Queries :: Calculate Percentage In Query
Apr 16, 2013
How to calculate the percentage of kilometers per order compared to the total number of kilometers per carrier.
In the attached screenshot send queries where I need formula.
Mileage on the orders of the field called "Korkma" . The formula should look like: # [Korkm] / [total kilometers per carrier] #.
I do not know how to get the total mileage driven by the carrier (the carrier is in the query in the Field Name Plate) for the month.
For example:
date 1.1.2013.,Plate:Pribus Korkm= 37
date 2.1.2013.,Plate: Pribus,Korkm=56
date 10.1.2013.,Plate: Pribus, Korkm= 70
Formula: [37]/[163] = 0,23
[56]/[163]= 0,34
[70]/[163]= 0,43
View Replies
ADVERTISEMENT
Apr 19, 2013
To calculate the percentage of the number of passengers in the total number of passengers per single order using query:
Code:
SELECT
Code:
A.Date, A.Plate, A.Pax, A.Agency, A.Code, IIf ([pax]> 0, Round ([Pax] / (SELECT Sum (Pax) FROM Sheet2 as B WHERE B.Date = A.Date and B.code = A.code), 2), 1) AS KOR
FROM Sheet2 AS A
ORDER BY A.Date;
Query works fine in all cases except one, and that is when the encounter a same order in one day
01/04/2013. D_1 0pax
01/04/2013. D_1 5pax
in this case the formula gives a coefficient of 1 to 0 passengers and coefficient of 1 to 5 passengers, should be given a score of 0 0 of passengers and 1 to 5 passengers
View 1 Replies
View Related
Apr 9, 2014
I obtained data for earnings by industry for men and women over time (5 years). I developed crosstab query that showed the average earnings for men and women for the 5 years.
Now I want within this query to calculate the differential between men and womens average earnings and calculate a percentage within this crosstab query. I tried to use Expressionbuilder with little luck.
View 6 Replies
View Related
Jul 20, 2015
I'm very new to Access and I'm attempting to write an expression in a query that will calculate the % of the count of "Exchange" field (Exchange is a text field and is grouped and the count based on each unique name) where the total count is based on the filter where "Group" = 'FS' or 'S'.
The below seems to work, but there is a better way of going about this (especially if I have to add more filter criteria). I added a pic of the query I'm trying to build.
PercentofTotal: (Count([Exchange])/DCount(Count([Exchange]),"[Holdings]","[Asset Group] = 'FS' OR [Asset Group]='S'"))
View 11 Replies
View Related
Jul 9, 2013
I am trying to count how many of the "same" and "differences", as well as calculate the percentages of the number of "same" over the total amount. To clarify, I work at a nursing home, and I need to calculate the number of people who were admitted to our facility and then to the hospital for the same diagnosis, and a different diagnosis. Then, out of the total number of people who were admitted to the hospital from our facility, I need to calculate how many of those people had the same diagnosis or a different diagnosis.
Also, I need to categorize these diagnosis by each type of diagnosis.
View 14 Replies
View Related
Mar 27, 2013
I have this table
Year AvgOfValue
2005 109.061690295772
2009 106.801581389669
I have to calculate the percentage of change of the values. I have very basic knowledge. How can I make a query to calculate the percentage of change?
View 2 Replies
View Related
Mar 22, 2008
In a report, I need to calculate the percentage of clients that respond "Yes" to a question on a survey. I need to create a query that will return the count of the number of "Yes" responses, and the number of total responses.
For example, if 10 clients complete the survey, and seven respond "Yes", I need the 2 fields in the query to be 7 and 10. So far, I have only been able to do this using multiple queries.
Thank you.
View 1 Replies
View Related
Oct 26, 2006
Does anyone know how to add a column to an existing table that would calculate percentage?
Thank you very much in advance!!!
View 3 Replies
View Related
Jan 7, 2008
Hey,
I'm unsure of how to do this one, any help would be appreciated.
The database I'm working on has around 2000 records within the parent table. These reflect projects around the world.
the child table has records on how much these projects cost.
I would like to calculate the % of projects cost less than £50,000, then, the % of projects between £50,000-£100,000 and so on.
i'm not entirely sure how to do this, anyone have any ideas?
Thanks
View 1 Replies
View Related
May 4, 2006
Hi, Thanks in advance. I am trying to calculate percentage, it has to round to the nearest, and also if the percentage is greater than 100 then it has to write 100%.
formulae: c=(a/b)*100,
example: c=(8/3)*100 =266.66% but this is more than 100% so i need this as 100%
example2: c=(2/3)8100=66.66% but i need it to round as 67%
i've 3 controls on a form a,b,c. so c has to calculate by itself when they enter data on a and b.
thanks,
sam
View 1 Replies
View Related
Nov 7, 2013
I have an Access 2009 report that displays the sums at the bottom of some columns. Is there a way to calculate and display the percentage one sum is of another?
