I am trying to run a query which will effectively group up the "Name" field and combine the "colour" field against the name using a ";". so it would look like this:
I need to clean up data from text file which is huge.
I wonder if Access Expression Builder can mirroring "IF function" from Excel Here is what i am trying to do The data consist of multiple customer and multiple date. But the layout only specified customer ID once eg.
CustID: aaaa Date 01012013 02012013 03012013 CustID: bbbb 01012013 02012013
When exported the file I used Fixed Width command to separate Date Column and Cust ID column.
Below is the result that I am looking for CustID: aaaa : aaaa Date : aaaa 01012013 : aaaa 02012013 : aaaa 03012013 : aaaa CustID: bbbb : bbbb 01012013 : bbbb 02012013 : bbbb
1. Column A is Date
2. Column B is Customer ID
because Customer ID in column B only appear once, I need to create another column to populate that Customer ID whenever the transaction related with that Customer
3. Column C is the column where i tried to populate Customer ID to each date related to that Customer.
If I worked in excel the formula will be --> IF(AND(C5="",B6=""),"",IF(AND(C5="",B6<>""),B6,IF( B6<>"",B6,C5)))but in access i am stucked.
I have to three fields in my query wizard, lets call them A and B and C. The condition for the query is either A or B is Null and C is Null. Im not sure how to do this though becuase A, B and C are different fields. I wrote
Code: Is Null
.
under the criteria of A and B and C, but this specifies that A,b and C is Null, how can I make it so that C must be Null and either A or B or Both.
I am working on a report that has some special characteristics.
Let's say I have a list of groups of Vendors in a table, complete with VendorID. I have 3 other tables that use the VendorID: Complaints, Complements, and Terminations.
Each of these tables has a date that the Complaint, Complement, and Termination notice was received.
Every Fiscal Quarter, a report is pulled that looks back over the 4 preceding quarters to determine if a 5% threshold has been crossed by any of the vendor-groups in regards to the amount of Complaints they received.
The equation used for that is : (complaints/vendors_in_group)*100
It is imperative that the information has the current fiscal year and fiscal month (which I am tracking with functions from MS website), and I need to be able to store the information attached to the fiscal year and month.So when a user goes to the form and inputs the desired Fiscal Year and Fiscal Month, the database can display the 4 previous quarters of information...split into Q1, Q2, Q3, and Q4.
What I would like to have happen is to be able to have one table where the information is stored, quarterly, so that it can be retrieved for the report.
Questions: 1. Is it possible to have one line, per VendorID, that has the total number of Complements, Complaints, and Terminations, as well as the threshold percent stored in a table? Right now, I am getting LOTS of duplicates and blank lines when I try to put them all together. It has the right data, but takes about 10 rows per VendorID.
2. It is very important that the total number of Vendors in a group be captured on that quarterly report, so maintaining that number, in the same table, is essential and must be tied to the VendorID.
3. I have looked at Union Queries and Crosstabs, but I just dont know enough about them to make it work.
I want an example of choose function to write in expression builder in access 2007 ..
I have a size as 1/4,2/3,4/9 etc to be converted to ABC,DEF,GHI etc . i have nearly 40 entries so i think choose statement would do it .. moreover i cant find switch statement in expression builder .......
For example one could be to replace the text ..... or any other method to change the size to alphabetical grade.
I have two queries, one base upon the other. I would like to combine them (If Possible) into one query so I can embed them into a form or report. I have tried without success at finding the answer on the forum as well as searching the web.
The table lists employee numbers and dates they worked. I need a count of how many employees worked each year, based upon the paycheck date, not the actual date worked. Pay check dates are two weeks apart. An extreme example, is the first pay check date of 2010 was on 1/1/2010, but all the days worked were in 2009, this would have to be included in 2010 not 2009(See the query for further date calculation understanding). Anyway, the date calculations are not the issue here.
