I have a table called estimates and a field in that report is called RFA and this is a checkbox. How can i open a report i created (called EReport) for all rhe records in this table that have the RFA field checked (therefore true).
View RepliesI have the following code
SELECT Count(T_STUDENTS.studentsID) AS res1yes, T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup
FROM T_STUDENTS, T_COACHING
WHERE (((T_STUDENTS.res_vrijstelling)=False) And ((T_STUDENTS.stud_year)="1") And ((T_STUDENTS.stud_coach)=forms!F_cboCOACHING!cboCOACHING))
GROUP BY T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup;
It runs fine, untill the moment the count is 0. At that point it breaks the form. How can i tell access to deal with this? Somehow i need to replace the count result with 0 if there are no records that meet the criteria.
I have a main form with 3 subforms. Each subform is identical except for the value of the filter property. The filter is for the same field, but with a different value for each subform. So, for example, the first subform has a filter of:
Code:
[WBS Element]="DEF" And [Period]=Forms!frm_ProjectFinancials!Period
while the second subform has a filter of:
Code:
[WBS Element]="PPE" And [Period]=Forms!frm_ProjectFinancials!Period
and the third subform has a filter of:
Code:
[WBS Element]="EXP" And [Period]=Forms!frm_ProjectFinancials!Period
The recordset for each subform results in a single record with numeric values in each field or no records at all. When the resulting recordset is empty (no records), the bound text fields on the subform display as blank. I want these fields to display 0 instead of blank so I can use them in other calculated fields. Functions such as Nz or IsNumeric do not work since there are no records and the values are neither null nor numeric.
How I can display zeroes in the bound fields when no records exist that meet the filter criteria? Or is there a way that I can dummy a resulting recordset to have all zero values when there would otherwise be no records?
Hi, here is my query:
SELECT DISTINCT tblvisit.[Pen ID]
FROM tblvisit
WHERE (((tblvisit.[Visit Date From])<=[forms]![fRMBOOKINGAVAILABILITY]![From]) AND ((tblvisit.[Visit Date To])>=[forms]![FRMBOOKINGAVAILABILITY]![To])) OR (((tblvisit.[Visit Date From]) Between [forms]![FRMBOOKINGAVAILABILITY]![From] And [forms]![FRMBOOKINGAVAILABILITY]![to])) OR (((tblvisit.[Visit Date To]) Between [forms]![FRMBOOKINGAVAILABILITY]![From] And [forms]![FRMBOOKINGAVAILABILITY]![to]));
This successfully finds booked pens in a cattery. How though, can I get to see the pens that are free? Is there a feature that will allow me to conduct this query before conudcting another one to show the values which didn't appear? Thanks:D
I have a report based on a query and in that report I added a text box to be yes or no depending on 1) the number of days to complete and 2) the type of urgency. There's 3 different urgency levels so I was trying to create iif statements based on each one with the corresponding days using the OR operator between them like below:
=IIf([t_Days]<=2 And [Urgency Level]="Expedite (1-2 days)","Yes","No")_
Or IIf([t_Days]<=7 And [Urgency Level]="Normal (5-7 days)","Yes","No")_
Or IIf([t_Days]<=30 And [Urgency Level]="Low (14-30 days)","Yes","No")
Any 1 of those by themselves works fine but I need it based on all of that. So with that said, is there a way to do this? I tried using VBA code, but I think with the type of report I'm running that that wont work. It has a repetitive one line detail section with the data I'm trying to view.
I have a text box with the following statement:
Summary detail: Sum(IIf([dacthc]=0,Null,Fix(100*[dqty]*([dstdhc]*[drate]/[dacthc]-[drate]))/100))
My question is, if it meets the criteria, is it possible to make it default to a "0" in the field.
Been experimenting on some code to prevent deletion or changes to records that meet certain conditions.
The problem I am having is the code is contradicting each other preventing some of the records to be locked down.
Code:
Private Sub Form_Current()
'Code 1 - Prevent edits if 21 day period has lapsed
If TestDate2(Me.txtStartedHidden) > 0 Then
MsgBox "Editing NOT allowed - 21 day time period has been reached"
Me.txtBasic.Locked = True
[Code] ....
Rules are:
Edits allowed if invoice date not reached
Edits allowed if within 21 day but NOT if invoice date is reached
Edits prevented if invoiced date reached and if records still within 21 days
Edits prevented if invoiced date reached & records past 21 days
I have one form which have two multiselect listboxes. They work, but every time when I choose id_organizacija from listbox popup enter parameter value comes up.
I am already tried to put id_organizacija in [ ] but that didnt solve problem.
Code:
Set ctl = Me.lstEmployees
For Each varItem In ctl.ItemsSelected
strWhere = strWhere & ctl.ItemData(varItem) & ","
Next varItem
Set ctl = Me.lstOrganizacija
[Code] ....