Column1 Column2
Total 12,000 9,800
Percentage 100 % 81.7 %
View 1 Replies
View Related
Feb 11, 2013
I have two fields CountOFAppeal Description and Amount Solicited.
I just want to get the percentage of response.
So this is what I used:
=[CountOfAppeal Description]/[Amount Solicited]*100
When I go into the properties to format it to % and add decimal places I get a crazy number
2520.46% When it should be 25.20%
When I change the format to general number the decimal point is in the right place 25.20.
View 2 Replies
View Related
Dec 18, 2014
I have two numbers, i need to calculate how much percentage of one is the other. E.g
num_1 = 100
num_2 = 10
percent = 10%
Users enter a dollar amount (retainer) and my code should calculate the percent of the total proposal amount.
Actual Code
Private Sub cmdSubmit_Click()
Dim intProposalTotal As Double 'if i use interger i get "overflow" error
intProposalTotal = Nz(DLookup("ProposalTotal", "qryPropsalTotalForRetainer", "proposal_id=" & Me.proposal_id), 0)
[Code] .....
billing_retainer_percent is formatted to Percent with 0 decimals. In the actual table Type - Number, Format - Percent, Field Size - Single. What i get is 100% instead of 10%.
View 4 Replies
View Related
Sep 12, 2013
What I'm looking to do is calculate the success rate (%) of compliance rates with Quality Control paperwork. Essentially, each record has 12 "check box" fields representing the different QC sheets that are submitted each day.
QCflavourChange
QCfillerOperator
QCblowMoulding
QCtorqueTest
QCnetContents
QClabeller
QCpacker
QCpalletiser
RMpreform
RMclosure
RMlabel
RMcarton
I have been able to find the code for counting the success rate of a specific type of QC sheet across multiple days worth of testing, eg:
=Sum(IIf([RMpreform]=True,1,0))])
But I have been unable to determine how I can count the total of all the successful fields listed above, across a single record.
View 7 Replies
View Related
Aug 5, 2014
I am trying to set up a calculation between two values to show the percentage difference. In Excel, for example, I would have two values, £905,175 and £891,563, and I would enter =A1-G2)/ABS(A1), which would then return a plus or minus percentage value. how to do this in a query using Access 2010?
View 3 Replies
View Related
Apr 25, 2014
I have a database which tracks the performance of my team and how long it took them to send something out to the customer. We have a target of 5 minutes.
So I quite a few queries to drill down this information. I have a summary query that takes that information and tells me the total amount of things sent, the amount of things sent in time and the amount of things sent late.
My team have to get at least 95% out on time. So how would I go about adding this bit into the query. The calculation is:
The amount sent on time / the total amount * 100
But is there anyway to add this into a 4th column displayed next to these figures?
Looking around a few people have talked about SQL but I no nothing about this and it seems quite daunting, is there a way to do this as a calculated field?
View 1 Replies
View Related
Apr 12, 2013
I have created a cross tab query that contains a row heading for Entity and Total Cases. I would like to have a percentage of the Case Total for Each Category as well as the count for each category. It works fine for just the counts and here is the sql behind it:
TRANSFORM Count(CASEDATA.CASESTATUS) AS CountOfCASESTATUS
SELECT IUIDCODES.CODEDESCRIPTION, Count(CASEDATA.CASETYPECODE) AS CountOfCASETYPECODE
FROM (CASEDATA INNER JOIN CASESTATUSCODES ON CASEDATA.CASESTATUS = CASESTATUSCODES.CODEID) INNER JOIN IUIDCODES ON CASEDATA.IUID = IUIDCODES.CODEID
WHERE (((CASEDATA.CASETYPECODE)=63) AND ((CASEDATA.FYSTATUS)=6 Or (CASEDATA.FYSTATUS)=7 Or (CASEDATA.FYSTATUS)=8))
GROUP BY IUIDCODES.CODEDESCRIPTION
PIVOT CASESTATUSCODES.CODEDESCRIPTION;
View 2 Replies
View Related
Mar 28, 2015
I need to do a update query with prompt to input a percentage.
View 11 Replies
View Related
Apr 14, 2015
I've just made this query at work, it brings up the results from a database of telephone surveys. about going all gestapo on the table names and codes, I'm unsure as to how told off I could get for placing identifiable images on the internet
query.png
basically I would like to extend this query so it shows the sum of the "CountOfQ1 22" column and also shows what percentage of that total each entry in the "Q1 22" column is.
This will enable me to have results for the day sent to me at home every night at close of business as the person supervising the call centre at the time can run the query and email me the results.
View 4 Replies
View Related
Jul 15, 2014
I have a field that is giving me the number of business days between a period of time and then I want to subtract that number - the person's PTO time to see the actual days they were available...when I simply type the number in (see below) it works great but I want to set up a prompt that will ask me how many PTO Days to calculate as it will be different for each person I am quering...is this possible?
