Queries :: Find Specific Data In A Table To Produce A Report
May 14, 2013
I have a table that is linked into access 2003. This table is updated by personnel in another location and I have to run a weekly report on engines that are below a certain performance level.
The column heading is MGT Margin and I have to list all of the engines that are below 20 degrees.
Can I run a query that looks at this table and produces a report of all the engines that are below 20 degrees?
I currently have to cut and paste each engine from the updated spread sheet every week onto a separate spread sheet and import that into access. If a query can be used to do what I am after I can use similar principles in other reports I have to run.
View Replies
ADVERTISEMENT
Jul 31, 2013
I am looking to call two different queries from report wizard to produce report. Getting error message what to do in this situation as both queries are important as i have to pick all records from query A and just one record from query B any other option to get this in report.
View 4 Replies
View Related
Nov 7, 2013
I have an "order details" table that needs to populate a field called "Voucher" with data from another table called "codes". The "codes" table also has a true/false field called "allocated" because once allocated the code cannot be re-used.
I am trying to work out how to automatically allocate the next unallocated code in the "codes" table to each record in the "order details" table when that order details record has a DiscountID of "92".
Order Details Table Fields and conditions/criteria:
ID - primary key
DiscountID - only when the DiscountID = 92
Voucher - only populated when Discount ID = 92
Codes table Fields and conditions/criteria:
ID - primary key
code = text field with a code like "einstein01", "einstein02"
Allocated = False
Is there a way to put the next available code into the order details record then mark that code as allocated in the codes table. Then, move on to the next order details record that has a discountID = 92, input the next unallocated code and mark that code etc. etc.
Ideally, I would like to do this to happen via an event when the Order forms button "Close" is clicked.
View 1 Replies
View Related
Aug 6, 2014
I have a table where csv files get imported to on a daily basis. The key fields I am working with are a supply number and date. The problem I have is that sometimes the csv file will contain information that is correcting/updating information held in the table. This is creating duplicated records.I need to either create a query to find records that have the same supply number and date or find a way of overwriting the records in the table with the new data.
View 2 Replies
View Related
Jan 16, 2015
I am developing a database for incoming inspection. I have set up two tables, one with spec callouts per product and the other table contains fields where I want the specs from the tblSpec table to be Append into the tblMeasurement table. Now, within the tblMeasurement table (where I am trying to append specs from the tblSpecs table into), I also have additional fields for actual measurements from received goods.
My plan is as I go through and select the Vendor, it populates the associated products to that vendor (no problem there). When I want to select the product, I would like the specs from the tblSpecs to dumped into the tblmeasurement table that correlates to that product on the form.
How can I have this automatically append after selecting the product? I am not sure if I have my relationships set up correctly or not, but I cannot see to append when I am trying to execute this function while in Query view.
I have the db attached in a zipped format.
View 9 Replies
View Related
Sep 16, 2013
Is it possible to have a query that uses criteria to pull data from a specific table?
For example: IIf([Result]'"Negative",(tblNegative goes here),IIf([Result]="Positive",(tblPositive goes here].
The tables are just text, but the query would be too long if it was used.
View 2 Replies
View Related
Jul 14, 2013
Query4 is the result from left joining of Query3 and Query1 and I would like to delete some of the null data in query 4
while I execute the following code
DELETE DISTINCTROW Query4.*, [working hour] AS Expr1
FROM Query4
WHERE (((query4.[working hour])=0));
I get the warning of "Could not delete from specific table"
View 9 Replies
View Related
May 5, 2013
I am working on a school project called employee skills. I have a table of skills, each has a check box, which if checked is true. I am trying to write a query that will find who has a specific skill.
View 6 Replies
View Related
Mar 18, 2015
I need to find whether a memo field contains a specific word. I know how to find whether it contains a specific string.
Let's say I am looking for the word "run." I would not want a positive result when searching "I don't like gerunds," but I WOULD want to find the records with "I know how to 'run' a search."
So I am looking for WORDS, not matching strings.
I am perfectly willing to use a user-defined function, to put involved processing into the query, such as
Code:
...
WHERE FieldHasWord("run", memoField) = True
AND ...
View 3 Replies
View Related
Jun 17, 2014
My computer has been updated to 2010 whilst I've been off sick (was 2003 before my accident).
I've created a main table, for devises across the company, and a combo box/selection box based on another table which holds a list of all the "Responsible" employee's aswell as another combo box/selection box for the device location.
So the person entering the information, can enter all the information for a device (torq wrench, socket set etc), who is responsible for it and which department they belong to (where to find the device).