I only have one table, so if I am not mistaken, I can't use the WHERE (SELECT... JOIN) feature. I also was unsuccessful at using SQL DISTINCT.
I am running ACCESS 2010 Tables are ACCESS 2007.
OS is Windows 7 Ultimate.
I have included a same database with the queries. qryEmployeesAnually2 is the results I am trying to achieve.
Is it possible to append two queries? The queries have the same layout and labels...it's just a matter of combining the data into one datasheet view.
The two queries are below:
1) SELECT prc.Market AS Geography, trp.Product, trp.Indication, trp.[Variable Name], trp.Period, Round(prc.Index*trp.[Variable Value],2) AS [Variable Value], trp.Outlet, trp.Daypart, trp.[Program Name], trp.Len, trp.Creative, trp.Campaign, trp.[Campaign Name], trp.[Media Type], trp.Vendor, trp.Channel FROM tblTRP AS trp, tblTRPpercent AS prc WHERE (((trp.Indication)=prc.Indication) And ((trp.[Media Type])=prc.Type) And ((trp.Geography)="National") And ((trp.Month)=prc.Month));
2) SELECT prct.DMA AS Geography, tv.Product, tv.Indication, tv.[Variable Name], tv.Period, Round(prct.percentUniverse*tv.[Variable Value],6) AS [Variable Value], tv.Outlet, tv.Daypart, tv.[Program Name], tv.Len, tv.Creative, tv.Campaign, tv.[Campaign Name], tv.[Media Type], tv.Vendor, tv.Channel FROM tblTVOtherMetrics AS tv, tblDMApercent AS prct WHERE (((tv.Geography)="National"));
I need to combine data from a Yes/No field such that for any instance of a Yes/True the query will show Yes (checked). Only if there are no instances of Yes should the query return No (unchecked) for the field. In addition, this rule must apply for each individual account number in a [separate] table of accounts.
The following query works fine except that it returns two entries for John Doe if his account has entries for both FlagSpecialOrder=True and FlagSpecialOrder=False. You can see in the attached image that accounts 8 and 9 both have two entries each. Because these customers have a special order I want just one one row for each showing Yes (checked).
I want the query to return a single row for each unredeemed account. If there are no special orders then that field will be No (unchecked), but if there is at least one instance of a special order the field show be Yes (checked).
(To put this into some kind of context, customers can place orders which may be stock items or special orders, in which case I need to record the supplier, quotes, delivery dates, etc. In some cases they save for an item and there may or may not be a special order involved. Once the order is fulfilled it is redeemed.)
SELECT DISTINCT Customers.Name, SavingsClub.AccountNumber, SavingsClubReservations.FlagSpecialOrder, Suppliers.ShortName, SavingsClub.FlagAccountClosed, SavingsClub.FlagDelete FROM Suppliers INNER JOIN (OrderDetails INNER JOIN (((Customers INNER JOIN SavingsClub ON Customers.Index = SavingsClub.CustomerID) INNER JOIN SavingsClubAccounts ON SavingsClub.AccountNumber = SavingsClubAccounts.Account) INNER JOIN SavingsClubReservations ON SavingsClubAccounts.Reservation = SavingsClubReservations.Reservation) ON OrderDetails.Index = SavingsClubReservations.OrderID) ON Suppliers.Index = OrderDetails.Supplier WHERE (SavingsClubAccounts.Redeemed=False) ORDER BY Customers.Name
I've spent a week trying to solve this and thought I was on the right tack with the following query, which does return a single instance of each relevant account, but I can't manage to combine it into the query above to obtain the complete query.
