So I have the following query field which calculates another field.
How do I Filter the records in this calculated field to only return TRUE, as if I put "TRUE" in the Criteria for this field (or anything at all) then a parameter message box pops up asking for [Balance].
I have query with a calculate field to finds the next service due date but I'm having a problem getting it to only show services due dates in the next 30 days.for some reason I cant add a criteria date()-30...I have to calculate the next service it takes service intervals from maskservicemonths field then find the last service date and generates the next service due date NextService: DateAdd("m",[MaskServiceMonths],[FindLast]).
This is not the normal calculated fields in query's. What I want is different, I want it to be like
IFF(ShowID="A",[TotalSales],0)
Thing I have is, I want to know all the Total sales in on row that has Show A in it and then Total sales for Show B. Problem is, I have over 130 shows. How would do that?
I Have some calculated fields in a query and want to update it in the table .So,is there anyway to store these fields.Otherwise can i store this Query data every month in database so that when i re-run the query the previous month data will not be affected.
I am having a problem with calculating a date field in a query. Prior to this posting I've done some research and made several changes to my query. This only resulted in fixing one problem but then creating another problem. Original problem was I had 2 fields, arrived (23:36) and stemi (0:07). I use the following calculation AT_ST: DateDiff("n",[arrived],[stemi]) which resulted in -1409. So my research showed me I had a problem with the date whenever the time went past midnight and trying to calculate a zero hour number. I changed my calculation to
AT_ST: IIf([stemi]>=#11:59:00 PM#,(DateDiff("n",[arrived],[stemi])),(DateDiff("n",[arrived],[stemi]+1440) Mod 1440))
This works fine and gives me the result of 31 minutes which is what I want, however the problems comes in when I change to this calculation any where there was a negative time now has a 1400+ plus value. Such as arrived (7:37) and 1st_eck (7:18) = 1426 where as before it would report -14 (yes, negatives are acceptable for my reporting because sometimes a call to the hospital is placed before the patient arrives so we want to report on the negative splits). I've tried using a nested IIF to calculate for stemi time being less than arrived time, this didn't work when I tried to use it on the calculated query field. I was wondering if I could write something to check the value of the calculated field if it is greater than 1440 and if yes - subtract 1440 from it. So in the example above 1426-1440 = -14. Is it possible to do this within the query or do I need to do it using VBA
I want to calculate a field that is Sales*6+Salary, then in that same query I want to select ONLY the greatest Salary per employee. So for example
SELECT EmpId, MonthDate, Sales, Salary, [Sales]*6+[Salary] AS SalTot FROM EmpTable S1 WHERE SalTot = (SELECT MAX(SalTot) FROM EmpTable S2 WHERE S1.EmpId = S2.EmpId);
Can I not select a value that has been calculated this query?
I went into the properties if that field inside the query design and changed it to Standard with 0 decimal places and it worked fine.
But when I based a crosstab query off the query that contained the above calculated field, I cannot seem to get the numbers to format correctly. 1231313.424 is shown instead 1,231,313 and I don't have a line in the Properties window to even change the decimal places. It doesn't recognize when I change the format to Standard. I have tried using Round([ProjRevNRC]) which gets rid of the decimal places as desired but does not show commas.
I'm sure it's a simple part of the Round expression that I am missing but nothing has worked.
Hi. I have an Order form that is based on an Order table. In this form there are also a number of text boxes (not bound to table) with calculations, and one final text box with a deadline based on these calculations. Is it possible to filter this form based on the deadline? I can do this by making the form based on a query, but then again I'm not able to edit the information in the form.... Please anyone???
I've can do this on excel but don't know how in Access. I'm calculating bonuses. My table has salaries, and my query simply multiples each salary amount by a % to get the bonus amount. But I need to calculate adjustments to the bonuses using the sum total of the bonuses my query calculated:
Salary (from table) Bonus (calc'd by query) Adjustment (to be calced)
100,000 1,000 Sum of total bonuses/salary*4% 90,000 900
How do I capture the total of my calculated bonus column to use to calculate the adjustments in my right-most column?
I tend to work with large amounts of data (extracts from company systems) and I create a lot of Access/VBA based tools to automate processes.
I have an annoying error which has always appeared but I don't understand the root cause of it.
When viewing a query, if I filter, I get an error message pop up (though after clicking through the error I can still use the filter function):
"syntax error missing operator in expression 'name of field'".
This seems to happen when I add several calculated fields. Here are some examples of the conditions and calculated field formulas I'm using in this current one:
Conditions: <>"CINEMATIC" And <>"SFX" Not Like "*_ZZ*" And Not Like "*test*" And Not Like "EP_*" [Forms]![FRMscriptPrintReview]![selectLangCombo]
I get the impression that its more of a bug with Access as the formulas aren't complicated really but need confirmation on this and if there is a way I can avoid it.
I am trying to construct a crosstab that averages a calculated field from a previous query. It is returning a "Data Type Mismatch" message.
The field I am trying to average is a subtraction of dates to find total days. I assume my field is not a number so I have tried to wrap it in CDbl() to change the type.
The formula is
Code: CASE_DAYS: CDbl(IIf([Actual Close Date]-[Creation Date]>=0,[Actual Close Date]-[Creation Date],""))
I have a query with a DateSerial Calculation field that I would like to filter the query by. The DateSerial calculates the same day of every year (5/31/"YYYY"). When I try to add a criteria sort to this field, I get a data mismatch error. Here is the code: ThirdMay: DateSerial(Year(DateAdd("yyyy",3,[LastDayYear])),5,31).
How do I get only dates due in 2015 to show? I have tried all the standard date criteria to no avail.
