Queries :: How To Refer To Parameters In Navigation Forms In A Query
May 20, 2013
I did a query which parameter is written in a text box - tprj. This text box is in a form, which is in a navigation control, which is within another navigation control. How can I refer, in the query, to this text box?
The navigation forms are nmain which contains nprojects.
nmainsub and nconsultprojects are the navigation subforms
fprjconsult is a normal form, which is inside nconsultproject
I tried the following criteria:
[Forms]![Nmain].[form]![nmainsub].[form]![nprojects].[form]![nconsultprojects].[form]![fprjconsult].[form].[text4]
And
[Forms]![Nmain].[form]![nmainsub]![nprojects].[form]![nconsultprojects]![fprjconsult].[form].[text4]
And
[Forms]![nmainsub]![nconsultprojects]![fprjconsult].[form].[text4]
And
[Forms]![Nmain]![nmainsub]![nprojects]![nconsultprojects]![fprjconsult].[form].[text4]
And other forms too but I can't get it right.how to refer to forms inside navigation forms, inside navigation forms, in SQL? What are the rules for writing it clearly?
View Replies
ADVERTISEMENT
Jun 6, 2013
There is a command button on my form that calls a filtered query. I'm filtering the query based on a combo box within the form using
[Forms]![frmAssignDwgs]![Combo15]
It works beautifully until I put the form as a subform in the Navigation Form I'm using. When I execute it from within the Navigation form, it errors out looking for [Forms]![frmAssignDwgs]![Combo15].
Is there another syntax I can use so this will still work from within the Navigation Form? Or another way to approach this functionality?
frmNavigation is the main navigation form
frmAssignDwgToPkgs is the subform that holds Combo15
I found another thread (which I can't link to since I'm new) and tried various arrangements of the following to no avail.
[Forms]![frmNavigation]![NavigationSubform] .[Forms]![frmAssignDwgToPkgs]![Combo15]
View 3 Replies
View Related
Aug 4, 2014
I have a navigation form that will have 6-8 tabs. We were using about that many databases, but we are finally consolidating them into one. The result of us using so many databases has been the multitude of forms and reports that were necessary for each database prior to merging them together.
The problem: There will be anywhere from 12-20 (text boxes) that the user can use to search anything in our database. What we need to have happen, if possible, is for those search parameters to show up in the header of our report if they have text in them. If the text box is blank, it should not show up in the header of the report.
I have read how to to do the start/end date technique, but I do not know if that would work for what we are doing since the boxes would only show up if they are populated by the user.
View 4 Replies
View Related
Mar 28, 2014
I have 3 forms that all use the same sub form. The 3 main forms show 3 different project types, where the sub form shows what other projects that a company is engaged with. Rather than create 3 different queries for my sub form, i would like to just filter it using criteria that looks at the CompanyID field on my 3 main forms. Currently my criteria is like this:
[Forms]![frmProjects_Detail_IND]![txtcompanyid] Or Like [Forms]![frmProjects_Detail_CSS]![txtcompanyid] Or Like [Forms]![frmProjects_Detail_TAP]![txtcompanyid]
Is there a way to ignore the parameters that are null?
View 3 Replies
View Related
Mar 29, 2015
I'm trying to refer to previous record in a query and i'm stuck as i do not know how to do it.
Here is my query:
Code:
SELECT
[Prod2Buy].[Product Code],
IIF([Missing] IS NULL,0,[Prod2Buy].[Quantity To Order]-[To Order]) AS [Rest To Order],
s.s_manu_code AS [Manufacturer Code],
s.prod_cost AS [Price Code],
[Code] ....
In fact the line: IIF([Missing] IS NULL,0,[Prod2Buy].[Quantity To Order]-[To Order]) AS [Rest To Order] should refer to previous record.
View 9 Replies
View Related
Dec 1, 2013
I have a query that pulls information from two tables. Some of the fields that are being queried share the same name in the tables, [Reimbursed_Amount] and [Cancel_Fee] specifically. In Design View I have specified that I only want the query to pull these fields from the Event Information table. An error occurs when I try to run it, saying that I need to define which table the field is from in the SQL code.
But then after I added clarification in the SQL, when I run the query it now prompts for a parameter for each of these fields. Why is this happening? I leave it blank, so a parameter has no impact on the query. How can I stop this?
Here's the SQL, after I added the table clarification:
Code:
SELECT (Sum(nz([Program_Cost])+nz([Millage_Fee])+nz([Auditorium_Cost])+nz([Cancel_Fee].[Event Information])-nz([Reimbursed_Amount].[Event Information]))) AS Total_Cost, [Shared Billing Information].Paid, [Shared Billing Information].Shared_Billing_ID, [Event Information].Shared_Billing_ID
FROM [Shared Billing Information] RIGHT JOIN [Event Information] ON [Shared Billing Information].Shared_Billing_ID = [Event Information].Shared_Billing_ID
[Code] ....
