Queries :: Get Next Higher Value OR If Result Empty

Feb 28, 2014

I'm trying to create a query which returns me the next higher number..My table: tblPersons

Code:
ID, Name, balance,
10 John 1000
11 Alice 2000
12 Bob 3000

My query:

Code:
SELECT TOP 1 name FROM tblPersons WHERE( (balance)>([InputBalance])) ORDER BY balance ASC

Input:
[InputBalance] = 500
Result: John

[InputBalance] = 1234
Result: Alice

[InputBalance] = 9999
Result: EMPTY
Result should be Bob

it's possible to combine this logic into one query?

View Replies


ADVERTISEMENT

Queries :: Field Is Empty - Query To Update Table But No Result

Feb 26, 2015

I have a created a query which I want to update a table. The field is called DTP. I have the Workingdays2 module in place as well as the Holidays Table. The dates (date only) are called Time in and Transaction date. I want the table to update records only if the entry in Completed is Yes. I have attached screenshot of what I have in query. I am no good whatsoever at VBA so I used the Query design view. It shows how many records will be updated (which is a valid number) and shows me which field will be updated. However when I run the query and then opend the Table the DTP field is empty.

View 2 Replies View Related

Queries :: Conditional Query To Post Result In Field And Filter Result Records?

Mar 5, 2014

I am working with Access 2010, on vista. What I have is a query made up of two tables, one product the other inventory. (see below) query.jpg

In the product table i have a field called "minimum reorder level". In the inventory table i have two fields one called "number in stock" and "number on order". What i want to happen is "number on order" to be filtered by the result, if the "number in stock", is less than "minimum reorder level", if it is, have the result placed in the "number on order" field. EG. if the "number in stock" = 2 and the "minimum reorder level" = 5 then 3 would be placed in the field "number on order" and only the second record from the query would be visible (see below) Query result.jpg The result of this would mean that the field "number on order" would be populated with the result and the and query would also use this to filter the record.

View 1 Replies View Related

Queries :: If There Is No Result In Query Need To Have Default Result Zero

Oct 12, 2013

I there is no result in query, I need the default result zero in my form field. I only use query wizard to create queries.

View 5 Replies View Related

Queries :: List Of Dates And Records With No Matching Record OR Existing Record With Higher Date

Nov 24, 2014

I've been asked to get some information from my database and I'm a bit stuck.

I have a list of refunds in tbl_main and each one includes a dateReceived. I make a record in either tlk_located, tlk_unableToLocate or tlk_bulk depending on the outcome when we're trying to send the money back to whoever it belongs to. Each table has a time stamp (named locatedTime, unableTime and timestamp respectively) field

My manager wants me to report how many entries were unworked on each day in the year, and what the value of them was. An entry is unworked if there is no entry in either of the 3 tables.

So I need a query that lists a range of dates, and for each date counts the number of entries where tbl_main.dateReceived is <= to that date and either has no record in located,unable or bulk or has a record with a timestamp > than the date. (It has been processed now, but hadn't been on the date we are looking at)

I can manage a query that looks at a certain date that it prompts for on each run:

Code:
SELECT Count(tbl_main.trust2PK) AS CountOftrust2PK, Sum(tbl_main.amountRefunded) AS SumOfamountRefunded
FROM ((tbl_main LEFT JOIN tlk_located ON tbl_main.trust2PK = tlk_located.trust2FK) LEFT JOIN tlk_unableToLocate ON tbl_main.trust2PK = tlk_unableToLocate.trust2FK) LEFT JOIN tlk_bulk ON tbl_main.trust2PK = tlk_bulk.trust2FK
WHERE (((tbl_main.dateReceived)<=[cutoffDate]) AND ((tlk_located.locatedTime) Is Null Or (tlk_located.locatedTime)>[cutOffDate]) AND ((tlk_unableToLocate.unableTime) Is Null Or (tlk_unableToLocate.unableTime)>[cutOffDate]) AND ((tlk_bulk.timeStamp) Is Null Or (tlk_bulk.timeStamp)>[cutOffDate]));

I would like a query that lists all dates in a range, and shows the same information for each day listed.

View 9 Replies View Related

Choose Higher Value

Aug 8, 2005

Hi,

Is there a way to automatically choose a value such as 0 if the expression goes to a negative number?

E.g. I have a query that will subtract a numeric field from 10. If 10 - [numericfield] is less than 0, then I only want it to display 0. Otherwise, it can display the value if it is positive.

Any help would be much appreciated.

View 3 Replies View Related

Starting Autonumber Higher Than 0

May 18, 2005

Hi,

I want to use an incremental number as a reference for records in a database. No probs, I use an autonumber. But the user wants the reference to start from 275.

