Queries :: Crosstab Queries - Export Command Ask To Enter Date Parameter Twice
Feb 24, 2015
I have a crosstab queries which uses the date query parameters. However, when I go to my Export command (code is below), it ask me to enter the date parameters (start date and end date) twice. What do I have to do so that the system will ask me to enter once only?
Code:
On Error GoTo Err_cmdTest_Click
'Must 1st set a Reference to the Microsoft Office XX.X Object Library
Dim dlgOpen As FileDialog
Dim strExportPath As String
Const conOBJECT_TO_EXPORT As String = "qryEXPORT"
I have the following database, in my query I am trying to do a calculation as the value parameter within the corsstab.
Ultimately I an trying to get month as the Row Header (from date) and Category as the column header. The Value inside the table I am trying to calculate is A/(B-C-D)...
I have a report based on a crosstab query with a subreport based on a second crosstab query both the crosstab queries have the same 3 parameters (2 as string, 1 as boolean) which I pass through a dialog form that closes after the report is opened (in preview).looks like everything works fine at least for the first page of the report but when I try change page, it prompts me to re-enter the parameters. Of course, if a do not close the parameters form I will not have this problem but that is a popup dialog which I do not want to close manually after the operation is done
So I tried to pass the form input first to a Public variable then to a Public Function but I was not able to reference neither of them in the PARAMETER statement of the 2 Xtab queries..As a function, each of the following declarations prompts for input at runtime::
MyFunction, [MyFunction], [MyFunction()], [=MyFunction()] while the following are not accepted (syntax error) MyFunction(), =MyFunction()
Every time I run a query that I have created it asks me to input Expr1 and Expr2 in an enter perameter value pop up box. I don't enter anything, just click okay and the query runs as expected.
Is there a way to get rid of these? (and maybe more importantly, why do they appear?)
I have a table that has three columns: Nationality, Gender, and Date. First I had the problem of grouping the Nationality column by Gender. That i resolved by creating a crosstab query. Now, I want to put a criteria on Date field so that when the query is run it will ask for the date input and will only show the Nationality and Gender result for specific dates. But when I write something in Criteria field it shows an error saying: "The Microsoft Access database engine does not recognize "[Registration Date]" as a valid field name or expression"..
I have created a db with 10 linked tables from 10 db's. I then build 10 queries associated to these linked tables. The 10 queries filter data by start date and end date. The data generated from each query is then exported to excel (each query has its own sheet in the woorkbook).
I am trying to mail merge from word 2013 to a query in access 2013. I initially had problems displaying the query until I came across a solution regarding connecting via DDE. I can now link to the query but it then asks me to 'enter parameter values' from the query. I have already run these values into the query via a form which ends up in a report. (incidentally I have left the report open). If I manually enter these parameters it works fine.
I have had my 4th SQL/APP Dev lab class, however I missed the 5th.
Our 5th lab was .
1. Create 3 tables, populate with given data and create relationships. 'Customer, Invoice, Payment'
2. We were given 8 queries to try do, we had to come up with which commands would be used.
I have no 1 completed.
As for no 2.. we are still learning all the commands, so the lab here is for us to find what commands we think will be used. I have researched and have them all 6 queries we have to run.., I have all those commands written out on paper which I think are answers..how to find the command line to test them.
I cannot sort below query in descending order by absolute value. If I do not use sort, all works fine but as soon as I try to sort by absolute value I get message to 'Enter Parameter Value'. I tried to replace Abs([Variance (W2 - W1)]) with filed name AbsoluteValue and still the same result ;(
Code:
SELECT [Query Union].[Stock Code] AS SKU, [Query Union].[Pallet No] AS [Pallet No], [Query Union].[Batch No#] AS Batch, IIf(IsNull([qW1 SOH].[Physical stock]),0,CDbl([qW1 SOH].[Physical stock])) AS [W1 Qty], IIf(IsNull([W2 SOH].[Good Stock]),0,CDbl([W2 SOH].[Good Stock])) AS [W2 Qty], [W2 Qty]-[W1 Qty] AS [Variance (W2 - W1)], Abs([Variance (W2 - W1)]) AS AbsoluteValue
I have a list (table) that I've created in sharepoint 2010.I link to the sharepoint table with Access 2010 to update mass amounts of items at once. Some of the queries have no problem updating the sharepoint items, but other queries require me to "Enter Paramater Value."
In this particular queries; I'm trying to populate field A with dates from field B, when field A is null.
--------------------- UPDATE Table 1 SET Table.[FieldA] = [FieldB] WHERE (((Table 1.[FieldA]) Is Null)); --------------------
When I run the above, I receive the "Enter Parameter Value" input box.All records have Field B populated (it's actually the created date.)
The goal is for field A to be populated with the values in Field B, without the query asking for parameters.
Note; I can go in each individual record and update them via access, one at a time. But it's the running of the update query that failing.
I have 5 queries that I am running. The first query has the date range parameters set in the field area that I need to run and each additional create table query is based off the results of the previous query.
