Queries :: Filter Not Working In Crosstab Query?
Apr 17, 2014
I have a table like this
Cultureworkload
ReasonfortestingIRLNumberDiagnostic sputum specimens processedFollow up specimens processedReception
Follow up7/20130102-Jan-13
Diagnosis8/20131002-Jan-13
Follow up9/20131002-Jan-13
Diagnosis10/20131002-feb-13
Follow up11/20131003-feb-13
Diagnosis14/20131003-Mar-13
Diagnosis15/20131003-Apr-13
I built a query with the wizard to group by Reason for testing
The SQl was
TRANSFORM Count(Cultureworkload.IRLNumber) AS CountOfIRLNumber
SELECT Cultureworkload.Reasonfortesting, Count(Cultureworkload.IRLNumber) AS [Total Of IRLNumber]
FROM Cultureworkload
GROUP BY Cultureworkload.Reasonfortesting
PIVOT Format([Reception],"mmm") In ("Jan","Feb","Mar","Apr","May","Jun","Jul","Aug"," Sep","Oct","Nov","Dec");
Although I filtered reception field by month to 1st quarter it shows empty months like Apr,May Jun etc.
View Replies
ADVERTISEMENT
Jul 27, 2013
problem when I am trying to use Form to filter data from a cross tab query though I have already defined the parameters. The SQL is as under :
//Code start
PARAMETERS [FORM]![START_MONTH] DateTime, [FORM]![END_MONTH] DateTime;
TRANSFORM Round(Sum(CLng([A_GAS_m3]+[NA_GAS_m3])/1000000),3) AS GAS_MMSCM
SELECT maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
FROM maindata RIGHT JOIN PRODUCTION ON maindata.field_block = PRODUCTION.FIELD_BLOCK
WHERE (((maindata.field_block)<>"Panna" And (maindata.field_block)<>"Mukta" And (maindata.field_block)<>"CB-ONN-2000/2(NSA)" And (maindata.field_block)<>"CB-ONN-2000/2(BHEEMA)") AND ((PRODUCTION.MONTH) Between Format([FORM]![START_MONTH],"dd-mm-yyyy") And Format([FORM]![END_MONTH],"dd-mm-yyyy")))
GROUP BY maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
ORDER BY maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
PIVOT PRODUCTION.ACTIVITY;
//Code End
When I save it prompts for the Start and End Month and When I run the query it pops up the form twice...
View 1 Replies
View Related
Sep 17, 2013
I am trying to make a crosstab query to filter my records from my table.
Here is the scenario.
I want to make a query that will return me my Rep ID, Rep Name, his Bonus and his GV-Q (another value) based on every month.
Now I make a crosstab query and here is the syntax.
Code:
TRANSFORM First([TBL Qualification Data India].[Bonus Rank]) AS [FirstOfBonus Rank]
SELECT [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
FROM [TBL Qualification Data India]
GROUP BY [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
PIVOT [TBL Qualification Data India].Period;
This resulted in a column for Rep Number, one column for Rep Name and columns for all the period of Bonus I am going to have., so there are basically 9 columns for this till this month for each month and bonus value shows as values for all these month (period) columns.
Now in this same syntax, I want to have my Rep GV-Q value as well as his bonus to show in the same query, I read and came to know that it's not possible to directly have two values or two column headings in a crosstab query, I must have to make a new crosstab query and then use a normal select query to display records from these two crosstab queries, so I went ahead and made a new similar but with one value field changed crosstab query and here is the syntax for that.
Code:
TRANSFORM First([TBL Qualification Data India].[GV-Q]) AS [FirstOfGV-Q]
SELECT [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
FROM [TBL Qualification Data India]
GROUP BY [TBL Qualification Data India].[Rep #], [TBL Qualification Data India].[Rep Name]
PIVOT [TBL Qualification Data India].Period;
Now after this how to make a select query to show the data from these two queries.
I can make a normal query based on these two crosstab queries and manually add all fields and then I would have my result but then after every month I have to manually enter these two extra month details from both crosstab queries to my final query and that's not what I want.
Is there any method to do this by gathering data from these two queries into one and achieve the result I want or if there is any other approach to tackle this.
To explain my database and my need for output, I am attaching few pics to make things easier if I made some mistakes in explaining my problem. It's included in attached zip since I am not able to post images or links.
View 5 Replies
View Related
Oct 18, 2007
I have a query that filters two tables. 1) Status 2) Name
The status is 1,2,3,4,5 from an option group on my form.
In the query I have <>3 for the status, whereby I only want records that are status 1,2,3,& 5.
When I run the query with all names it works perfectly, however I am trying to run the query for only a select few names versus all of them.
The problem is I do not know how to select only a few names versus all of the names and make it work. When I try to add names i.e "Doe, John" my Status pulls all records including option 3.