SELECT DISTINCT SavingsClubAccounts.Account FROM SavingsClubAccounts INNER JOIN SavingsClubReservations ON SavingsClubAccounts.Reservation = SavingsClubReservations.Reservation WHERE (SavingsClubReservations.FlagSpecialOrder=False) And (SavingsClubAccounts.Redeemed=False) And SavingsClubAccounts.Account Not IN (SELECT SavingsClubAccounts.Account FROM SavingsClubAccounts INNER JOIN SavingsClubReservations ON SavingsClubAccounts.Reservation = SavingsClubReservations.Reservation WHERE (SavingsClubReservations.FlagSpecialOrder=True) And (SavingsClubAccounts.Redeemed=False)) UNION (SELECT SavingsClubAccounts.Account FROM SavingsClubAccounts INNER JOIN SavingsClubReservations ON SavingsClubAccounts.Reservation = SavingsClubReservations.Reservation WHERE (SavingsClubReservations.FlagSpecialOrder=True) And (SavingsClubAccounts.Redeemed=False));
Appreciative of any help, otherwise I think I'll end up manipilating the data in code and use a temp table, etc...
I have 2 queries serving useful routines, one to filter out duplicate addresses for a mailing label routine, the second to convert tick boxes into Y/N answers for a Tab Delimited Text file export.can I combine the 2 SQL statements in the 2nd query without amending them in any way.
The SQL statements are;
FROM [Mail List] AS a GROUP BY a.[Member ID], a.[Address 1], a.[Member Name], a.[Address 2], a.Town, a.PostCode, a.[e-News List], a.[e-Mail List], CStr([a].[Member ID])+[a].[Address 1] HAVING (((a.[e-News List])=False) AND ((CStr([a].[Member ID])+[a].[Address 1])=(Select cStr(Min(b.[Member ID])) + b.[Address 1] From [Mail List] as b Where b.[Address 1] = a.[Address 1] Group By [Address 1])));
I know how to concatenate fields in a query but have not done it with memos before. I have three memo fields and I want each to show up in one field with a bullet in front of each. Memo1 may be empty and memo2 and memo3 may have something or memo 3 may have some text but the others are empty so I need to be able to list the memos without the empty spaces. Is a query the best place to do this or in the report and how do I do it?
I have an invoice form that is from tblInvoice, and on that form i have 5 subforms all tied to 5 tables, tblRepair1, tblRepairs2, etc. When we get service done at a shop the user can enter up to 5 repair types, which all five tblRepairs are joined to the InvoiceID of the tblInvoice.
the issues is one user might put oil change in repair 1 and tire rotation in repair 2 and the other 3 repairs not used. another user may use all 5 repairs and put oil change in the repair 5 field. What i want to do is query a repair type, Oil change, and get every InvoiceID record that has oil change in it regardless of what repair table it was stored in, or in other words regardless of if it was entered in repair1 or repair5.
i have tried to "step down" the criteria referencing the cbx on the search form but if queries blank. I only want the records that have an oil change in them but still want to see all the repairs that were done with it.
I have created a booking system for a travel agency and now when the booking is complete I want to export some summary data to the Excel. The issue is that I have separate tables showing lunch, tickets, tour guides, etc for every destination and I have also created queries showing the total for each destination but the issue is that I cannot combine all the results into one query and export that query to excel.
Im trying to join two queries as I am unable to use just a single query but I cant use a union query as the query fields aren't exactly the same.
Both queries have a PO_Detail field as every PO has a PO_Detail number assigned to it. 3 of the same records are in both query results but one query is missing the other two results.
If I create a join between the two queries based on this field I don't get all the results. Unfortunately I cant upload the database as it has sensitive data which would take me ages to clear out but I can show a picture of the results.
Sales will make calls and record data using a form (frmEnquirySpeak) which will save to tblSpeak. If the call results in a meeting being booked then it also updates tblMeeting with a date of the meeting (simple stuff so far!).
A sales person might record up to 14 types of action per day, qrySpeakPerAction counts the different types of call made on a day by day basis for reporting. qrySpeakGroupedAction summarises this down to 8 categories and applies a date filter selected on a reporting form (and this works well).
