Queries :: Filtering Query With Text Box And Combo Boxes
Jul 23, 2015
I am creating a query that should filter records of events based on multiple fields. The filters should work with any combination of field criteria, but only two of the four field are working properly, as follows:
1. a text box for searching with event name (free text) - this is working;
2. a combo box to filter events by country name - this is working;
3. a combo box to filter events by event's keyword (category) - this is NOT working;
4. a combo box to filter events by year - this is NOT working
View Replies
ADVERTISEMENT
Dec 14, 2004
I have two questions.
I have a form with 2 combo boxes. The first pulls from a simple list. Once you make a choice, the second combo box is then filtered by the first. This works correct, except that once a choice is made in the first, the filter is locked. If you change the first combo box's value a second time it does not effect the second box. The query that I am using for the second combo box has two columns that pull the first 50 characters of a pair of memo fields. Quote: SELECT MSSS.SS_ID, Left([Application_Name],50) AS Expr1, Left([Description],50) AS Expr2, MSSS.Site_Code
FROM MSSS
WHERE (((MSSS.Site_Code)=[Forms]![Edit or Delete Requests]![Combo6])); These fields are then used to populate 2 text fields using an event procedure. Quote: Private Sub Combo10_AfterUpdate()
' Display Partial Application Name and Description based on choice
Me!txtApplication_Name = Me!Combo10.Column(1)
Me!txtDescription = Me!Combo10.Column(2)
End Sub This is working fine, but it starts the next problem.
I need to change the form to include the entire memo field into a text box. I was using the columns of the second combo box to fill them in. Since the combo box is limited to only 50 characters, i could only grab part of it. I am guessing there is a much better way to accomplish what I need, but I am too inexperienced with forms and vb to come up with it. Below are the fields I need from table MSSS
Business_Name
Application_Name
Description
Acronym
Level_1_Support
Level_2_Support
Escalation_process
Troubleshooting
Priority
Links
Modified
Disabled
Thanks in advance to any help!
View 5 Replies
View Related
Aug 13, 2013
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
View 11 Replies
View Related
Mar 24, 2014
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
View 2 Replies
View Related
Mar 25, 2013
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies
View Related
Aug 3, 2006
Need some help here....
I am designing a database to keep track of workers for a haunted house. I have a Roster table, a table of all the nights we are open, a table of Spots in the house, and a table to record who works what nights and what spot they are in. This table has a Room combo box and a Spot combo box. The Room combo has a Row Source of SELECT DISTINCT SpotsAll.Room FROM SpotsAll ORDER BY SpotsAll.Room; The Spot combo is then populated with VB code all the Spots that are in that room. That works fine. This is what I'm trying to accomplish: When a Spot is assigned to a Worker for that night, I want that spot to no longer be available in that list FOR THAT PARTICULAR NIGHT. So, lets say Joe Somebody works in Spot 1 (out of 4 lets say) of the Library Room, when we assign another person to the Library room, I don't want Spot 1 in the Spot list.
Can this be done with a query or VB code? If I'm not making sense, please let me know. I can also upload the Database I am creating so that you can play around with it and see what I mean.
(I have attached a word doc. that shows the table relationships.)
Thanks a lot ahead of time!!
ScrmingWhisprs
View 13 Replies
View Related
Jul 5, 2006
I have a form that we are creating to issue project numbers. We have about 80 different clients. I have set up a combo box for the client name, where we can choose the client from the drop down menu. We want the form to filter according to the client name that you choose. For example, if you pick Lawrence as the client name, the next combo box is the project name and I want it to only show the project names that have been assigned to Lawrence in the past. Can someone please help me on how to do this and if it is even possible at all? Thank you so much for your help!! I have been wrestling with this for about a week and a half now.
View 1 Replies
View Related
Jun 8, 2005
Anyone help
I have 2 combo boxes cd group and cd name when I select CD group the records only associated yo that cd name display with that group.
Anyway, also the name of songs form works too,. So then now when I go from record to record the records display right with the songs and not with the cd group and name when I select Mormon Tabernacle Chior and name God Bless Ammerica it disaplys for all the records any help.
Why is it the relationships.
Thanks,
Nike Van der stad
mikevds@optonline.net
View 2 Replies
View Related
Jul 26, 2006
Please help. My inability to achieve this is very frustrating.
I have a tabular form based on a query, which returns a large number of records. I need users to be able to filter the records to display data relating to what they have entered in a number of combo boxes.
