Queries :: Form Input Not Being Recognized By Query
Jul 10, 2013
I maintain a grade book application that uses many queries whose results are determined by "school year". Most of these are reports and I have a combo box on the Print form for that allows the user to select the school year. The criteria field of the several queries derived by school year is:
[Forms]![Main Navigation]![Print Form]![SchoolYear]
SchoolYear being the combo box control.
They work fine.
I have now added a function to export data to Excel. This is done in a VBA module and I am using a query to select data for the record set I use to write to Excel:
Set objRst = Application.CurrentDb.OpenRecordset(strQueryName)
When I hard code the school year in the query criteria field (i.e. "2012-2013") the process works fine, but if I revert the query to point to the print form field as above, I get an empty recordset.
The Excel export is executed from a control on the Print Form, so the form is open and the combo has data showing, just as it is when a report is run whose data is derived from a query.
When I execute the query from the VBA module, the query is not getting the school year selected on the Print form passed to it properly.
View Replies
ADVERTISEMENT
Apr 4, 2014
Access 2010. I have a query that I referenced it to a combo box in a form.
If I rename the combo box, save it, and then rename it back to the same name it works fine for a while and then stops working again.
View 5 Replies
View Related
Jul 15, 2014
I have a table which holds information on audits that have been carried out on staff member's actions. The 'Supervisor' field is populated via a combo box which is linked to a separate table (tblSupervisors).
I am now trying to build a query to allow me to extract all audits that have been carried out on a specific supervisor - rather than the criteria to be [Enter Supervisor Name] and allowing text entry, I thought it would be better to have form that pops up with a combo box that is used to select the supervisor (from tblSupervisors);
So far:
- Form "Supervisor_Select" is created, and has a combo box that looks up from tblSupervisors
- Macros as specified in the instructions are created (Open Dialog, Close Dialog, OK and Cancel)
- Query is done, all bar the criteria expression on the desired field.
- Module is created as described in the instructions, and is called "Supervisor_Select"
I have tried putting the following in the criteria;
[Forms]![Supervisor_Select]![cboSupervisor], however I think I am missing the bit where the query opens the "Supervisor_Select" form?? Will this only work from a button where the on click event runs the 'Open Dialog' macro and then runs the query?
View 4 Replies
View Related
Aug 18, 2015
I have a query that uses the input from a form as criteria, which is then used in a report. The form input is a drop down based on another table. This is a sales pipeline report, and the list is a list of sales people. The report works perfect for all sales people except one. When I run it for the one, I get the following error:
"This expression is is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables".
I DO NOT get the same error when running the query by itself - so assuming there is something in the report causing this. I do have some sum formulas in the report.
Again, no other salespersons selected cause this error -- so I am assuming there is something in the dataset for this person that is causing the error.
View 8 Replies
View Related
Jul 18, 2013
I have a query that I referenced it to a combo box in a form. In my form I created a combo box which has a list of VendorName and I want my query to opens a VendorName report based on whatever chooses in the combo box so that I use the combo box name in the criteria of the VendorName in my query. Somehow I get an error which says "The Microsoft Office Access database does not organize "[Forms]![Form1]![Vendor_Name]" as a valid field name or expression".
View 10 Replies
View Related
Jul 16, 2015
I have created a form and changed it's pop property to Yes and named the for to 'rtchange' however vba code editor is not recognizing this form in any code i try and reference it. it's giving an error variable not defined??
View 4 Replies
View Related
Dec 30, 2014
I would like to filter data from a table using a query (from an data input form). The objective is to output all results if input form field is empty and to output results higher or equal to the type in the field if field is not Null. The query code is as follows:
IIf(IsNull([Forms]![Form2]![MaxDiffInput]);[Maximum operational pressure (bar)];[Maximum operational pressure (bar)]>=[Forms]![Form2]![MaxDiffInput])
However, is not providing any result when the input field (MaxDiffInput) as a value.
View 5 Replies
View Related
Nov 11, 2014
The query below is supposed to accept some characters from the user and bring up a list of records satisfying the criteria. TelephoneAAA is a table with many columns. The query does not give any error message receives input from user runs quietly and does not give any result. I know that the table contains sufficient data. Probably I am missing something obvious but what.
Code:
RowSourceQy = " SELECT * from [TelephoneAAA] " & _
"WHERE (([TelephoneAAA].[SOYADI]) Like ((' * ')+ [Word] +(' * '))) OR " & _
"(([TelephoneAAA].[ADI]) Like ((' * ')+[Word]+(' * '))) OR " & _
"(([TelephoneAAA].[ADRES]) Like ((' * ')+[Word]+(' * ')))" & _
"ORDER BY [TelephoneAAA].[SOYADI], [TelephoneAAA].[ADI], [TelephoneAAA].[TEL];"
View 3 Replies
View Related
Feb 27, 2014
I am trying to use a combobox to select a value which then activates a query to return results.