View 9 Replies
View Related
Feb 5, 2015
Is there a way to calculate the mode value in a query?
In a summary query, I need to return the value that shows up the greatest number of times in a certain column of a table. Is there a function built in to Access or an easy way to perform this, or do I have to make my own function to handle this?
View 5 Replies
View Related
Dec 31, 2014
I have two excel tables that I linked in access. From excel tables I created query that gives me all data I need.
First table has data of periods and prices of apartment per period. For example:
PropertyID 1111
PropertyName Apartment Zagreb Mila
StaringDateOfPeriod 1.1.2015
EndingDateOfPeriod 1.7.2015
PriceForPeriod 100
.
.
PropertyID 1111
PropertyName Apartment Zagreb Mila
StaringDateOfPeriod 1.7.2015
EndingDateOfPeriod 31.12.2015
PriceForPeriod 120
Now as you can see I have apartments with prices that change per periods.
Second excel table gives me information of total paid service that customers need to pay , number of days that he will stay and CheckIn and CheckOut dates of those guest.
In calclutated fields in query I created calculations like TotalyPiad(from 2. table) - OwnerPrice*TotalyNumberofDays . I guest good result IF i have reservations that matches or is it BETWEEN StartDate and EndDate of periods.
BUT If I have reservation that is overlapping , where CheckOut of guest is 1 or more days > that EndDate of selected period I have problem with calculation because my calculation is based on WRONG price in that period.
For now what I manage to do is to create separate field in query where I calculated number of days that are out of range
CHECK_IN - StartingDate of period
CHECK_OUT -EndingDate of period
Check-in date - starting date of reservation of guest
Check-out date - ending date of guests reservation
nabavna cijena - owner price
Code:
PreklapanjePerioda: IIf([Check-out date]>[CHECK_OUT];[Check-out date]-[CHECK_OUT];Null)*[nabavna cijena]
But still when I calculate those number of days I multiple those number of days with old period.
So How can I MULTIPLE THOSE NUMBER OF DAYS WITH PERIOD +1 , I meen next period not this old one just for those days that are out of range? [CHECK_OUT] +1 doesn't work it just add extra day in my CHECK_OUT filed
My final idea is :
Separately calculate in one field number of days that are out site of range
Calculate number of days of reservation of guest that are in range
= make sum of those two fields
From that I will create report which I will send to our owners of properties (number of reservations, reservations details, price that they need to pay to us ...)
I also thought this could be possible to make using VBA but I am still not skilled anough in it. Also I was thinking of creating calendar where I would that add those two queries but how to create simple calendar in Access. Is there some template for simple calendar in Access?
View 11 Replies
View Related
Feb 8, 2014
I have a AS400 database table that stores time in the following manner 70535 (hour, minutes, seconds). Utilizing access 2010, I have used the left, mid, and right command to separate hour, minute, and second into their are separate table values 7 05 35. The AS400 database stores 3:15:30pm in the following manner 151530.
At this point, I used the string function and created the following table value 7:05:35.
Overall, I am needing to convert 70535 to time and then calculate lapse time where the employee name is the same. my database has about 2500 unique employee records per day. I am utilizing a query to perform the above.
date name tstime hour minutes second time
2/8/14 NJohn 151530 15 15 30 15:15:30
View 5 Replies
View Related
Jan 21, 2014
I have a problem with calculating the total qty of two fields.
Code:
QtyMapics: Nz([MapicsQty];0)
QtySubComp: Nz([SubComponentQty];0)
TotalQty: [QtyMapics]+[QtySubComp]
When I calculate the values of the fields it pastes the values after each other.For example: if you have the values 1 and 2 (which should become 3) then the result is a value of 12.I've tried changing the function to SUM() but that didn't work.The reason I am using NZ() is due to the fact that some values have a NULL value in one or both of the fields and if NZ is not included it will not calculate anything.
View 4 Replies
View Related
Oct 20, 2014
tell me if it is possible to calculate a value in a column in a datasheet view of a query. i.e. I want to take a value in 'Column A' and subtract the value in 'Column B' to create a value in 'Column C'?
View 2 Replies
View Related
Jun 15, 2015
I'm trying to build a query with an iif statement to calculate expiration dates within a query. For some reason what i'm trying to do is not working as expected.
Here's the situation. Every employees with an exception of two employees in the company has an expiration 2 years after the class took place. The two exceptions are the certified instructors who's training certification is good for three years.
I've created a query with the employeeid, training subject, and maxoftraining date.
I'm trying to write an if statement to give me the expiration date based on the above information. Here's what I have so far; however its not calculating based on the criteria.
Expiration: IIf([tblemployee]![EmpID]=1 Or 2,DateAdd("yyyy",3,[maxoftrainingdate]),DateAdd("yyyy",2,[maxoftrainingdate]))
At this point in time, all "expiration" dates are showing + 3 years rather than just the Employee ID's 1 and 2 and the rest +2 years.
View 2 Replies
View Related
