Queries :: IIF Statement Query - Pull Information From A Table Based On Specified Weight
Aug 4, 2015
I am having a problem to get my query to run properly. I have a huge IIf statement that doesn't seem to be working but I am not sure what is wrong with it. What it is supposed to do is return a good, actionable, or poor based on a specified weight and an actual weight. So what the query does is pull information from a table based on the specified weight and then using that information it should give back the correct rating in the last column.
I need to know a query to pull information from two date fields into one. I have a BuriedStartDate field and an AerialStartDate field. In a third field I have PlacementStart. I would like to put the date into the PlacementStart field which ever is the oldest date bewtween the BuriedStartDate and AerialStartDate. It has been awhile since I have done any queries on Access 2007. I am completely self taught in Access.
My report is grouped by a Billing Group #...within each billing group there are sub invoice numbers that are tied to the main billing group # (they all have the same billing group # but different general invoice numbers). I need to pull data if one of the general invoice # invoice dates is greater than or equal to a specific date entered.
In other words: If a Billing Group # and one of the Invoice Dates is greater than or equal to a specific date entered then pull ALL GROUP data to report.
I would like to have a table update query populate cells in a field, based on an IIf statement (below), but states that the IIf statement arguments still need to be enclosed in parentheses. I don't understand what the problem is, I have two sets of opening / closing parentheses.
I have a form (form1) that will populate with records (table1) based on key fields of "Project Number" and at time-points we will update part of the record, and then we create a word document detailing the updates with a couple of other bits of information not in original record.
Basically I want it to go from the original form (form1) into another form (form2) (via a command button) taking the key field of "Project Number" where it will ask the bits of information that we don't need have already and the contact person.
I have got this to store in a different table (table2) using a key field of just "ID" from the original records (table1). A list of contact people are in a separate table (table3) using a key field of "contact name" which will include other details for them such as address and phone number.
So from "form2" I would like to produce a report that contains information form "table1" based on the "Project Number" and "table2" based on "ID" as just been generated and "table 3" which is based on "contact name".
So I want to pull information form the records based on the certain key fields but struggling for it to pull it successfully...
Got relationships between: "contact name" fields in both "table2" and "table3" "project number" fields in both "table1" and table2"
In a query for the report I have all the appropriate fields, but only have the "contact name" and "project number" from "table2" is this right? or do I need both in?
Or would it be easier to draw all this information into "form2" but don't really want to select that many drop down boxes or would it be able to pull it from the "contact name" and "project number" boxes????
I have 2 tables. One has employee info and the second has time data based on thresholds reached in the employee info. Obviously, a basic join will bring in all of the threshold records. How do I get it to only pull in the one that satisfies the threshold condition?
I am brand new to building a database.What I want is a database to store Quote, Job and Invoicing information. We receive quotes first and then they can, but don't always, turn into jobs. We can also receive a job without quoting it. We currently have two spreadsheets. One is for Quotes and the other is for Jobs.
QUOTES INFORMATION Quote # Date Customer Name Part # Part Name Quote Due Date Qty Lead Time Price Unit
JOBS INFORMATION Job # Qty Quote # Customer Name PO# Part # Part Name Est Hours Start Date Due Date Price
As you can see a lot of the information in the Quote spreadsheet is also used in the Job spreadsheet. (Bold represents duplicated items) We currently type the information into each spreadsheet.
Then there are different forms that are filled out for quotes and jobs that contain the information in the spreadsheets.Is there a way that I can have the QUOTE Table automatically populate the JOB Table information?
Is it possible to run a basic select query to pull records based on multiple strings entered by a user?
I have a query with field criteria - Like '*' & [Type In MMDBID:-] & '*'
This allows the user to input one MMDBID and the records are retrieved from the db.
I can also use the OR statement in the same field criteria "AB123" OR "BC123", and all records based on those values are pulled back.