Can anyone help? I do not even know where to start seaching.
Thanks.
Fen How
View 1 Replies
View Related
Jun 19, 2014
I have a crosstab query to summarise the counted string values from another query: E.g.;
TRANSFORM Count(Table1.Viable) AS CountOfViable
SELECT QryTable01.productName
FROM QryTable01
GROUP BY QryTable01.productName
PIVOT Table1.Viable;
As there are some null values returned (ie blank cell in the pivot table)
I used the Nz function to make this zero but when the query results are used in a report I want to add the rows to get row totals... but the result is as if they were string values;
So if I add a text box in the report with = [viable] + [Not viable]
t
Then the report row with the values:
Viable Not viable
14 12
displays as 1412
So how do I add the values in the rows???
View 1 Replies
View Related
Sep 17, 2014
Below is the SQL view of a Crosstab Query I am running. However I am lost at how to keep it from creating a serpate row for the same data on the column. For instance in the row data if I have an ATM batch come in for 1111 on 9/16 and then one come in for 1111 on 9/17 instead of keeping it on the same row it drops 9/17 down to the next row. Is there a way to keep the data on the same row?
Code:
PARAMETERS [forms]![frmReporting]![txtDatefrom] DateTime, [forms]![frmReporting]![txtDateTo] DateTime;
TRANSFORM Sum(Query1.CountOfATM) AS SumOfCountOfATM
SELECT Query1.ATM, Query1.Store, Query1.Type, Sum(Query1.CountOfATM) AS [Total Of CountOfATM]
FROM Query1
WHERE (((Query1.[Date Stamp])>=[forms]![frmReporting]![txtDateFrom] And (Query1.[Date Stamp])<=[forms]![frmReporting]![txtDateTo])) OR (((Query1.[Date Stamp]) Is Null))
GROUP BY Query1.ATM, Query1.Store, Query1.Type, Query1.[Date Stamp], Query1.[Date Stamp]
PIVOT Format([Date Stamp],"Short Date");
View 4 Replies
View Related
Apr 16, 2013
I have the table "tblProductionForecast" with the following fields:
ProductionForecastProductId
ProductionForecastMonth
ProductionForecastQuantity
I want to show this in a report, similar to an spreadsheet, with:
ProductionForecastProductId = Rows
ProductionForecastMonth = Columns
ProductionForecastQuantity = Data
I thought of using a crosstab query like this:
Code:
TRANSFORM avg(tblProductionForecast.[ProductionForecastQuantity]) AS AvgOfProductionForecastQuantity
SELECT tblProductionForecast.[ProductionForecastProductId]
FROM tblProductionForecast
GROUP BY tblProductionForecast.[ProductionForecastProductId]
PIVOT tblProductionForecast.[ProductionForecastMonth];
but I don't want the average of ProductionForecastQuantity. I want the actual value!
Is a crosstab query the wrong method to use?
If no, how do I show the actual value of ProductionForecastQuantity
If yes, how should I create the report?
View 5 Replies
View Related
Nov 12, 2013
I have a crosstab query that I would like to sum data across. Each row is a seperate experimental product, and each column is a test phase that each product goes through. The data is the number of days each product was in each test phase. What I need is the sum total of days that all products were in all phases. Think of this table as a single item, and each row is a slightly different version of the item to test. So what I need is essentially how many days this item has been in testing across all variations.
View 1 Replies
View Related
Aug 12, 2014
I have a database which among other things records how jobs are received i.e.: Telephone, Email, Mail, Facsimile or Web.For each client I want to identify the percentages of each method of receipt against the total of jobs received and during different time periods.I have created a make table query for all jobs received between variable dates for a client entry of the name of the client and the start and finish dates are required to run the query.
I have a crosstab query set up to count each method of receipt and a final query to work out the percentages using the total from the crosstab query fields divided by the total of all methods.I have a macro set up to replace the table with new data when I want the stats for a different client between new dates, therefore the different methods of receipt may vary for the less active clients i.e.: they may only have telephone and email .
My problem is if I choose a client where we have not received a job by a particular method (say web or facsimile), the last query working out the percentages has fixed names to cover each method but naturally produces an error when it cannot find a corresponding method of receipt. I have experimented with NZ() without success.My question is can I either have preset standard names of the column field in a crosstab query? Alternatively in the query calculating the percentages, can I include code to ignore a non-existent field in the crosstab query.
View 9 Replies
View Related
Feb 26, 2015
I have a created a crosstab query which gives me the results I need, but I want to sort the row headings differently. These are not numbers, but machine sizes which range from 4 Metre to 20 Metre. Currently, the crosstab gives me:
10 Metre
12 Metre
14 Metre
17 Metre
20 Metre
3 Metre
4 Metre
5 Metre etc
But I need to show it as:
3 Metre
4 Metre
5 Metre
10 Metre
12 Metre
14 Metre
17 Metre etc.
The field is short text data type and data comes from an ODBC linked table to SQL server table, and I am using Access 2013.
