Queries :: Get Data From SQL Database And Append It To Certain Tables?

Oct 10, 2013

So I am pulling data from a SQL data base into access and appending it to certain tables. To do this I have 15ish append queries. Is there a way to have them run in a certain order with one command?

View Replies


ADVERTISEMENT

Tables :: 2 Similar Tables / One Takes Too Long To Append Data

Jul 19, 2014

I have being playing with ms access but I really don't know much about it or databases in general.I have created a very simple database to gather twitter following/followers data for research purposes.One table (table01) has a field for the "boss" user (=the user who I gather data for), another field for "client" (=bosses followers or friends).Both fields are numeric and contain the users id's.In order to distinguish if the link is follower or friend there is a third field, called type which can be either 1 (=follower) or 2 (=friend).So the data would look like this:

boss - client - type
12345, 67890, 1
12345, 54321, 2

If user with user id 12345 had a follower (type 1) with user id 67890 and a friend with user id 54321...In order to avoid getting duplicate rows I also added a unique identifier which is of the form boss_id-user_id-type.So the above row looks like this:

12345-67890-1, 12345, 67890, 1
12345-54321-2, 12345, 54321, 2

That works just fine.For several reasons I also needed data of the form source - target.So I also made another table (table02) of this form.

67890, 12345
12345, 54321
...

In table 2 you don't need the "type" field since the position of the user id shows the type of relationship.Still, you need a unique identifier in order to avoid duplicates, so I added on with the form: source_id-client_id..So table02 lookes like this

67890-12345, 67890, 12345
12345-54321, 12345, 54321
...

Both tables also have a date/time stamp for each line.As you can see, table01, having also a type field is bigger than table02.The problem is when I try to append data, exactly the same data in both tables.Appending data to table01 is ok, while appending data to table02 (which is smaller, having one less field) takes a really long time, maybe 10 times as long as appending data to table01.To make sure that no query's are causing the problem I have tried first creating temporary tables with the data to be appended, no duplicates, nothing that would cause the database to make extra calculations and used a simple update query with no filters to append data.Still I get the same result, table02 takes a very long time to finish while table01 finishes in no time.

View 2 Replies View Related

Query Append Data From Another Database

Mar 15, 2012

I have a database X, I want to append data from tables in another database Y, into database X (tables in both databases have the same name: [Y].[Names] into [x].[Names]).

My question is:
How to make this happen by allowing me to search for Database Y (like if i want to save a Word file, a window will open searching for the folder i want to save the Word file in).

View 2 Replies View Related

Queries :: How To Append Table - Cannot Open Database

Mar 23, 2014

how can i appnend table from one table to other table when i do it says...Cannot Open Database". It May not be a database that your application recognizes , or the file may be corrupt.

View 2 Replies View Related

Tables :: How To Paste Append Data

Sep 23, 2013

I want to Paste append some data into a table in access. The data which I need to paste is like to following:

3100986082 7DVJ438 264539280 1FWS545 11792093 1261185446

Access leaves the data with the letters in it (shown in bold) blank, how can I solve this, because I want to paste everything. I already put in design view the settings to text, but it doesn't work...

View 3 Replies View Related

Append Table In Access Database Using Data From HTML

Dec 12, 2012

I am new to microsoft access and i am currently using microsoft access 2010...I have a students table in my access database and i have now append this table with data from a HTMLhow can i do that? using append query

View 10 Replies View Related

Queries :: Update Or Insert / Append Record In Database

Jun 5, 2013

I have two tables "TABLEA" and "TEMP"

fields in both tables are
Cust ID (Primary key)
Cust Name
Address
Cheque No
Amount
Location
Zone

I need query when i click on command button on form

if "Cust ID" which is primary key in "TEMP" Table match with "Cust ID" from "TABLEA"

It will update the record in "TABLEA" if not then append the record

View 1 Replies View Related

Common Data In Two Tables Of Different Size, How Do I Append From One To The Other..?

Jul 23, 2006

Hello,

Firstly I would like to state that i have very little knowledge of Access databases (my job is not computer related) but I am trying my best to get a few issues sorted...
So here it goes: I have 2 tables, one large table with about 3-4000 rows(horizontal lines), and a smaller table with only about 1000 rows.

