I have designed an access application that logs emails that come into a department. However, the team leader has asked me to create a report to work out if emails were answered within a 24 hour period.
Is there a method to do this. It is not something I have attempted to do within access before.
I am using access 2013 and have an issue creating a query with employee hours for a two week period.
For starters I have a table with the following:
Employee Number, Date, Time in, Time out, Description, Rate Code, Week end, Pay Period. (there are a couple others but they are not needed for the query)
My table is set up this way so that each employee can clock in and out 1-4 times a day based on what they are doing. For example I may work from 6-8 in the office then 8-10 in the field. The office has one rate code and the field has a different one so i cant just be clocked in from 6-10.
At the end of the pay period I create a report and send it to an accouting firm who does the payroll. Right now I have to manually enter in each employees time. I was hoping that by using this table I could create a query that will give me the calculations I need in order to create the report.
In my query (to Start) I need to have the following with it set up per pay period.
Employee Number Rate Code Regular Hours Overtime Hours
How to set it up so that it calculates the hours based per rate code with the given pay period.
I am trying to get a count from a table, but only for a certain time period. Here is a little bit of my table:
STRMIDtrDateDT trDT
1617 3/25/2015 7:30:00 PM0
1530 1/8/2015 4:40:00 AM10
1532 1/12/2015 9:20:00 AM60
1533 1/14/2015 4:50:00 AM1
What I am currently doing is querying a table for the Count(*) for the day before. This works all well and good, but now I am wanting to break it down by a time range from the trDateDT field.
I want to calculate decimal hours duration taken for a job starting before and finishing after midnight.
I have something that works but it seems cumbersome.
Hour(Format([Job]![Start_time]-1-[Job]![Finish_Time],"Short Time"))
+ (Minute(Format([Job]![Start_time]-1-[Job]![Finish_Time],"Short Time"))/60)
Access Query. I am creating a time sheet / pay roll database and I want to be able to get a total of the daily hours in a query.
For example I have 'Mon Start' and 'Mon Finish' for Mondays in/out times and I have a 'Mon Total' which gives me the total hours worked for Monday.
The problem I have is that Mon Total only works if the hours are say between 07:00 and 17:00, anything after midnight (00:00) like 21:00 to 07:00 and 'Mon Total' goes crazy !!
At the moment 'Mon Total' is the result of CDate 'Mon Finish' - 'Mon Start' (bit rough I know).
I create form to calculate the difference between clock-in time and clock-out time, what is the code to do that
I have 2 fields :
field 1 name clockin
field 2 name clockout
I have a text box to display result equal the period between time1 and time 2...
I have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday
EXIT FUNCTION
ELSE
IF [PunchOut] ISNOT Between Midnight and 0559 hours
EXIT FUNCTION
ELSE
DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
I'm currently stuck on trying to create a worksheet which calculate the balance remaining at the end of each Monthly Payment Period.
Monthly Payment Period: 1 to 300
Initial Balance: balance outstanding at the beginning of the Monthly Payment Period.
Interest: calculated by multiplying the Initial Balance by the APR (5%) divided by 12
Balance Remaining: calculated by adding the Interest and subtracting Total Monthly Payment.
The final Balance Remaining should be exactly £0.00.
I have a AS400 database table that stores time in the following manner 70535 (hour, minutes, seconds). Utilizing access 2010, I have used the left, mid, and right command to separate hour, minute, and second into their are separate table values 7 05 35. The AS400 database stores 3:15:30pm in the following manner 151530.
At this point, I used the string function and created the following table value 7:05:35.
Overall, I am needing to convert 70535 to time and then calculate lapse time where the employee name is the same. my database has about 2500 unique employee records per day. I am utilizing a query to perform the above.
date name tstime hour minutes second time
2/8/14 NJohn 151530 15 15 30 15:15:30
I need to calculate the difference between to datetime fields. However, i need to exclude weekends, holidays and non-business hours. I also need to return the result in hours, minutes, seconds.
can this be done. if so, does anyone know how to do this, or is there code that i can implement and save for future uses.
thx,
john
I want to subtract 8 hours of work of the Result of employee work hours/
There is attachment...
I have to create a query in access that will calculate two Date and time fields [Date & Time Left]/ [Date Returned], need to figure out between the two fields. Trying to identify when the rep returned the call and the number of business hours (6:00am - 4:30pm) it takes to return a message in Ms Access 2010.
The only issue is the calculation has to be done by time and so I have to calculate what time they left the message(so the difference between [Date & Time Left] and [Date Returned) [Date & Time Left] and when the rep returned the message which is suppose to be [Date Returned] but the problem with this field is the data entry is in date format (10/9/2014, 00/00/0000) of Date and not Date and Time like the [Date & Time Left] field, so I don't know what to do now. Not sure what to do now not a database that create or have allot of control over.
Hello, i have a table with the fields: "employee_number", "shiftdate" "department" "basic_hours", and "over_time"
And a query named "employee_hrs" looks at the fields in this table, i would like a new field in the query to be able to calculate the total hours for all employees together but for each department.
eg the total of: basic hours + overtime for department A)
the total of: basic hours + overtime for department B)
and so on for each department
would only like to show one instance of a department (distinct) with the total hours done by all employees for that department?, if any one could please help me out that would be great!?
Let me just start out by saying that when it comes to Access, I ride on the "little bus", so I apologize in adavance if this is a lame question.