Does anybody know how to start an autonumber off from a higher number (eg 275), without first creating and deleting 274 records. Is there an easy way of doing it.

Or should I not be using autonumber for this, but rather some other wizzy method which somebody is prepared to show me.

Thanks,
Adam.

View 3 Replies View Related

Queries :: Combine Two Queries Result Of Second Query In Another Column

Mar 15, 2014

i I have two queries.. What i'm hoping is to combine the result into one query but not in one column only but instead the result of the second query should be beside the first query.. The result of the second query should be added as a new column.

First Query

SELECT tbl_uSers.UserName, Count(tbl_rEceived_eMail.EntryID) AS eMailReceived
FROM tbl_rEceived_eMail INNER JOIN tbl_uSers ON tbl_rEceived_eMail.UseriD = tbl_uSers.UseriD
GROUP BY tbl_uSers.UserName;

Second Query

SELECT tbl_uSers.UserName, Count(tbl_rEceived_eMail.EntryID) AS eMailProcessed
FROM tbl_rEceived_eMail INNER JOIN tbl_uSers ON tbl_rEceived_eMail.UseriD = tbl_uSers.UseriD
GROUP BY tbl_uSers.UserName, tbl_rEceived_eMail.ProcessedYN
HAVING (((tbl_rEceived_eMail.ProcessedYN)="Y"));

View 2 Replies View Related

Query Based On The Higher MTD Sales

May 29, 2006

Hello,

I need to write a query based on the higher MTD sales in the series of each fabrics within series of Sales Group and Prod Group . All info is from one table

Order by: Sales Group (alphabetical ord) , Prod Group (alphabetical ord) , sort Fabric Group based on the TOP MTD sales

Sales Gr: Active
Prod gr: Adult, Girls, Plus, LG
Fabric Gr: a,b,c,d,e,f...
StyleNum: 1,2,3,4,5,6...(PK)

Sales Gr: Dance
Prod gr: Adult, Girls, Plus, LG
Fabric Gr: a,b,c,d,e,f...
StyleNum: 1,2,3,4,5,6......(PK)

Sales Gr: Yoga
Prod gr: Adult, Girls, Plus
Fabric Gr: a,b,c,d,e,f...
StyleNum: 1,2,3,4,5,6......(PK)

Thank you

View 1 Replies View Related

Keep Access 2000 & Higher Out Of My 97 Database

Dec 6, 2006

My database is written in Access 97 (I know get out of the stone age) but we have a mix of office 97 and office 2003 users. Anyway I'm afraid that one of the few people that have access 2000 or higher will open my database and convert it. I found (through here) code to check the version but it is attached to a form opening which is way to late. Is there a way to have access check the version as soon as you click to open the database and if it isn't 97 close the database?

View 4 Replies View Related

Prevent And Signal Empty Queries

May 23, 2006

How do I signal that a query has produced an empty dataset. I have a form that asks for some data via a query and if invalid data is entered I get a blank form. I would prefer an error message to be displayed rather than the blank form. Any ideas or I am I missing something really simple?:confused:

View 1 Replies View Related

Queries :: Appending Excel Data To The Next Empty Row?

Aug 28, 2014

I have a problem, so I am trying to append data from excel which works fine but I want to append it to the next empty available row in the datasheet view. At the moment it is just appending it to the top, first line. Im using MS Access 2007-2010.

how to do this?

View 6 Replies View Related

Queries :: All Results Not Shown Due To Empty Fields

Sep 9, 2013

I have a query which is supposed to search for all engines with a power rating between a user-specified range ('Rated Power'). The results should state all of these engines along with a few more related details ('System_ID_No', 'Project No', 'Rated Speed', 'Other Ratings' and 'Cylinder Capacity') that are useful to know. However, the problem arises when these other fields are empty. If empty, the related engine results do not appear in the final results spreadsheet. How do I make sure they are included aswell?

SQL:

SELECT tblProjectOverview.System_ID_No, tblProjectOverview.[Project No], tblProjectOverview.Customer, tblEnginePerformance.[Rated Power], tblEnginePerformance.[Rated Speed], tblEnginePerformance.[Other Ratings], tblEngineDefinition.[Cylinder Capacity]
FROM (tblProjectOverview INNER JOIN tblEnginePerformance ON tblProjectOverview.[System_ID_No] = tblEnginePerformance.[Sytem_ID_No]) INNER JOIN tblEngineDefinition ON tblProjectOverview.System_ID_No = tblEngineDefinition.System_ID_No
WHERE (((tblEnginePerformance.[Rated Power]) Between [Enter minimum power rating (kW):] And [Enter maximum power rating (kW):]));

View 10 Replies View Related

The Higher The Database Size, The Slower The Query Process?