Which all works fine
However, I'd like to create 2 queries, one to enable the user to run a report of all device's allocated with an employee or to be able to run a query for all device's stored in a particular department.
But I have been unable to set the correct query criteria, to enable to query user to be able to selection from a drop down list, which responsible person or location to pull back the correct list.
I was getting an error asking me to set the parenthesis, I have now deleted criteria for both queries, as even if I put [Enter] and type a Responsible person's name exactly as its held on the table, the report comes back blank.
View 1 Replies
View Related
Jul 8, 2015
how to read a specific line in a CSV file (using VBA), to see if the phrase "There are no records available." is present.
If it is present, then I'm going to do a debug.print stating that there are no records to load - and then the script will move on to the next file. If the phrase isn't present, then I'm going to upload the file to Access, parse the information, and then upload it to a CRM. (I already have the latter portion of the code up and running....I just need to account for the first part, where I can determine if the file has data or not).
The structure of the file never changes. The first row is composed of eight column headers (Post Date, Card Number, Card Type, Auth Date, Batch Date, Reference Number, Reason, Amount) and (if) the phrase "There are no records available." is present, it will show up on the second row, in the first column (under Post Date).
View 3 Replies
View Related
Sep 13, 2005
I'm trying to print a report that displays only records from a particular site.
This is the code I've used:
Private Sub cmdReport_Click()
On Error GoTo Err_cmdReport_Click
Dim stDocName, strSiteName, stLinkCriteria As String
stDocName = "rptExtChkSht"
strSiteName = Me!cmbSiteName
stLinkCriteria = "[SiteName]=" & "'" & strSiteName & "'"
DoCmd.OpenReport stDocName, acPreview, , stLinkCriteria
Exit_cmdReport_Click:
Exit Sub
Err_cmdReport_Click:
MsgBox Err.Description
Resume Exit_cmdReport_Click
End Sub
I'm wondering whether it won't produce only these records because of the design of my report (attached), with the Site Name under the SiteID Header...?? I wouldn't have thought it would matter, but...
Any help greatly appreciated.
View 1 Replies
View Related
Nov 17, 2004
My aim is to produce a report - using a drop down list (of customers from customer table) so that users can look at customer history.
I have created a form with a drop down list of customers - from customers table. I have used this to filter the results for a query on the orders table (gives me a history of that customer). All this works perfectly. I get all the transactions for that customer.
My question - is there a way I can create the same result but in a report format instead of the datasheet format. I.e the user will be given the data in report format when they select the customer from the drop down list.
View 3 Replies
View Related
Mar 25, 2015
I have produced a query, which counts the number of records fulfilling each set of criteria, but I can't now convert that into the matrix presentation.
I have a attached a copy of what is produced currently through Excel.
Basically each count on the query represents one of the boxes within the matrix. For example if the record Impact is 1, and the Likelihood is 1, then it would be counted within the bottom left hand box.
View 6 Replies
View Related
Mar 9, 2013
What I would like to know is this: I have produced a basic members table containing individual's details etc. How do I now produce an individual report for selected members (single page per member), in which I can determine which of the table details are included?
View 2 Replies
View Related
Feb 18, 2013
I have a database where we regulary import excel data to generated from a form sent to our clients. The excel data that we import normally holds around 10 to 40 records at a time.
The current process I use to do this is to run a macro that creates a new table (tblImportForm), and then run an append query to append those records to our existing main table (tblJobDetails). I should also mention that the macro first deletes the existing tblImportForm before creating a new one with the same name with the new data.I have used this method rather than appending the data straight into the existing tblJobDetails as I found I came into more problems with generating IDs etc.
What I want to do is have a report come up after the data has been imported/appended, that lists the new data imported with the new record IDs generated in the main table tblJobDetails. It would be easy to do this is if I only needed the data or could use the IDs in the first table I import to, but the idea of the report is to give the user the new IDs (PrimeKeys) from the second table that the data is appended to.I could maybe do a count of records in tblImportForm and then produce a report using a query from tblJobDetails that pulls that number (the count) of data from the last record backwards? But I don't know exactly how to do this.
View 14 Replies
View Related
Apr 2, 2013
I am trying to create a form to enter data into a table that I ultimately will create a report from. I have created a blank table with the columns I need. I created an append query to add the new records and an update query and a macro to run them on click of a button. It all runs but it doesn't append anything to the table. What am I doing wrong?
