Queries :: Getting Datatype Mismatch Error For Date
Jul 24, 2013
I had created a Access DB where there is a query named as "GenerateTimeHours", here whenever am trying to do a search by ID, Time & Date, always getting "data type mismatch error", I checked it and understand this Error is causing for Date Search Clause, I tried every possible way to change the date format, using #, etc etc but no result :Query As follows:
Code:
SELECT GenrateTimeHours.ID, GenrateTimeHours.MaximumSeatsNumber, GenrateTimeHours.DaysInMonth, GenrateTimeHours.Hour, GenrateTimeHours.Remaining, GenrateTimeHours.FinalSeats
FROM GenrateTimeHours
WHERE GenrateTimeHours.ID = 1 and GenrateTimeHours.Hour between #08:00:00 AM# and #10:00:00 AM# AND (GenrateTimeHours.DaysInMonth) between #7/2/2013# AND #7/3/2013#;
View Replies
ADVERTISEMENT
Mar 7, 2007
Hi,
When I click this buton I get an error on one of the following lines.. I can't figure out why and how to fix it.
the error I get is
run-time error '3464':
Data type mismatch in criteria expression.
I made the part where the error occurs in bold and italics
'submit for approval
Private Sub Command22_Click()
Dim rs As Object
Dim rs2 As Recordset
Dim db As Database
Dim name As String
Dim x As Integer 'will be used as flag for do while loop
Dim cnt As Integer 'this will contain the number of records in the recordset
'MsgBox (Me.projno)
Set db = CurrentDb
Answer = MsgBox("Are you sure you want to submit this timesheet?", vbYesNo)
'if cancelled
If Answer = vbNo Then
Else
x = 0 'initialize flag
Set rs = Me.Recordset.Clone
rs.MoveLast
cnt = rs.RecordCount
rs.MoveFirst
Do While x < cnt
If rs!statusPM = "pending" Then
MsgBox "This timesheet has already been submitted. You can't submit this again."
x = cnt
End If
If rs!statusPM = "approved" Then
MsgBox "This timesheet has already been approved by your supervisor. You can't submit this again."
x = cnt
Else
MsgBox (rs!projno)
Set rs2 = db.OpenRecordset("SELECT projmanager FROM Projects WHERE projno =" & rs!projno)
Do While Not rs2.EOF
name = rs2!projmanager
MsgBox (name)
rs2.MoveNext
Loop
rs.Edit
rs!statusPM = "pending"
rs!status = "pending"
rs.Update
x = x + 1
'MsgBox (rs!projno)
rs.MoveNext
End If
Loop
'clear variables
Set db = Nothing
Set rs2 = Nothing
End If
End Sub
Thanks in advance,
View 12 Replies
View Related
Apr 14, 2005
order_id is an autonumber key field form table Orders_table. Is is also selected in the row.source for the form I am using.
ComboOrder_ID is a combo box that looks up the order_id from the table with a SELECT...
... So I think the two should be the same datatype!
When I set the order_id in the combo the event procedure runs I get the following debug error:-
Runtime error '3464':
Datatype mismatch in criteria expression
This is the code for the after event on that combobox:
[code]
Private Sub ComboOrder_ID_AfterUpdate()
' Find the record that matches the control.
Dim rs As Object
Set rs = Me.Recordset.Clone
rs.FindFirst "orders_table.order_id = '" & Me![ComboOrder_ID] & "'"
If rs.NoMatch Then MsgBox "it's the <find> that is broken" Else Me.Bookmark = rs.Bookmark
End Sub
[end code]
Any help is much appreciated
Thx.
Kev.
