Queries :: DCount Against Two Criteria
Nov 5, 2013
I am looking to create a summery on a dataset. I have
Employee ID Duration
1234..............10
1234..............20
1234..............8
1234..............9
1236..............40
1236..............2
1236..............20
1236..............10
I want to summerise the data to calculate the number of times an employee has an entry under 20 and the calculation. e.g.
Employee ID....Count.....Sum
1234...............3...........27
1236...............2...........12
I used a DCount however this does not separate the employees. Currently using
Count Of Visits: DCount("[Duration]","Test Query","[Duration]<20 AND [Employee ID] = [Employee ID]")
View Replies
ADVERTISEMENT
Feb 8, 2015
I am trying to count the amount of records that were created and closed for last month but I am having problems inserting the correct criteria along with the DCOUNT syntax. DCount("*","obsvnofilterqry","(Date_Closed)=MONTH( Date())").Works fine but figuring out how to get the amount of Date_Closed for last month is proving tricky.
View 11 Replies
View Related
May 16, 2005
Not sure if this belonged in reports or queries, so I chose general. I have looked at several DCount threads but haven't quite found my answer. I want to use Dcount in an unbound textbox in a report. It counts the number of records in another table - comparison
the first part of the statement works fine ( up to 'iss'"). When i added the between date part i'm not getting any # returned in my report. I want to addthe criteria of RecDate between the 2 dates on the open form.
Can anyone tell me where my problem lies? ( if this makes sense)
Thanks
Kevin
=DCount("[type]","comparison","[type] Like 'iss*'" And ("[comparison].[RecDate]" Between Forms!DateInputforRMAsReturned!Text0 And Forms!DateInputforRMAsReturned!Text2))
View 14 Replies
View Related
Jun 26, 2015
I have a field named Poisition_Id and a yes/no field with the name Hired, what i want is dcount under condition initially with Position_ID to Position_ID then to see the field of hired if "yes"
Example:
=dcount "a" see in tbl_open with criteria position_id = position_id with criteria hired=yes
I am unable to write this formula..
View 1 Replies
View Related
Feb 3, 2014
I can't get the following DCOUNT working for the life of me: DCount("EmployeeName", "tblAttendance", "EmployeeName = '" & cboEmployee Name. Value & "'" And "AttendanceDate = #" & txtAttendanceDate.Value & "#")I have checked this forum along with Google and there seems to be no easy way to do this? I have tried editing the syntax over and over again. I have been able to run a query and get the desired result in that query; however I am unable to call that result in VBA.
View 7 Replies
View Related
Apr 19, 2014
With a form with two fields one is a date field formatted as short date and the other is a lookup combo box that I use to lookup predefined times and is formatted as short time. The date and time are stored in the same table as date/time in separate fields. I attempted to use Dcount, and get syntax error missing operator. Below is one of a hundred that i have tried after scouring this forum and the net. I ended up converting the Appt_Time field to a text field in the table to eliminate one date field but still got no where.
Code:
Private Sub Appt_Time_BeforeUpdate(Cancel As Integer)
'Check table for duplicate
If DCount("[Appt_Time]", "tblexams", "Appt_Time= & Appt_Time & And [Sch_Date] = #" & Sch_Date & "#") > 0 Then
'Message box warning of duplication
[Code] ....
View 4 Replies
View Related
Oct 7, 2014
I am working with MS Access 2003. I have a form (frmCalendar) with a textbox (tbDay) and a combobox (cmbLineName)
I want to count the number of records based on the criteria from cmbLineName, and show the result in tbDate. Inside the Control Source of tbDate I put in the following:
=DCount("[EncounterID]","tblEncounters","[LineName] = ' " & "Forms![frmCalendar]![cmbLineName] = " ' ")
The problem is that the result in tbDate is always 0; regardless of what is chosen in cmbLineName. I know that the record count should not be 0 for all criteria.
View 4 Replies
View Related
Aug 25, 2014
Code:
DCount("*","[tblLeaveRequests]","Status='Approved' And #" & Format([vDate1],"mm/dd/yyyy") & "# BETWEEN [LeaveStartDate] AND [LeaveEndDate]")
The above code counts all leave with the status of approved on the table [tblLeaveRequests]. Great, but i did forget a critera.
Of the leave it is counting, I want it to only count if the employee the leave is for is in a particular location. which exists on the related table, and not the one dcount is calling.
Is this possible? or will i have to resort to replicated data in [tblLeaveRequests]
View 3 Replies
View Related
Jul 19, 2015
The following code is giving me a "Run-Time error '13' Type mismatch. I have tried isolating both criteria and they seem to be fine but joined together with "AND" they error. Workdate is a Shortdate. Flightnumber and flightID are numbers. FlightID source is a cmb within my form.
Private Sub FlightID_BeforeUpdate(Cancel As Integer)
If DCount("[WorkDate]", "Main_tbl", "[WorkDate]= #" & Me.WorkDate & "#" And "[FlightNumber] =" & Me.FlightID.Column(0)) > 0 Then
Do this....