What I want to do is set the criteria of a query to the value on a form if the form is open, and set it to a different value if the form is closed. I tried using a function on the OnLoad event of the form to set a variable called IsOpen to 1 if the form is open, and reset that variable to 0 when the form closes, but when I tried using the variable in an IIF statement in the query criteria, I got a "Its too complex" error.
Here's what I really want to do. I have a very complex form with multiple tabs and subforms. The subforms populate based on a query of what is selected and loaded into a textbox control on the first tab of the form. The first tab has a subform that is based on the main table. Rather than recreate that form, I want to copy it and change the rowsource on the first tab to a subset of the main table, and tell the query to use the textbox on the new form so I don't have to go and replicate all the other subforms. Is there a way to do that or am I just screwed?
I have a database as follows: Date1 Name Issue Action_Item1 Status1 Action_Item2 Status2 .....
with up to 5 max action items/status; where Status is a checkbox.I ONLY want the report to return records where there is text in an action_Item input AND the corresponding status is FALSE. The issue I'm having is that there may be ACtion_Item inputs withOUT text; so I can't simply query the Status checkbox for false.how to get started.
I have a report that is a summary of multiple records in it. What I have next to the record on the report is a button.I have report that are labeled:
rptIncident Summary
rptIncident Report
and a button labeled
"open report"
I would like to click on the button and then it open the rptIncident Report with all the information, not just the summary. I will put a picture so you know what I am trying to accomplish.Is this a simple Onclick event with a where condition or what? Or does this go beyond to having something to do with VBA?
I have a simple report which i open from a navigation form, i have a textbox in the report i wish to use as criteria, on start the report will be blank until i enter a name into the textbox and requery. However im not sure how to link this and how to stop access asking for this information before the report is opened?
View 5 Replies View RelatedI have a form. On the form I have a button to run a report.The query associated with the report selects all records within a unit (field name (Unit) is used as the selection criteria).Rather than type in the unit name when the report is run, I want to select the unit that is currently shown on the form.
View 4 Replies View RelatedI have a form which runs specific queries and opens a report using combo boxes, these work perfectly fine if I just try to run them in the form. I have put the form into a navigation form and if I try to run the same query I get parameter queries popping up instead of just running the query and opening the report.
View 2 Replies View RelatedThe main table for the database I am working on contains the following fields:
ID
Mfr Control Number
Initial or Follow-Up
Follow-up Number
Suspect
Date of Initial Email
Date Received
Date Submitted
Date of Report
Serious
Brief Description
Causality
Notes
With some additional qualifications I wanted to find records that had an intial report but no follow-up. Which translates too I want records that are unique in the Mfr Control Number field (no duplicates).
I am trying to build a query and keep getting hung up on the unique aspect of fields. I started by trying to query only "Mfr Control Number" fields that are unique (no duplicates). As best I can figure for some reason I can not add any additional fields to that query. My current query is set up in the query build table such that I have added "Mfr Control Number" in two columns. The first column in Total I have "Group By". In the next column I have set Total to "count" with a criteria of 1. If I try to add any other fields from my table than I seem to lose those unique results. But I need to further filter to get the exact information I need.
I want criteria on the "Initial or Follow-up" field to only bring "initial"
I want criteria on the "Serious" field to only bring "serious"
I want criteria on the "Date of This Report" field of "<Date()-"15""
Is there some way to take the results of that initial query to then build a another query based just on those records? I could then apply the further criteria and run my report. Or is there a way to do this in one step?
I've tried to make clear my intention but know it can be difficult to get this kind of stuff down in writing in a clear fashion. I have to be careful to keep information confidential also so some of the details are vague.
All using access 2010. I have a query1, query2 and query3. Query1 is my master. Query2 and Query3 was created based on different criteria but derived from the Query1. I now want to exclude the records from Query1 that are in Query2 and Query3. When I try to put isnull in criteria of both queries Im trying to exclude; instead of returning the remainder records in the master I get none.
View 3 Replies View RelatedI have a query that uses the input from a form as criteria, which is then used in a report. The form input is a drop down based on another table. This is a sales pipeline report, and the list is a list of sales people. The report works perfect for all sales people except one. When I run it for the one, I get the following error:
"This expression is is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables".
I DO NOT get the same error when running the query by itself - so assuming there is something in the report causing this. I do have some sum formulas in the report.
Again, no other salespersons selected cause this error -- so I am assuming there is something in the dataset for this person that is causing the error.
i made a query to display students results after an exam. there are 12 subjects but a student chooses 8 from that. After an exam, the results are keyed in and a result slip is printed later. The problem is that the result slip displays all subjects including those not done by the student. I typed a criteria >0 in one of the fields and no records appeared. Is there a way that i can use to display only the subjects chosen and marks attained by a student and leave out the rest?
