Queries :: Change Format Of Date / Time?
Aug 5, 2013I am struggling to change the format of 2013-07-29 11:33:03.6160000 to show dd/mm/yyyy
View RepliesI am struggling to change the format of 2013-07-29 11:33:03.6160000 to show dd/mm/yyyy
View RepliesIn my query I have a date field and it is half UK british and half US. I have my regional date set to UK on my laptop.
how to change it to same date? I don't mind either, I just want it to be consistent.
I am having difficulties changing a date/time field like '22/04/2013 09:14' to make it look like '2013-04-22 09:14' using a query.
View 3 Replies View RelatedI wanted to assign the field "Number of magazine" with special format based on date/time format but showing only year and month in the format: "yyyy-mm".
So in property of this field in format I put yyyy-mm and in input mask I type 0000-00;;-
I also created the form based on the table containing above field and I defined format and input mask for corresponding formant in the same way like at the table.
But if I try to type date for example 2014-01 in text box of the form it comes up with the full date 2014-01-01. Why does it do like this? What do I do incorrectly?
Hi, I'm newbie.
I did create LANDesk Date Control in the form but the date format shown MMDDYYYY.
I want change the date format to DDMMYYYY...how?
& how do I link the LANDesk Date Control into tables as database?
p/s - can I change font color date of "Sat" & "Sun" to red color instead? Please guide.
Thanks.:D
Hi all,
i've a field that contains the systemdate n time
i.e
txtDate.value = Now
will give me this 11/30/1899 9:46:00 AM.
How do i get rid of the second hands??
i want 11/30/1899 9:46 AM instead.
Thank you
Hi All
I have a database table with a long date format 05/08/1995
I am trying to think of a way to alter the data in a query so it shows 08/1995. without comprimising the field that says 05/08/1995.
any ideas? I can add a new field but not sure
I wish to insert in a table, not the date, but just the month and year (yy/mm or mm/yy), for example 05/10 or 10/05 for October 2005 (the order of yy and mm does not matter). In addition, I need to be able to sort the records chronologically using the same field.
I have tried various solutions with the date/time field or the number field (e.g. using yy.mm where the mm are the decimals). However, it does not seem to work correctly. Any suggestions for how I can do this by configuring the format, inputs mask and validation rule?
Niels
Hi
I'm very new to Access, so please be gentle;)
I have imported a appointment database that I need to analyse, however the Date & Time data within the table has been written as;
Date: 20051220 - which I would like to read dd/mm/yyyy (20/12/2005)
Time: 800 - which I would like to read as hh:mm (08:00)
I would like to produce a report of all the queries, i.e. longest appointment, shortest etc... but display them in the correct Date/Time format.
So how should I go about this?
I cannot alter the imported table in anyway.
1. Can I produce a mirror like table of the existing table, that automatically use the correct Date/Time format?
2. Can I alter the values within a query?
3. Can I alter the final output in the Report?
What is the best way to tackle this?
Hey guys, been away from Access and SQL for some time. I have a simple 2 column table with one thats set to Date/Time that displays the date only. Unfortunaly, when I run my query, the date comes out 7/9/2005 and I want it to come out as 7/09/2005. I know I am going to have to force it out with a format command, but its been so long that I have no idea how to. Right now my query, in SQL format, looks like this.
SELECT * FROM Table1 ORDER BY Date DESC
I just need the format command to force the date. If anyone can help, thx.
Hi,
I need to calculate the number of days between two days however the format on which i have my date includes the time in the same field -
2007-02-20 07:15:30.474
When I calculate one date minus an other the result is #error
I require the result to be in a count format e.g 2.3 days (like in excel)
Is there anyway to get around this without splitting the date and time?
Please help!:)
Hi everyone
I have 2 date fields date1 and date2 , and i have date/time data type but what i want to be inputed is in dd/mm/yyyy and not mm/dd/yyyy, what do i need to do in accees both date fields properties to make sure it is in UK date format. thanx
I have played with the format and input mask but i am lost dont know what to do.
Thanx
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName
FROM Staff INNER JOIN myTable ON
Staff.ID = myTable.StaffID
WHERE myTable.myDate >= #3/2/2014#
AND myTable.myDate <= #3/3/2014#
AND myTable.myTime >= #8:00PM#
AND myTable.myTime <= #11:00PM#
ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I use expression on the query field, but after I run it, the field change its format from number to text, how to reformat on the query criteria to change the text to integer format?
View 8 Replies View RelatedI'm having a format problem. I have a query (Q1) that, among other things format a date field as YYYYMM (Field1).
I have a second query (Q2) whose data source is Q1.
In Q2 I need to link Q1 to a table but Field1 is being reformatted as text (confirmed by running a make table query).
I want Field1 to be Number format to eliminate a mismatch error.
I know how to change the format of a field in a table using VBA but I cant seem to find a way of changing the format within a query.
Hi all,
I have an inherited database with years worth of julian dates stored as numbers (e.g. days 1-366 for a leap year). I also have some fields stored as short dates. I would like to run a series of parameterized queries on this data, some using the short data and some using the "julian dates" that are actually just numbers. I have the user enter the start and end date in short date format and would like that to be converted and held in an unbound field as a number value. So far I can get the date to appear as a "julian date" (e.g. 1/1/08 appears as 1, obviously the underlying data is still 1/1/08) How do I take that 1 and convert it to number value "1"? Thanks in advance.
Cheers,
Peter
I am working on a report in Access2000 which is getting information from several tables via a number of queries.
I am using nested IIf() functions to combine text formatted data in a calculated query field before using it in a report.