The rows in the big table contain Products (name, dates, adresses, phone numbers etc) and every product has a 'Codename' in a column-line (vertical)
of the big table. (there are about 3000-4000 products)
In the small table there exists a similar column-line (vertical) that contains 'Codenames' of the Products listed in the big table, but there are only ~ 1000 'Codenames' not the full 4000 ! The reason for this is that in the small table there exists another column-line(vertical) that for every code listed (in the small table) contains a certain specific "description".

My task is to get all the 1000 "descriptions" from the small table inserted into the Big table accordingly to their proper 'Codename'. This means createing a new column in the big table and: if the codename exists in small-table insert the description in the new column-cell, if the codename doesnt exist in small-table leave new-cell empty...

How do i do this ? :) Im guessing some coding is envolved.. and i have no clue whatsoever....
Thank you,
George P.

View 2 Replies View Related

Modules & VBA :: Append Data From Several Tables To One Table

Feb 14, 2014

I have the following code, the purpose of the code is that to take all rows from each table to append them into one table. However, I am testing this code with 2 tables (Table2 and Table3) each table has 2 records, when I run the code, it keeps adding records to table 1 that exceeds one million. what is wrong with my code?

Dim tblString, I As Integer
Dim rstFrom As Recordset, rst2 As Recordset
Dim db As Database
Set db = CurrentDb
Set rst2 = db.OpenRecordset("Table1", dbOpenDynaset)

[Code] .....

View 3 Replies View Related

Queries :: Append Query In Different Levels Of Tables

Dec 17, 2013

I receive the data from engineering team lets name it as MAster database( in DB2 database - Read only ) and then i want to assign the data to each member and staus will be updated by them.So my Idea is upload the data from Engineering team (MAster database) to my (Local database), i think of using Append query if there is any changes in engineeiring data after i append the data then i can use the Update query to modify the data.

But once i assign the job to every member from my Localdatabase, i want it to stored in a data base with their name because it is a huge volume data and it will go for years.The bottleneck is If i use the Append query here, the changes from Masterdatabase to Locadatabase will not reflect in Team members database? is any solution for this or i have to use the Update query in Localdatabase and also in Team memers database?

View 1 Replies View Related

Tables :: Append Data To Access Table From MS Word

Sep 27, 2012

I have a table in MS Access 2010 with a Date field and 3 Memo fields. I wish to append data to the Access table from a MS Word doc that has a date field and 3 memo fields. My wish is to have a command button on the MS Word doc which appends the data to my Access Table.I am aware that a web page can append data to an Access table.

View 2 Replies View Related

Queries :: Append Data To Table?

Apr 20, 2015

I have a table called dbo.userinfo with a primary key called employeeid and a field named jobfunction.

i have an intermediate table named dbo.projectpositions with a primary key named projnumber and a foreign key named employeeid.

I have a 3rd table named projects with a primary key projnumber and a field called project manager.

I'm trying to append the Projects table so that any projects that a worker has worked on (dbo.projectpositions) that is listed as a project manager (jobfunction) will have their employeeid fill in the project manager field on the projects table. Looks something like this:

INSERT INTO Projects ( [Project Manager] )
SELECT dbo_UserInfo.JobFunction
FROM (dbo_UserInfo INNER JOIN dbo_ProjectPositions ON dbo_UserInfo.EmployeeID = dbo_ProjectPositions.EmployeeID) INNER JOIN Projects ON dbo_ProjectPositions.ProjNumber = Projects.ProjNumber
WHERE (((dbo_UserInfo.JobFunction)="Project Manager"));

But just can't figure out the next step to populate the project manager field...

View 2 Replies View Related

Queries :: Append Using Table Data

Jul 25, 2013

I basically want to use a set list (TableAddresses). This would be a Append Like "*InsertAddress*" I do this manually by simply typing 20 different addresses and then clicking Append.

Is there a better way to do this simply?

View 1 Replies View Related

Queries :: Append Only Data On Filtered Form

Jul 2, 2015

I have a list of dates in my Form1.

When I click on a date it opens Form2 to show that dates specific details.

I would like a macro on Form2 that appends the filtered results to another table.

I think I am just struggling with the references to Form2 in the append query criteria.