For example I have fields showing Product ID, Manufacturer ID, Purchase Order number and due date. Each of these fields has a corresponding unbound combo box where users can select values that appear in the table. I need to be able to filter the form based on what is in these combo boxes. I.e. Filler for a product ID to show all purchase orders numbers and due dates relating to that product ID or filter for a manufacturer ID and due date to show all Product IDs and purchase orders relating to that a manufacturer and date.
Ideally this would be achieved by pressing a command button.
The query, table and combo boxes are all built and work fine but I am unable to get the filter to work, I am using Access 97 and am not very familiar with visual basic. Any help would be appreciated.
Thanks.
View 4 Replies
View Related
Feb 4, 2014
I have a sub form that I enter date range in 2 text box's txtstartdate and txtenddate this is filtering field "date raised" and I have combo box call cboclient this is filtering field "client name" this code is behind a command button after hitting the command button it open's the report and it show's all records with in the date range and with client name enter in cboclient works great. problem is I have now added another cboclient2 to filter client name twice so now I enter a date range in txtstartdate and txtenddate put a client name in cboclient and a client name in cbocleint2 hit command button it open's the report but doesn't apply the date range to cboclient2 it just show's all records with that client name
Code:
Private Sub cmdPreview_Click()
'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it
Dim strReport As String
Dim strDateField As String
Dim strWhere As String
Dim lngView As Long
[code]...
View 14 Replies
View Related
Sep 19, 2013
I'm attempting to filter my form with combo boxes. I've added the below code, but the if statement that checks if one of the combo boxes is null won't work. If the combo box is null or "", it's supposed to assign a wildcard to the variable. But it doesn't pass the test and goes straight to the Else statement. I've highlighted the if statement that keeps failing in red.
Code:
Private Sub btn_Search_Click()
'create variables to store the combo box values
Dim str_Country As String
Dim str_Vendor As String
Dim str_Survey As String
[Code] ....
View 4 Replies
View Related
Mar 24, 2014
I am using master/child form for data entry for packings and the details for this packings (i.e. the products inside a packing is entered in subform and packing master is entered in main form ).
In the detail subform i use a productId field which has look up from 1000 products , so i want to filter that particular combo box based on different types from product master ( from which it choses the products).
How many ways are there to filter that combo box based on different types ( which i have in product master as type,design,material etc).One way of which is combo boxes on main form.
[URL]
View 14 Replies
View Related
Jan 1, 2014
I have three comboboxes and I want to have the first one filter the second one and the filtered second one filter the third one.
Filtering the first one on the second one works, but when I whant to add a third one to it, it just shows blank spaces on the third one.
What I did to the first and the second combobox :
1: I pressed the second combobox.
2: Went to rowsource.
3: filled criteria in on the value i whant to connect the first combox to the second combobox ( [Forms]![Thetableimin].[1stcombobox].
4. requery the second combobox in programcode on the first combobox.
What I did to the second and the third combobox:
1: I pressed the third combobox.
2: Went to rowsource.
3: filled criteria in on the value i whant to connect the second combobox to the third combobox ( [Forms]![Thetableimin].[2ndcombobox]
4. requery the third combobox in programcode on the second combobox.
How do I make a third combobox that uses the filtered values of the second combobox to filter the third combobox.
View 7 Replies
View Related
Jul 1, 2014
I thought I was in the home stretch of my project, everything worked great when I was messing with 200 records. Now that I'm messing with 2000+ records, things are very slow. So a search form redesign!
I have a form (frmSearch) that has a subform (frmSubSearch) embedded in it. The frmSubSearch is a datasheet only that is just pulling its info from a query (qrySearch). qrySearch has about 8 columns of data in it.
On the main form I have a combo box that is feeding its list from the qrySearch using a SELECT DISTINCT statement. So a user selects an item in the combo box and my After_Update fires. This sets a filter on frmSubSearch. I have three of these combo boxes that can add to the filter and they work great so far.
But I want to have the combo boxes filter themselves based on whats left on frmSubSearch. So if a user selects something in the 2nd combo box, the sub form filters and updates, but then I want the other two combo boxes to only have valid selections, and not something selectable that would wind up giving me a blank sub form result.
I have tried using .Requery in various ways, but its not working. I have also been looking into the idea of Cascading Comboboxes, but these don't seem to quite fit what I'm trying to do.
View 9 Replies
View Related
May 30, 2013
I have these 3 combo boxes filtering results into a subform.