One such IIf() function is
Desc_col: IIf([HOVR - UDP].[SERVICE] Is Not Null,[DA] & " " & [SEQ] & " " & [TYPE] & [MO] & " " & [SUB] & " - " & [HOVR - UDP].[SERVICE],
IIf([MinOfCCT] Is Not Null,"I/O DIST CAB " & [UDP - JC CIRCUITS-05-F].[PWR] & " - CCTS " & [MinOfCCT] & " thru " & [MaxOfCCT],IIf([DESCRIPTIO] Is Not Null,[DESCRIPTIO],"Spare")))
When I have tried to do the same thing with date fields it does not work. The function is fine as long as it is not nested.
That is
Rev_col: IIf([Rev_HOVR] Is Not Null,[Rev_HOVR],"")
and
Rev_col: IIf([Rev_Elec_equip] Is Not Null,[Rev_Elec_equip],"")
both work.
But when I combine them into a nested function
Rev_col: IIf([Rev_HOVR] Is Not Null,[Rev_HOVR],IIf([Rev_Elec_equip] Is Not Null,[Rev_Elec_equip],""))
I get an error message "! Data type mismatch in criterial expression"
There is no data mismatch in the original tables from which the information was extracted. The dates are all in DATE/TIME and set to "General"format in the tables.
I am wondering if I will have to use Visual Basic function to combine these fields. However that poses a problem. When I've looked at this I find that runtime VB is no longer available in Access and I do not want to go out and buy it on the offchance that it will work.
Can anyone tell me if there is another solution to my problem?
I have set a field on my FORM with the General Date format. Every time I use the date picker it inserts the correct date with a time of 00:00? I even changed the format on my table to general date - still no luck.
View 4 Replies View RelatedI need to alter filed 24-gen-64, in 24/01/64... how to?
View 5 Replies View RelatedI have a form and I want the dates to be displayed based on predefined time. In this case, I want my form to show present date from present day's 7:00 AM to next day 7:00 AM.
View 7 Replies View RelatedI want to be able to display the result of a difference between Date/Time values in "HH.MM" format (i.e. yes I want the result in decimals and I don't want Access to round up or down just because it feels like doing it!). I have used the following:
Example 1:
Dim ActualManHours as Long
ActualManHours = (txtEndTime.Value - txtStartTime.Value) * 86400
txtActualManHours.Value = ActualManHours
Example 2:
Dim ActualManHours as Long
ActualManHours = DateDiff("h",txtStartTime.Value, txtEndTime.Value) & "." & Format(DateDiff("n",txtStartTime.value,txtEndTime. value) Mod 60, "00")
Example 3:
Dim StartTime as Double
Dim EndTime as Double
Dim ActualManHours as Long
StartTime = CDbl(txtStartTime.Value)
EndTime = CDbl(txtEndTime.Value)
ActualManHours = EndTime - StartTime
txtActualManHours.Value = ActualManHours
I have a series of fairly large csv files which I need to consolidate by importing them to a single Access database. There are of the order of 50-60,000 'lines' per csv and about a dozen different files (all comma de-limited and text-qualified with inverted commas).The problem I have is, there are several date fields within the csv which are not formatted to Access' liking. Namely <Mmm_dd_yyyy_hh:ssAM> with underscores used here to represent spaces.
So for example, today's date appears thus :
Feb 6 2013 12:00AM (i.e. two spaces between 'Feb' and '6')
And this day next week would appear thus :
Feb 13 2013 12:00AM (i.e. one space between 'Feb' and '13')
I will obviously need this field recognised as Date/Time so I can query appropriately but I have no control over the source data and need to find a way of converting the format.One option would be to run a script on the csv's themselves prior to importing but I'm not sure how to do that.import this field as Text and then edit the contents after import (VBA?), such that the field can be redesignated with a data type of Date/Time.
I have created a table called - "Test"
The properties of the table is listed below
Table Name: Test
Field Name: ADMDAT2 (Text)
DISDAT2 (Text)
Operation Date (Date/Time)
I have written a query to populate a field where the Operation Date is between the ADMDAT2 and DISDAT2
Expr1: IIf([ADMDAT2] Is Null,"",IIf([Operation Date]>=[ADMDAT2] And [Operation Date]<=[DISDAT2],"Match"))
Unfornately it returns and ERROR message... I believe this may be because, the data type of the field, matching a Text with a Date/Time, I have rerun the query using a sample table where all the fields are Date/Time, and it work perfectly.
What i need help with how do i convert a text field into a Date/Time in a query?
So i can place that in the query before i populate the Test table. therefore it all should be date/time
thanks in advance
I have a problem converting text to a real date value so I can do some calculations. I have a query that brings in data from an external data source. It appears the data is stored in the external table in text format and looks like this:
20050902 15:40:41
I have tried CDate to convert the text to a date/time format, but no luck. Any ideas?
I have a simple and small database having only one table. I want the data table to be exported in a spreadsheet format automatically at the end of the month. Is there any code or function to do that?
View 1 Replies View RelatedI have an Access 2010 application running on Win 7 Pro which connects to a Back End SQL Server database. I am trying to get Access to synchronise the client pc system date & time with the Sql server date and time. Please note, the date/time does not necessarily have to be correct, it just has to be consistent between the server and all the pcs running the Access application.
I have tried two methods as follows. But both only work if Access with Administrator privileges, which isn't really practical.
Method 1:
Code:
Dim MyDateTime As Date
'Some Code here to get MyDateTime
If MsgBox("Change date & time to:" & vbCrLf & vbCrLf & MyDateTime & "?", vbYesNo, "Change") = vbYes Then
Date = DateValue(MyDateTime)
Time = TimeValue(MyDateTime)
End If
Method 2:
Code:
Private Type SYSTEMTIME
wYear As Integer
wMonth As Integer
wDayOfWeek As Integer
wDay As Integer
[Code] .....