View 6 Replies
View Related
Dec 17, 2014
I create a query to bring data from a table and then print a report that display this data
I put a criteria on the cities field to filter this query. It will take the name of the city from a txtbox in a specific form
Everything is ok, but when i want to print all records with any city without filtering so the query. How can i do it
View 5 Replies
View Related
Jun 13, 2013
I'm trying to produce a report which uses a static deisgn and does not change. For example,I require in the detail of the report a table say 3 * 8 ....and in the report I need the data to fill each one of these cells. However I may not have 8 records , therefore I need the remaing columns/cells empty - the design of 3 * 8 must not change... at the moment I have a dynamic design so if i have 3 records I have 3 *3 table leaving a massive gap on the report.
View 2 Replies
View Related
May 24, 2013
I am very new to access, any way that I can have a popup box appear when I ask to produce a report and I can type in a parameter of my choice and it will produce a report based around that parameter?
I have a table that is directly linked to an excel spread sheet that is updated each week external to the database. I have to produce reports on the data contained in that table.
I have already produced reports that look for specific number and those reports are produced automatically.
I was wondering if there was some way I could open a form and type a number into a text box and it would produce a report around that number. e.g. "list all engines below X margin" and I can type any number in representing X and a report would be produced.
View 9 Replies
View Related
May 17, 2013
I have an excel spread sheet that is linked into access 2003 via a table. This spread sheet is updated by personnel in another location and I have to run a weekly report on engines stored in that table that are below a certain performance level. The column heading is MGT Margin and I have to list all of the engines that are below 20 degrees. Can I run a query that looks at this table and produces a report of all the engines that are only below 20 degrees? I currently have to cut and paste each engine from the updated spread sheet every week onto a separate spread sheet and import that into access to run the report. Can a query be used to run the required report? I have attached a screen shot of the query that I am putting together to try and run this report.
View 5 Replies
View Related
Jul 30, 2013
I have a form which runs specific queries and opens a report using combo boxes, these work perfectly fine if I just try to run them in the form. I have put the form into a navigation form and if I try to run the same query I get parameter queries popping up instead of just running the query and opening the report.
View 2 Replies
View Related
Sep 17, 2013
We have a need to produce hex and ascii in the same results field.
The field with data will be bound to a 2D barcode (the square ones you see everywhere now). The format of the data is to look like this:
[)><RS>06<GS>xyz<RS><EOT>
The <RS>, <GS>, and <EOT> all need to be hex values as follows:
<RS> = Hex 1E, Decimal 30
<GS> = Hex 1D, Decimal 29
<EOT> = Hex 04, Decimal 04
When I run my Access query as follows:
BarCode: "[)>"&Hex(30)&"06"&Hex(29)&"xyz"&Hex(30)&""&Hex(04)& ""
It produces the following:
[)>1E061Dxyz1E04
So, it just converts it to ASCII; however, when I go to scan it, it actually reads that information also. I need the 1E, 1D, and 04 to actually be scanned as HEX for the validation to occur for our client.
Is it possible using an Access query to return these desired results? If not, I will have to look atother piece of software to produce the bar code labels.
View 6 Replies
View Related
Apr 16, 2015
I have been trying to get this to work for days and I cant get it to work correctly. I have a query that I need to search only for the records that have 12,22 and 24 so in the fields criteria I have been trying
Total: Where
Criteria: In (12,22,24)
and it works BUT it only works for the first record it finds then it seems to skip and continue to search for all records after that.
View 3 Replies
View Related
Aug 23, 2012
I am managing a tool room and one of my tasks is to update a chit board where people sign out their tools. I have managed to make a query to find New Employees and one to find Terminated Employees. I have also made a query to find the matching employees between these two queries.
My problem is that we employ both contractors and direct employees. When a contractor is hired on directly, their name shows up in both the New list and the Terminated list.What I want to do is have a separate query that shows contractors who went direct and not have these employees show up in the other 2 queries.
Both queries are unmatched query that compare the "Current Chit Board" table to the "Weekly Roster Check" table. The first query called "New Employees" displays the data from the "Weekly Roster Check" table where Employee Number from "Current Chit Board" Is Null. The second query called "Terminated Employees" is the exact oposite. The third query I have is called "Contract to Direct" compares the "New Employees" query to the "Terminated Employees" Query with a "fields from both tables are equal" join type.The problem is when I try to do an unmatched between either the New or Terminated Emplyees queries and the Contract to Direct query, I get a Circular Reference warning and it doesn't execute.
View 3 Replies
View Related
Feb 16, 2015
I have over 100 queries of weather data, for each month, and would like to display certain or filtered information for a selected month.
I have been playing around with a combo box to select a month from a given year, and was hoping that maybe an 'After Update' would do what I want. The problem I have is that I don't know how to do this, as the month picked and displayed in the combo box is variable , and so a sort of wildcard might do the job, if I knew how.
View 14 Replies
View Related