I have operators that enter equipment downtime information into the database. I need to create a report that pulls all records that have a start date and time based on a start date (field name FromDate on form) at 7:00 AM to an end date (field name ToDate on form) at 6:59 AM and shows the total duration in hours for each record.I'm having difficulty getting my query to display the correct results for the date and time range. Duration calculations work perfectly.Here is my main table only using fields pertinent to this post:
Field Name Data Type Description
Exception_Number AutoNumber Primary Key
ExceptStartDate Date/Time Start Date formatted as Short Date
ExceptStartTime Date/Time Start Time formatted as Medium Time
ExceptEndDate Date/Time End Date formatted as Short Date
ExceptEndTime Date/Time End Time formatted as Medium Time
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName FROM Staff INNER JOIN myTable ON Staff.ID = myTable.StaffID WHERE myTable.myDate >= #3/2/2014# AND myTable.myDate <= #3/3/2014# AND myTable.myTime >= #8:00PM# AND myTable.myTime <= #11:00PM# ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I have a weekly list of transactions that come in the format DD/MM/YYYY HH:MM:SS, I need to tag these individual transactions with a week number. The problem is, I can't use the Datepart function etc. as the day is classed as running from 8am to 8am rather than midnight. I have a list of all of the weekly date ranges for a few years (with the time) so I was able to solve this problem in excel by using the Index and Match functions. However, I'm trying to automate this process as much as possible so I'd rather perform this function in Access.
Can anyone tell me if it is possible to input just one date range into a report that is accessing data from multiple table and multiple queries. I can create the report which gives me the info needed but I have to put the same date range in 3 or 4 time before the report is generated.
I have a form that request information from the user (StartDate, StartTime, EndDate and EndTime) the problem is that it's not working. The only way I can get any data to show is when I remove the StartTime and EndTime. Only then will it pull the items from the StartDate and EndDate.
Here is what I have as my criteria: Between [Forms]![OpPROD_ALL]![StartTime] And [Forms]![ OpPROD_ALL]![EndTime] And Between [Forms]![ OpPROD_ALL]![StartDate] And [Forms]![ OpPROD_ALL]![EndDate]
The users will be able to request a report based on a start and end date along with a start time and end time.
Side note: this is to pull date for 3rd shift (Example) 4/14/2013 10:00PM - 4/15/2013 10PM
Is there a way to show the earliest and latest dates of a report generated by a non-date field?
E.g. I generate a report based on Food, and it'll list the days that this food is associated with. Is there a way to show the first and last day that appears in this report (i.e. the range of dates that the report shows based on the food selected)
I have a report that I want to pint the beginning date and ending date range that the report was based off of. I have a query that prompts for begining date and ending date
I have created my report for a table and how I want it to look. The problem is when I enter my dates the report pulls however at the top of the page the range of dates just says #name rather than the dates I entered. I used sample information from a database access creates to make my report and the dates not showing up are the only issue so far. I entered sample orders into my table. The dates to enter into the date range would be 11/01/01 through 11/30/01. I have attached this sample, can someone help me with what i am doing wrong please. I'm just not sure, I have been having a lot of problems creating this database.
I'm having issues with reports. What I want to do is only print specific dates in a report. I have read and tried everything to accomplish this but it just isn't working. Any suggestions????????????
I created a query with: Between [Forms]![Dummy]![StartDate:] And [Forms]![Dummy]![EndDate:] in it.
I created a Form with two text boxes named StartDate and EndDate and appropriate labels and buttons.
I then Created a Report, which prompts for dates and finds the data between the given Dates correctly.
Now the problem: When I create a text box in the report of the following form, I get ?Name? error on the Report: =[Forms]![Form Name]![StartDate] This should work? Can you help me solve this last problem and acheive a good working program?
I have a linked table in my access accdb file to a view on a SQL Server DB.
One of the columns is a date column, where only the time value is important, so it's stored in the default format, like 12-30-1899 12:00 AM.
In SQL Server, I can query records that fall between a certain time frame. It works in Access when written as an ADO query (that's another story), and it also works when I convert the view to a local access table.
But when I query it as a linked server, it will return everything is greater than 12-29-1899 11:59 pm, but when I try to search any date/time ranges on 12-30-1899 nothing is returned. This seems to be a bug in Access.
The reason I no longer use ADO, is that the results would not print. For some reason, when I go to print preview, Access would evaluate the query I'm passing through to SQL Server and throw a syntax error. I miss ADP.
I am using a simple " >= [BeginDate:] and <= [EndDate:]" in the criterion section of a query to allow a date range to be selected in the query which is used in a report. How can i get that [BeginDate:] and [EndDate:] info available to print on the report so it shows the actual date range being displayed in the report ? thanks.
I'm trying to make a form where the final user can type in two dates (date range) and the result will generate a report on all activity between those two dates, any ideas ?
I have a database with several clients who have a series of appointments. I want to be able to create a report of all the clients to be seen during a range of dates to be inputted by the user. All help would be greatly appreciated.
The data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.
The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.
