Queries :: Getting Date / Time Range - Date And Time Are Separate Fields
Mar 13, 2014
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName
FROM Staff INNER JOIN myTable ON
Staff.ID = myTable.StaffID
WHERE myTable.myDate >= #3/2/2014#
AND myTable.myDate <= #3/3/2014#
AND myTable.myTime >= #8:00PM#
AND myTable.myTime <= #11:00PM#
ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I have operators that enter equipment downtime information into the database. I need to create a report that pulls all records that have a start date and time based on a start date (field name FromDate on form) at 7:00 AM to an end date (field name ToDate on form) at 6:59 AM and shows the total duration in hours for each record.I'm having difficulty getting my query to display the correct results for the date and time range. Duration calculations work perfectly.Here is my main table only using fields pertinent to this post:
Field Name Data Type Description Exception_Number AutoNumber Primary Key ExceptStartDate Date/Time Start Date formatted as Short Date ExceptStartTime Date/Time Start Time formatted as Medium Time ExceptEndDate Date/Time End Date formatted as Short Date ExceptEndTime Date/Time End Time formatted as Medium Time
I have a weekly list of transactions that come in the format DD/MM/YYYY HH:MM:SS, I need to tag these individual transactions with a week number. The problem is, I can't use the Datepart function etc. as the day is classed as running from 8am to 8am rather than midnight. I have a list of all of the weekly date ranges for a few years (with the time) so I was able to solve this problem in excel by using the Index and Match functions. However, I'm trying to automate this process as much as possible so I'd rather perform this function in Access.
I have a form that request information from the user (StartDate, StartTime, EndDate and EndTime) the problem is that it's not working. The only way I can get any data to show is when I remove the StartTime and EndTime. Only then will it pull the items from the StartDate and EndDate.
Here is what I have as my criteria: Between [Forms]![OpPROD_ALL]![StartTime] And [Forms]![ OpPROD_ALL]![EndTime] And Between [Forms]![ OpPROD_ALL]![StartDate] And [Forms]![ OpPROD_ALL]![EndDate]
The users will be able to request a report based on a start and end date along with a start time and end time.
Side note: this is to pull date for 3rd shift (Example) 4/14/2013 10:00PM - 4/15/2013 10PM
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only. ([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null) How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I have an database that uses a couple of different date ranges, so I created a table that shows the different date ranges that may be required (xReport Dates) so I didn't have to keep manually editing queries or entering dates every time.
I have one query that appends data from one table into another based on a date range that you need to manually enter when prompted; I can't seem to get it to refer to my xReport Dates table for the range.
I have to create a query in access that will calculate two Date and time fields [Date & Time Left]/ [Date Returned], need to figure out between the two fields. Trying to identify when the rep returned the call and the number of business hours (6:00am - 4:30pm) it takes to return a message in Ms Access 2010.
The only issue is the calculation has to be done by time and so I have to calculate what time they left the message(so the difference between [Date & Time Left] and [Date Returned) [Date & Time Left] and when the rep returned the message which is suppose to be [Date Returned] but the problem with this field is the data entry is in date format (10/9/2014, 00/00/0000) of Date and not Date and Time like the [Date & Time Left] field, so I don't know what to do now. Not sure what to do now not a database that create or have allot of control over.
I have a query based on a table which has a date field. the field both in the table and the query have the time also in the date value so when I try to query on a date I get nothing if I copy the date and time from the field I will get the result for that record if I just use the date I get nothing. I have tried the format which does display just date but if you click on the field the time is also there You must be able to query for a date only and get all the records.
I'm working with a linked table that has a seperate field for the date, and a seperate field for the time (which show in the linked table as '11/30/1899 9:46:00 AM'). I need to calculate the time difference between 2 entries.
How can I merge the 2 fields into a combined date/time field for my calculations?
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
I have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
I am creating a query with criteria for a dates column. The column cotaining dates in my Table has many empty fields. I want to limit the criteria for my dates to >#1/1/2004#, but I don't want Access to exclude all the empty fields because I want all the data displayed for the purposes of my report.
What do I do? I'm not terribly familiar with Access, so please explain as completely as possible. Thanks in advance!
I'm combining two date/time fields in a query to an integer. The first field has the date, the second the time. I'd like the resulting integer to be without the opening 0. How can I do that?
That is, these are the two fields: 2006-09-14 (date/time) 15:00:20 (date/time)
And I'd like those two combined to be 60914150020 (integer) in the third field in the query.
I have a table in which each record includes a field showing the time that an event started and then another field which stores "how long did it take", these two fields are both defined as a short Time. I then have a query that runs through the "how long did it take" fields to produce an average time for the whole sequence of events. Two problems:
1. The average comes out as a decimal like 39553.367942 instead of several hours and minutes.
2. When I try to access this value using DLookup on a form I get "#error"
Im having a problem adding the date and time to a new record using a form. The 1st method i used was by inserting the default value set to Date() & Time() functions, this worked fine for over a year, but now on some computers on the network the following error pops up "function is not available in expressions in table-level validation expression".