Here is some details
I have to tables, one called "Customers" and the other called "Calls". These two tables are linked.
The customers is literally a list of customers with their contact details, but all I am in interested in is the "Company" Field.
The Calls table has a field called "End User" which looks up the company from the Customers Table.
What I am trying to do is create a search by Customer query, furthermore, I would like to do is to create a form with a drop down that looks up from Customers table, select the company and it returns all the records with that company...
What I have done
I have created a query that has the customer and calls tables included, I have dragged down the [Company] from customer table and then all the fields from the Calls table.
Then i created a blank form, inserted a combobox - Combo7, linked the box to the Customers table.
Back to the query, under the [Company] I have put into the criteria the following
Forms!sc!Combo7
Back to the form, selected the combo box, built a macro in the AfterUpdate, to run the query.
Tested this and it does not bring anything back, however if I put into the criteria Like [Please Enter Company Name], then typed the company name, it brings back all the records for that customer.
Am I missing something?, do I need to set the form control to the query, or even the combobox....
View 1 Replies
View Related
Jul 26, 2013
I have a customers list that i am always ading to .I need to run a query to see what individual customers have ordered .
I have the query that works great when i manually insert the customers Surname .but i want the combo to do this job .Is it possible ,or should i be doing something different .
View 1 Replies
View Related
Sep 10, 2013
I have a database table in which I'm trying to pull sales data and generate sales reports from. The problem I face is that the sales data is recorded into a table with this structure:
Year | Customer | Sales_Month_1 | Sales_Month_2 | Sales_Month_3
Rather than having a single field "Month" in which I could set criteria or prompt the user to select a month to derive sales data from, I need to write a query that through user input (or through some code within the query) the right field will be selected. An example of this would be generating a report for the 1st month of the year, obviously.
View 1 Replies
View Related
Jul 29, 2013
I have a cross tab query that takes input from the user. The code is as under:
PARAMETERS [START_MONTH] DateTime, [END_MONTH] DateTime;
TRANSFORM Round(Sum(([A_GAS_m3]+[NA_GAS_m3])/1000000),3) AS GAS_MMSCM
SELECT maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
FROM maindata RIGHT JOIN PRODUCTION ON maindata.field_block=PRODUCTION.FIELD_BLOCK
WHERE ((PRODUCTION.MONTH) Between Format([START_MONTH],"dd-mm-yyyy") And Format([END_MONTH],"dd-mm-yyyy")))
GROUP BY maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
ORDER BY maindata.on_off, maindata.state, maindata.OPERATOR, maindata.field_block
PIVOT PRODUCTION.ACTIVITY;
I am facing 3 problems with the above code:
1. Access prompts to enter the start month and end month even when I click the save button.
2. When I run the query it prompts to enter the start month and end month twice.
3. I have generated a report based on the above query. When I run the report it keeps on prompting for start month and end month and does not give the final result.
Is it a common problem with cross tab queries?
View 5 Replies
View Related
May 26, 2015
I have a crosstab query. users need to run the query for any week of a year. It is always a YTD query. I have used this process on many select queries. Will a crosstab query not support this simple method? See attached screen shots.
View 2 Replies
View Related
Sep 4, 2013
I got a field which is defnined based on a query result to ease the user input. However, some input are not in the query list, if I input data directly to the field, ACCESS complained I must choose item from the query result. Is there any way that the user can either select from query result or direct input to that single field?
View 1 Replies
View Related
Jan 30, 2005
Hello,
I need to create a field in an input form that is simply the concatenation of two other text fields. I have tried all sorts of things, but when I look at the data in the table that field.
I have a field called ID that I want to be created like this:
=Format([UniqueID],"00000") & "-" & [Mosque]
This works well in my output fields, but does not work the same way on the input form. It needs to be based on the currently input values from the current record. Anyone have any ideas?
Thanks in advance,
--Robert
View 3 Replies
View Related
Oct 10, 2006
Hi,
Is it possible to customise the input form for a query. At present I have to type in a start and end date manually, it would be far easier to use a popup calendar to select dates. I also have another query that requires you to type in a username, it would be preferential to have a drop down list to select a name from.
Are either of these things possible? or will I need to create a form that calls the query and passes the relevant data?
