I would like queries to do some calculations for me based on a field. The field in the form is a combo field and the user can choose either 1, 2 or 3. Based on the selection, I would like queries to generate some numbers for me.
This is what I have in mind but its not working.
Code : TEST RESULT: If([tlkpTEST].[RESULTID])=1, ([tlkpTEST].[RESULTID])*2, 100)
I am trying to add calculations to queries based on columns in the query... it seems to randomly expect 'Expression' or 'Group by' as column types, and Im having to create 3 sets of queries following on from each other to de-dupe data and allow filters on calculated values.
Also I've got a function which turns a date into a quarterly cohort, e.g. Oct 2013 -> 20134. I use ot on a lot of dates. I created a VBA function, CohortQ used as follows in queries:
Cohort: IIf Year([InputDate]) < 1990 or Year([InputDate]) > 2020, 0 CohortQ([InputDate]))
In the VBA, InputDate is defined as a date
Code:
Function CohortQ(InputDate As Date) As Integer
If InputDate = 0 Then
CohortQ = 0
Exit Function
End If
[Code] .....
But when I run it on a date field, it gives me a data mismatch error. I can't step through as it's working on 600K rows.
If I put the function into the query,
Cohort: IIf Year([InputDate]) < 1990 or Year([InputDate]) > 2020, 0 Year([InputDate])*10+DatePart("q",[InputDate]))
it works.
I've got a data entry form that is used to enter incoming waste consignment data. (I've attached a screen grab of the form) Each screen represents one record and the data is recorded in a table called "IncomingWaste". The top of the form (light blue) refers to the customer/producer of the waste. Most of that detail is held in another table on the db. The bottom (Dark Blue) part is used to record the consignment data. It gives the user a grid to enter the individual waste components within the consignment (choosing from Drop down menus for the various descriptive elements) Most crucially, the weight of each component is recorded.
I have a calculated field at the bottom which gives a Total weight for that consignment. It simply adds the weight fields together and delivers a total in the box at the bottom of the screen which displays the total weight in that consignment using "Nz([weight1])+Nz([weight2)]+ ...etc - which works fine on the form. However, I can't seem to get this calculated total recorded and appended to each record in the table and I assume it must be re-calculated each time the screen loads (?)
The main issues is.... I need to create a report which adds the total weights from each customer over a monthly/quarterly period and I simply cannot seem to do it.
I have created the report which groups all the consignments from each customer and lists them in date order, but I can't identify or define the method I need to use to collect that Total Weight calculation from each consignment record and add them up to give a grand total for that customer for a particular period. I'm assuming if I can crack the first part and get the total recorded in the table, then I can call the value into the report.
I am trying to , create a field using the IIf function that will display a $250 bonus for agents every time they sell a car for at least $20,000. Otherwise, the function will return a 0. Name the field Bonus. I put in Bonus: IIf(SalePrice >= "20,000" Then + "250",True, 0) and it is saying that I have an improper syntax.
View 2 Replies View RelatedWould I use an update query or function to complete my task?
Task: Automatically update [Status] based on DateDiff calculation of [RequestDate] and [DueDate]
Issue: [Status] can be one of 6 values, the user can manually select Review or Completed.
[Status] values: Review; Completed; Due in 24; Due in 24-48; Beyond 48; Over Due
Query: Below is the query I just started to ignore the calculation if either Review or Completed exist.
Expr1: IIf([Status]="Review",[Status],IIf([Status]="Completed",[Status],DateDiff('d',[RequestDate],[DueDate])))If the value from above DateDiff equals to the below, I want to update the [Status] field to the [Status] value.
Due in 24 = (0-1)
Due in 24-48 = (2-3)
Beyond 48 = (greater than or equal to 4)
Over Due= (-1)
I have a form with a subform in a navigation menu. Something like:
Navigation Form
NavigationSubform
ParentForm (header data and some unbound calculation fields)
Subform (Multiple lines tied to query)
I have some fields in the ParentForm (i.e PF1, PF2) that would effect the values on the Subform (i.e. SF1, SF2). Also, there are some user editable values on the subform that will calculate the remaining fields on the subform (still using data from parentform).
My calculations work fine for the changes made on the subform. However I need to be able to calculate all the children lines on the subform when the form loads or a change is made to certain fields on the parentform. My On_Current event only wants to recalculate the first line.
Parent Form
PF1=10
PF2=3
Subform QTY ADJ SF1 SF2
Line 1 5 .05 10.6 112.89
Line 2 8 .14 10.38 105.15
...
Line N
SF1=PF1+(PF2/QTY)
SF2=SF1*(SF1+ADJ)
So if PF1 or PF2 were changed then all the lines is subform would recalc SF1 and SF2. If changes were made to QTY or ADJ, then that line would recalc SF1 and SF2.
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
I have a query in design view that consists of two calculated fields at the moment. One of the calculated fields is supposed to add one year onto a value from another date/time field called "Last_Date."
The expression I've written in the "Field:" box in Query design view is
Expr 2: DateAdd('yyyy',1,[Last_Date])
When I try to run the Query it doesn't work! Access just prompts me to enter a parameter value for Last_Date.
I have two tables that are joined - called A and B. A has two fields, "PLACE" and "RAND" and is joined to B via field "RAND". Other than "RAND", B has several fields named 01 TOTAL, 02 TOTAL, 03 TOTAL, etc...for about 60 fields.
The "PLACE" field in table A has data that is 01, 02, 03, ect.... How do I structure a query so that whatever "PLACE" is, I can match the XX TOTAL value? In other words, i need to have the query field header be somehow dependent on the value in "PLACE".
Is this even possible?
I have a query with a Date field for EndDate (the dates for end-of-week, Fridays in our case) and another field for Sales (number of sales, not dollars).I want to add 4 calculated fields that represent weeks and have the Sales appear in the correct column (field) for that date.So I will have columns for 10 July 15, 17 July 15, 24 July 15 and 31 July 15 and I want the Sales for each record to land in the correct date column, based on the EndDate column. (The 4 fields is just for the sake of the example, I will actually be having dozens of these calculated date fields).I tried to do it by setting up the 4 calculated fields like:
10Jul15: Sales
and then adding Criteria like:
EndDate = #10/07/2015#
It doesnt work.
I have this linked table query from a OBDC and I need to be able to filter out specific dates in that query. The dates in the table were in text format and I converted the dates using the CDate function. I wanted to filter the query to a single date and always I get the Datatype mismatch in criteria expression error.
However, filtering dates does work only when there are other specifications in the criteria fields (e.g. if I specify a date and and name). My SQL code in error looks like this:
SELECT
purch_hist.PUITM AS ITEM,
purch_hist.PUPO AS PO,
purch_hist.PUQTY AS QTY_RECEIVED,
CDate([purch_hist.PURDT]) AS RECEIPT_DATE,
itmcnt.ITBYR AS BUYER,
purch_hist.PUCST AS UNIT_COST,
vendor.NVNO AS VENDOR NO,
[code]...
This query works fine with a non converted date field, however the dates I need are in text format and need to be converted since I do not have permissions to edit the tables.
I am importing an excel text field into a table. I am then appending the data to another table. I am having a hard time with the Cdate function
Excel Date Field:
YYYY.MM.DD HH:MM:SS
Example Value:
2014.04.21 18:24:30
My Query Code:
NewDate: CDate(Left([DateQ],4)+"/"+Mid([DateQ],6,2)+"/"+Right([DateQ],2))
My Query Result:
4/30/2014
What it should be:
04/21/2014
I was wondering if it is possible to determine weather to show a field based on the values from another field.
Field1, SHOW_Field1, Field2, SHOW_Field2
Field1 and Field are text, SHOW_Field1 and SHOW_Field2 are Boolean values
So if SHOW_Field1 is true, then show Field1 in the query else hide. I was wondering how to do this, I seem to not be able to do this for some reason.
I have solved the problems getting values on the subform. I have not in getting values on the subform.For instance, on the one titled phone use the formula in the tutorial is:
=[sbfCustomerRoomUse].[Form]![txtTotalPhoneUse]
#Error results when the doc is put into a form mode.
Now when I input each value in the equation above separately.I still get no entry.
For " = sbfCustomerRoomUse" , I get #Error;
and for "= txtTotalPhoneUse", I get #Name.
CustomerRoomUse and txtTotalPhoneuse are from the subform that was dropped into the customer form in a previous step. It shows that explicitly when designed sbfCustomerRoomUse on the main that CustomerRoomUse come from a subform. This does not seem to need to be done with txtTotalPhoneuse, and I am not sure why. Neither one gives me a desired calculation result.
I'm trying to build a query that groups data by a code that is six digits. however, I only want to consider the first 4 digits when grouping by. (ex. table has code 100023 and I only want to group by 1000). Is there a way to do this within a query instead of modifying the table itself?
View 1 Replies View RelatedIs Access SQL able to do this:I want the value from a particular column, whose name is derived from the value in the field of another column?
Eg.
Col1 Col2 Col3 Col4 Col5
1 ABC 234 Col2 ABC
2 BCD 345 Col3 345
3 CDE 456 Col2 CDE
4 DEF 567 Col2 DEF
5 EFG 678 Col3 678
6 FGH 789 Col2 FGH
As you can see, I want the value in column 5 to be derived from the value in Column 4.Is this possible to be done in SQL.
I tried writing a SQL query to produce the list of details in year wise DESCENDING order for the input - Agent ID.
In addition to that I need to get the sum of amount fields year wise in the report. How to achieve it???.
Find the attached report for better clarification.
First three column in the attachment is the outcome of the below listed query. Whereas the fourth column is the expected result which needs to be included..
Code:
SELECT CessioneCredito.Data_Movimento, CessioneCredito.Anno, CessioneCredito.Importo FROM CessioneCredito
WHERE (((CessioneCredito.ID_Agente)=[Reports]![R_StoricoCessCredAg]![ID_Agente]))
ORDER BY CessioneCredito.Data_Movimento DESC;
How to alter the code in order to provide the SUM of Importo field every year.???
I am trying to write a query that will return all records whose field expiration_date meets my criteria. The criteria is
If expiration_date - 5 years < today's date then.... do you subtract the total days? months? Any help would be appreciated.
Thanks in advance,
Mark
How to implement YTD calculations in Access.
Current table:
Property Month RevenueA Jan '13 100
A Feb '13 50
B Jan '14 200
B Feb '14 300
Desired output:
Property Month Revenue YTD revenue
A Jan '13 100 100
A Feb '13 50 150
B Jan '14 200 200
B Feb '14 300 500
I am new to Access programing and have not been able to figure out a query/macro to execute this.
I have a query that I run to extract some values for calculations. Its run on an event based on a dropdown selection. At the moment, I run via:
Code:
DoCmd.OpenQuery "CallMidprice"
and then close it. this seems to take more time than is necessary when I only want to refresh the results.Open query without close, switches to the table but doesn't update until I press F5.When I try requery I get an error. "Runtime error '2109': There is no field named 'CallMidprice' in the current record.
Requery without 'Callprice' seems to requery my form.
I need to do a calculation on the RESULTS of a query. Each record in the table I'm querying has a date stamp. I have a query that produces a list of the newest records for each machine. I want to calculate how old each of those records is based on today's date.
So far when I try to include the calculation in that query, it returns all the records instead of the newest ones. This makes me think I'm doing something fundamentally incorrect. The calculation is affecting the query results where I just want to do the calculation on the results. What I'm trying to ultimately do is have a way for the users to see a list of machines that are overdue for a certain procedure. I was thinking of putting a button on a form that will run the query and present the list, perhaps with some conditional formatting highlighting the machines that are overdue, etc. Do I need to just use 2 queries?
I have a seating chart with 33 tables. Under each table there is a number that represents seats taken. I want to do a query that changes the number when it is a certain value. For example, when the value is null I want it to say "Empty", when the value is 10 I want it to say "Full" and when the value is over 10 I want it to say "Over". If the value is 1-9 I want to leave it as is.I know how to accomplish one at a time but not all three together. I've been useing:
Nz([Table#],"Empty")
IIf([Table#]=10,"Full",[Table#])
IIf([Table#]>10,"OVER",[Table#])
[code]....
the relevant fields look something like this:
TellerNum - Date - Field1 - Field2 - Field2
I need a way for my query to take all rows with the same TellerNum and add Field1, Field2, and Field3 together for those records. So, there may be 20 records with the same TellerNum, and I need Field 1, 2, and 3 to be added together and then totaled for all 20 records to give me 1 grand total. I need this to be done for each TellerNum, so that the results will be a grand total for each TellerNum. So, the results may look something like this:
TellerNum 1: 486
TellerNum 2: 300
TellerNum 3: 240
etc..
I have a field in my query which returns results based on a formula that is a function of other fields. The results are: Pass and Fail. I want to make a query that returns only Fail rows. When I enter Fail as the criteria, a parameter box pops up requesting information be entered before continuing.
View 1 Replies View Related I would like to know what criteria is used to return records based on a field with data type attachment.
I am using "IsNull" and "IsEmpty" but neither of these work.
I can do it using multiple queries but I would love to find a way to do it in a single query..I have formulated a couple sample tables to show what my source data looks like and the result I would like to get. (See below)
I have a table with items and pricing. Each item will have multiple lines showing the various prices with another field determining what the price is related to.I would like to query the table to output a table showing a single item with the various pricings each in a field. To toss another variable into the mix there are multiple sets of data per item based on a dataid field. So the source has , Item,, Type, Price and dataID. I want to show Item, Price1, Price2,Price3, for a specific itemID.
Source Data
itemtypepricedataID
10115.01aaa
10126.75aaa
10139.95aaa
10227.25aaa
102313.25aaa
103119.95aaa
10327.25aaa
[code]...
I would like to filter for only the aaa.how to do it in a single query.