View 1 Replies View RelatedI want to run a query on a table that holds all speed information for our trucks imported from a third party. Some of the speed alerts in that table are not correct so we set up a second table managed by the users to enter a speed exception. So if we know that Main St in Dallas TX generates false alerts for speeding we know not to call the driver, the third party db speed limit is not up to date.
So I want my query to pull all the speed data from tblSpeedData, except leave out the records where the street and zip are listed in the tblSpeedExceptions.
I am trying to create a delete query that, for a given person, deletes records in Table B that do not have a corresponding record in Table A.
Here are the relevant tables:
tblStates holds StateID, StateName, and RegionID (RegionID is a FK to tblRegions).
tblPeopleStates is a junction table between tblPeople and tblStates.
It lists states assigned to people. It has 3 fields: PersonStateID, PersonID, StateID.
tblPeopleRegions is a junction table between tblPeople and tblRegions.
It lists regions assigned to people. It has 3 fields: PersonRegionID, PersonID, RegionID.
For a given PersonID, I need to delete records (i.e., states) in tblPeopleStates whose RegionID is *not* in tblPeopleRegions.
For example, pretend that tblStates shows that State IDs 1, 5, and 6 are all in Region ID (i.e., all have a RegionID = 10).
If Joe (PersonID = 200) has StateIDs 1, 5, and 6 in tblPeopleStates, but doesn't have a record for RegionID = 10 in tblPeopleRegions, I need to delete his three records in tblPeopleStates (i.e., the ones where StateID = 1, 5, and 6).
PersonID will be found on [Forms]![frmMain]![subform1].[Form]![subform2].Form]![PersonID]
All. Using access 2010. I have a query that returns 92 records. When I put in the criteria for one field to leave out records with “approved” which totals to 9 records, the query only returns 10 records. It is not returning the records that are blank(not null) for that field. I want those records. Why is this happening and how can I get the blanks for this query?
View 2 Replies View RelatedI've got a table with 23 columns. Column 1 is the ID row which has a unique client ID in it. Then we've got a column called 1st_Reason and one that goes with it called 1st_Transfer_Date. This pair repeats for 2 through 10. Each of the Reason columns can have a set value, for example "First Processor".
What I need to do is create a date with months on the Y axis and the 5 different reasons on the X axis. I need to count the number of "First Processor" across all 10 Reason columns for each month. I would need to repeat that for each other reason type, but if I can get one to work I can simply change the reason type.
I'm pretty new at Access queries so I don't know how to use a count statement to pull from all those queries AND get the corresponding date to be in range.
We have the following table.
Code:
ID studentname lectureplace lecturesubject
1 jack A Biology
2 steve A politics
3 jack B math
4 steve A math
5 jack B politics
6 joe A politics
. . . .
. . . .
154 Jane B Geography
We need a query to implement two criteria to extract the following records:
1-Show lectureplace A AND politics lecturesubject
2-Show only those with lectureplace B regardless of the subject
In case the query is run we will have the following result:
Code:
ID studentname lectureplace lecturesubject
2 steve A politics
3 jack B math
5 jack B politics
6 joe A politics
I need for Access only to sum the "hours worked" of my payroll data, only if another field, "pay code" meets a certain criteria.
In Payroll, some codes are used to designate actual hours worked like REG (Regular Hours) and like OTS (Overtime Straight) while other codes are added as "premiums" to these hours and do not mean that you actually worked those hours, like OTP and HOD (Overtime Premium & Holiday Premium). The hours are only added as a reference to the actual hours worked they are attached to. Their units should not be counted as hours worked.
I want Access to 1) Group By Cost Center, 2) Sum "Hours Paid" that are tied to a REG or OTS (only), but 3)Sum the Earnings for all pay types.
Basically, (in excel-like terms: Hours Paid Column= SUMIF of Paycode = REG OR OTS. But Earnings Amount Column= Sum of all Paycodes)
Cost Center
Job Type
Hours Paid
Pay Code
Earnings Amount
20530
Security Guard II
7.5
REG
190.37
[Code] .....
How do you write a MS Access query criteria that looks for records like the current year only for a date field ? I tired Like *Year(Now()), it did not work.
View 8 Replies View RelatedI'm creating a query from one table using two fields that require certain records to NOT bring up records that have the following text:
One table, two fields
First field ECO LifeCycle Status Criteria is Not "ERP UPDATE" or "CANCELLED"
Second field ECR LifeCycle Status Criteria is Not "COMPLETE"
When I put the Not Criteria in the first field only I get a result.
When I put the Not Criteria in both fields I get no results.