View 4 Replies
View Related
Apr 23, 2014
I've setup some crosstab queries with good success and set column headings that appear with blank spaces when there's no data as expected, but I have 1 report that is formatted with set row headings (its a specifically formatted report that i need to produce, that i can't just change).So I need to basically do the same but with the row headings set (I have got the crosstab working, just not showing the rows with no data as yet).
View 3 Replies
View Related
Jun 23, 2014
I want to create a cosstab query with dates for the next 12 months accross the top as columns and employee names down the side as rows. I then want to populate with data showing what each person is programed to do under the dates. For instance trainer 1 is delivering training from the 23/06-30/06 then designing a course from 02/07-10/07. that type of thing.
I could represent an activity using a colour i.e. yellow for delivery, green for design etc.
Also do I need to create a table with all the dates? Is there a quick way of doing this?
View 7 Replies
View Related
Nov 4, 2013
I have generated a table using a crosstab query and it gives the information as below
12/10 12/11 12/12 13/01
Part 1 1 2
Part 2 4 4 4
Part 3 5
So basically part, qty used, year/month used - it works fine up to this point.
Now I want to either add more columns to the crosstab query to count number of times Part 1 was used in last 12 months & 24-13 months
Or
Create another query to do this.
But I want the count function to start counting from current month to last 12 months and from month 13 to month 24 (in another column).
The problem I am having is that this query will run every month and I don't want to update the column headers (in query property sheet) instead I want query to pick this up automatically.
I use the design view to generate queries.
View 1 Replies
View Related
Apr 12, 2013
I have created a cross tab query that contains a row heading for Entity and Total Cases. I would like to have a percentage of the Case Total for Each Category as well as the count for each category. It works fine for just the counts and here is the sql behind it:
TRANSFORM Count(CASEDATA.CASESTATUS) AS CountOfCASESTATUS
SELECT IUIDCODES.CODEDESCRIPTION, Count(CASEDATA.CASETYPECODE) AS CountOfCASETYPECODE
FROM (CASEDATA INNER JOIN CASESTATUSCODES ON CASEDATA.CASESTATUS = CASESTATUSCODES.CODEID) INNER JOIN IUIDCODES ON CASEDATA.IUID = IUIDCODES.CODEID
WHERE (((CASEDATA.CASETYPECODE)=63) AND ((CASEDATA.FYSTATUS)=6 Or (CASEDATA.FYSTATUS)=7 Or (CASEDATA.FYSTATUS)=8))
GROUP BY IUIDCODES.CODEDESCRIPTION
PIVOT CASESTATUSCODES.CODEDESCRIPTION;
View 2 Replies
View Related
Oct 9, 2014
I have created a crosstab query that I will use in a subform and a subreport. However, Access won't let me add the fields to the query that I need to link the subform to the form. Is it possible to add fields to a crosstab query?
View 6 Replies
View Related
Feb 12, 2014
This crosstab query has the employee's name as a row heading, each calendar day as a column heading and the sum of Hours worked as the value.
TRANSFORM Sum(tbl_Tracker.Hours) AS SumOfHours
SELECT tbl_Employee_Master.Full_Name
FROM tbl_Employee_Master INNER JOIN tbl_Tracker ON tbl_Employee_Master.user_no = tbl_Tracker.User_Id
GROUP BY tbl_Employee_Master.Full_Name
ORDER BY tbl_Employee_Master.Full_Name, tbl_Tracker.TheDate
PIVOT tbl_Tracker.TheDate;
It returns data that looks like this:
FullName 2/3/2014 2/4/2013 2/5/2014
John Smith 8 0 8
Joe Jones 0 8 0
Cathy Wise 8 8 8
I want the data returned to look like this:
2/3/2014 2/4/2014 2/5/2014
John Smith Joe Jones John Smith
Cathy Wise Cathy Wise Cathy Wise
The hours worked are not important - only the names associated with the dates.
View 2 Replies
View Related
Oct 5, 2013
I have a table that has three columns: Nationality, Gender, and Date. First I had the problem of grouping the Nationality column by Gender. That i resolved by creating a crosstab query. Now, I want to put a criteria on Date field so that when the query is run it will ask for the date input and will only show the Nationality and Gender result for specific dates. But when I write something in Criteria field it shows an error saying: "The Microsoft Access database engine does not recognize "[Registration Date]" as a valid field name or expression"..
View 3 Replies
View Related
Jan 8, 2015
I have a crosstab query which i would like to append to my table..can't change it to a append query...it changes the structure.