View 7 Replies
View Related
Aug 15, 2014
Do access VBA implements parameters passed to query strings in all following parameters?I've been working in ASP.NET/Razor C# and this would be an example of how it would be done:
Code:
db.Query("INSERT INTO threads (name, date_of_creation, user_id, area_id, user_group_id)" +
" VALUES(@0, @1, @2, @3, @4)",
Request["txtThreadTitle"],
DateTime.Now,
Session["user_id"],
area_id,
0
);
View 6 Replies
View Related
Jul 25, 2013
im working in MS Access 2007.what im trying to do is have a query run specific parameters if a check box is selected. So if the check box is selected than the query filters the "Tranche" column so that the only records that shown are records that have the "Tranche" coloumn = 1.
I know this can be done either in vba code or in the criteria section of a query but i dont know that appropriete language for either.
In vba code i was able to get this far. But..... i dont know how to call the criteria line from a query?
This is my very simple unfinished code.
My query is called [Tranch Query] and the column i want to filter with is call [Tranche]. The check box is called [Check0].
Private Sub Check0_AfterUpdate()
If Check0 = True Then
'How do i set the query criteria?????
End Sub
View 8 Replies
View Related
Nov 15, 2014
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
View 2 Replies
View Related
Jun 9, 2013
I have a table field that contains a lot of part numbers in different format. One could be with hyphen while others are without hyphen.
record#1 : 4535-300-34567
Record#2: 453530034567
Record#3: 4535-301-56721
In this case record# 1 & 2 are same part number only difference is hyphen.
I want to set my query parameter [Enter part number] such a way, when some one enter 453530034567 it should pull both the record (record#1 & 2).
View 5 Replies
View Related
Apr 6, 2013
I have a fact table which contains a list of products at many different Retail Prices. I want to band these products into groups based on Retail Price Bands.
I have created a second table with the fields Retail Price Band, Minimum Retail Price, Maximum Retail Price. This defines the banding structure.
I would like to join Retail Price with Retail Price Band based on the parameters in the second table but don't know where to begin.
View 3 Replies
View Related
Sep 16, 2013
iwhen i add a field to allow me to add the parameters for a search between to dates. the query will only count the ethnicity of people who complained on the same day and give the others as a single number. i need to allow the user to search between dates as to generate the data for a report.
View 3 Replies
View Related
Feb 9, 2015
I have a template csv file which has comes with headers. I now need to export multiple datas from my different tables into the csv file. I thought I would open an instance of excel, open the query as recordset (in VBA) and go through each record and finally use appExcel.saveAs as a CSV file. The approach doesnt look like it will look. I have looked into the DoCmd.Transfer text method but I cant seem to create a export specification because my query requires two parameters (startDate and endDate).
Secondly it is a huge template, over 700 fields and I will only be exporting around 40 fields so there will be huge number of empty fields. If this was a excel file, I would write few queries and write result from one query into the file then skip required columns and then write results from another query but I don't know if its possible with Docmd.write txt.
I am using access 2013 (Office 365 Pro) to perform all of this.
View 10 Replies
View Related
Feb 11, 2014
I am trying to create a query that will provide a field for each day of a month. However, I want the query to be able to work for any month that I want to run on based on a parameter. Basically I want this:
Day 1: Sum(IIF([ReleaseDate]=#[# of Month]/1/[# of Year]#,[GamesSold],0)
Day 2: Sum(IIF([ReleaseDate]=#[# of Month]/2/[# of Year]#,[GamesSold],0)
and so on for 31 fields.
This is not currently working.
View 8 Replies
View Related
Oct 18, 2013
I have a query and a form, and what I want to be able to do is have the user type in within the form the parameters for the query.
The part of the query that will hold the parameters is based on an amount (formatted as Currency), but I want the user to be able to enter >10 , =<100 or >100000 and get the correct results.
I have already set up the query and the form with unbound cells which are then referenced in the query I've tried just one cell where the user would enter >100000 or tried two cells where one cell would be for >,< etc and one cell for the value (which is formatted as currency), but that didn't work either.
The idea is that you enter the parameter and value then click on a button that runs a macro to export the query based or the user parameters, but everytime I try it I get a box appearing saying Property not Found.
View 1 Replies
View Related
Oct 21, 2013
How to make my queries run when they are in a navigation subform. I am having a hard time finding something on line that explains this process well? I keep getting prompted to enter a parameter when i go to the form in the navigation setup, I have the query running off a combobox in he stand alone form, and i can bypass the error if i make the form a popup, but i want to learn how to keep it as part of the navigation form itself.
