How can I add the resulting records from a union query. The results of the union are something like this:
Quantity Item
2 Cats
3 Cats
1 Dog
4 Mice
What I need to display is
Quantity Item
5 Cats
1 Dog
4 Mice
How can I get the query to "do the math"?
Im trying to join two queries as I am unable to use just a single query but I cant use a union query as the query fields aren't exactly the same.
Both queries have a PO_Detail field as every PO has a PO_Detail number assigned to it. 3 of the same records are in both query results but one query is missing the other two results.
If I create a join between the two queries based on this field I don't get all the results. Unfortunately I cant upload the database as it has sensitive data which would take me ages to clear out but I can show a picture of the results.
Wondering whether it is possible to use the 'Make Table' function in conjunction with a union query. My early attempts have failed and I am relatively new to Access.
I am using Access 2010.
I have a database that has over 20 tables in it and am using Access 2000. Unfortunately I cannot change the structure as it performs specific functions, so I am stuck with it.
I have created a Union Query from these tables yaking data from 5 fields using the Serial Number entered by the user.
SELECT[Workstation].UnitPart,PropertyTag,UnitSerial,Date,Technician
FROM[Workstation]
WHERE((([Workstation].UnitSerial)=[Enter Serial No.];
UNION
SELECT[LAPTOP].UnitPart,PropertyTag,UnitSerial,Date,Technician
[Code] ....
I use a bar code scanner to scan the serial number, and it goes through the tables and returns the results along with the other specified fields.
I would like to scan up to 16 or more different serial numbers and have it return the results. Perhaps scan the first 16 serial numbers, then run the query? Is that possible. The serial numbers are unique and will return a combination of laptops, printers, monitors, etc...
I have created a report from the above union query and it works perfectly with only one serial number entered.
I am using the following UNION QUERY to total up equipment tested for a report.
SELECT "Laptops Tested" AS PCEQUIP, Count(*) AS RECORDS
FROM [LAPTOPS]
WHERE (((Date)Between [Enter Start Date] AND [Enter End Date]));
UNION
SELECT "Workstations Tested" AS PCEQUIP, Count(*) AS RECORDS
FROM [WORKSTATION]
[code]...
I have created a report using ACCESS 2000 for this union query and it satisfies the requirement. I am trying to add the proper code and syntax in this query to total the number of all of this equipment tested.In this case the total would be 86. Is this possible?
I'm having a problem with a UNION / UNION ALL query.It seems there is a application crash fault when running the query that MS are aware of and have issued a hot fix. Unfortunately it will take my IT dept some time to check and install the hot fix If they agree to do it at all.
Problem signature:
Problem Event Name: APPCRASH
Application Name: MSACCESS.EXE
Application Version: 12.0.6606.1000
[code]...
I am having difficulty getting a query to work, there's probably something really simple I'm missing. . . I can get the Union function to work but I can't get it to create a table for me. The basic query looks like this:
INSERT INTO test
SELECT * FROM [Design] WHERE (Design.CID Not Like "*-*")
UNION
SELECT * FROM [Release] WHERE (Release.CID Not Like "*-*")
It works fine and shows me the table I want without the first line, but I would like it to input into a new or existing table. Any help would be greatly appreciated!
Can I use left and right outer join at a time? Means I want all records from both the table, and it should put 'null' whenever value is absent.
View 1 Replies View Related(Example of my data)
Order ID Customer ID Purchase Amount
1 17 $14.95
1 17 $7.35
2 21 $11.90
3 27 $64.80
3 27 $31.13
I have two tables with pull in data. What I'm looking for is a query that would combine the customers purchase and sum the purchase amount field. The tables are unioned as some customer data is in one table but not the other and joining them excludes some of this data. Ultimately I would like to see is
Order ID Customer ID Purchase Amount
1 17 $22.30
2 21 $11.90
3 27 $95.93
I have two tables, and I made a union query (tbl1 UNION ALL SELECT ...tbl2). Problem is, I have two entries that are identical in both tbl1 and tbl2, but I want to include BOTH of them in the union query. Even though I used the ALL operator, only one set shows up!! I'm pulling out my hair trying to figure this out. Please help, and thanks so much in advance!:(
View 2 Replies View RelatedThe code pasted below creates a union query for a set of tables (J000171, J000174, J000178 etc) and stores the results of the query in a table called temp.