I now want to include the qryMeetingsBookedPerDay (counts m_date_raised and groups by m_date_raised...eg 2 on 24/12/14, 4 on 28/12/14 etc etc) with the qrySpeakGroupedAction...
My effort so far has resulted in only dates which appear on BOTH queries showing. This may not always be the case. Every day calls will be made, this may or may not result in a meeting. So I see there being 2 options:
1 - Query to show the count of calls on a date or date range and number of meetings booked each day that calls are made (prefer this method, it sounds simpler) 2 - qryMeetingsBookedPerDay should auto populate days which dont appear as 0 (this sounds messy and not sure what capabilities/speed are like when managers want to spot patterns/trends over multiple years?)
I am having a conversion problem combing the following 2 string expressions.
Condition 1: Format([TestDate],'mmm dd", "yyyy')
Condition 2: NZ([TestDate],"No Exam Found")
I want to convert the dates to string values, and evaluate for Null fields, if Null display "No Exam Found."
I am having trouble getting both of these string expressions to work together. If I use them together the NZ statement fails.
I can get the date value in the column to display as a string "Feb 14, 2004" or If I use the 2nd condition if a field is Null display "No Exam Found", separately.
But how to do I get these two conditions to work together on the same column of information?
I am comfortable with Access, and basic Queries, but I am a non-programmer. I am tipping my toe in the Access programming water with Michael Alexander's book "Microsoft Access Data Analysis: Unleashing the Analytical Power..." and his Web tutorials... which has given me enough confidence to tackle this.
I have searched the web and have been toiling over this for about 2 weeks now.
I have a database with all the hours employees have logged stored in the database. Our payroll company wants an excel spreadsheet that has very specific info in particular columns and fields on the excel spreadsheet, so I'm trying to design a query which will put the correct info in the correct fields per their system.
The challenge is, I have currently a query with Employee ID, Overtime Hours, and Regular Hours as separate columns.
I need to translate this to a query with a single column for hours and a separate column that designates those hours as OT or Reg, with two rows for those employees who have both types.
I don't know how to create a query or a formula in a query to break out each employee row into multiple rows with different data in the hours column. It seems like there's something pretty straightforward that I've done in a similar vein but it doesn't seem to work - I can do the opposite and combine those hours by using the SUM function in a query, but I can't seem to break it out this way.
I have a form (DropDown form) that has 3 drop down fields, you select your values from the drop downs and you would push a command button that runs an event procedure which runs a query (DropDown qry test). The user should have the option of picking any combination of fields to filter by. Or no combination, which would return all values in all fields. So I am basically using the form as parameter's for the query.
The problem I'm having is that my query is returning values for one field AND values for another field. Even if the other values selected are not in the same record. It's not combining the fields together to filter. For example: you pick a Project name and Supplier name, the query will return records that have the project name you selected but it will also return records with the supplier name you selected that have a different project name.
I've attached screen shots of the form and the design view of the query (the screen shot cut off the last column name. It is meant to say "Expr3: [Forms]![DropDown form]![Combo7]").
Using Windows 7, Access 2010
Is there a way to select multiple values from the drop downs?
I'm facing an issue when I'm creating a Data Macro After Insert in Access 2010. In the value for the SetField, I use the expression builder. I wanted to use the DateAdd function but it not showing, also I cannot see my user define function (Module).
This behaviour seem to occur only in the instance of Expression Builder while in the Data Macro, everything is fine anywhere else including macro.
Hi, I need some help using functions in queries. I can calculate simple arithmetic in calculated fields, but fail when using functions. For example I have attached a doc file showing a query. One table displays record ids, the other four have data for consecutive dates for each record. I cannot make the query calculate the standard deviation of the data for each record. What expression would I use, I know it is stdevp but when i try and create the expression i get error messages galore.