The 2nd method I tried was to add a macro with 'setvalue' commands to the After Update event of one of the first field's that was entered, this entered the same information into the Time & Date field once the first field was updated. This now brings up the macro fault screen and the 'Halt' button has to be pressed to clear the error.
This only happens on the older computers that access the database, the new computers don't bring up any errors.
I created a Contact database where I have the date and time as two separate fields in one of the tables. I have them defined as such, but would prefer that the fields wait until I enter data into them and not auto fill with the current information. Is there a property of these fields I can set so that these fields do not get auto filled? Again this database is too large to send, so I hope that you can help without it.
For anyone that might be able to help me out, I'd very much appreciate it, as this is now number 2 stupid workaround that I'd like to resolve before I need counselling...;)
I have a Date/Time field that I'm importing into my database via .csv files. The field is setup like the example below in every .csv file:
4/2/2007 8:30:00 AM
Access keeps throwing errors and deleting all the field values in this field whenever I try to import. I know that Access does this when a Date/Time field includes data that is not delimited, but these field values seem to be perfectly formatted to me... what can I do to stop Access from chucking these on import?
Right now I'm just importing the data into a "text" field, and then changing it to "date/time" afterwards, but I'm worried that once the table gets too long I won't be able to re-index all those records anymore and my database will be useless since it depends on that field being "date/time" format...
All those better than I feel free to show me how and where I've been stupid:D
In my form I have a calculated field that works out the time elapsed for a job, worked out as the QTY/RUN RATE which gives me the time in hours. However I couldn't format the box as a date/time, as it is a calculation and the times may go over 24 Hours which results in the date/time giving me something like 31/12/1899 16:00 for example.
I've got around this now and I've formatted the results as HH:NN:SS using a public function in a module, but the problem is this is now stored as a text field. I've tried setting this to a number field but the formatting doesn't carry over. I've tried setting a custom format in the table as HH:NN:SS but then all I get is just a bunch of 0's, no calculation results.
So how to format this as a number field properly?
Also for any extra information:
- I know you're not supposed to store calculated results, but this is slightly different, the calculated field is a standalone text box and the bound field is a formatted text box. - The reason I have to store the calculated results is because my boss wants to eventually see a chart of the total hours of jobs each day, hence why I'm asking if this can be done as a number field.
I have a form that contains a subform. On the main form, there are 3 fields: [IncidentNumber], [OpenDate] and [OpenTime]. The subform, [CtrlLog Detail] , contains the log entry details for each incident number. Every incident number can have many log entries. Two of the fields on the subform are [EntryDate] and [EntryTime]. The fields work correctly and the forms are fine.The issue Im having is when a new incident number is created the [OpenDate], [OpenTime] and [EntryDate], [EntryTime] MUST be equal because of some filter queries for statistics. Right now the user must physically type in the date/times in these 4 fields when they create a new incident number, which means I'm having lots of data entry errors.
Using default value on either [EntryDate] or [EntryTime] on the subform doesnt work because it doesnt create a primary key for the underlying table and the subform will not allow any other entry (due to some other linked values) until that PK is created. The forms are based on tables linked by [Activity_ID] as the primary key. I want to create some VBA code to see that if the Incident number is a new number (meaning the user must type in the new incident number creating the primary key for [Activity_ID]), that access will automatically populate the [EntryDate], [EntryTime] fields to match the [OpenDate], [OpenTime] fields on the main form. The user will manually populate the [OpenDate], [OpenTime].
If the number is an existing number (and the user is simply adding a log entry to the incident number) then I want [EntryDate], on the subform to default to the system date/time ([EntryTime] should remain blank for user entry) while keeping [OpenDate], [OpenTime] unchanged. When the [EntryDate], [EntryTime] fields are populated on creation of a new incident number, I want the PK for the underlying table ([Log_ID]) to be generated.
automatically adding modified date/time to a record as it changes..I have a work log database for a team of people to keep track of workflow (documents in/out, stage in the workflow, owner of the record, etc.). I have a number of records that I want to automatically update a corresponding date/time field when it is changed. For example, one part of the workflow tracks a document through the approval of 5 different people. So I have a five records that are yes/no flags for approval and five records that are date/time for when it was approved. Right now my team is manually entering the five date/time stamps, but I'd like to have it automatically update when the check the "yes" box and update that field in the record.
I am building Access (2013) database for 100+ employees to keep track of their expiry dates of visa/passport/work permits, for that to work I need to be able to search between date range to generate a report to work on. please check out the image attached as it will explain better where I am stuck, with current settings access keeps giving me empty query table as I think it searches for exact same result in all 3 fields at the same time. But I want it to search between all 3 fields and display if any of the 3 fields falls into that range.