The first piece of code queries the ‘status’ field of a table rjobs for those records with a ‘status’ field of “Live”. Another field within this rjobs table, ‘JobID’, happens to be the name of a table where additional information relating to that job record is held eg. J000178 All of the tables selected in the query on rjobs are then included in the union query.
The second piece of code stores this information in a table called temp
I would like to be able to do 2 things with this;
1.add an additional field to the union query which holds the JobID field value from rjobs (or alternatively the table name from which the data originates eg J000178 etc as that is the same as the JobID file din rjobs)
2.create an option to clear the info in the temp table. Currently additional info is appended, so whenever the query is refreshed new data is simply added to old data. I would like to be able to clear that data where possible.
The union query is run from the on click of a command button on a simple form. Perhaps an additional button could be used to clear the records from the table temp.
Any ideas greatly appreciated.
Here is the existing code …
Option Compare Database
Option Explicit
Private Sub Command0_Click()
Dim db As Database
Dim rsRjobs As Recordset
Dim rsRapps As Recordset
Dim LengthofUnionSQL As Long
Dim sql As String
Dim UnionSQL As String
Set db = CurrentDb
Set rsRjobs = db.OpenRecordset("Select * from rjobs where Status = 'Live'", dbOpenSnapshot)
Do While Not rsRjobs.EOF
UnionSQL = UnionSQL & "Select ObjectID, SearchNo, DateSearched, Consultant, from " & rsRjobs!jobID & " Union "
rsRjobs.MoveNext
Loop
'following two lines are to remove the trailing word Union from the string unionsql
LengthofUnionSQL = Len(UnionSQL)
UnionSQL = Mid(UnionSQL, 1, LengthofUnionSQL - 7)
' Now variable Unionsql will hold the value something like
' Select ObjectID, SearchNo, DateSearched, Consultant from J000145
' Union Select ObjectID, SearchNo, DateSearched, Consultant from J000146
' Union Select ObjectID, SearchNo, DateSearched, Consultant from J000147
MsgBox UnionSQL
Set db = CurrentDb
Dim rsUnionquery As Recordset
Dim rstemp As Recordset
Set rstemp = db.OpenRecordset("temp", dbOpenDynaset, dbSeeChanges)
Set rsUnionquery = db.OpenRecordset(UnionSQL)
Do While Not rsUnionquery.EOF
rstemp.AddNew
rstemp!ObjectID = rsUnionquery!ObjectID
rstemp!SearchNo = rsUnionquery!SearchNo
rstemp!DateSearched = rsUnionquery!DateSearched
rstemp!Consultant = rsUnionquery!Consultant
rstemp!jobID = rsUnionquery!jobID
rstemp.Update
rsUnionquery.MoveNext
Loop
End Sub
After putting in fields there were checkboxes into a Union Query, they now show up as -1s and 0s. Is a -1 a blank, and a 0 checked?
View 1 Replies View RelatedI'm having a small problem where Access returns a "Query too complex" error when I try to run a Union query of the form:
Code:
SELECT CourseNumber, CourseTitle, [Date], TotalScore, "Two (2) zero visibility dives?" AS [Question], CountZeroVisibility AS [NegativeResponses]
FROM qryScore
UNION ALL
SELECT CourseNumber, CourseTitle, [Date], TotalScore, "One (1) night dive?" AS [Question], CountNightDive AS [NegativeResponses]
FROM qryScore
UNION ALL
...etc
With more than 13 unions.
I have 2 queries serving useful routines, one to filter out duplicate addresses for a mailing label routine, the second to convert tick boxes into Y/N answers for a Tab Delimited Text file export.can I combine the 2 SQL statements in the 2nd query without amending them in any way.
