I have a table that has one field and I want to use this field as a query criteria . when i click on CRITERIA & BUILD, Access lets me select the table field and shows [tblBillRun]![Bill_Run] for the criteria but when I click RUN, it prompts me to ENTER PARAMETER VALUE. What am i doing wrong?
View RepliesI've been writing queries in the following format for years in Access 2003, but having recently transistioned to Access 2010, I've found the following sql doesn't work.transform
sum(s.value)
SELECT
s.sn, s.ln, s.pn, s.id, s.lat, s.point, s.supply_type, s.used, s.real, s.code, c.name
FROM
supply_points s
, codes c
WHERE
s.code = c.code
and s.id is not null
and s.code = 1075
and s.month >=[forms]![main]![gppstart ]
group by
s.sn, s.ln, s.pn, s.id, s.lat, s.point, s.supply_type, s.used, s.real, s.code, c.name
pivot
s.month
In Access 2010, this query returns the following error message:the Microsoft Access database does not recognize '[forms]![main]![gppstart]' as a valid field name or expression
Is this a common phenomena in Access 2010?
I have just upgraded from Access 2003 to 2010. Now I'm trying to relearn some of the small things I used to be able to. In 2003, I could just have a table highlighted and select "Insert, Query". It would then open a query design with that table. Is this possible to do this in 2010? Or do you have to open query design then add the table manually?
View 2 Replies View RelatedI need to set calendar control as criteria for date in VBA query. I cannot find Calendar control in ActiveX tools in Acc 2010. Where is it?
Date picker seams like very slick and simple solution but I can see it only in database. As it might be solution to my problem, can date picker be used on a form as criteria for VBA query?
I am using Access 2010. How do I prevent the object typed into the textbox on a queryform being written to the table. The result from the name typed into the textbox on my query form correctly produces the result from the query, and my macros then produce the correct report, which I can either print or close due to the controls in the heading of the report. However, when I view the table, the name typed (only) has been inserted into the correct field as a new record in the table. Is there a macro I can add (I assume to an event in the query form) to prevent this happening?
View 8 Replies View RelatedHere is what I am trying to do. I have a query with 2 fields. "Time In" & "Time Out". What I would like to happen is this. Whenever a character, let's say a "t", is entered into that field I would like the current time to populate that field. Right now we are actually typing in the time. I have the fields set up as DateTime fields currently.
View 10 Replies View RelatedI hid a query and now need to modify the fields, how can I unhide the Query in 2010?
View 1 Replies View RelatedSo... I have the pivot table with the following columns...
Sum of Numerator, Sum of Denominator, and a computed field for Rate
My Rate calculation is: iif(Denominator = 0, Null, Numerator/Denominator)...
I have at least 15 of these rates (numerator, denominator, rate) on the same report..it works fine, but my business analyst has clarified the Rate requirement that if the denominator is 0 then the Rate should display 0 (instead of Null)..
When I change my Rate computed field to iif(Denominator = 0, 0, Numerator/Denominator) and press the "Change" button all the numerators and denominators on the pivot table are blanked out... I've refreshed the pivot table and everything; but, I can't stop this from happening. why the heck can't Access' pivot table be as robust as Excel's ???
I am new to Access 2010. When working with a form, how do I display the field list? The list of fields for the table associated with that form.
View 1 Replies View Relatedand I have several queres using the same table. I was trying to add 2 columns and fields to my 1 querie. I do not use program much but I have it for my cattle. SO I was clicking around. Went to Table and went to add the field.I changed my Primary Key field then realized I should not have done that.I changed it back to "ID" and "Number" and added my fields. THEN I went to the one querie and added my columns and fields.However NOW the one querie I messed with has 30,888 rows as it just repeats the 20 or so rows over and over .The other queries do not and they use some of the same data "ROWS" from the table
View 1 Replies View RelatedI have played with this problem for 3 days and have come close but not quite solved it. My problem, I have several drivers delivering several orders, the orders are named 101, 102 and so on lets say to 150. Due to locations of the drivers, some deliver more orders then others. I want to be able to create a report that looks like
"Driver #1 101 - 106"
"Driver #2 107 - 110"
Driver 1 delivered 6 orders. Driver #2 delivered 4 orders and so on.
I have tried the 'count" which gives me the number of orders per driver but having trouble figure out the design of the calculation in the query.
I have a table with more than a million records. I want to add a new column with date equals to e.g.3/14/2012 for all the records. I am using update query, but it is super slow (taking more than a hour)..is there any other way to do this?
View 6 Replies View Related I am currently using INNER JOIN and GROUP BY to narrow down the RowSource of a combo box based on the value selected in the active combo box where the code is located "onClick".
The value being selected is a StoreID, This ID is matched against the AssetRegister to find all group names, The GroupID and GroupName are then retrieved from the AssetGroup table, then finally the list is grouped on the Group ID and Group Name.
I have tested this query in SQL Server Management Studio and it works without any issues, however when I use it as an inline query to adjust the row source of the combo box it returns no values.
Here is the SQL query:
Code:
SELECT AssetGroup.ID, AssetGroup.GroupName
FROM AssetGroup
INNER JOIN
(SELECT AssetRegister.AssetGroup, AssetRegister.Store
FROM AssetRegister
WHERE AssetRegister.Store=7) AS ar ON (ar.AssetGroup = AssetGroup.ID)
INNER JOIN Store ON Store.ID = ar.Store
GROUP BY AssetGroup.ID, AssetGroup.GroupName ORDER BY AssetGroup.GroupName
And here is the inline query applied to the RowSource:
Code:
AssetGroup.RowSource = "SELECT AssetGroup.ID, AssetGroup.GroupName FROM AssetGroup INNER JOIN " _
& "(SELECT AssetRegister.AssetGroup, AssetRegister.Store FROM AssetRegister WHERE AssetRegister.Store=" & StoreID & ") AS ar ON (ar.AssetGroup = AssetGroup.ID) " _
& "INNER JOIN Store ON Store.ID = ar.Store GROUP BY AssetGroup.ID, AssetGroup.GroupName ORDER BY AssetGroup.GroupName"
AssetGroup.Requery
Access 2010. This has worked before but I don't understand why this is not working for me now. When i select an item in a combo box in a form and click on a button to run a query with the results, the query is blank. If I run the query alone, it prompts for an item, I can type it in and it works. I have even tried the DoCmd on the combo box but still same results. Attached is a dummy down DB. If you run the query, it will prompt, select Paper or Rock, see results. But run the form, the drop down will not show the results. What am I missing?
View 3 Replies View RelatedUsing Access 2010: I have a query with four fields: ORG_NAME, PERS_NAME_LAST, CountOfORG_NAME, and BdMbrCount. There are a couple hundred companies in the database with 1-7 people associated with each company. I need to number each person so that they have a number, 1-7 in the MemberCount field of my query.
I have my query connected to VBA code.
I have experimented with code that I have found on the forum, just to see if I could get something to work and I am getting “Undefined function ‘BdMbrCount’ in expression. I am trying to pass [ORG_NAME],[PERS_NAME_LAST] to my function and assign the value of BdMbrCount to a new field in my query, BdMbrCount.
Code:
Function BdMbrNumber()
Dim qdf As DAO.QueryDef
Set qdf = CurrentDb.QueryDefs("YourBdMbrsRRecognizedQry")
'Set rst = CurrentDb.OpenRecordset("SELECT [ORG_Name],[PERS_NAME_LAST],[CountofORG_NAME], [BdMbrCount] FROM YourBdMbrsRRecognizedQry")
Dim ORG_NAME As String
[code]....
How do you put the Month on a form based on the data in a query?
View 1 Replies View Relatedis their a way to have a query to only show data on every monday in current month.
Month([datefield])=Month(Now()) And DateAdd("d",7,[datefield])
I am trying to work with Access 2010 to do some pretty simple stuff. I have two tables, one with around 500k rows, the other with around 150k rows. There aren't too many columns, less or around 20 for each table.
I am just trying to do a simple inner join and then create a table but every single time I do it gets about 20% done on the status bar in the bottom right and just hangs. The query itself takes no time to run but it can't create it as a table. Same thing happens if I try to export the query.
I have a table with a list of different government programs that products can take advantage of. Each of these programs has criteria such as "must use less than 1000W" or "lasts for 100 hours". Rather than have a column for each possible condition, I've created 3 fields that will accept any type of condition; Var1Condition (example: watts) , Var1Requirement (example: >=), and Var1Value (example: 50). I figured this would be the more efficient database design than to add 15-20 columns.
I then built a form that would where I could enter product attributes and would hopefully query my database and only return the programs for which the product would qualify. So I would have a field named "Watts" in which I would put the wattage of the product and then I would see which programs it would fall in.
In theory, it should be simple. I figured I could just find a way to combine my 3 criteria fields into one string "Forms!Search!watts >= 50" and then use that as a query filter, but I can't find a way to do it.
I have a value in an unbound field on a Form, which is 1234 OR 765 OR 356.
In the QBE criteria grid, I used builder to reference this form:
Forms!myform!myunboundfield
The column this is in is for the ID field, which is a number.
However, it is not filtering the data correctly. If I copy the above text and paste it into the QBE grid, then it will work. But when I reference it, it fails. If I change the value to just a number on my unbound field, it works. So the issue seems to be that its bringing across the text as a string and so perhaps effectively puts quotes around it when referencing it.
I have made a function returning True/False values. I used this function in a query and now it return value Error as well...Is there a way to set criteria to values received in that field (0/-1/#Error). I've tried putting Like 0, Like True with or without quotation mark.Also every workaround comes into play as long as it works.
View 2 Replies View RelatedI have a query where I prompt for a Report_Date to create a new field; Report_Date:[ Enter date for report]
Is it possible to use the result from this prompt as a criteria in a different field?
for example, Order_Date based on the criteria of <=[Report_Date]
I need to update the periodtype field in my table depending on different values in the field Formtype- I am looking to do this without having to use VBA. I have the following fields in a table - I want to update the value of the field Period_type as follows -
When Formtype is 10-Q, update Periodtype to "Quarterly"
When Formtype is 10-K, update Periodtype to "Annual"
The current value of Periodtype for both formtypes is "Semiannual"
Can I do this using only update query?
I have query with a calculate field to finds the next service due date but I'm having a problem getting it to only show services due dates in the next 30 days.for some reason I cant add a criteria date()-30...I have to calculate the next service it takes service intervals from maskservicemonths field then find the last service date and generates the next service due date NextService: DateAdd("m",[MaskServiceMonths],[FindLast]).
View 14 Replies View Related I want a query selecting records from table1 based upon a value in table2 -
table1 contains thousands of records - fields include VendorNo and VendorName
table2 contains a single record - fields include VendorSearchName (which is a "short name")
I am trying to create a query which lists all VendorNo and VendorName entries where VendorName contains VendorSearchName
eg. VendorSearchName = "Fred" will list VendorNames including "Fred Flinstone", "Big Fred" etc
I have three Queries and I need to export three queries into one workbook but different worksheet,
Currently I am using ExportWithFormatting , but the result came out is three different workbook .
Is there any way I can export to one workbook ?