End If
View 1 Replies
View Related
Mar 14, 2013
I have a textbox on a form. I am using
Code: =DCount("*","suspend_time_lapse",[Days from Target to Planned End dates]>5)
as the text box source. I get name? or error no matter what i do.
I want to count all records in the [suspend_time_lapse] table where [Days from Target to Planned End dates] is greater than 5.
View 4 Replies
View Related
Jun 5, 2014
I have a report that I am trying to complete based on several queries. I am trying to count the number of records based on certain criteria and using the following DCount.
=DCount("[Calculated time]","IPG1","[Calculated Time] <= 0.04" And [Ship-to party] In ("SN00207PJZ","SN09162XXX","SN09324XXX"))
I want to count the number of IPG1 records that are under .04 and have the Ship-to party of the ones listed. I have tried everything that I can think of to get it to work but can's seem to get it to. I figure it's something easy but I don't see it.
View 4 Replies
View Related
Jan 13, 2014
Using MS Access 2000
I'm building a customer management database. Part of which is a table to record details of all members of the main customers family or the household compliment.
I'm currently using a DCount to work out how many people on the table are related to my client, to work out the size of the family.....
=DCount("MemberID","tblHHMembers","CustID = [CustID]")+1
Could I also then count the members of the household that are under 16 years old by looking at the DoB from the same household members table?
I realise that I'd need to ask access to calculate age at the same time as working out if they're under 16 and then count them if they have the same Customer ID - which might need a little more than this single function!
View 2 Replies
View Related
Dec 8, 2013
I am working with DCount in a query based on a calculated value [MyCalValue] that is a status.
The status can be: Complete, On Going, Past Due, Additional Information, No Date.
In the DCount, I want to return 0 if null.
Sample that works fine
Code:
Green: DCount("[MyCalValue]","Open Issues","[MyCalValue] = 'COMPLETE")
But I want combine values in an OR statement but can't get it to work.
Code:
Green: DCount("[MyCalValue]","Open Issues","[MyCalValue] = 'COMPLETE OR On Going")
Also not working is when I am trying to get a count based on the month like this:
Code:
LastMonth: DCount(Month("[RequestDate]","Open Issues","[RequestDate] = fLastMonth(Now())",0)
View 7 Replies
View Related
Oct 31, 2013
I am trying to use DCount to count the number of records (speakers) for each session. Not being very savvy with DCount, I copied code that I had working for another instance of needing to count the number of records.
My query has three fields
Query used: Web/PrintReport_qry
Session Id - number
Speaker - string
Code:
SpeakerCount: DCount("*","Web/PrintReport_qry","[Session ID]='" & [Session ID] & "' And [Speaker]<" & [Speaker])+1
My output for SpeakerCount is "#Error"
View 10 Replies
View Related
Sep 10, 2013
I have a DCount Ranking query that worked fine last week and with this week's data came up with a glitch. Here is my DCount statement in the query:
Rank: CInt(DCount("*","qry_YTD_Territory_Totals","[Total]>=" & [Total]))
Here is my result which you can clearly see is not a tie.
Territory Total Rank
A 540.86 1
B 398.85 1
C 341.75 3
[code]...
View 1 Replies
View Related
Jun 24, 2014
I have a large table (>1M rows), and I have searched various forums for a way to add sequential numbers by Group. The query I have works, but since it's a large table, I broke it up, and did everything what starts with A-E, the F-Q, etc, and appended to a new table.
This query works, on anything that starts with the letter D or later... A-C will not work.
Basically, the source table is a list of all combinations of Part_ID and UPC_Code. I am trying to number the UPC_Code field, per Part_ID. There is an AutoNumber field (ID) that is in the table as well.
This is the SQL. Query1 is the query that is being executed, so the DCount is within this same query, if that makes sense.
Code:
SELECT tbl_upc.ID, tbl_upc.Part_ID, tbl_upc.upc_code, DCount("[Part_ID]","Query1","[Part_ID] = '" & [Part_ID] & "'")-DCount("[Part_ID]","Query1","[Part_ID] = '" & [Part_ID] & "' AND [ID] > " & [ID]) AS Seq_Num
FROM tbl_upc
GROUP BY tbl_upc.ID, tbl_upc.Part_ID, tbl_upc.upc_code
ORDER BY tbl_upc.ID;
The results of this query are that all Part_IDs that start with A through C produces a Seq_Num of 0, but any that start with a "D" or later number correctly - in other words, the first instance of a particular Part_ID is 1, then 2, and so on up to the total count of that Part_ID.
Running Access 2013.
View 2 Replies
View Related
Feb 4, 2015
I am using the dcount function as the example I display below. The problem is that it returns the correct result (i.e. 59) but the data type is text (59 is on the left side) . I need this to be number.
=DCount("[OrderID]", "Orders", "[ShipRegion] = 'CA'")
View 3 Replies
View Related
Dec 2, 2014
I have 3 cross tab queries that are completely identical with the exception of the field that they pivot. Each field is searching for the same values just in different columns, with the end goal being to get the sum of the values for each pivoted column. I'm wondering rather than having 3 almost identical queries is there a way to use a crosstab to sum the values from each of the three fields rather that having 3 queries which then have to be aggregated in a fourth?