1. Which is better to use to run all of the queries in one simple step? A macro or a form? I am exporting the final table to excel so that I can make some additional adjustments off of it.
2. How would I setup the date range parameters for the first query if I were to use a macro without going into the query itself and updating the date field? I tried setting up a macro to run the queries by using the OpenQuery action for each of the 5 queries, but I cannot figure out how to do the date range.
I have a table of data going back to 2007 that needs to be looked at on a monthly/quarterly/annual basis. I am able to filter the data when running a normal query by using
Between [Start Date] and [End Date]
in the Criteria section of the Date field. I now need to apply this same idea to a crosstab query. My current set up is:
[Gender]- Group By / Row Heading [Plan Type]- Group By / Column Heading [Pmt Amt]- Sum / Value [Date]- Where / Criteria = Between [Start Date] and [End Date]
I am getting an error message that says:"The Microsoft Office Access database engine does not recognize '[Start Date]' as a valid field name or expression."Am I setting something up incorrectly or is it impossible to use input prompts in a crosstab query like this?
I have simple crosstab query that I use to pull data about how many products is selled in one day/week/month and so on. On entry form I have two critical date fields, Starting/Ending date. It all works perfect except when I put indetical values in both those fields.
For example I have sold over 100 items on 4th of february 2015. year. So, in Starting/Ending date field of entry form, I put value from 04/02/2015 to 04/02/2015 in order to see how much items was selled that day.
This is the error I receive:
Quote:
An error was encountered
Description: The Microsoft Office Access database engine does not recognize '' as a valid field name or expression.
I have a report that is based on an underlying query.At the query level,I want to define parameters of date data type so that records to be displayed should fall between DateA and DateB. ie Between[Enter Date A:] And [Enter Date B:]. I want the DAteA and DateB to be only days and Months of a year.
Say my DateA = 01 Jan 06 and my DateB = 31 Dec. 06
But I want only the Parameter to be Between[Enter day and Month A:] And [Enter day and Month B:].
How can I write a query with the two parameter values?
I'm creating a query with VBA, then exporting it to Excel. I have a couple calculated date fields that are exporting in the format of dd-mmm-yy, but I want them in the mm/dd/yyyy format. In the query, they're in the proper format, but not in the export. I tried using Format([DateField],"mm/dd/yyyy"), but then they left align in the export, but are fine in the query.
'WHERE ((OperationalRiskEventTable.DateReported)>=Forms!U pdateForm!UDateBegin And (OperationalRiskEventTable.DateReported)<=Forms!Up dateForm!UDateEnd)'
in a query by form.
The problem is that you have to enter a date in the between values for results to show. If I don't enter information into a different field such as Full Name but I enter in 40 into Age then everyone that is 40 years old will show. On the other hand if I enter 40 into the Age field but I leave the Date Reported fields empty then no results will show.
How can I change it so that I don't have to enter dates into the date reported fields for results to show?
I have a query that is hard coded with a date range.
SELECT tblCase.CaseId, tblCase.ReqReceived, tblCase.Letter_AMPI, FROM tblCase WHERE (((tblCase.Letter_AMPI) Between #4/1/2014# And #3/31/2015#)) OR (((tblCase.ReqReceived) Between #4/1/2014# And #3/31/2015#)) ORDER BY tblCase.CaseId;
I would like to create a parameter query that allows me to only enter the year and the query would append the rest of the date range. So for example, if I prompt the user to enter the date and they enter 2014, the query would know that it means Between #4/1/2014# And #3/31/2015# or if I enter 2015, it means Between #4/1/2015# And #3/31/2016#.As well the date would need to go into both fields ReqReceived and Letter_AMPI.
I have a database with a Date of Birth field. I have a query with a field that calculates the age from the Date of Birth (DateDiff("yyyy",[Date of Birth],Date())+Int(Format(Date(),"mmdd")
As a criteria in this field I want to be able to select a minimum age, so >=[please input minimum age]
However the results are bizarre - sometimes it gives the right answer, and sometimes not. It seems to have a particular problem with ages above 10, which show up all the time.
Within a query, I'd like to reference another query field based on a date specified as a parameter.
In my query, there are fields for each month: [January],[February], etc.
I have a field titled [Current Month], based on the parameter [As Of Date]. So if when running the query, the parameter pops up and I type 5/6/2013, it knows that the month is May. I know how to return May in the current month field (format([As Of Date],"MMMM"). But how to I return the value that is in the May column?
I'm trying to create an query that has two separate expression in it and a date selection criteria. The first expression is,
Expr1: DateDiff("s", [Arrival Time 1],[Departure Time 1])/3600
and the second is,
Expr2: IIf([Expr1]>[Hours Per Day],[Expr1]-[Hours Per Day]
When I run this query it asks me for the date (which is fine) but then it also pops up a box asking for "Expr1". How can I get "Expr2" to use the value returned from "Expr1"?
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code: TRANSFORM IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT SELECT PT_LEVEL.INF_YEAR, PT_LEVEL.INF_MONTH, PT_LEVEL.UNIT