View 1 Replies
View Related
Dec 30, 2013
When I run this query
TRANSFORM Sum([rpt LEAD TYPE SUCCESS RATE2].rec_cnt) AS SumOfrec_cnt
SELECT [rpt LEAD TYPE SUCCESS RATE2].Internal_Rep, [rpt LEAD TYPE SUCCESS RATE2].Lead, [rpt LEAD TYPE SUCCESS RATE2].Start_Date, [rpt LEAD TYPE SUCCESS RATE2].End_Date
FROM [rpt LEAD TYPE SUCCESS RATE2]
GROUP BY [rpt LEAD TYPE SUCCESS RATE2].Internal_Rep, [rpt LEAD TYPE SUCCESS RATE2].Lead, [rpt LEAD TYPE SUCCESS RATE2].Start_Date, [rpt LEAD TYPE SUCCESS RATE2].End_Date
PIVOT [rpt LEAD TYPE SUCCESS RATE2].Results;
I get valid results.
When I run the form it prompts me 3 times for each start date and end date. Then I get the following error :The Microsoft Access database engine does not recognize '' as a valid field name or expression.
I am running MS Access 2010 on a Window 7 pc.
View 10 Replies
View Related
Sep 19, 2013
I have been tasked to create a DB for my unit. I have created a few DB, but I am a novice at best. I need a crosstab Query to count the number of records for each FY. The Army's FY is from Oct -Sep. I only need to show the the total number of record for the previous FY in a Report and on a form.
View 7 Replies
View Related
Aug 4, 2015
I have a very basic query with the following calculated field in it:
ProjRevNRC: IIf([ProjRevDate]>=DateSerial(Year(Date()),Month(Date()),1),[CurrentNRC]*[Rev Flow Through],0)
I went into the properties if that field inside the query design and changed it to Standard with 0 decimal places and it worked fine.
But when I based a crosstab query off the query that contained the above calculated field, I cannot seem to get the numbers to format correctly. 1231313.424 is shown instead 1,231,313 and I don't have a line in the Properties window to even change the decimal places. It doesn't recognize when I change the format to Standard. I have tried using Round([ProjRevNRC]) which gets rid of the decimal places as desired but does not show commas.
I'm sure it's a simple part of the Round expression that I am missing but nothing has worked.
View 4 Replies
View Related
Jul 29, 2013
I have a cross tab query that takes input from the user. The code is as under:
PARAMETERS [START_MONTH] DateTime, [END_MONTH] DateTime;
TRANSFORM Round(Sum(([A_GAS_m3]+[NA_GAS_m3])/1000000),3) AS GAS_MMSCM
SELECT maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
FROM maindata RIGHT JOIN PRODUCTION ON maindata.field_block=PRODUCTION.FIELD_BLOCK
WHERE ((PRODUCTION.MONTH) Between Format([START_MONTH],"dd-mm-yyyy") And Format([END_MONTH],"dd-mm-yyyy")))
GROUP BY maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
ORDER BY maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
PIVOT PRODUCTION.ACTIVITY;
I am facing 3 problems with the above code:
1. Access prompts to enter the start month and end month even when I click the save button.
2. When I run the query it prompts to enter the start month and end month twice.
3. I have generated a report based on the above query. When I run the report it keeps on prompting for start month and end month and does not give the final result.
Is it a common problem with cross tab queries?
View 5 Replies
View Related
Jul 1, 2014
This is my expression to format crosstab query by month
Expr1: Format([Recharge_Date];Month([Recharge_Date]))
but i can't make it with month and year....
View 2 Replies
View Related
Apr 11, 2014
I have a table of data going back to 2007 that needs to be looked at on a monthly/quarterly/annual basis. I am able to filter the data when running a normal query by using
Between [Start Date] and [End Date]
in the Criteria section of the Date field. I now need to apply this same idea to a crosstab query. My current set up is:
[Gender]- Group By / Row Heading
[Plan Type]- Group By / Column Heading
[Pmt Amt]- Sum / Value
[Date]- Where / Criteria = Between [Start Date] and [End Date]
I am getting an error message that says:"The Microsoft Office Access database engine does not recognize '[Start Date]' as a valid field name or expression."Am I setting something up incorrectly or is it impossible to use input prompts in a crosstab query like this?
View 1 Replies
View Related
May 26, 2015
I have a crosstab query. users need to run the query for any week of a year. It is always a YTD query. I have used this process on many select queries. Will a crosstab query not support this simple method? See attached screen shots.
View 2 Replies
View Related
Aug 27, 2011
Because I have more than 3 queries, it is really hard for me to manage. Therefore, I was thinking of having 3 crosstab queries to show in one single query. This way it will save my time from moving back and forth.
How to do that? Is it possible? If so, how?
View 5 Replies
View Related