I have a table with two date/time fields. One for reporting the date and time of an issue start, the other for the date and time of an issue ending. I'm trying to find a way to get the number of hours between the two without including weekends. I found a module on mvps.org that excludes workdays. However it doesn't seem to work in this case. For instance, if I put in an issue start as 02/10/2006 7:30 am, and the issue end as 02/13/2006 6:45 am, it only counts it as one workday. It won't count the 13th as a workday until the time is >= 7:30 am.:confused:
I'm simply stumped. Any help would be greatly appreciated.
Thank you,:)
ID Up Time Down Time
John 18:00 15:00
Kelvin 08:00 08:05
Melisa 23:00 02:00
This is the Table , i need the Query result show IF [Up Time]-[Down Time] is >=3 hrs
Like Below :
ID Up Time Down Time
John 18:00 15:00
Melisa 23:00 02:00
IDUp TimeDown TimeJohn18:0015:00Melisa23:0002:00
I tried DateDiff("h",[Up Time],[Down Time]) in Field but POP out with error "Syntax error (comma) in query expression 'Table1.[DateDiff("h",[Up Time],[Down Time])]' " ...
I have a problem with Microsoft access 2003. I want to design a Check in/Check out Time Data base for my university final term project. In this data base I need to show the total of the working hours of each personnel in a month.( for instance: 124 hours and 55 minutes in one month). But adding up the hours, when the time variable reaches 24 then time automatically goes back to 01:00. As a result, the correct total hours cannot be calculated....
View 1 Replies View RelatedHow do I enter and store a period of time that may be of any length: years (.. unlikely but ...), days, hours, minutes, seconds (or even micro seconds) that I can later add to other dates or times stored in my database? How do I create a sensible data entry mask for yyyy/ddd/hh:nn:ss.999 and then convert this to a field compatible with date/time functions? And what format should this data take (be converted to ..?) and be stored in?
View 2 Replies View RelatedCan you help we have a data with a list of jobs that scores points, I need to build a query or scirpt that will add 5 points every 30 day fro the date the job was submitted this will help old jobs come the top of the list.
View 1 Replies View RelatedHi,
Over the past three months I have been trying to develop an application which can repeat appointment entries.
I would like to have the option to repeat an appointment entry for a given number of weeks.
For example if an appointment entry was placed for today (Wednesday), there would be a command to create additional duplicate enties for the same day of the week for a given period of weeks ie say every Wednesday for the next 52 weeks.
Any help on how I could approach this would be very much appreciated.
Thanks
Hi there
I have created a database in Access XP (2002). In a nutshell, the database records numbers of people attending a seminar; which can take place any number of times per week, and so hence can take place any number of times per month.
I have set up the query so that it can run immediately after a seminar to show the attendants who attended the seminar on that current date "Date()" in the criteria box. However, how would I go about setting it up so that it shows who attended every seminar in the current week or month?
We sell products out of vending machines and once in every few days (time span between readings may be different every time) read data from the machines using flash drive. Each reading from all machines produces an Excel file:
Reading_Date | Machine_ID | Product_ID | Amount_sold
2008-04-08 | 1 | 1 | 26
The only date that we have is the day on which the data has been read and this tells how many sausages were sold from the date of last reading till the date of current reading (after each reading counters are set to zero).
The problem is to get average amount of product X sold from machine Y on every calendar day. For a total rookie like me it seems like creating another column that would divide the Amount_sold by the number of days between two consecutive readings and put this average amount for every calendar day between these two readings. May it be done this way? How? Another way? How? I would be very grateful if anyone could help me and explain the solution in an accessible way.
I've been struggling with getting a report to simply count records (I don't need any detail other than the counts). Here is what I have:
Table CompressorRoundsT contains these fields (many more actually but these are the ones I care about for this purpose):
Date, Shift, Round
Possible records in the shift field are 1st, 2nd, 3rd and the round field has Rnd 1 and Rnd 2.
For each date, I need to count the number of records per shift and per round. For example, the report should show that on June 7th, 1st shift has 14 records for round 1 and 14 records for round 2. Same for 2nd and 3rd shift. I don't need any other details of what the records contain, just the counts.
I've had some success but the layout ends up too spread out because it is including the individual records instead of just showing the counts and it isn't grouping the way I want.
It's a report for management to see how many readings (rounds) were missed in a period of time.
HI all,
I am still new in Access databases :o
I have a table with 'General Date' column. So I have to create query wich extracts records between Last record (via Date field) and 'for example' 10 days before. But Last record in Date column may differ from Now().
When this is done I have create calculations with extracted records using agregate functions.
I'm trying to use Last function for Criteria putting it into Date field and substracting with -10 (for 10 days) but it doesn't work.
Please help! :confused:
I have a pre-established database with a form that calculates total sales and tax for a time period i specify. I want to add a box that will display the number of sale records. Ex. if i had sales of 50,000.00, and that came from 200 sales i want the box to show the number 200.
View 1 Replies View RelatedCould I change my unbound textbox (txtperiod) on the Report to display the time period.i.e.
Weekly, Monthly, Quarterly
Criteria is BeginDate and EndDate on main form.
I'm in the process of creating a database in Access 2010 that has two front ends, basically. What I want to be able to do is lock out one of those front ends for a specific period of time every day.
View 2 Replies View Related