View 3 Replies
View Related
Aug 22, 2014
I have a table 'Project Details' to which I have recently added a new field 'Last Invoice issued'. This field is a text field with a lookup and will default to 'No' for new records being added. When the related record is updated in my 'Invoices' table, I have set up a query to change 'Last Invoice Issued' to yes. This is all working fine, but it requires all the records in 'Project Details' to contain 'No' already in order for it to work. As there are over 1000 records in 'Project Details' I made a list in Excel of the right number of no's and copied it in. Most records were fine with the exception of 127. I can edit any of the other fields from the 'Project Details' datasheet or my data entry form, but when I try to edit one of the 127, I get a DataType mismatch error. I can't understand since the records are all in one table and have exactly the same DataTypes set up for each field, why I can edit some and not others? Is there some other place where DataType can be set up that may affect some records and not others?
I have tried to copy my table to post here but when I do that, I get a 'Index or Primary Key cannot contain a Null value' error due to the (New) record having the default values already in but the primary key not being filled until I save,.
View 2 Replies
View Related
Oct 21, 2013
I am getting a datatype mismatch error in criteria expression
Quote:
Private Sub lblManageEmployees_Click()
On Error GoTo lblManageEmployees_Error
Dim db As Object
[Code]....
View 5 Replies
View Related
Apr 28, 2014
Code:
Dim rs As Object
Set rs = Me.Recordset.Clone
rs.FindFirst "[OwnerID] = '" & Me![lstUsers] & "'"
Me.Bookmark = rs.Bookmark <---- error is here for the datatype mismatch or No record found
OwnerID is a string.
I have tried
Code:
rs.FindFirst "[OwnerID] = '" & Me.lstUsers & "'"
Me.Bookmark = rs.Bookmark
I have tried
Code:
Set rs = Me.Recordset.Clone
rs.FindFirst "[OwnerID] = " & Me![lstUsers]
Me.Bookmark = rs.Bookmark
View 14 Replies
View Related
Jun 25, 2014
I have this linked table query from a OBDC and I need to be able to filter out specific dates in that query. The dates in the table were in text format and I converted the dates using the CDate function. I wanted to filter the query to a single date and always I get the Datatype mismatch in criteria expression error.
However, filtering dates does work only when there are other specifications in the criteria fields (e.g. if I specify a date and and name). My SQL code in error looks like this:
SELECT
purch_hist.PUITM AS ITEM,
purch_hist.PUPO AS PO,
purch_hist.PUQTY AS QTY_RECEIVED,
CDate([purch_hist.PURDT]) AS RECEIPT_DATE,
itmcnt.ITBYR AS BUYER,
purch_hist.PUCST AS UNIT_COST,
vendor.NVNO AS VENDOR NO,
[code]...
This query works fine with a non converted date field, however the dates I need are in text format and need to be converted since I do not have permissions to edit the tables.
View 14 Replies
View Related
May 5, 2005
hi
I'm writing a pretty simple application to search an Access db. The query is:
Me.cmdSelectEvents.CommandText = "SELECT eventDetails.id, eventDetails.subject, " & _
"eventDetails.title, eventDetails.trainers, eventDetails.type, eventDetails.summary, " & _
"eventDetails.url, eventDates.date " & _
"FROM eventDates INNER JOIN eventDetails ON eventDates.id = eventDetails.id " & _
"WHERE (((eventDetails.subject)=@subject) AND ((eventDetails.type)=@type) AND ((eventDates.date)<@date));"
The parameters @subject and @type are simply strings selected from dropdown values.
The @date parameter is set by using a dropdown to select a timeframe to search in, specifically "Within 1 month", "Within 3 months", "Within 6 months". These options have the values "1", "3" and "6".
When the form is submitted the value of the selected option is passed into the following routine:
Dim valSelectedDate AsInteger
Dim dateParameter AsDate
valSelectedDate = ddlDate.SelectedValue
dateParameter = DateAdd("m", valSelectedDate, (Date.Now))
cmdSelectEvents.Parameters("@date").Value = dateParameter
When I run the debugger the right date value seems to be being passed to the sql query (i.e. if the user selects "within 6 months" and today's date is 5th May 2005, then #05/11/2005# is passed as the parameter) but I get the error data type mismatch. The column eventDates.date is a Date/Time column.
Can anyone help?
View 3 Replies
View Related
Sep 17, 2014
So I have a macro in excel which imports data from the excel sheet to a table in access db. Now the excel file has 4 columns which have dates.
- I imported the excel file from access via access so that I can get the heading of the table and the table is created. Then I deleted all the data in the table.
- When the table was imported 2 of the date columns got set as Short/text data type. Dont know why.
- Now, if I leave the data type as it is in Access table, my macro button in EXCEL works fine and imports the data to Access. If I change the data type, in access design, of the two data columns to date type, I get the type mismatch error when I run the import macro button in EXCEL. I am going nuts over this error. I even created a blank table in access and defined data types to all columns which would be imported from excel. but still excel macro button shows the same error.
I checked the format of all the four date columns is date.
I did a lot of hit and try and could it be the case that if access table fields are defined properly, but any of the data columns cells in excel sheet is null/empty, it will show the type mismatch error.
is it possible and is there a way, that once the data is imported to access, I can convert the value in the column from short text to date type.
View 5 Replies
View Related
Jul 31, 2005
Hi,
I have a query with a field defined in the query as follows:
Next Bill Date:
IIf(IsNull([dtmLastBillDate]),
DateSerial(Year([dtmDateRecd]),Month([dtmDateRecd])+1,15),
DateSerial(Year([dtmLastBillDate]),Month([dtmLastBillDate])+[lngNumMonths],15))
I can't seem to set any criteria for this field without getting an error:
'Data Type Mismatch in Criteria Expression'
Examples of criteria that I've tried:
=#1/1/2005#
>#1/1/2005#
=Date()
Year([Next Bill Date]) = Year(Now())
All of the above generate that same error.
{I've seen many pages/posts regarding 'data type mismatch' but none seem to relate directly to this situation.}
I could use some help, fast!
Thanks in advance,
David
View 1 Replies
View Related
Sep 17, 2014
So I have a macro in excel which imports data from the excel sheet to a table in access db. Now the excel file has 4 columns which have dates.
- I imported the excel file from access via access so that I can get the heading of the table and the table is created. Then I deleted all the data in the table.
- When the table was imported 2 of the date columns got set as Short/text data type. Dont know why.
- Now, if I leave the data type as it is in Access table, my macro button in EXCEL works fine and imports the data to Access. If I change the data type, in access design, of the two data columns to date type, I get the type mismatch error when I run the import macro button in EXCEL.
I am going nuts over this error. I even created a blank table in access and defined data types to all columns which would be imported from excel. but still excel macro button shows the same error.
I checked the format of all the four date columns is date.
I did a lot of hit and try and could it be the case that if access table fields are defined properly, but any of the data columns cells in excel sheet is null/empty, it will show the type mismatch error.
ALTERNATIVELY, is it possible and is there a way, that once the data is imported to access, I can convert the value in the column from short text to date type.
View 1 Replies
View Related
Dec 1, 2014
I've been trying to get a query to run but I keep the "type mismatch in expression" error message.It's the Invoice-Product Query in the attached file.I have tried changing the field types, the primary keys and messed around with the relationships but noting seems to work.
View 2 Replies
View Related
Aug 8, 2013
I am getting this error in a query. The field generating the error is a calculated field using a custom function.The function is:
Code:
Public Function DecimalTime(dblEvalTime As Double) As Double
DecimalTime = Hour(dblEvalTime)
DecimalTime = DecimalTime + (Minute(dblEvalTime) / 60)
DecimalTime = DecimalTime + ((Second(dblEvalTime) / 60) / 60)
DecimalTime = Round(DecimalTime, 2)
End Function
The dbalEvalTime parameter is passed in to the function as (DateIn+TimeIn)-(DateOut+TimeOut).
So the data type passed in is Double and the Function result is Double. The criteria i am applying in the query is simply <0.01. I have formatted the query field as #.00, 0.00 and General Number but it makes no difference.
I have also tried creating a second query using the first as its data source and applying the criteria in that query but still get the same error. Without the criteria the query runs fine.
View 12 Replies
View Related
Jul 17, 2014
I'm trying to create a query based on another query. However, my WHERE statement is causing a data type mismatch for a date. My code is:
Code:
SELECT id, status, updated, [previous renewal]
FROM qrynext renewal
WHERE status = "active" and [previous renewal] = date()
If I remove the " and [previous renewal] = date()" it works just fine. But even setting up [previous renewal] to equal #7/17/14# or "07/17/14" or anything else I've tried won't work. The field that it's based on is definitely a date field, but I don't know why it would cause a data type mismatch.
View 14 Replies
View Related
Mar 12, 2014
I have a form with Date of Death (DOD) field. I would like update DOD from a table dbo_patient into Z_Patients table.
I have set the datatype as Date/Time in the form for Date of Death.
Code:
Private Sub Update_DOD()
Dim rcMain As New ADODB.Recordset, rcLocalDOD As New ADODB.Recordset
Dim DOD As String
rcMain.Open "select distinct PatientKey from Z_Patients", CurrentProject.Connection
[Code] ....
However I am getting some error Run-time error '-2147217913 Date type mismatch in criteria expression in section below.
Code:
CurrentProject.Connection.Execute "update Z_MAIN_Processed_Patients set DateOfDeath = '" & rcLocalDOD!date_of_death & "' where PatientKey = " & !PatientKey
View 5 Replies
View Related
Oct 15, 2014
I'm in datasheet design view and I'm trying to change the data type of a cell and add a lookup. When I try to change the datatype I get an error which says I need to remove a relationship first - except I did. I deleted all the relationships, saved and closed the relationship view and closed and reopened the table.
View 6 Replies
View Related
Apr 23, 2007
There is a end_date column record with date/time datatype, how could i query datat that showing the particular is empty.
I try end_date = NULL, no record is showing and end_date = ' ' , datatype mismatch... so which one should i write?
View 3 Replies
View Related
Apr 18, 2013
I'm a having a problem with a Yes/No datatype. Fundamentally, my code looks like this:
strSQL = "SELECT * FROM tblAddresses " & _
" WHERE YPID = " & Me.Parent.IDNUMBER & " AND CurrentAddress = yes"
Set rs = db.OpenRecordset(strSQL)
Now this statement returns 3 records even though only 1 Current Address exists.
false also returns 3 records
true also returns 3 records
no also returns 3 records
-1 also returns 3 records
0 also returns 3 records
1 RETURNS 0 records!!
If I look at the table in Access, I only have 1 CurrentAddress record for my IDNumber.
View 1 Replies
View Related
Feb 25, 2005
Hi I'm doing some work on an open source intranet for a friend and I've come unstuck with data types I guess.
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'str'
D:SITESEXTRANETCLIENTS../includes/connection_open.asp, line 104
I added a date field and now get this error.
The process is as follows:
add user - client-add.asp
client-add-processor.asp (& siteSQL.asp include)
the error occours on submiting the original form page
new feilds:
Code:<form method="post" action="client-add-processor.asp" name="strForm" id="strForm">..............edited...............<tr><td><b class="bolddark"><%=dictLanguage("HostingPeriod")%>:</b></td><td><input name="HostingPeriod" size="20" value="<%=Session("HostingPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','HostingPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr><tr><td><b class="bolddark"><%=dictLanguage("DomainPeriod")%>:</b></td><td><input name="DomainPeriod" size="20" value="<%=Session("DomainPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','DomainPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr>
To client-add-processor.asp
Code:sql = sql_UpdateClient( _session("Name"), _session("Rep"), _session("Client_Since"), _session("Standard_Rate"), _session("Address1"), _session("Address2"), _session("City_State_Zip"), _session("LiveSite_URL"), _session("DevSite_URL"), _session("Contact_Name"), _session("Contact_Phone"), _session("Contact_Email"), _session("Contact2_Name"), _session("Contact2_Phone"), _session("Contact2_Email"), _Active, _session("client_id"), _session("ClientFolder"), _session("HostingPeriod"), _session("DomainPeriod"), _session("Notes"), _session("WebFolder"))'response.write(sql)Call DoSQL(sql)%><!--#include file="../includes/main_page_open.asp"-->
includes/main_page_open.asp
Code:Function MediumDate(str) Dim aDay Dim aMonth Dim aYear aDay = Day(str) -line 104 'aMonth = Monthname(Month(str),TRUE) aMonth = Month(str) Select Case aMonthCase 1aMonth = "Jan"Case 2aMonth = "Feb"Case 3aMonth = "Mar"Case 4aMonth = "Apr"
SQL
Code:Function sql_InsertClient(Client_Name,Rep_ID,Active,Client_ Since,Standard_Rate,Address1,Address2, _City_State_Zip,LiveSite_URL,Devsite_URL,Contact_Na me,Contact_Phone,Contact_Email,Contact2_Name, _Contact2_Phone,Contact2_Email,HostingPeriod,Domain Period,Notes)dim sqlsql = "INSERT into tbl_clients (client_name,rep_id,active,client_since,standard_r ate,address1," & _"address2,city_state_zip,livesite_url,devsite_url,c ontact_name,contact_phone,contact_email,contact2_n ame," & _"contact2_phone,contact2_email,hostingperiod,domain period,notes) VALUES (" & _"'" & Client_Name & "'," & _Rep_id & "," & _Active & "," & _"" & DB_DATEDELIMITER & MediumDate(Client_Since) & DB_DATEDELIMITER & "," & _Standard_Rate & "," & _"'" & Address1 & "'," & _"'" & Address2 & "'," & _"'" & City_State_Zip & "'," & _"'" & LiveSite_URL & "'," & _"'" & DevSite_URL & "'," & _"'" & Contact_Name & "'," & _"'" & Contact_Phone & "'," & _"'" & Contact_Email & "'," & _"'" & Contact2_Name & "'," & _"'" & Contact2_Phone & "'," & _"'" & Contact2_Email & "'," & _"" & DB_DATEDELIMITER & MediumDate(HostingPeriod) & DB_DATEDELIMITER & "," & _"" & DB_DATEDELIMITER & MediumDate(DomainPeriod) & DB_DATEDELIMITER & "," & _"'" & Notes & "')"sql_InsertClient = sqlend Function
Thanks in advance for any pointers.
View 3 Replies
View Related
Apr 12, 2006
I don't understand why I'm getting this message.
I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.
I don't understand why Access is not returning the 3022 duplicate entry error.
When I click "debug" Access highlights the line as shown below:
Err_bSave_Click:
If Err = 2046 Then 'The command or action Undo is not available now
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bSave_Click
End If
End Sub
Any and all assistance is appreciated.
Randy
View 6 Replies
View Related
Jun 15, 2006
I am trying to do a basic query and I keep getting a "Type Mismatch" error and the query will not run. If I only do a query on one table, it works no problem so I know it must be related to my Join between tables.
For the two tables that are joined (it is one-to-many)- the first table is a clients table and I created a field called ClientNumber that is an AutoNumber. The second table is called TrainingRequests. This will store the training requests for each client and each client can have multiple training requests. I created a field called ClientNumber in it as well (this is what field I linked the tables by). But I set it to text instead of AutoNumber.
Is there a way to do a query with the two tables? Or will I have to change something in table design? I already have some data in the tables so I am not sure what direction to take.
Thanks for any help someone can provide. It would be greatly appreciated.
View 1 Replies
View Related
Feb 15, 2005
Can someone please help with the following:
Dim strX As Variant
strX = DLookup("State", "TblScheduleK12004", "[PartnerID] = '" & Forms!FrmPrintRpt!cboClient & "'" And "[SetNum] = " & Forms!frmPrintRpt!txtSet)
[PartnerID] is a text field
[SetNum] = is a number field
I can get it to work with the Partner ID OR the SetNum but keep getting the error when I add the "AND" to include both.
View 2 Replies
View Related
Jan 26, 2006
Hi
I am getting the following error when I try to present some information from a database:
Microsoft JET Database Engine error '80040e07'
Data type mismatch in criteria expression.
/tribute2.asp, line 168
The code relating to this is:
The error line it is talking about is:
Code:rsGuestbook.Open SQLstr, adocon
Code: <%Dim adoCon 'Holds the Database Connection ObjectDim rsGuestbook'Holds the recordset for the records in the databaseDim SQLstr'Holds the SQL query for the databaseSet adoCon = Server.CreateObject("ADODB.Connection")adoCon.Open = "PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=c:inetpubftprootlocalusericlay
emember ing.co.nzdb
emembering.mdb;"strcustomerID = Request.QueryString("remID")Set rsGuestbook = Server.CreateObject("ADODB.Recordset") sqlstr = "select * from guestbook where guestbook.mid =" & strcustomeridrsGuestbook.Open SQLstr, adoconDo While not rsGuestbook.EOF'Write the HTML to display the current record in the recordsetResponse.Write ("<font face='Arial' size='2' color='#000080'><i>A tribute provided by ")Response.Write (rsGuestbook("confirstname"))Response.Write (" ")Response.Write (rsGuestbook("conlastname"))Response.Write ("</i></font><font face='Arial' size='1' color='#000080'><i> ")Response.Write (rsGuestbook("conrelationship"))Response.Write ("</i></font><br><br>")Response.Write (rsGuestbook("conmessage"))Response.Write ("<br>")'Move to the next record in the recordsetrsGuestbook.MoveNextLoop'Reset server objectsrsGuestbook.CloseSet rsGuestbook = NothingSet adoCon = Nothing%>
Can anyone see where I have gone wrong ... could it be something to do with the fact that 'remid' relates to another table in the database. Though when I did a reponse write on the sqlstr it is presenting the remid.
Hope this doesn't sound to confusing.
View 8 Replies
View Related
Jul 15, 2015
I am getting a "type mismatch 13" error on this line
Code:
PrinterSel = Nz(DLookup("Device", "tblPrinterSelection", "Doc='" & DocumentType & "'" And "Computer='" & sHostName & "'"), "No Printer")
All vba variables are defined as strings. All fields in the table are text.
mafhobb
View 2 Replies
View Related
Jul 18, 2006
Could someone please help. I am in a serious time crunch and cannot figure out what I have done wrong. I have copied the module attached for the audit trail and have implemented it into my database. For some reason when I go to run the BeforeUpdate event I get a 13-Type Mismatch error. I have found a fix that will allow me to use the code without flagging an error, but I am not sure it is working properly now. Here is the fix.
1. Pass the form as an argument of the function
Function AuditTrail(frm as Form)
2. Comment out these lines in the code
'Dim frm as Form
'Set frm=Screen.ActiveForm
3. Call the function in the BeforeUpdate event of the form and or subform as follows:
Call AuditTrail(Me)
Many thanks,
CB
View 4 Replies
View Related
Mar 17, 2014
common error in VBA imports. It has happened with spreadsheets and text files I have users importing. An error message pops up "Type Mismatch." But the import appears to work correctly. So I added code that On Error, if error Like "*Type mismatch*" continue to next step. Now the user gets a longer error message: "The expression On Click entered as the event property setting produced the following error: Type mismatch." Again, the import still works, but this message is annoying! The even stranger thing is that I do not get this error message on my machine. Just the other users.
View 4 Replies
View Related