On [Form1] I have a Multi-Select Listbox[List1] which shows Job Numbers [WBS] (The job numbers displaying are a result of a separate query filtered by the Fiscal Year combobox). When I click [CMD1] I want [Query1] results to only be selected [WBS] from the form.What is the best way to code this? I'm a beginner when it comes to VBA.
I have a query which returns a calculated percent. I have ordered that in descending order, and now want to see the top 50. So (In Access 2010) I entered 50 into 'Return'. But it returns all of the records!
Is this because pct is a calculated field? How can I correct this? The SQL seems to be correct.
Code:
SELECT TOP 50 HeciFail1.POHECI, HeciFail1.POQTY, HeciFail1.FAILQTY, IIf(Nz([FAILQTY])>0,Round(100/([POQTY]/[FAILQTY]),0),0) AS PCT FROM HeciFail1 ORDER BY IIf(Nz([FAILQTY])>0,Round(100/([POQTY]/[FAILQTY]),0),0) DESC;
I have a query with a Date field for EndDate (the dates for end-of-week, Fridays in our case) and another field for Sales (number of sales, not dollars).I want to add 4 calculated fields that represent weeks and have the Sales appear in the correct column (field) for that date.So I will have columns for 10 July 15, 17 July 15, 24 July 15 and 31 July 15 and I want the Sales for each record to land in the correct date column, based on the EndDate column. (The 4 fields is just for the sake of the example, I will actually be having dozens of these calculated date fields).I tried to do it by setting up the 4 calculated fields like:
10Jul15: Sales and then adding Criteria like: EndDate = #10/07/2015# It doesnt work.
I have a several fields, calculated, that break apart a string of text at every open and closed parentheses. They work like they are supposed to with no errors. However, I want to use the result of this particular field in a combo box to populate another combo box with the other half of the string that will be split. The problem, I think, is that since the field is calculated, it will not allow me to select it in the combo box, saying that the field can't be edited.
So, I added the same field names to the table that the query was built on, however when I run the query, it says that there is a syntax error with a comma in the code. If I take out the table in the query, (not using the SQL side, just the query builder), it works again with no problem.The text I am breaking apart looks like this: 1.234(a)(1)(A)(2)(b)(i)(-a-)
I need this field to break the text up at the (1) mark, so the code I am using looks like this:
Code: PrinSubChap1: IIf([Sub2] Is Null,[PrincipleNumber],Left([PrincipleNumber],InStr(InStr(1,[PrincipleNumber],"(")+3,[PrincipleNumber],")")-0))
The other fields I have do the exact same thing, written the same way, with adjustments made to the position (+3,0).I have stared at this for awhile and can't figure out why it is giving me an error and research on the web doesn't appear to cover my question.
This is the error message: Syntax error (comma) in query expression '[mytable].[IIf([Sub2] Is Null,[PrincipleNumber],Left([PrincipleNumber],InStr(InStr(1,[PrincipleNumber],"(")+3,[PrincipleNumber],")")-0))]
I am working with Access 2010, on vista. What I have is a query made up of two tables, one product the other inventory. (see below) query.jpg
In the product table i have a field called "minimum reorder level". In the inventory table i have two fields one called "number in stock" and "number on order". What i want to happen is "number on order" to be filtered by the result, if the "number in stock", is less than "minimum reorder level", if it is, have the result placed in the "number on order" field. EG. if the "number in stock" = 2 and the "minimum reorder level" = 5 then 3 would be placed in the field "number on order" and only the second record from the query would be visible (see below) Query result.jpg The result of this would mean that the field "number on order" would be populated with the result and the and query would also use this to filter the record.
I have a calculated field in a query. The field name is TotatPt (this is to calculate the total points students have earned during the term). The expression is as follows:
I think this should be no complicated expression (though a bit long) and should just add the fields together. But what I get is that the calculated field appears as expected for records with an odd primary key (1, 3, 5, 7, ...) and turns out blank for records with an even primary key (2, 4, 6, 8, ...)!
I'm stuck in Access 2003 - the group I am working with is unwilling to upgrade due to costs, and I've inherited this database (or I should say, a glorified spreadsheet), so unfortunately I am stuck with the tools that I have to use.
So I have Table A:MemberID (autonumber, Primary Key)
NameLast (Text) NameFirst (Text) TLBeginner (Yes/No) - Training level TLIntermediate (Yes/No) - Training level TLContinuing (Yes/No) - Training level TLAdvanced (Yes/No) - Training level
I have created Query1 with the above table and added in a calculated field which essentially takes the training levels and converts it to a decimal number (basing it off a binary number of the 4-bits/Yes-no fields) with the calculated field below:
So the calculated field works great - Depending what training levels are selected or not selected, I get a range between 0 through 15.
Table B: I want a list of "friendly name" for the different training levels.
TLID (Number, No duplicates) TLFriendlyText (Text)
So what I want to be able to do, is to have Query1, that will pull the training level text (TLFriendlyText) within the query based on the calculated field (TrLevelTxtID). The catch is, I can't seem to create a join between the two tables with the calculated field.
Ideally, I want the final query to pull, [NameFirst], [NameLast] from TableA and [TrLevelTxtID] (from TableB) based on the queries calculated field [TrLevelTxtID].
How best to achieve this with the Access 2003 limitations. Also, this query will only be used for reporting/mail merging so there are no update requirements or concerns.
If I have four date Fields in a query, Astart, Bstart, Cstart, and Dstart and want to have a calculated field to find the latest date for each record how would I do that? I have tried things like:
The calculated field converts all percentage marks perfectly fine with grades except 100 which returns to a stupid "E" . I've been trying all sorts and now give up.