Jul 10, 2007

I am developing a database and testing it with dummy data. With 50,000 records, the query process using SQL command is just OK. But if I double the total records, the query process takes longer time. The query is to make recapitulation using SUM of SQL command based on certain criteria. Any idea to make the query faster?

Thanks.

View 2 Replies View Related

Queries :: Count Empty Cell After 1 Month Since Registered

Jun 26, 2014

I want to Count the amount of not treated improvements after 1 month in a report. The rules will be if the improvement cell is empty one month after the date the improvement is registered, then it should be counted.

View 3 Replies View Related

Queries :: Update Table Where Column Cell Is Empty?

Aug 6, 2015

I have a small problem: I have a table with over 20 columns. In every column there are some 1's, but the other cells or tuples are empty. In these empty cells I want to write a 0. So I need an UPDATE query.

But what should I write for the WHERE condition? So he should check every cell and if there's no 1, write a 0.

View 7 Replies View Related

Queries :: How To Handle Empty Dataset As Form Recordsource

May 7, 2013

In Access 2010, I'm writing VBA code that assigns an ADO dataset as the recordsource for a form. The query itself varies and is constructed from a search term typed in a textbox by the user. The code below works perfectly until the dataset is empty, when no records satisfied the WHERE criteria. In that case, there is a very long pause (presumably a timeout?) and I eventually get the error message "ODBC call failed." I tried to get around this by testing the number of records in the dataset (see toward the end) before assigning it, but it makes no difference in the behavior, so I'm thinking the actual assignment isn't the issue ... something else is.

If it matters, the "FROM qry_beneficial_owners" in this case is predefined query local to my Access db. That query is based on a linked view from a SQL server.

Code:
Public Sub RunSearch(SearchTerm As String)
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Dim sql As String
Dim cols As String
cols = "[acct], [acctname], [planid]"

[Code] ....

View 1 Replies View Related

Queries :: Listbox Filter Not Returning Empty Values

Jun 14, 2013

I have a form in which users can enter data in several textboxes to filter the listbox below it, this works great except for the fact that when a record lacks certain data it doesn't show up

Basically there are 4 filters, one for the name/id which works great, as the entries without id's show up just fine but this filter needs to be checked against the other 3 filters, for their group, education and type.

Lets use group as an example.

When a student has no group it should only show up when the group filter is an empty string. AFAIK the wildcards should see to that.

Currently however, when a student has no group, it doesnt show up at all unless I remove the | Like '*' & [groepFilter] & '*' | part from the query.

I've never used complicated WHERE's like this so it might be something very simple. I think I could get it to work using VBA and modifying the rowsource of the listbox from there but this would be a lot easier and I'm curious as to why this doesn't work.

The SQL:

SELECT Student.Studentindex, Student.studentid, Student.studentvn, Student.studenttv,
Student.studentan, Student.Groepcode, Opleiding.opleidingsnaam, Opleiding.type
FROM Student LEFT JOIN Opleiding ON Student.opleidingid = Opleiding.opleidingid
WHERE (((Student.studentid) Like '*' & [naamFilter] & '*') AND ((Student.Groepcode) Like '*' & [groepFilter] & '*')

[Code] ....

View 2 Replies View Related

Queries :: Return Records With Both Empty And Populated Field?

Apr 8, 2013

I am trying to create a query that returns records whether a field has data or not...

There are three fields in question, SSN, DOB (this is a date field), POB (this is a foreign key representing a state in the query shows the actual state). Now unless the criterion is different then I just need the answer for one I can reproduce.

I would like to do this in the criteria box in the query.

The query pulls from one table, some of the employees in this table have the three fields populated some don't. I would like the query to return all employees...

View 2 Replies View Related

Queries :: Listbox Returns Empty Before Applying Filter

Jul 14, 2015

I am using two combo boxes to filter a list box with the code below. The combo boxes work, but when the form opens, the list box is empty until it is filtered using the combo boxes.

I want the list box to return all records when no filter is applied.

Here is the code:

SELECT Q_Gender_Statistics.ParticipantID, Q_Gender_Statistics.Gender, Q_Gender_Statistics.Date,
Q_Gender_Statistics.Year, Q_Gender_Statistics.[First Name], Q_Gender_Statistics.[Last Name],
Q_Gender_Statistics.[Other Names], Q_Gender_Statistics.[Passport No], Q_Gender_Statistics.[Duty Station], Q_Gender_Statistics.[Contact Number] FROM Q_Gender_Statistics WHERE (((Q_Gender_Statistics.Year) = Forms!F_Gender_Statistics!cboYear) AND ((Q_Gender_Statistics.Gender) = Forms!F_Gender_Statistics!cboGender)) ORDER BY Q_Gender_Statistics.Date DESC;

View 4 Replies View Related

Queries :: Pull Letters From Notes Field If Empty?

Oct 29, 2014

I have a query that holds data based on a field. If the field [Device In] is "TimeStation-1" in TblTime for example it holds "AV" in the field [House]. Trouble is some fields are blank and when this is so I want it to pull the last two letters from the [Notes] field. I have attached the database. The query is [QryDeductionsandSleep Ins].

View 4 Replies View Related

Queries :: Display Empty Rows For Missing Data

Jul 28, 2014

I'm trying to make a sub form that displays the hours of an employee selected in a listbox. I've got most of it working but having a bit of an issue.

The info for thre query is in 3 tables:
tblStaff (name etc)
tblShifts (start and end times for days that this employee works)
tblDays (a list of days names so I can use numbers elsewhere)

My query looks like this:

Code:
SELECT tblDays.dayName, IIf(Nz([startTime],"")="","NWD",[startTime]) AS start, IIf(Nz([endTime],"")="","NWD",[endTime]) AS [end], tblStaff.staffName
FROM tblDays LEFT JOIN (tblStaff RIGHT JOIN tblShifts ON tblStaff.staffPK = tblShifts.staffFK) ON tblDays.dayPK = tblShifts.workingDay
WHERE (((tblStaff.staffName)=[Forms]![frmMain]![lst_myTeam] Or (tblStaff.staffName) Is Null));

This worked fine with a single user and some test data - it correctly displayed all days of the week, with start/end times on Mon and Tues where I had entered shift information, and "NWD" against all other days.

However, when I add a couple more employees to the mix it shows the correct info for the first employee, but anybody else it will only display days where person 1 doesn't have any hours. I haven't entered any hours for the new employees, but the query should still display Mon-Sun with NWD in every column. It shows Wed-Sun but Mon and Tues are missing.

I've tried different join types but they all come back with "ambiguous joins" error when I try to run.

View 4 Replies View Related

Queries :: SQL Where Statement Linked To Fields When Field Is Empty

May 23, 2013

I'm having trouble with using a where statement linked to fields when the field is empty. I need a way to say if field is null then 'do nothing'/'select all' else use the text from the box.

I have a form (ServicesRCSSearch) which has 3 combo boxes (Location1, Location2 and Location3). These fields are linked to a query. The button on the form generates the query.

My SQL for the query is currently:

Select Services.Key, Services.Location, Services_1.Location, Services_2.Location
From Services, Services_1, Services_2 (copies of the same table all left joined)

Where
((IIf(forms!ServicesRCSSearch!Location1 Is Null,"",services.Location=forms!ServicesRCSSearch! Location1))<>False)

And ((Services_1.Location)=IIf(forms!ServicesRCSSearch !Location2 Is Null,forms!ServicesRCSSearch!Location1,forms!Servi cesRCSSearch!Location2))

And ((Services_2.Location)=IIf(forms!ServicesRCSSearch !Location3 Is Null,forms!ServicesRCSSearch!Location1,forms!Servi cesRCSSearch!Location3))

This works in that it uses the fields to filter the query but when Location1 is empty there are no results as you can see from the code.

View 6 Replies View Related

Forms :: Retrieve Info From Another Query - Higher Column Numbers?

Aug 22, 2014

When I attempt to use the me.field = me.combobox.column() method to retrieve info from another query,it only works if I use column 0 or 1... it doesn't work with higher columns number.

- field name: cbofi
- row source: listado-unico-fi <-- it is a query with unique values and 7 fields in total
- event procedure, change:

Private Sub cbofi_Change()
Me.txtDOCTPT = Me.cboFI.Column(1)
Me.campovia = Me.cboFI.Column(5)
End Sub

- txtDOCTPT is the field that indeed works
- campovia is the one that does not work

I tried using column(0) and column(1) and it worked fine... but higher column numbers do not work. Just mentioning because the field names are all right.

View 3 Replies View Related

Queries :: Word Recipient List Empty With Access Query

Sep 1, 2014

I have a query in Access and a word document that opens up the query. Currently the query contains every record in the database. If I alter the query in Access to select a certain set of records (based on dates) when Word opens the recipient list is empty. Checking for errors it says there were no records or no data records matched query options.

How can I get Word to open and use the modified query?

View 3 Replies View Related

Queries :: Recordset Is Showing As Empty But Query Wizard Returns Records

May 12, 2014

I'm trying to write record set contents to excel. My query runs perfect in access query wizard, but recordset showing as null. My VBA code

Code:

Dim cnn As ADODB.Connection
Dim recordst As ADODB.Recordset
Dim strSQL As String
Dim strPath As String
Dim appXL As Excel.Application
Dim wb As Excel.Workbook

[Code] ....

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved