Queries :: Criteria To Display Records With Values >0 In Different Fields
Sep 24, 2014
i made a query to display students results after an exam. there are 12 subjects but a student chooses 8 from that. After an exam, the results are keyed in and a result slip is printed later. The problem is that the result slip displays all subjects including those not done by the student. I typed a criteria >0 in one of the fields and no records appeared. Is there a way that i can use to display only the subjects chosen and marks attained by a student and leave out the rest?
My colleague has a multiple table database and uses lookups for some fields. The simple query was to extract 3 fields and display all records from those fields. The result of the query was that the selected fields were listed first followed by all other fields which are usually not displayed.
I would like to only display certain fields on a form depending on a criteria in another cell. For example if some enters 4 in 'Schemes' it would display 4 data entry boxes scheme1, scheme2, scheme3 etc - is it possible?
I've run into a little snag and I'm hoping to reach out for some assistance.
I've created a form that has a drop down box. This dropdown box is populated with a list of values taken from a database.
I've created a query and built an expression that filters the query records by the value of said drop down box.
My issue here is if no value is selected in the drop down box, the query produces no records. I would like the query to display all records if the user did not select a value from the drop down.
Although I'm a beginner by any stretch of the imagination, I did manage to make a conditional in VBA to apply a wildcard (*) if nothing was chosen in the drop down, but that didnt work.
I had a text box in a contacts DB form for the State field (Named txtState). It worked fine. I decided to replace it with a combo box. Now not only will it not display the existing values, but to rub salt in the wound it won't allow me to select from the drop down list. The error message that says that the field is too small for the value. I tried changing each of the yes/no properties one at a time but none of them change the outcome.
I currently have a query that uses a function to get the current users email address. This is matched with a "Teacher Email" address in a table of students to only show students which match the logged in teacher. I'd like to modify this so the teacher can see any student in their department. Is there a way to do this without creating a separate "Teachers" table that would contain a department and email?
I'm trying to determine the SQL to return only those records in a table which have duplicate values in each of two fields, but different values in a third field. Here's an example:
Code:
AcctNum FoodType FoodClass ------- -------- --------- A123 Apple Fruit A123 Apple Fruit A123 Grape Fruit A456 Potato Vegetable A456 Potato Perishable A789 Carrot Vegetable A001 Banana Fruit
For the above table, I'm trying to return records which have multiple entries for AcctNum + FoodType, but DIFFERENT values for FoodClass. So for the above table, the query would return:
It returns these two records because there is more than one record with for the AcctNum + FoodType (i.e. 'A456' + 'Potato'), but DIFFERENT values for FoodClass (i.e. one record has 'Vegetable' while the other has 'Perishable').
If I want to sum the percentages from April, May and June only if a column is Not Null, how would I do that?
example
Tbl 1 PK, Month Percent
Tbl 2 FK, Month Enrolled Qty of Rx in the 1st month enrolled Qty of Rx in 2nd qtr Base (if Qty of Rx in 2nd Qtr is null then Qty of Rx in 1st month enrolled)
If Qty of Rx in 2nd QTR is NOT NULL then QTY of Rx in 2nd Qtr * Sum of April Percent+May Percent+June Percent, otherwise Qty of Rx in 1st month enrolled * Month Percent
Im getting stuck on how to sum the percents of April, May and June and then multiplying the result times the Qty ONLY IF the field is not null.
I only know how to create Query's using the design mode. I dont know how to write SQL statements.
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code: TRANSFORM IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT SELECT PT_LEVEL.INF_YEAR, PT_LEVEL.INF_MONTH, PT_LEVEL.UNIT
How to write an expression/criteria in a query that will return only ID numbers with alpha numeric values. Example: My Id field contains both numeric 479621, 680530 and alpha numeric 132NAV100, 174NAV26a values. I want to run the query to return only the alpha numeric values.
I am trying to map certifications done by colleagues in my department.There are 4 certifications and I have which I have pulled out from the Certifications tables using individual query for each certification.Now, I want to add "Certification-Name_Certified" col which will have "yes" or "no" values for each certification to the master data of the department personnel as it only have unique records using a query.
same as the title goes, why i can't query those figures greater than 15% only? How am i suppose to query them right?.Here is my database you cant check query1 and query 2. I am using Ms Access 2010.
I have two date fields in a table. I need to find the days between these dates and, if its greater than 7 days, I want to display the record in a report, so far, I have found a hand function that allows me to enter two dates and it returns a long data value representing the number of days in between the two dates. (google "I've developed the following code to count the business days between 2 dates." and its the second one that starts as SOLVED I made no mods to it as it does what i need it to do.
So, i added this to its own module within the data base for use within a query. My test query basically displays the unique ID, the start date and the end date and then displays the values returned from the function. here is the SQL:
SELECT [Main Table].[Unique ID], [Main Table].[Start date], [Main Table].[End Date], (Business_Days_Between([End Date],[Start date])) AS [Days between] FROM [Main Table] WHERE ((([Main Table].[Start date]) Is Not Null) AND (([Main Table].[End Date]) Is Not Null));
When ran, this Query works... However, when I enter a criteria like =2 or > 7, it says data type mismatch. I have even attempted the CInt() function to make sure its formated as int but i continue to get the same error.
Using sql or access query I would like to create an expression that aggregates the first field and I would like to see all records grouped by the relationship with another field. Let me show an example.
My query shows:
field1 field2 apple a apple b banana a carrot a carrot b dog b elephant b
I would like my query to now display a third field and group field :
field1 field3 apple both banana a carrot both dog b elephant b
ok.. here is a pickle..my table layout is like so..http://www.londonheathrowcars.com/hoo.jpgthe job table stores the main job details.. every job will be in this tableSOME jobs will have incoming flight details... some wontSOME jobs will have outgoing flight details.. some wontSOME jobs will have incoming AND outgoing flight details.. some wont have anyalso SOME jobs (credit card jobs) will have credit card details.. some wontthis is the general problem i am facing..there are 2 records in my job table..jobref no. 020jobref no. 021jobref no. 020 has incoming flight details.. outgoing flight details.. and credit card details.. which means... the job ref no. 020 is present in all 4 tables..jobref no. 021 has incoming flight details.. it does not have outgoing flight details or credit card details.. which means the job ref no. 021 is present in the job table and the incoming flight table onlyi want to create a form that displays every field in the database..my idea is to make a query using all four tables.. and then the form will display the results..HOWEVER!!!!!!!!the form will only display the job ref no 020.. because job 021 is not present in all the tables...why.. is there a way around this.. cant it just display both records and if job 020 does not have card details.. just leave those fields blank.. then on this form.. if i happen to add card details to job 021.. it will just create the record in the card table using the same ref no..is that clear.. someone please enlighten me
in my query i have multiple tables, one table just has one field called product thats joined to another table the other table displays a list of all products, if the product is in the other table.i want a "X" to display in that field both columns are text the IF im using is,
IIf([Product] Is Null,"","X")
but when i run this, it displays no records what so ever, if i take out that iff, it displays all records i want, but that field is the product number when i need an X
I am trying to figure out how to build my query that returns equipment reservations where "date out" OR "date In" are between 2 dates that are specified on my form using [Forms]![Myformname]![StartDate] and [Forms]![Myformname]![EndDate].
The purpose of the query is to find the amount of companies that have had a piece of equipment reserved between 2 dates, which could be a calendar year, or a fiscal year for example.
This is my current SQL statement that returns records where only DateIn falls between the criteria. My objective is to also return records where DateOut falls between 2 dates.
I have a database that contains details of payments returned to a bank account without sufficient information to identify who the money belongs to.
The DB is used by a team of people to retrieve details of an individual entry and when they have figured out who the money should be sent to they can mark that the payment has been "located". We can only send the refund at certain times of the month, so there is another activity "applied" where we have entered details on internal systems for the refund to be processed. Finally, once a month we physically transfer the money out of the bank account and add a "completed" date to all entries that were "applied" before that date.
My manager would like to be able to look back at a certain date to see what the balance was so he can make charts and whatever else in Excel. The balance will be all payments that were not marked as "completed" on that particular date.
I'm having trouble making a query that will give him the balance for each day in the past.
The important tables/fields here are
TBL_MAIN - dateReceived (date) and amountRefunded (currency)
TBL_DATES - activityDate - just a list of dates, which I use for a similar query of the amount we located/applied each day
So I'm looking for a query that will list all dates in tbl_dates against the sum of amountReceived up until that date, with the sum of amountReceived where completedDate is less than the date listed subtracted.
How to build a query in Access 2010/13 that will not display any records that are older than 3 hours? See below for more specifics.
The criteria would be based on a field that houses the time (End Time) and also a field that houses a number (Status). So, only if the field in the record says 3 (based on the Status field) then it should not display the record after 3 hours (based on the End Time field) of being changed to a 3. Is it possible to do that?
I have attached a screenshot of what I am referring to.
I am looking for a way to either display through a query with an expression or any other alternative that someone may have to display the last 100 records entered maybe based on date entered or something.
At the moment i have a query and report going form start date to end date but would also like a query/report that will just show me the last 100 records entered.
I have a date field in a table. I wish to display in a query:Column A representing the month. Column B representing the number of records in the table corresponding to that month.
I have a db which has a query. This query is rather simple where it filters fields based on criteria. Here is the SQL VIEW:
SELECT DSResult.STATUS, DSResult.TESTCODE, DSResult.BATCHNO, DSResult.TESTNO, DSResult.TESTDATE, DSResult.CODE FROM DSResult WHERE (((DSResult.STATUS)="TESTED") AND ((DSResult.TESTCODE)="41015" Or (DSResult.TESTCODE)="41016") AND ((DSResult.BATCHNO)<>"1") AND ((DSResult.TESTDATE)>=#1/18/2010#)) ORDER BY DSResult.TESTCODE, DSResult.TESTDATE, DSResult.CODE;
I need to alter this query so that where records that have the same "DSResult.CODE" and counted are greater than 20 occurrences and then display only these records sorted in DSRESULT.Code order.
I have a table [maintable] that holds print records, with the following fields :
id,userlogon,printername,pagecount,color(yes/no),duplex(yes/no),timestamp and papersize.
I want to create a query that will show the following:
Sum of pagecount where papersize like 'a4' and between 2 dates but FOR EACH USERLOGON.The dates will take them from 2 fields in a form so i will use this
"WHERE (((maintable.Timestamp)>=[forms]![reportsform]![frmdate] And (maintable.Timestamp)<DateAdd("d",1,[Forms]![reportsform]![todate])))" and some more..
So i want the query to show,first the userlogon then a field to show sum of a4 then a4 color prints etc..(remember,i want the between 2 dates criteria to be global,to the whole query)
here are all of the criteria fields i want:
1) - papersize=A4 2) - papersize=A4 and Color=True 3) - papersize=A4 and Color=False 4) - papersize=A4 and Duplex=True 5) - papersize=A4 and Duplex=False 6) - papersize=A4 and Color=True and Duplex=True 7) - papersize=A4 and Color=True and Duplex=False 8) - papersize=A4 and Color=False and Duplex=True 9) - papersize=A4 and Color=False and Duplex=False