I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.
What I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.
I have the following project that works as a timesheet manager:
Users enter in a form the employee name/date/hours worked/role/overtime (yes or no)/rate... on a daily basis. At the end of every week, they must create a report depending on the dates given in a query.
I have only one table (tbl_EmployeeHours) and a query to calculate the number of hours between two dates.
At the moment a report gives me all the information above (employee name/date hours worked etc..) but what I am trying to is a bit different.
I need Access to create a report (based on a date range given by the user) that would give me: per unique name, the number of normal hours worked in total, next column, the number of hours worked as overtime (rate 1.5), then, the number of hours worked as overtime (rate 2).
This means there are 3 different totals. For example, in the date range given, someone might appear twice but in the report he will appear only once with 3 different totals...
My guess:
I would say I need to create a different query for the 3 different totals (normal hours, overtime 1.5 and overtime 2). For each query you would need to ask the user to input the date range (which would not be so user-friendly I agree...). Then, I am not sure how access would create that list of names and combine the 3 different results from the queries...?
I used UNION ALL to get results from two queries and I Succeeded.Now I want these results to be in a date range, so I want to enter the "starting date" then the "End Date" to have may results in specific date range.This is the original code out of UNION ALL which is working fine:
SELECT Count(Patient.PatientID) AS CountOfPatientID, Patient.CauseOfAmpLowerLt FROM Patient GROUP BY Patient.CauseOfAmpLowerLt HAVING (((Patient.CauseOfAmpLowerLt) Not Like "")) UNION ALL SELECT Count(Patient.[PatientID]) AS CountOfPatientID, Patient.[CauseOfAmpLowerRt] FROM Patient GROUP BY Patient.[CauseOfAmpLowerRt] HAVING (((Patient.CauseOfAmpLowerRt) Not Like ""));
And this is what I tried:
SELECT Count(Patient.PatientID) AS CountOfPatientID, Patient.CauseOfAmpLowerLt FROM Patient GROUP BY Patient.CauseOfAmpLowerLt HAVING (((Patient.CauseOfAmpLowerLt) Not Like "")) UNION ALL SELECT Count(Patient.[PatientID]) AS CountOfPatientID, Patient.[CauseOfAmpLowerRt] FROM Patient GROUP BY Patient.[CauseOfAmpLowerRt] HAVING (((Patient.CauseOfAmpLowerRt) Not Like "") AND (PatientService.[Date of Service]) BETWEEN [Start Date] AND [End Date]);
I'm trying to produce a query that shows all records of patients that have a 'non-active' status (stored in the 'Patient Details' table) and haven't had any deliveries after 31/10/2011 (date stored in the 'Deliveries' table). I've tried a few different ways including using NOT IN (which access didn't like!) but I'm still no closer to getting the correct records.
I have two tables. One is about 160 thousand records, which is a part number, a contract price and a day the price took effect. The items appear several times. Prices go up and down over the course of the data, and items are added and dropped.The second table is a list of dated sales and quotes of those items over the past 14 months.(About 10 thousand lines)
I need to match the items with the contract price that existed on the day the quote or the sale was created, so as to demonstrate we were always at or below the contract price.
I am trying to create a simple database to keep track of employee Car Insurances and MOT information.I am trying to create a query that will show me the following:
When the field "motexpiry" is Empty OR has a date within 30 days from todays date (including if today's date is in the field) OR the date is in the past.It also needs to show records with the same criteria for the field "insuranceexpiry".
And needs to show records where the field "cowensform" is blank.These are all OR queries, so that as long as ONE of all of those criteria is met, the record shows up.Once that query works, I need a very similar query but only showing records where one or more of those criteria is met, but only if the record also has "Oldham" in the "area" field.
I can then copy that query and edit the "Oldham" bit to have a query for each of our area offices.I tried putting "Oldham" in the criteria line of the area field in the query design, but it seemed to have no affect.
I'm using a form to select a date range. Using the following, and entering start date of 6/1/14 and end date of 7/1/14 I would expect to pull the records with a date of 7/1/14; however it doesn't. I have to enter and end date of 7/2/14 to pull 7/1/14 records.
>=[Forms]![F_Transaction_Date_Range]![txtStartDate] And <=[Forms]![F_Transaction_Date_Range]![txtEndDate]
I have a query that is hard coded with a date range.
SELECT tblCase.CaseId, tblCase.ReqReceived, tblCase.Letter_AMPI, FROM tblCase WHERE (((tblCase.Letter_AMPI) Between #4/1/2014# And #3/31/2015#)) OR (((tblCase.ReqReceived) Between #4/1/2014# And #3/31/2015#)) ORDER BY tblCase.CaseId;
I would like to create a parameter query that allows me to only enter the year and the query would append the rest of the date range. So for example, if I prompt the user to enter the date and they enter 2014, the query would know that it means Between #4/1/2014# And #3/31/2015# or if I enter 2015, it means Between #4/1/2015# And #3/31/2016#.As well the date would need to go into both fields ReqReceived and Letter_AMPI.