View 1 Replies View Related

Append Query, Multiple Tables To Multiple Tables In Another Database

Nov 29, 2007

Can a Append Query move all my data stored in multiple tables to another database with a identical table structure?

Because as I try to work the query, I keep getting prompted to "Select a table" I want to append to, and I don't want to append to just one table...

View 4 Replies View Related

Queries :: Append Query - Automatically Update Tables Depending On Value Of Yes / No Field

Feb 25, 2014

I am giving two tables and I need to create a macro that automatically updates these tables depending on the value of a Yes/No field. If it's No, it's in the 1st table TableOne, if it's Yes it automatically updates to TableTwo.

So, the best way I saw to go about is to set up an append query and then create a macro that runs it

So my tables have the values FirstName, LastName and isValid (more but keeping it short)

So for my append query, I put TableTwo in the pop up I get. Then, where it asks for the field I put it

Field:FirstName
Table:TableOne
AppendTo:[TableTwo].[FirstName]
Criteria:[TableOne].[isValid] = 1

I do this for all (it was autocompleted except the Criteria field). I tried to keep Criteria with data only for isValid but that didn't work. I wrote it for all the field names, still didn't work. Whenever I click run it says it'll append 0 rows.

View 5 Replies View Related

Queries :: Append Multiple Data With Update Query?

Aug 6, 2013

In access Im working with two tables, this is my setup

tableA.documentnr
tableA.revison

tableB.documentnr
tableB.revision

Both tables are filled with data, Table B contains the same kind of data as table A, But tableA has documentnumbers with different revisions (for example revision a,b,c, for each revision a seperate row). Table B might have an identical document, but just one revision (like revision a).

Now I like to append the data of tableA to tableB, except if a revision is similiar to a revision in table A. (There is more metadata involved, but I will do it step by step)

Im not working with primarykey data, becayse in the end result table B will also have multiple (identical)document numbers with different revisions on different rows.

I tried to use the update query but it doenst append the documentnumbers where the revision is not present in table B I attached a image of the tables.

View 9 Replies View Related

Queries :: Append Query To Insert Data From Excel

Feb 5, 2014

I want to create a append query in access 2003 to insert data into an existing table from Excel workbook.My Table name is TokenDetail in Access 2003.

And Excel File is TokenCreation.i want to create query with msg box and requered file path for data becuase my excel files have various path and name.

View 8 Replies View Related

Queries :: Append Query Needs To Add Data From A Field To The Table

Mar 13, 2014

I want to set a table field's default value to whatever is displayed in a certain field on a certain form at the time.In other words, say I have a database with a table called TABLE1, and two fields called NAME and SCHEDULENUMBER. I have a form called CreateSchedule with a SCHEDULE NUMBERCONTROL form and a NAME form, and I can enter names onto it, and it records to the proper SCHEDULENUMBER. So if I pull up SCHEDULENUMBER 4, and add three names, when I go back into TABLE1, I can see those three new names, and each one has the SCHEDULENUMBER set to 4.

What I'm trying to do is write an APPEND QUERY to copy a list of names from a different table, and paste them into TABLE1. The problem is that the other table doesn't have a SCHEDULENUMBER field. What I want to do is put a button on the CreateSchedule form that runs an APPEND QUERY, and sets the SCHEDULENUMBER to whatever value is displayed on CreateSchedule's SCHEDULENUMBERCONTROL field.

I tried setting a default value in TABLE1's field properties for that SCHEDULENUMBERCONTROL field, but I keep getting error messages. I just want TABLE1, whenever I add a new record (regardless of how I add the record: manually typing it or clicking the append query button) to look at the form CreateSchedule, and set it's own SCHEDULENUMBER field to whatever is displayed in CreateSchedule's SCHEDULENUMBERCONTROL form.

View 1 Replies View Related

Append Two Queries - Combining Data Into One Datasheet View

Nov 20, 2013

Is it possible to append two queries? The queries have the same layout and labels...it's just a matter of combining the data into one datasheet view.

The two queries are below:

1)
SELECT prc.Market AS Geography, trp.Product, trp.Indication, trp.[Variable Name], trp.Period, Round(prc.Index*trp.[Variable Value],2) AS [Variable Value], trp.Outlet, trp.Daypart, trp.[Program Name], trp.Len, trp.Creative, trp.Campaign, trp.[Campaign Name], trp.[Media Type], trp.Vendor, trp.Channel
FROM tblTRP AS trp, tblTRPpercent AS prc
WHERE (((trp.Indication)=prc.Indication) And ((trp.[Media Type])=prc.Type) And ((trp.Geography)="National") And ((trp.Month)=prc.Month));

2)
SELECT prct.DMA AS Geography, tv.Product, tv.Indication, tv.[Variable Name], tv.Period, Round(prct.percentUniverse*tv.[Variable Value],6) AS [Variable Value], tv.Outlet, tv.Daypart, tv.[Program Name], tv.Len, tv.Creative, tv.Campaign, tv.[Campaign Name], tv.[Media Type], tv.Vendor, tv.Channel
FROM tblTVOtherMetrics AS tv, tblDMApercent AS prct
WHERE (((tv.Geography)="National"));

View 3 Replies View Related

Queries :: Extract And Replace With Additional Data Append Delete Query

Jul 1, 2015

I have a Table1 served by Form1..It is a list of: UnqID, process, quantity, totaltime(in seconds).I want to click on a record to bring up a filtered Form2 with the chosen record on it.What I want to be able to do is to now split the quantity (and the time) and put these new records back into Table1 and delete the original record

EG

ID1,10,write a report,2400

I want to delete this and replace it with two (or three/four etc) replacements, but still adding up to 10 quantity and 2400 seconds so that the new data could be:

ID2,5,write a report,1200
ID3,5,write a report,1200

My initial thoughts are to create a holding table to:Append filtered data on Form2 to a holding Table1hld (i don't know how to do this) delete data in Table1.then enter the new quantities into a holding Table2 (that I will input myself) and then append (through a series of queries back into Table1).The first problem is how to append (and subsequently delete) the filtered record from Form2 to Table1hld.

View 1 Replies View Related

Modules & VBA :: Code To Delete Table And Then Run 4 Append Queries To Refresh Data

Jun 11, 2014

I have a table called "EquipmentRequired" which is populated by 4 append queries,

5000BaseReq, 6000BaseReq, 6000IFBBReq, EquipmentReq which get some of their information by counting fields in another table but all have the same field names.

The queries contain all data that is initially used to append new records to the table and this works fine.Unless some information changes or a record is added then I would like to add a button to a form and call it "update equipment" behind which would run a vba code firstly to delete all the records in "EquipmentRequired" table then run the 4 queries without the warnings and re-populate the table.

View 9 Replies View Related

Queries :: Inventory Transaction Form - Append Query Data Type Mismatch

Dec 8, 2014

I'm receiving an error indicating there is a data type mismatch when running a query named qappInventoryTakeOn.

Data is entered into the Inventory Transaction Form. If the transaction type is "Take On", when the update button is clicked the record will be saved to tblInventoryMovements and then qappInventoryTakeOn should run to update tblInventory, but I keep running into the aforementioned error.

View 2 Replies View Related

Tables :: Two Identical Database - Importing Tables By Linking To Data Source

Dec 3, 2012

I have 2 identical database in terms of structure but it differs in data.

Basically I would like to import data from subDatabase to mainDatabase and ensuring that there are no duplicate records.

I have used the "link to datasource method" through importing the tables to have the "updating" function.

However, this method also means that the records in mainDatabase are also imported over to subDatabase which I do not want.

Is there a method to ensure that the records are shared/update one way only? (i.e. import from subDatabase to mainDatabase and not main to sub?)

View 1 Replies View Related

Queries :: Append Data In Access Pivot Table To A Table (or Requery On It)

Jan 22, 2015

Is there a way to append a pivot table to a table or possibly make a query based on a pivot table? I need to get a count of Part Numbers and I need the average price for all these parts. Additionally I want to ignore a count of less than 3.

Also I am having trouble filtering on the count in the pivot table... haha, so I was gonna Query on it later on.

View 2 Replies View Related

Queries :: Only Identical Data Listed From Tables And Not All Data

Sep 7, 2013

Attached you will find an example with the problem.

The query is only searching identical data between both tables.

I want it to show results from all users, with all the devices each user has.

What am I doing wrong with the query?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved