How do I capture data in a field (one record) to be used in a query.I have a query with [Unit] as a criteria. I want to capture the unit info in a field then have it used in the query.
View RepliesI have a query which exports to a excel file afterwards, however, it's not capturing all the data I need.My query is at the bottom, and I think the problem is the "(([tbl Master].ID)=[tblRequest].[Cost Centre]))" statement, as this means that it'll never pick up a Cost Centre starting with "Z", as they don't exist in [tbl Master] (they're exceptions to the rule basically).
What I need to do is only parse the statement "(([tbl Master].ID)=[tblRequest].[Cost Centre]))" if the Cost Centre doesn't start with "Z", if it does, then it'll find it in the table, as there's validation on the point of entry that don't start with it.
Code:
SELECT tblRequest.RequestID, 'N/A' AS [Week No], tblRequest.[Refund Date] AS [Date],
tblRequest.Requester, tblRequest.Authoriser, tblRequest.Refunder AS Processor,
tblRequest.[CRIS Reference] AS [CRIS Ref No], tblRequest.[Customer Title] & ' ' & [Customer Name] AS [Customer's Name],
[code]....
Need a formula which can capture filename for me. For example, I have a db saved at "C:DlocationofficeChina.accdb". Is there a way to capture "China" in a query?
View 2 Replies View RelatedI have set up a standard form using asp code, the data currently get emailed to the address i requested, i also need this data to go in a database. any tips.
thanks in advance.
JR
I have two tables that are joined - called A and B. A has two fields, "PLACE" and "RAND" and is joined to B via field "RAND". Other than "RAND", B has several fields named 01 TOTAL, 02 TOTAL, 03 TOTAL, etc...for about 60 fields.
The "PLACE" field in table A has data that is 01, 02, 03, ect.... How do I structure a query so that whatever "PLACE" is, I can match the XX TOTAL value? In other words, i need to have the query field header be somehow dependent on the value in "PLACE".
Is this even possible?
i was told that i didnt need to store the string value day.. eg.. monday.. tuesday.. because access can retreive the day based on the date..so...i have a textbox on my form that displays the date as follows..23/12/2006i am basically creating a html email and at the moment i use the following.. Option Compare DatabasePrivate Sub Command254_Click()'References: Oulook LibraryDim strEmail, strSubject As String, strBody As StringDim objOutlook As Outlook.ApplicationDim objEmail As Outlook.MailItemSet objOutlook = CreateObject("Outlook.application")Set objEmail = objOutlook.CreateItem(olMailItem)strEmail = Me.txtbookeremailstrBody = "<!DOCTYPE HTML PUBLIC '-//W3C//DTD HTML 4.01//EN' 'http://www.w3.org/TR/html4/strict.dtd'><html><head>" & _"<meta http-equiv='Content-Language' content='en-gb'><meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'></head><body>" & _"<p>" & Me.txtjobdate & "</p></body></html>"strSubject = "London Heathrow Cars - Booking Confirmation"With objEmail .To = strEmail .Subject = strSubject .HTMLBody = strBody '.Send 'Will cause warning message .DisplayEnd WithSet objEmail = NothingEnd Subthe email displays the date as it stands in the textbox..is there a standard method in access i can use to convert..23/12/2006 to Saturday 23rd December 2006??
View 12 Replies View RelatedHi,
I am nearing the endgame of a FE/BE app. The FE will sit on various PC's across a LAN. IS there a way that when a user opens a record (via a form) on his FE (on his PC), the IP addy of that PC will be automatically entered into a hidden field on the form and store it in a purpose specific field on the BE table.
So I guess my question is how do I get the IP into a field on a table? Either "default" in the table, or via a field on a form? And what would the syntax for such an auto-populate be?
Thanks
Brian
Pretoria
South Africa
Hi!
How do I write this in the criteria box?
Thanks for your help!!!!
In a query, I have the following data. If a number has more than six digits, I need to parse past the fifth digit and that becomes a new field. If it has five or fewer digits, no record is entered into Column2. For example:
Column1 Column2
12345
54321
123456 6
12345678 678
123
9876541 41
6
What simple code does it take to perform this in a query?
I have data in a field and I want to write a query to return all the values except the ones that have 2014/* in them. So I want to see the blank ones as well as the one with 2013. So I basically want to return B, C, D, E, F, G, H, J, K, L.
I tried the NOT LIKE function but couldn't get it to work.
Why does my query return the PK results instead of the field data?
Really new at this but all my other queries work properly...
I need to know when:
* a new record has been created
* data on a record has been changed
Does the On Dirty event capture this, or can I just use the forms On Change event?
I have three tables. TableA contains certain order information, such as the username of the employee, type of order, alias number, etc. TableB contains phone numbers, username of the employee, etc. TableC contains supervisor names and alias numbers.I didn't make these tables but that's what I'm working with. I connected TableA to TableB with the username of the employee, and then TableA to TableC using the alias numbers.
I have a report that summarizes how many orders of each type there are. It shows the supervisor, employee username, alias numbers and then each type of order with the amount of orders of each type under the headers.My boss wants to be able to click on the amount of that type of order and have it show him the details for those orders. This is where my problem is.
I was able to use an Inner Join type of query that allows me to filter the data by order type (however, I have to make a new query for each order type since I'm not too experienced on this). The problem is that I cannot find a way to have a query filter the data by order type AND employee username, so that it only displays the orders taken by a certain employee and it only contains one order type at a time, depending on which order type you clicked.
Is it possible for an update query to simply replace all the data in a table's field with the results from a query?
For example, I have Table A with the field Years. This table performs various calculations within based on the field Years.
I would like an update query that simply replaces the Years field data in Table A with a new set of years based on a query's search criteria.
When I run the below query, I get an error saying the query must be updateable- but Im not trying to update the query, rather the Table
I've attached a photo ......
I want to set a table field's default value to whatever is displayed in a certain field on a certain form at the time.In other words, say I have a database with a table called TABLE1, and two fields called NAME and SCHEDULENUMBER. I have a form called CreateSchedule with a SCHEDULE NUMBERCONTROL form and a NAME form, and I can enter names onto it, and it records to the proper SCHEDULENUMBER. So if I pull up SCHEDULENUMBER 4, and add three names, when I go back into TABLE1, I can see those three new names, and each one has the SCHEDULENUMBER set to 4.
What I'm trying to do is write an APPEND QUERY to copy a list of names from a different table, and paste them into TABLE1. The problem is that the other table doesn't have a SCHEDULENUMBER field. What I want to do is put a button on the CreateSchedule form that runs an APPEND QUERY, and sets the SCHEDULENUMBER to whatever value is displayed on CreateSchedule's SCHEDULENUMBERCONTROL field.
I tried setting a default value in TABLE1's field properties for that SCHEDULENUMBERCONTROL field, but I keep getting error messages. I just want TABLE1, whenever I add a new record (regardless of how I add the record: manually typing it or clicking the append query button) to look at the form CreateSchedule, and set it's own SCHEDULENUMBER field to whatever is displayed in CreateSchedule's SCHEDULENUMBERCONTROL form.
I am trying, and failing quite spectacularly to create a single query that will contain multiple expressions on the same field.
Please see attached jpg for example.
SQL: SELECT Count(StockData.status) AS FaultyPCs
FROM StockData
HAVING (([StockData].[Status] In ("Waiting Repair") And [StockData].[DeviceType] In ("Thick PC")));
What I want to be able to do is then add additional expressions to filter and count in the same way for "Thin PC" "Thin Laptops" "Thick Laptops" and so on.
But when I add one of these expressions to the next column in the builder, it seems to apply itself to the expression to it's left, causing that one to now give a result of 0.
Is there a way of separating one from another or do I have to create a separate query for each expression and then use another query to pull them all together (as I have done in another situations - but this will involve creating probably 20 separate queries.
I'm having difficulty with the syntax in this query to remove duplicate data for the field "StocktransID".
Code:
SELECT DISTINCT tblStockTrans.StockTransID, tblItem.Brand, tblItem.Category, tblItem.SubCategory,
tblItem.Model, tblItem.Description, IIf(TransTypeID=3,Quantity*-1,Quantity) AS Qty,
tblTransaction.TranstypeID, tblItem.ItemID, tblTransaction.TransactionID, tblItem.ItemType,
tblItem.Origin, tblOption.ParentID
[code]...
Created a new Query (called qry_Temp) from and existing Query (qry_Test that has fields Field1 - Field5) using QueryDef , and inserted a new Field (FieldX) into it (see example below) using the .Parameters property, then opened a Recordset based on the new Query in order to attempt to enter data values into the new Field (FieldX) for each record in the query - but cannot assign any data values to this new Field (but can to the existing fields) in the new Query?
Dim DB As Database
Dim rs As DAO.Recordset
Dim qdfNew As QueryDef
Dim strSQL1 As String
Dim strSQL2 As String
Dim Value1 As Integer
[Code] ....
i need to Concatenate a fields data into one cell in a query according to linked table ID....
View 3 Replies View RelatedI have a stored query in my db. The query gets the recordcount of all the items in a table.
In my VBA, rather than code a new db conection, set a recordset etc, I want to execute the query using DoCmd
=======
DoCmd.OpenQuery stDocName, acNormal, acEdit
=======
The above line displays the results of the query.
What I really want is to run the query and store the recordCount in a variable - without displaying the results.
Can this be done?
Thanks all
Hello everyone,
Simply put, I want to create a form to which I can enter a raw SQL statement (such as: SELECT * FROM contacts without having to create a new Access query.
The way i have tried to do this is by creating a form which uses an onclick function to pass the string variable (the query statement) to a sencond form and have the second form run the statement. I can pass the variable ok but I cant figure out how to the use the variable string in the second form to execute as the "Record Source" of the form.
Any ideas?
Thanks,
Curveo
I am trying to construct a crosstab that averages a calculated field from a previous query. It is returning a "Data Type Mismatch" message.
The field I am trying to average is a subtraction of dates to find total days. I assume my field is not a number so I have tried to wrap it in CDbl() to change the type.
The formula is
Code:
CASE_DAYS: CDbl(IIf([Actual Close Date]-[Creation Date]>=0,[Actual Close Date]-[Creation Date],""))
How Mark disappear field data based on field data last.
Example:I have a field type in the name and on behalf of another field No.
In the case of the Type-B data is deleted Number field, which is before the character.
Background I have a query (Q1) that retrives data from a table (Table 1). One of the fields in Table (F1) contains both text and numeric data (ie: 24 eggs). I want to separate these values in Q1.
Questions
How can i in Q1 retrive only numeric data from F1 and display that data i a field?
How can i in Q1 retrive only text from F1 and display that data i a field?
I have a query called "Stock" containing field like (Item, Description, product_qty)
Another is a table called "Sales" with fields like (Sales_ID, Item, Sales_description, sales_Qty, date_Of_Sale) Item field on sales is a foreign key.
Now what i want is how can i make when the user enters new record, in field "Sales_Qty" the data entered here to be less than product_Qty.
NB; this is because you can not sell more than what you have.
I would like to filter data from a table using a query (from an data input form). The objective is to output all results if input form field is empty and to output results higher or equal to the type in the field if field is not Null. The query code is as follows:
IIf(IsNull([Forms]![Form2]![MaxDiffInput]);[Maximum operational pressure (bar)];[Maximum operational pressure (bar)]>=[Forms]![Form2]![MaxDiffInput])
However, is not providing any result when the input field (MaxDiffInput) as a value.