Code:
Private Sub Combo5_AfterUpdate()
If Len(Nz(Combo5, "")) > 0 Then
FindRFQsubform.Form.Filter = "[RFQ Title] = '" & Combo5 & "'"
FindRFQsubform.Form.FilterOn = True
[code]...
View 1 Replies
View Related
Dec 5, 2013
i have a calender of which show's records on date box's i m having a issue when i double click on a datebox it opens a form call update which is filtered on open to show only records for this date but on date boxs on 1st to the 11th i have add the code to do this but when the form open's the form is blank and shows no records but the code works fine for 12th to 31st which i can't understand why? as im using the same code that does dateboxs 12th to 31st on datebox 1st to 11th but doesnt work i'm pulling my hair out on this one !!
View 3 Replies
View Related
Jul 25, 2013
I'm having issues with this one.
Table name is CompDates
Subform is ViewByMarket
Start date is Text13 and End Date is Text15.
I want it to filter out any matches between the 7 fields. Here is my code:
Code:
Private Sub Command19_Click()
Dim strFilter As Variant, _
strSDate As String, _
strEDate As String
'check Text13
Text13.SetFocus 'set focus to Text13 to be checked
[code].....
It will only filter for Build Date 1 and not for any of the other fields.
View 1 Replies
View Related
Jan 25, 2015
I have strange issue when creating auto populated text boxes which displays rows from combo boxes.
In one database auto populates works with simple text box Control Source edit "=[ComboName].[Column](NumberOfColumn)".
Somehow same method doesn't wotk in different database: here one time I have to insert VBA code at On change Event:
Me.TextBoxName = Me.ComboName.Column(NumberOfColumn)
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
View 3 Replies
View Related
Jul 29, 2015
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies
View Related
Mar 14, 2014
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
View 4 Replies
View Related
May 17, 2005
Aaaargh! It's a couple of years since I got my hands dirty in Access and I seem to have forgotten more than I thought! :(
I have a simple database which includes tables STOPS (stopID, stop name, routeID, Cost band), JOURNEY(CustID, routeID, stopID), and ROUTES (routeID, Route name, Bus co).
I have a main form with the customer number on linking to a sub-form on which the user will select the route from a combo box and then the stop from a combo box. All works fine but I want to filter the stop combo box to show only stops on the route already chosen.
I've done similar before but I have tried all sorts and failed to get anything to work. Any help appreciated.
View 3 Replies
View Related
Feb 24, 2005
Another quick request:
What would the code be for a button which clears the contents of a text box or a combo box on a form?
Many thanks,
Paul.
View 2 Replies
View Related
Nov 20, 2013
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
View 5 Replies
View Related
Jul 10, 2013
Ok so im working in MS Access 2007.
I want to create a query based on 3 combo boxes but have it so that if the field in the second or third combo box is not populated the query still runs.
Right now i have the Criteria set for the three columns that i wish to sort by as seen below.
Column 1
Criteria: [Forms]![Entity Selection Form]![areabox2]
Column 2
Criteria: [Forms]![Entity Selection Form]![devbox2]
Column 3
Criteria: [Forms]![Entity Selection Form]![entitybox2]
This gives me the correct query result but im forced to make a selection from each combo box. Is there a way to progamme it so that if I only make a selection from the first combobox and leave the others blank i can still get results in a query?
View 2 Replies
View Related
Nov 27, 2013
I have a form with cascading combo boxes pulling from a table. They work perfectly, no worries. My problem now is if I do not enter information in every combo box (i.e. only two out of four combo boxes), how can I still run the query and get the appropriate information?
For example (these are my combo box titles in order):
Product
Type
Customer
Contract #
I don't want to necessarily look by Contract # all the time, but sometimes just by the general Product and Type to get a larger view. How do I set up expressions/criteria in my query to accurately produce that information? Right now it just produces a blank query table if I don't fill out all the boxes.
I've tried a couple of expressions with "isnull" criteria, but I must be doing it incorrectly.
View 2 Replies
View Related
Aug 7, 2015
I have a Inventory DB and i want to integrate scanning. So far i have a table called StockInfo, this table holds information about bar codes (device type, make, model). I have a form called Scan_Barcode, on this form I want to be able to scan a bar code into a text box (text0) and use a afterupdate and requery function to display the results onto a form called EnterInventory.
Not only just the results but I want certain columns from the query to display in certain text boxes on this form. I have a query called FindProduct. that filters the criteria by whats entered on the Scan_Barcode text box (text0). So when i scan a certain bar code i can get the query to display certain product information for the bar code. I just cant get the results onto the HarwareStock form.
View 8 Replies
View Related