QUERY1
Code:
TRANSFORM
IIf(Count(PT_LEVEL.UNIT) Is Null,0,Count(PT_LEVEL.UNIT)) AS CountOfUNIT
SELECT
PT_LEVEL.INF_YEAR,
PT_LEVEL.INF_MONTH,
PT_LEVEL.UNIT
[code]...
View 2 Replies
View Related
Mar 5, 2006
Hi group members
I guess this is a fairly basic question but bear with me.
As with all newbies 'how can I' type questions come thick and fast and this one involves using Criteria in a Query. I am comfortable with the concept of prompting for a variable within a query using the square brackets ie.[Enter Post Town]. This of course relies on the person entering a valid value or spelling it right.
So I thought, what if I make Post Town a Combo box (I am working with a small sub set of places). Which then brings me to my question.
Can I create a query (which runs a report) that when activated will prompt for variable (in my case Town) and display the drop down list ?
Thanks in anticipation
Les Wilcock
View 3 Replies
View Related
Aug 1, 2007
I Currently have a query that has various information on it. WHen i click to open the query, It states to "enter line number", where i can enter a line (e.g. line43). If entered EXACTLY as it is found in the table where i took the information from, the records will show. However if i type in 43, or L43 or line43/44, nothing will show up. How can i make it so that there are multiple ways to show records, when i enter different information? (There are about 8 different lines).
Thanks to anybody who takes the time to help me solve this problem.
View 4 Replies
View Related
Apr 18, 2008
Hello everyone
I am just trying to write a query by a code of table
i would like to pick up any record with id number betwee 1-99 and 200-299
i try typing them in manually but access wouldn't cope
any idea of how i can achieve it please
Many Many Thanks
Si
View 2 Replies
View Related
Jun 2, 2007
Is there a way to produce one query that will produce several results that display in a report that is generated from a button? The only difference is the criteria.
EX:
SELECT tblDownTime.dtDate, tblLine.lineName, Sum(tblDownTime.dtDowntime) AS [Total Time Down]
FROM tblMachCent INNER JOIN (tblLine INNER JOIN (tblCategory INNER JOIN tblDownTime ON tblCategory.catID = tblDownTime.catID) ON tblLine.lineID = tblDownTime.lineID) ON tblMachCent.machID = tblDownTime.machID
WHERE (tblDownTime.dtDate) Between [Forms]![frmDTGraphs]! And [Forms]![frmDTGraphs]![end]))
GROUP BY tblDownTime.dtDate, tblLine.lineName
HAVING (tblLine.lineName)="[B]name of line");
criteria being name of line. Choices being line 1 or line 2
What I am looking for is one query to somehow generate the info on the two different lines in two different reports.
Is there a way or do I actually have to write the different reports?
View 4 Replies
View Related
Feb 8, 2008
New to this site. very impressing
I am trying to create a crosstab query, but can get it right.
Table1 = input Table
__________________________________________________ ___________
name StartDate date Present
A 1201 1201 P
B 1202 1205 P
C 1203 1206 P
D 1204 1207 P
E 1206 1209 P
Can get this result with Crosstab Query;
TRANSFORM NZ(First([Table1].[Present]),"a") AS FirstOfPresent
SELECT Table1.name, Table1.StartDate
FROM Table1
GROUP BY Table1.name, Table1.StartDate
PIVOT Table1.date;
__________________________________________________ ____________
name StartDate 1201 1205 1206 1207 1209
A1201 P a a a a
B 1202 a P a a a
C 1203 a a P a a
D 1204 a a a P a
E 1206 a a a a P
But am looking to add NA for StartDate > Header Date(1201,1205,1206,1207,1209). See below. Does anyone have a solution or an alternate method
Looking to get this type of results
__________________________________________________ ____________
nameStartDate12011205120612071209
A1201 Paaaa
B1202 NAPaaa
C1203 NAaPaa
D1204 NAaaPa
E1206 NANAaaP
A=Absent
P=Present
NA=Non Applicable
Thanks Tony
View 2 Replies
View Related
Apr 8, 2008
Ive had a quick look at other threads to see if this question has been asked already, so hopefully Im not repeating a previous question!
I am completely new to Access but have been asked to perform multi-criteria queries across multiple tables. I realise it would be easier to just put all the information into one table, but if anyone could explain how to do the above I would be very grateful.
Thanks
View 6 Replies
View Related
Nov 11, 2004
I have a table that I want to append to another table, but I do not want to duplicate records if the check number is already in the table I am appending to. I have tried
<>[deposit].[check_number]
or
not like [deposit].[check_number]
or
not [deposit].[check_number]
but I always get prompted to enter a check number... therefore the criteria statement not working.
do not know what I am doing wrong.
View 5 Replies
View Related
Nov 23, 2005
I have multiple queries pulling data from multiple data tables but are all common by a date that I have to enter in the criteria field for each query each time I need to change the date. Is there a way for the criteria field to read data (the date I want) from somewhere so I only have to change the date in one place and is read into each query where specified? I'm having to go into many queries to change the date criteria which I change to the same date for all queries - I'd like to do it once and have the queries read that date.
View 1 Replies
View Related