But I cannot get the user to input multiple values and I tried amending the SQL string based on the OR criteria above
SQL statement (Like) is below :
SELECT tblFund.MMDBID, tblFund.[Investment Name], tblCodesLive.[IOE Code], tblCodesLive.[Uptix Code], tblFund.[Red Payment Deadline] FROM (tblFund INNER JOIN tblCodesLive ON tblFund.MMDBID = tblCodesLive.MMDBID) INNER JOIN tblContact ON (tblFund.MMDBID = tblContact.MMDBID) AND (tblCodesLive.MMDBID = tblContact.MMDBID) WHERE (((tblFund.MMDBID) Like '*' & [Type In MMDBID:-] & '*') AND ((tblFund.Editing)=False) AND ((tblFund.Closed_Fund)=False));
I am trying to run some diagnostics on my database. I thought a good place to start would be to look at all of the tables, the number of records each table holds, and each table's size. I have been able to find plenty of code on the web that loops through each table and provides the aforementioned data points, but the code only looks at local tables. SInce the database is split, I have a ton of tables linked to the back end that I am unable to get stats on. Any query or any code that can pull back end table stats?
I have a form with a check box. A query is run that looks at that check box and decides what the criteria are based on that. So, if the check box is checked, it should pull in all data in the field that is a Y. If it is not checked, i want it to pull all data (Y's and N's and blanks).
I am trying to build a Form that will show an estimate (then eventually will be moved to a project if customer and employee aggree to price and project) in a Form F_Estimates is a M_Customers(Customer_ID) (Based on a Table) and thier info in a Subform. Also is the "projected costs" from parts out of the Parts(Part_ID) (Based on another Table) in a second Subform as a list that I need to calculate $$$ in (Dang that still sounds evil and definately NOT understandable even after edit... so)
Here's some basic info
Tables
EstimatesandParts - Table EstimatesandParts_ID : Autonumber Estimate_ID : Number Part_ID : Number
Parts - Table Part_ID : Autonumber PartNumber : Text (not a number due to some part#s have letters in them) PartName : Text Unit Price : Currency Description : Text
Estimates - Table Estimate_ID : Autonumber InvoiceNumber : Text (again can have letters in it) EstimateDate : Date/Time EstimateTime : Date/Time Employee_ID : Number Customer_ID : Number ProblemDescription : Memo
Customers - Table Customer_ID : Autonumber FirstName : Text LastName : Text CompanyName : Text Address : Text City : Text Province_State : Text Postal_ZIPCode : Text (CDN Postal codes are letter num letter...)
you can see the link table in the EstimatesandParts Table
Now I want to use that link to populate a subform in the F_Estimates form
Forms
SF_Customers - SubForm
(all boxes atm are text boxes on this form till I figure out the Parts section then will use same base for this so I can pick any customer in the database to be the customer for this estimate. Also will have ctrl button for making new customer with customer form and a refresh on Focus Gain bit of code)
FirstName LastName CompanyName Address City Province_State Postal_ZIPCode
SF_Parts - SubForm Default View -Continuous Forms
(want it to be a list of parts that I can grab prices and descriptions from then in a bit of code to calculate a cost of parts)
Part_ID : Combo Box Control Source - Part_ID Row Source Type - Table/Query Row Source - SELECT Parts.Part_ID, Parts.PartNumber, Parts.PartName, Parts.UnitPrice, Parts.Description FROM Parts ORDER BY Parts.Description;
(Pulls info from the table Parts for input into a list of parts to be used on that project)
PartName : Text Box UnitPrice : Text Box
(here's where I run into problems due to the fact that the form is not based on the parts table but rather the link table EstimatesandParts so I can't propogate the info to the 2 other text boxes, ps I dont care if they cant be text boxes and have to be linked or some other type I'm not "set" just need to find out how to make it work )
(have tried a couple things to complete this task)
(works AWSOME ... for ONE ROW then propogates the second selection to the first and second and third selection to first second and third and so on ...)
(tried to make control source for the txtPartName to)
=Forms!Parts!Partname
(Doesnt exist .. akkk, cant use ActiveForm either as it doesn't focus on the SubForm but the MainForm ... cry)
(Combo Boxes Select Customer and Employee from list of present ones of each)
SF_Customers SF_Parts
(Both SubForms on the main form)
Now this is an Exerp from my entire Database I like to work on one small problem at a time and I have made this its own little database till I figure out the problem then I will bring the info I learn back into the rest of the database and go from there ...
Hope you can help I have a feeling I will need to make a recordset and go from there but I'm just not able to wrap my head around that for some reason
Thanks in advance for ANY and ALL help that I get from here
I have 3 tables invoice, customer and items. I need to create a query that will get the next invoice number from the invoice table and mark that invoice number in the items table for a set customer where the invoice field in the items table is blank.
The invoice table is now set up as a autonumber, therefore I need to append to get the last new number.
The items in the item table are unique and this is why I want to mark the invoice number in the item table field invoice.
I've got a query that uses a key from one table to pull back records from another.
My question is...
On the table with the key there is another field that I want to use to pull back data from the same table from above.
A bit more info...
Table one holds colleagues details Table two holds records
Within table one there are 2 different fields that hold different ID's for the same colleague, currently I run two different queries to pull all data - I want to know if I can simply run one query that will return every thing?
I have made a form based on a query that pulls information from 4-5 tables. I would like to be able to change information in those 4-5 tables by using that form, but I am unable to do it. I opened up the properties for the form and set "data entry" and "Allow edits" and "allow additions" and "allow subtractions" all to YES. That didn't help.
Is it possible to do this, since the form is based on a query? I couldn't figure out a good way to set up the form getting the information directly from the four tables. I'm not sure why it's been so difficult.
I have one table full of all of the various titles I have. The tables are related using those titles, and each table has a different sort of information for each record. So, the "main" table is "ALL TITLES," but when I go make a form, I can't get ALL TITLES to be the controlling table. It's very frustrating. But a query works beautifully--I just can't change anything.
(I would like to have the form be a "user-friendly" way for people to make changes.)
I have a 3rd party database where I have no control over how the data is entered. I've been given the task of creating a Crystal report that would need to gather data from two databases. The link between the two databases in my report would be on a quote number. In one database, the quote number is in it's own field. In the 3rd party database, the quote number is stored in a memo field along with other data. Here's an example:
The data I'm after is C7875 T7761 T6895 T7152A *No data from the 5th row since the data after the "T" isn't numerical
So far I'm thinking of using an IIF statement to check for the existance of a C or T, then if true, use a nested IIF statement within the first to check for numeric, if true, use the Mid function to pull out the quote number.
My first concern is this could become a complicated IIF statement and was wondering if there was another direction I should be looking in acheiving this.
My second concern is if I go with this method, some of the quote numbers have a space after them, some of them have no space after them, some may even have a "/" after them. How would I go about accomplishing this?
I have two tables: Table #1) [Request Table] Customers request our company to stock a certain Part Number with a minimum value. Ajax - P/N "NP4i" - Min "30".
Table #2) [Sales History] All sales purchased and the "Qty-Total" purchased. For simplicity Fields are limited.I created a CrossTab Query that displays from [Request Table] P/N's requested/ min values (Row Headings) then showing P/N's purchased [Sales History] Value="Qty-Total" Sum and
Column=Format([Invoice Date],"mmm/yyyy") group by, showing last twelve months. Ex: Customer name, Part Number, Minimum, May/2013, Apr/2013, Mar/2013 and so on. AJAX, NP4i, 30 4 21 5 and so on.
The Crosstab query list only requested Part Numbers that have at least One sale wihin the last twelve months.If there are NO sales, the crosstab query will NOT show this Part Number.My boss wants to see the requested Part Numbers that were never purchased along with the ones purchased.He wants to address the NO sales, yet they requested we stock that particular Part Number for them.
Is there any criteria I can use to force the Part Number field on the [Request Table] side to populate even though there were NO sales within the last twelve months?
I have a form that is used to book a new event for a client who is already in the database.Within that form I have a subform that is based on a query which displays information from that client's previous event. I did this using a solution found in the following thread: URL...It is based on pulling the second to last record that is related to the current client. It works perfectly when booking a new event that has taken place on a previous date. However, if the previous event occured on that same date (but at a previous time), it doesn't register.
I would prefer a query that would pull the record previous to the current one, instead of pulling the second to last record out of all that client's events.it would also mean that if more events are booked, then a past event is opened in a form, the sub forms in that form will display the event just prior to the current record.
I have a query built that gives me info per employee. I built a question into the criteria that ask for the employees name. When a person types the name results are given. If the person mispells the name, results are not given.
I have everyones name on a seperate table. How do i create a pull down menu on the query to choose the names?
I have one table let's call is table1. It contains about 5 columns with standard employee data with about 10,000 rows of data containing about 1,150 employees. All employees have multiple rows of data. There is one column titled JOB. I need to pull all rows of data for each employee ONLY if there is at the minimum one value for the employee in the JOB column. I do not want to pull employees that have no values in the JOB column. They can be excluded from the query.
Example of all record for one employee. I need to pull all rows of data ONLY if the employee has a value in the JOB column.
Name EE_ID JOB CAT EFF_DATE
John Doe 1006 CLERK F 01-JAN-2010 John Doe 1006 P 21-JAN-2010 John Doe 1006 CLERK P 01-FEB-2011 John Doe 1006 F 01-MAR-2011 John Doe 1006 P 01-APR-2011 John Doe 1006 CLERK F 01-JUL-2012
I have 9 seperate tables - each of the tables has similar headers
Claim # Agent Pass/Fail Request type Record Date
I have built relationships between all the tables. I am attempting have a singular query be run based on start and end dates under "record date" . I have the criteria already set. But when I run the Query no information is pulled. How do I get the query to pull this data from all 9 tables?
I am writing a module to send information to Excel, and the information is based on a Crosstab query. But I keep getting a "syntax error in the TRANSFORM statement".
Function Edt_Royalties() As Integer Dim AplicExcel As Excel.Application Dim Planilha As Excel.WorkSheet Dim stArq As String Dim DB As Database
I want the Query Criteria to pull its value from a control on a form.The form control either has data or is null. (My problems occur when the form control is Null). The field in the table either has data, is null or is blank.
Code: =IIf(IsNull([Forms]![FormName]![FormControl]),"" Or Is Null,[Forms]![FormName]![FormControl])
This works for the records with fields that are blank.
This works for the records with fields that have data.
Code: Like IIf(IsNull([Forms]![FormName]![FormControl]),"*",[Forms]![FormName]![FormControl])
This works for the records with fields that are Null or Blank if i drop the iif function but then i lose the ability to pull criteria data from the form control.
all using access 2010. I have a date field. I need to write a query to pull out dates with current year only. ex data: 1/1/10, 1/1/11, 2/1/12, 2/1/13. Need to pull all dates with current year which would be 2/1/13. Tried in query criteria of the date field: =Format(Now(),"yyyy") I received data mismatch. this is a date/time field.
I have DB used for inventory for many different categories. I have a table and form for the following: Location, Printers, Pc's and many more.
What i am trying to accomplish is to have a advanced search form that will display how many pc's and there makes and model from selecting the location name or Cost center from a combo box.
So an example would be I want to select MPP-WDF from the combo box click a button and it will return the number of PC and there makes of model's and some other information in a list of records.
I have a text file linked to this database, and I'm trying to create a Query that will pull all of the data out of this text file, and add a rank if two of the values match in multipe records.So in other words, when multiple records have the same [JOBNBR] , I want to evaluate the [TIMESTAMP] value to see if it is the smallest one, and so on.I don't want to create multiple queries to do this, is there any way to do this? Here's what I have:
Code: DDR: (Select count(*) from tblMyDataImport Where [tblMyDataImport].[TIMESTAMP] < [TIMESTAMP] AND [tblMyDataImport].[JOBNBR]=[JOBNBR] )