Many thanks
nit
View 2 Replies
View Related
Nov 4, 2005
Hi
This is simple im sure but i am a thicky
How do you allow a user to enter a value in a form; have access set that inputted value to a criteria in a query? Then ill have a button to run the query which i can do
thanks
thicky ste
View 1 Replies
View Related
Apr 27, 2006
Hey Folks,
I have a form that has two things on it:
A button to open a query
A list box with names in it
How do I get the query so that it will select all records where the name field matches the chosen name from the list box?
View 2 Replies
View Related
Jul 23, 2006
I am not a programmer and I don't know VBA/VB.
I am using this as a workaround to avoid VBA functions (since I don't know them).
I can't seem to find a simple? solution to this.
I have a query that does a radial search in decimal degrees. I have created an unbound form as a dialogue box that converts degrees-minutes-seconds to decimal degrees and displays the results in a calculated text box. What I want to do is have the query take the results in the calculated text box as its parameters (along with a third parameter- distance) without prompting the user. How do I get the query to take its results from the fields on the form? I have tried Like [Forms]![frmName]![SearchValue], but I can't seem to make it work.
View 2 Replies
View Related
Jun 2, 2006
I have a database that has several tables, each table has account numbers in
them. I also have queries set for each table to bring in desired
information. Is it possible to set up a form so the user can input an
account number and depending on which table the account number is in, that
query will run?
View 11 Replies
View Related
May 31, 2006
Based on information from a earlier thread.... I created a Union query that pulls information from multiple tables and fields.
SELECT AG_B_R1 as Num FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_B_R2 FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_B_R3 FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_B_R4 FROM dbo_ADC_Ag_B_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_m_R1 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_m_R2 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_m_R3 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_m_R4 FROM dbo_ADC_Ag_m_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_e_R1 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_e_R2 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll]
UNION ALL
SELECT AG_e_R3 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll]
UNION ALL SELECT AG_e_R4 FROM dbo_ADC_Ag_e_Res WHERE Rollnmbr=[roll];
And then I created another query to get the STDEV of the above query
SELECT StDev([Num]) AS StDev
FROM Q_cals_ag_bme_STDEV_Union;
The result will be on a subform on my main page. How do I get my form to input the [roll] automatically and requery the subform, showing my result.
Thanks
View 1 Replies
View Related
Jan 30, 2006
I have this select query.
SELECT DISTINCTROW L160.Date, Avg(L160.Zinc) AS [Avg Of Zinc], Min(L160.Zinc) AS [Min Of Zinc], Max(L160.Zinc) AS [Max Of Zinc], Count(L160.Zinc) AS [Count of Zinc]
FROM L160
GROUP BY L160.Date
HAVING (((L160.Date)=[Forms]![L-160quarterfrm].[Date]));
How do I build a form that would ask the user to input a range of dates for the criteria?
Thanks! :o)
View 1 Replies
View Related
Jan 26, 2007
I have a form set up and would like to have field update to a table when a policy number is input into the form. The fields are extracted from a linked table and are not viewed on the form but need to be written to a table to create a report. I'm confused on the sets to take to handle this. I think i need to use the "onchange" property and set up a macro that runs a query but how does the query write to the table?
View 1 Replies
View Related
Nov 3, 2005
Ok this might be basic stuff i'm a bit dumb
I have a query showing lots of records of equipment that is in different rooms. I would like to have a form where the user can bash in a room number and all the records from the query that have that room number in it pop up.
Please help the dumb
View 3 Replies
View Related
Sep 29, 2014
I am having trouble using a form as input for a query. The form uses multi select list boxes, with then intention being that if I select multiple fields then only records which include those fields will show (not only fields that contain those and no others).
I also have successfully worked up some keyword searches that I would like to have run on the same query. So say I want to search for two values in my list box, and it also needs to include keyword X... how would I run these all together, or is it possible?The form is "EVR Search Form"..The query is "EVR Query - Trending Filters" and I've also made a copy to test on, "Copy EVR Query - Trending Filters"
View 1 Replies
View Related
Jan 5, 2007
About three weeks ago, my work computer crash hardcore. Windows (2000 ver) had many corrupt files in the Windows Directory and in the Registry. Because of that, IT gave me an up to date computer running Widows XP. I am still running the same version of Office (2003 Pro).
I think because I have a new machine and a different platform, I am now have issues with trying to administer the permission rights. MS Access is not recognizing me as Admin and/or Creator of the db, therefore I am not able to modify permission rights....... :eek:
Does anyone know how make this db recognize that I am the Creator of it?
Thank you in advance for your help.:cool:
Kilch
View 4 Replies
View Related