I have query that filters my list in Access. The list can be filtered in different ways(like using a combobox). This is the criteria of the query for the field Title of the table Book:
Code: Like IIf([Forms]![frmName]![cmbSearch].[OnClick];"*" & [Forms]![frmName]![txtSearchBar] & "*"; [Book]![Title])
What I want is when the cmbSearch is clicked, the list must show the Tiltes where the title of the book contains the words of the search bar. When its not clicked on that button, the list must show all the titles.
Here is the SQL of the query:
Code: SELECT Book.ID, Book.Title FROM Book WHERE (((Book.Title) Like IIf([Forms]![frmName]![cmbSearch].[OnClick],"*" & [Forms]![frmName]![txtSearchBar] & "*", [Book]![Title]))
The problem is the list filters whether I click on a different cmdButton or an optionButton. I dont know why [cmbSearch].[OnClick] doesnt work.
I know how to do this in VB.NET ... I have a form with a combo box. I would like to create an "on change" event where it updates the text boxes on that same form depending on what's been selected in the combo box.
I don't know how to change the combo box's selected index so it defaults to the first item so there's no blanks/errors in my form.
So when the combobox contents is changed, I'd like a routine that updates all the text boxes kind of like this:
sub update() TextBox = "SELECT * FROM Table_Name WHERE ID =" & Combobox.text end sub
I having a problem with the expression builder in a table.I got a lot of fields with dates and I what a calculated field so I can see if any of the dates are newer than 7 days.I have been trying this formula:
and I have several queres using the same table. I was trying to add 2 columns and fields to my 1 querie. I do not use program much but I have it for my cattle. SO I was clicking around. Went to Table and went to add the field.I changed my Primary Key field then realized I should not have done that.I changed it back to "ID" and "Number" and added my fields. THEN I went to the one querie and added my columns and fields.However NOW the one querie I messed with has 30,888 rows as it just repeats the 20 or so rows over and over .The other queries do not and they use some of the same data "ROWS" from the table
I have been successfully using the following statement in Access 2010 to retrieve data from a large csv relational database:
SELECT [1995_1].RPT_REC_NUM, [1995_1].PRVDR_NUM, [1995_2].WKSHT_CD, [1995_2].LINE_NUM, [1995_2].CLMN_NUM, [1995_2].ITM_VAL_NUM FROM 1995_1 INNER JOIN 1995_2 ON [1995_1].RPT_REC_NUM = [1995_2].RPT_REC_NUM GROUP BY [1995_1].RPT_REC_NUM, [1995_1].PRVDR_NUM, [1995_2].WKSHT_CD, [1995_2].LINE_NUM, [1995_2].CLMN_NUM, [1995_2].ITM_VAL_NUM HAVING ((([1995_2].WKSHT_CD)="A000000") AND (Not ([1995_2].LINE_NUM)="09500") AND (([1995_2].CLMN_NUM)="0100" Or ([1995_2].CLMN_NUM)="0200")) ORDER BY [1995_1].RPT_REC_NUM, [1995_2].LINE_NUM;
This query returns one long column of line numbers (LINE_NUM) representing the itemized salary (CLMN 0100) and non-salary expenses (CLMN 0200) and a total for each of the organizations represented in the data base. My question is: is it possible to modify the query so that it returns only organizations whose data passes that following test that checks to see if the itemized line numbers 00100 to 10099 equal the total for each organizations line 10100: SUM(LINE_NUM 00100:10099)=SUM(LINE_NUM 10100:10100).
I have tried several times to upload a sample file but have been prevented from doing so because of a missing security token. I have communicated this to the administrator.
I don't want my user to type in the parameter value for a query in case of miss spelling. Therefore, I'm using a dialog box form with a combo box field. The row source of the combo field is a table with one field for the list. I've added VB code (Event Procedure) to a buttons on the dialog box which says to run a query after click. I've created the query for the info I need displayed and am using the forms combo field as the criteria.
Private Sub cmdOK_Click() DoCmd.OpenQuery "qryRequestsbyBranch", acViewNormal, acEdit DoCmd.Close acForm, "frmDepartmentList" End Sub