The SQL statements are;
FROM [Mail List] AS a
GROUP BY a.[Member ID], a.[Address 1], a.[Member Name], a.[Address 2], a.Town, a.PostCode, a.[e-News List], a.[e-Mail List], CStr([a].[Member ID])+[a].[Address 1]
HAVING (((a.[e-News List])=False) AND ((CStr([a].[Member ID])+[a].[Address 1])=(Select cStr(Min(b.[Member ID])) + b.[Address 1]
From [Mail List] as b
Where b.[Address 1] = a.[Address 1]
Group By [Address 1])));
[code]...
I have two basic lists of employee names, ID's, phone numbers etc, with one field containing an attachment with a picture of their ID. I don't want to permanently combine these two lists of employees, as they work in different departments, but for certain events I need to be able to print a report with a list of all their names, ID numbers, and corresponding ID photos.
I tried to make a UNION query, but can't do it with the attachment field. If I leave that field out, it's no problem. To simplify, I have been doing a test run as follows, with just the name field and photo field (field 1).
SELECT [Starting Gate employees].[Employee name], [Starting Gate employees].Field2
FROM [Starting Gate employees]
UNION
SELECT [Farrier employees].[Employee name], [Farrier employees].Field2
FROM [Farrier employees];
I know how to concatenate fields in a query but have not done it with memos before. I have three memo fields and I want each to show up in one field with a bullet in front of each. Memo1 may be empty and memo2 and memo3 may have something or memo 3 may have some text but the others are empty so I need to be able to list the memos without the empty spaces. Is a query the best place to do this or in the report and how do I do it?
View 4 Replies View RelatedI have a Union Query which the result was like this:
Date Cash_In Cash_Out
08/06/2013 100.00
08/06/2013 25.00
08/06/2013 50.00
08/06/2013 20.00
Note: The Date Field comes from two different tables. Original field names are Cash_In_Date and Cash_Out_Date.
I have an invoice form that is from tblInvoice, and on that form i have 5 subforms all tied to 5 tables, tblRepair1, tblRepairs2, etc. When we get service done at a shop the user can enter up to 5 repair types, which all five tblRepairs are joined to the InvoiceID of the tblInvoice.
the issues is one user might put oil change in repair 1 and tire rotation in repair 2 and the other 3 repairs not used. another user may use all 5 repairs and put oil change in the repair 5 field. What i want to do is query a repair type, Oil change, and get every InvoiceID record that has oil change in it regardless of what repair table it was stored in, or in other words regardless of if it was entered in repair1 or repair5.
i have tried to "step down" the criteria referencing the cbx on the search form but if queries blank. I only want the records that have an oil change in them but still want to see all the repairs that were done with it.
I have created a booking system for a travel agency and now when the booking is complete I want to export some summary data to the Excel. The issue is that I have separate tables showing lunch, tickets, tour guides, etc for every destination and I have also created queries showing the total for each destination but the issue is that I cannot combine all the results into one query and export that query to excel.
View 4 Replies View RelatedI have three queries that make a training list based on a person's role, team, and ad-hoc exceptions. The personnelID field is filtered by a listbox on a form. Each of these work great on their own (nice!). Now I want to combine them. I made the below union query that works... however when it is run, I am prompted to enter the personnelID again. This prompt only happens once. Do I need to incorporate a qhere statement somewhere, even though each of the individual queries have them already?
SELECT First_Name, Last_Name, TrainingTitle, PersonnelID
FROM qryPersonnelTrainingByRole
UNION ALL
SELECT First_Name, Last_Name, TrainingTitle, PersonnelID
FROM qryPersonnelTrainingByTeam
UNION ALL SELECT First_Name, Last_Name, TrainingTitle, PersonnelID
FROM qryPersonnelTrainingByAdHocPersonnel;
The where statement of potential use:
Code:
WHERE (((tblPersonnel.PersonnelID)=[Forms]![frmMain]![lbxPersonnel]));
Am trying many times in UNION query but its not working because there is different field names and only some fields are matched. So I need to both query's are combine in 1 query.
They Quays details:
1.Customer Credit Transaction1
2.Customer Credit Transaction2
Above both queries are already combined in UNION query as (Customer Credit Transaction Final) its not a problem.So now I need to do combine the above Union query Customer Credit Transaction Final & ReceiptformQry.
