I find myself stuck on is when the ending time exceeds 00:00 and the start time is before this. IE: 23:30 start, 00:30 end, which is 60 minutes (duh). I wind up getting a 23 hour time.
Is there a way that I can code up a query (has to be a query as the rest of the DB results rely on the correct minutes per person)? Appreciate any help in this
View 5 Replies
View Related
Mar 25, 2014
I have two queries. The unique key in both queries is GUID for katalogposition.
One is showing me records which has an product end date (Produkt slut dato) between today and end date of next month. This query works fine and is called q_termination.
The second one shows me unmatched records in the first query (q_termination). The query works fine and is called yq_NonTermination.
The goal is now to show me records from the first query "q_termination" that fullfill one of two criterias.
1. No match in second query "yq_NonTermination"
2. Match BUT product end date (Produkt slut dato) is greater than the match in "yq_NonTermination".
I have made a left join query on the field "Dublet_Lagervarer". From the join query the goal is to show me only q_Termination.Guid for Katalogposition number 47 and 134008.
How can I do that? Is there another way to do it? Please see attachment.
View 3 Replies
View Related
May 17, 2013
I have a form that request information from the user (StartDate, StartTime, EndDate and EndTime) the problem is that it's not working. The only way I can get any data to show is when I remove the StartTime and EndTime. Only then will it pull the items from the StartDate and EndDate.
Here is what I have as my criteria: Between [Forms]![OpPROD_ALL]![StartTime] And [Forms]![ OpPROD_ALL]![EndTime] And Between [Forms]![ OpPROD_ALL]![StartDate] And [Forms]![ OpPROD_ALL]![EndDate]
The users will be able to request a report based on a start and end date along with a start time and end time.
Side note: this is to pull date for 3rd shift (Example) 4/14/2013 10:00PM - 4/15/2013 10PM
View 1 Replies
View Related
Sep 8, 2005
I currently have a table with the following fields:
dtmDateintPressintCycleintProgramintLotysnAxialdtmFStartdtmFFinishdtmPStartdtmPFinishdtmDStartdtmDFinish
How might I go about querying the difference between dtmDFinish and dtmFStart for multiple records?
EX:
09/07/05-1-1-1-5681-NO-12:30-1:00-1:30-2:00-2:30-3:00
09/07/05-1-1-1-5681-NO-3:30-4:00-4:30-5:00-5:30-6:00
09/07/05-1-1-1-5681-NO-6:15-6:45-7:30-8:00-10:30-11:00
Would return two results: difference for 3:30-3:00 = 30 minutes and difference for 6:15-6:00 = 15 minutes
Thanks for your help!
View 6 Replies
View Related
Jul 24, 2014
I have a form (frmMetrics) with 2 Combo Boxes: "Year" and "Quarter" These are just number fields (which might be my problem?)
I have a date/time field in a query, and I want the criteria to be based off the year and quarter selected in frmMetrics.
View 2 Replies
View Related
Sep 12, 2013
I have one table in my access, and out of that I need to show a queri that will show only following result in 2 columns ID (same as original table)
SCHOOL_YEAR (all the students that are):
1 year and 1 year (repeat) as 1 year
2 year and 1 year (repeat) as 2 year
3 year and 1 year (repeat) as 3 year
Not to show dripouts, na and finished
Original table:
IDNAME
11 year
42 year
53 year
10dropout
11finished
12n/anot categorized
131 year (repeat)
142 year (repeat)
153 year (repeat)
View 3 Replies
View Related