View 5 Replies
View Related
Dec 10, 2013
I have a SQL query to gather data from a number of tables (balances, accounts, currencies)
Quote:
SELECT [tblBalances].[BalanceDate], [tblAccounts].[AccountNumber], [tblCurrencies].[Ccy], [tblBalances].[Amount], ([tblBalances].[Amount]*[tblRates].[FXRate]) AS AmountUSD
FROM (([tblBalances] INNER JOIN [tblAccounts] ON [tblBalances].[AccountID]=[tblAccounts].[AccountID]) INNER JOIN [tblCurrencies] ON [tblBalances].[CcyID]=[tblCurrencies].[CcyID]) INNER JOIN [tblRates] ON ([tblBalances].[BalanceDate]=[tblRates].[RateDate]) AND ([tblBalances].[CcyID]=[tblRates].[CcyID])
WHERE BalanceDate = #12/10/2013#
How do I add 'AmountUSD' to the WHERE clause (such that I can only return records above or below a certain value, for example)
Along the lines of :
Quote:
WHERE BalanceDate = #12/10/2013# AND AmountUSD>1000
I know it's an issue with referring to aggregated functions in the WHERE clause and you're supposed to use HAVING instead
View 12 Replies
View Related
Aug 26, 2013
I've got a code that allows me to select one or many names from a listbox on a form and return data relevant to the name(s) selected from a query. The following code is triggered by a button on the form...
Private Sub Toggle4_Click()
'Set it all up for CSM selection
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[code]....
(Toggle 10 goes to the code for the second listbox which has the same code with different tables refered to giving two selections in the query.)
What I want to do is replace the "warning if nothing found" with a code to show data against all the names in the list box if nothing is selected in the listbox.
View 13 Replies
View Related
Jun 17, 2013
I have a navigation form, a navigation subform, and then a subform. When I click the save button on the navigation subform, i need the data entered in two fields on the subform to save in a table. the subform is based on a query. This is what I currently have on the the button's onClick event:
Code:
Update data_tbl
Set [data_tbl].[Approved] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![CboAppd]
[data_tbl].[Comments] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![txtComments]
WHERE [data_tbl].[ID] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![ID]
View 3 Replies
View Related
Oct 23, 2014
how the Forms work I am trying to put some of them in Navigation Form and my commands does not work as they did in Form."Home app" is the navigation form, "Apeluri_neinchise" is the subform of "Home app" and "Combo1" is the criteria based on which a query shows a specific data.
What is the proper formula for query criteria?
[Forms]![Home app]![Apeluri_neinchise].[Form]![Combo1] (I tried this but it's not workink)
View 3 Replies
View Related
Apr 13, 2015
I'm working with a form in Access 2013 that uses the navigation buttons. I'm trying to have my criteria for a query link to a dropdown box on the form. I had no problems doing this in Access 2010 with normal forms, but I can't link the criteria, in the query to the Navigation buttons form box. I'm tried using
[Forms]![TheNavigationTab]![NavigationSubform].[Form]![Field]
And various forms of the above... but i still can't see to tell the query to find the critiera at this location...
View 1 Replies
View Related
Jun 7, 2013
I have a tabbed navigation form. I have a form on one of the tabs, [tab1frm] that a query that consists of 6 fields that are each from a different query.as the record source. This shows a percentage field, an image field, and a count field for current month and then then the same fields for year-to-date.
The problem is that when there are no records for the current month, the whole form [tab1frm] is blank. I read that if no records are returned this can happen, but since there are always records returned for year-to-date, I don't know why its happening. Is there any way to make blank fields show up or to show the most recent records so the form is never blank?
View 6 Replies
View Related
Jun 29, 2014
I have a 'master' navigation form called 'NPYWC'
On it, there is a subform called 'patient' - this has a number of subforms in the detail section (Linked on a one-to-one key).
When the patient form loads, I hide the detail section until a user either
A. Finds an existing client record or
B. Clicks the 'ADD NEW' button
The ADD NEW button opens a separate (pop up) form where the primary patient information is gathered. When the user clicks "Save" on the pop up, my VBA script ...
A. Creates all the one-to-one relationships that are required.
B. Updates the 'Find Patient' field to the newly created patient number
C. Finds the new record
D. Un-hides the detail section (This is what I cant get to work)
I have tried a number of things. The latest being
Forms![NPYWC]![NavigationSubform].Form![Section].[Detail].Visible = True
The rationale for hiding the detail section in the first place? The answer is twofold.
1. If the user simply creates an new patient, the three actions (A, B C above) don't always run/display the data properly. (Im not sure why? ) The pop up form seems to be a good working solution for me.
2. My users have a tendency to change data on the default patient. I have tried going to new record, but then they add new (often duplicate) patient records.
View 3 Replies
View Related
Apr 15, 2013
I have a main form with a continuous sub-form. On the main form I have a series of text boxes that I want to use as a makeshift status bar. The text boxes would be filled in if a value was entered into certain records on my sub-form.The problem I have is since the sub-form is continuous, how would I refer to the specific record on the sub-form that I want to check for a value?
View 6 Replies
View Related
Feb 5, 2015
I have Main Form is named MainFrm and it has
two Sub Forms :
- OrdersSubFrm
- DetSubFrm
I want :
if OrdersSubFrm is not contains any records DetSubFrm is not enabled
View 7 Replies
View Related
Jul 19, 2015
In my DB i would like to make a form that displays different calculated values based on other forms and queries like income running cost etc., but i do not know how to refer in an unbound control to value of a control in another form. I get always #names? error. However it worked when loaded that form i refered to. Is there a way to do it without loading the refered form?
View 3 Replies
View Related