The both query details:
Customer Credit Transaction Final
SELECT BillBook1.TID, BillBook1.BILLNo, BillBook1.BILLDate, BillBook1.Customer, BillBook1.BillMode, [BillBook1 Vat Details].[TOTAL Rs] AS [CC Amount]
FROM BillBook1 INNER JOIN [BillBook1 Vat Details] ON BillBook1.TID = [BillBook1 Vat Details].TID
WHERE (((BillBook1.BillMode)="Credit"));
UNION ALL
[code]...
Above fields are need to merge in Union query or otherwise. and remaining fields are needed to show separately.
Hello all,
I realise this issue is a common one and it is usually down to simple typos (I've looked at several similar posts) but none of the advice I've seen has solved my problem. I've designed the following Union Query:
SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 1]
UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 2]
UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 3];
It should be very simple and I've checked it over and over, but when I run the query an Enter Parameter dialog appears prompting me to enter Email.
If I just click OK I get all the records but with the email field blank.
Similarly if I type x@y.com it returns all records but with the email fields all containing x@y.com
Advice would be very much appreciated!! Thank you in advance.
Abi
it's possible to use a union query as a mail merge? I haven't found anything that says I can't do it, but I'm not getting my merge to complete, and when I switch to a plain query (and not changing anything else) my merge is successful, so I'm thinking there might be a limitation.
View 14 Replies View RelatedSales will make calls and record data using a form (frmEnquirySpeak) which will save to tblSpeak. If the call results in a meeting being booked then it also updates tblMeeting with a date of the meeting (simple stuff so far!).
A sales person might record up to 14 types of action per day, qrySpeakPerAction counts the different types of call made on a day by day basis for reporting. qrySpeakGroupedAction summarises this down to 8 categories and applies a date filter selected on a reporting form (and this works well).
I now want to include the qryMeetingsBookedPerDay (counts m_date_raised and groups by m_date_raised...eg 2 on 24/12/14, 4 on 28/12/14 etc etc) with the qrySpeakGroupedAction...
My effort so far has resulted in only dates which appear on BOTH queries showing. This may not always be the case.
Every day calls will be made, this may or may not result in a meeting. So I see there being 2 options:
1 - Query to show the count of calls on a date or date range and number of meetings booked each day that calls are made (prefer this method, it sounds simpler)
2 - qryMeetingsBookedPerDay should auto populate days which dont appear as 0 (this sounds messy and not sure what capabilities/speed are like when managers want to spot patterns/trends over multiple years?)
I have 3 queries that I need to join. the 3 queries work on their own. They are all similar to below
SELECT TOP 5 ASTDATA.[ID], ASTDATA.[Weight], ASTDATA.[StockCode], ASTDATA.[CurrentQty], Rnd([ID]) AS Expr1
FROM ASTDATA
ORDER BY Rnd([ID]);
But when I join them, like below, the data doesn't change. Does the rnd function work with a union query?
SELECT TOP 5 ASTDATA.[ID], ASTDATA.[Weight], ASTDATA.[StockCode], ASTDATA.[CurrentQty], Rnd([ID]) AS Expr1
FROM ASTDATA
UNION
SELECT TOP 5 BSTDATA.[ID], BSTDATA.[Weight], BSTDATA.[StockCode], BSTDATA.[CurrentQty], Rnd([ID]) AS Expr1
FROM BSTDATA
UNION SELECT TOP 5 CSTDATA.[ID], CSTDATA.[Weight], CSTDATA.[StockCode], CSTDATA.[CurrentQty], Rnd([ID]) AS Expr1
FROM CSTDATA
UNION Query will not execute properly. Remove "WHERE" statement query runs.The WHERE statement is used to locate all duplicate records, based on serial number, in a table. Also, it excludes certain data contained in two of the four tables. There are four separate queries for four separate tables. They all work until incorporated into a UNION QUERY.
Question, is there another way to structure the "WHERE" statement for this UNION Query and achieve the same results?